The compilation of drivers/acpi/pci_root.c fails if
CONFIG_PCIEPORTBUS is unset.  Fix the problem.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 9cd03144 (ACPI / ACPICA: Fix global lock acquisition) forgot to
initialize the spinlock it added.  Fix that.
Reported-and-tested-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: restore multiple bd_link_disk_holder() support
  block cfq: compensate preempted queue even if it has no slice assigned
  block cfq: make queue preempt work for queues from different workload

It's indicative of a real problem, and it actually triggers with
autofs4, but the BUG_ON() is excessive.  The autofs4 case is being fixed
(to only set d_op in the ->lookup method) but not merged yet.  In the
meantime this gets the code limping along.
Reported-by: NAlex Elder <aelder@sgi.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  GRETH: resolve SMP issues and other problems
  GRETH: handle frame error interrupts
  GRETH: avoid writing bad speed/duplex when setting transfer mode
  GRETH: fixed skb buffer memory leak on frame errors
  GRETH: GBit transmit descriptor handling optimization
  GRETH: fix opening/closing
  GRETH: added raw AMBA vendor/device number to match against.
  cassini: Fix build bustage on x86.
  e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs
  e1000e: update Copyright for 2011
  e1000: Avoid unhandled IRQ
  r8169: keep firmware in memory.
  netdev: tilepro: Use is_unicast_ether_addr helper
  etherdevice.h: Add is_unicast_ether_addr function
  ks8695net: Use default implementation of ethtool_ops::get_link
  ks8695net: Disable non-working ethtool operations
  USB CDC NCM: Don't deref NULL in cdc_ncm_rx_fixup() and don't use uninitialized variable.
  vxge: Remember to release firmware after upgrading firmware
  netdev: bfin_mac: Remove is_multicast_ether_addr use in netdev_for_each_mc_addr
  ipsec: update MAX_AH_AUTH_LEN to support sha512
  ...

* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux: (62 commits)
  nfsd4: fix callback restarting
  nfsd: break lease on unlink, link, and rename
  nfsd4: break lease on nfsd setattr
  nfsd: don't support msnfs export option
  nfsd4: initialize cb_per_client
  nfsd4: allow restarting callbacks
  nfsd4: simplify nfsd4_cb_prepare
  nfsd4: give out delegations more quickly in 4.1 case
  nfsd4: add helper function to run callbacks
  nfsd4: make sure sequence flags are set after destroy_session
  nfsd4: re-probe callback on connection loss
  nfsd4: set sequence flag when backchannel is down
  nfsd4: keep finer-grained callback status
  rpc: allow xprt_class->setup to return a preexisting xprt
  rpc: keep backchannel xprt as long as server connection
  rpc: move sk_bc_xprt to svc_xprt
  nfsd4: allow backchannel recovery
  nfsd4: support BIND_CONN_TO_SESSION
  nfsd4: modify session list under cl_lock
  Documentation: fl_mylease no longer exists
  ...

Fix up conflicts in fs/nfsd/vfs.c with the vfs-scale work.  The
vfs-scale work touched some msnfs cases, and this merge removes support
for that entirely, so the conflict was trivial to resolve.

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (27 commits)
  omap4: Fix ULPI PHY init for ES1.0 SDP
  omap3: beaglexm: fix power on of DVI
  omap3: igep3: Add omap_reserve functionality
  omap3: beaglexm: fix DVI reset GPIO
  omap3: beaglexm: fix EHCI power up GPIO dir
  omap3: igep2: Add keypad support
  omap3: igep3: Fix IGEP module second MMC channel power supply
  omap3: igep3: Add USB EHCI support for IGEP module
  omap3: clocks: Fix build error 'CK_3430ES2' undeclared here
  arm: omap4: pandaboard: turn on PHY reference clock at init
  omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  omap2plus: voltage: Trivial linking fix for 'EINVAL' undeclared
  omap2plus: voltage: Trivial linking fix 'undefined reference'
  omap2plus: voltage: Trivial warning fix 'no return statement'
  omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  arm: omap: gpio: don't access irq_desc array directly
  omap2+: pm_bus: make functions used as pointers as static
  OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+
  OMAP2+: TWL: include pm header for init protos
  OMAP2+: TWL: make conversion routines static
  ...

Fix up conflicts in arch/arm/mach-omap2/board-omap3beagle.c ("DVI reset
GPIO" vs "use generic DPI panel driver")

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix ia64 build failure in pmdp_get_and_clear

Fixes the following:
1. POLL should not enable IRQ when work is not completed
2. No locking between TX descriptor cleaning and XMIT descriptor handling
3. No locking between RX POLL and XMIT modifying control register
4. Since TX cleaning (called from POLL) is running in parallel with XMIT
   unnecessary locking is needed.
5. IRQ handler looks at RX frame status solely, this is wrong when IRQ is
   temporarily disabled (in POLL), and when IRQ is shared.
6. IRQ handler clears IRQ status, which is unnecessary
7. TX queue was stopped in preventing cause when not MAX_SKB_FRAGS+1
   descriptors were available after a SKB been scheduled by XMIT. Instead
   the TX queue is stopped first when not enough descriptors are available
   upon entering XMIT.

It was hard to split up this patch in smaller pieces since all are tied
together somehow.

Note the RX flag used in the interrupt handler does not signal that
interrupt was asserted, but that a frame was received. Same goes for TX.
Also, IRQ is not asserted when the RX flag is set before enabling IRQ
enable until a new frame is received. So extra care must be taken to
avoid enabling IRQ and all descriptors are already used, hence dead lock
will upon us. See new POLL implementation that enableds IRQ then look at
the RX flag to determine if one or more IRQs may have been missed. TX/RX
flags are cleared before handling previously enabled descriptors, this
ensures that the RX/TX flags are valid when determining if IRQ should be
turned on again.

By moving TX cleaning from POLL to XMIT in the standard case, removes some
locking trouble. Enabling TX cleaning from poll only when not enough TX
descriptors are available is safe because the TX queue is at the same time
stopped, thus XMIT will not be called. The TX queue is woken up again when
enough descriptrs are available.

TX Frames are always enabled with IRQ, however the TX IRQ Enable flag will
not be enabled until XMIT must wait for free descriptors.

Locking RX and XMIT parts of the driver from each other is needed because
the RX/TX enable bits share the same register.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Frame error interrupts must also be handled since the RX flag only indicates
successful reception, it is unlikely but the old code may lead to dead lock
if 128 error frames are recieved in a row.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A new SKB buffer should not be allocated when the old SKB is reused.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is safe to enable all fragments before enabling the first descriptor,
this way all descriptors don't have to be processed twice, added extra
memory barrier.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When NAPI is disabled there is no point in having IRQs enabled, TX/RX
should be off before clearing the TX/RX descriptor rings.
Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unfortunately, not all CONFIG_OF platforms provide
pci_device_to_OF_node().

Change the test to CONFIG_SPARC for now to deal with
the build regressions.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ensure a new callback is added to the client's list of callbacks at most
once.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Implement __pmd macro for ia64 too.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915/lvds: Add AOpen i915GMm-HFS to the list of false-positive LVDS
  agp/intel: Fix device names of i845 and 845G
  drm/i915: Disable GPU semaphores on SandyBridge mobile
  drm/i915/execbuffer: Clear domains before beginning reloc processing
  drm/i915/execbuffer: Reorder relocations to match new object order
  drm/i915: Fix error handler to capture the first batch after the seqno
  drm/i915: Add a module option to override the use of SSC
  drm/i915/panel: The backlight is enabled if the current value is non-zero
  drm/i915/debugfs: Correct format after changing type of err object 'size'

Commit e09b457b (block: simplify holder symlink handling) incorrectly
assumed that there is only one link at maximum.  dm may use multiple
links and expects block layer to track reference count for each link,
which is different from and unrelated to the exclusive device holder
identified by @holder when the device is opened.

Remove the single holder assumption and automatic removal of the link
and revive the per-link reference count tracking.  The code
essentially behaves the same as before commit e09b457b sans the
unnecessary kobject reference count dancing.

While at it, note that this facility should not be used by anyone else
than the current ones.  Sysfs symlinks shouldn't be abused like this
and the whole thing doesn't belong in the block layer at all.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMilan Broz <mbroz@redhat.com>
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI/PM: Report wakeup events before resuming devices
  PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
  PCI: sysfs: Update ROM to include default owner write access
  x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL
  x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available
  PCI/ACPI: Request _OSC control once for each root bridge (v3)
  PCI: enable pci=bfsort by default on future Dell systems
  PCI/PCIe: Clear Root PME Status bits early during system resume
  PCI: pci-stub: ignore zero-length id parameters
  x86/PCI: irq and pci_ids patch for Intel Patsburg
  PCI: Skip id checking if no id is passed
  PCI: fix __pci_device_probe kernel-doc warning
  PCI: make pci_restore_state return void
  PCI: Disable ASPM if BIOS asks us to
  PCI: Add mask bit definition for MSI-X table
  PCI: MSI: Move MSI-X entry definition to pci_regs.h

Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the
meantime been converted to not use legacy PCI power management, and thus
no longer use pci_restore_state() at all (and that caused trivial
conflicts with the "make pci_restore_state return void" patch)

* git://git.infradead.org/battery-2.6: (21 commits)
  power_supply: Add MAX17042 Fuel Gauge Driver
  olpc_battery: Fix up XO-1.5 properties list
  olpc_battery: Add support for CURRENT_NOW and VOLTAGE_NOW
  olpc_battery: Add support for CHARGE_NOW
  olpc_battery: Add support for CHARGE_FULL_DESIGN
  olpc_battery: Ambient temperature is not available on XO-1.5
  jz4740-battery: Should include linux/io.h
  s3c_adc_battery: Add gpio_inverted field to pdata
  power_supply: Don't use flush_scheduled_work()
  power_supply: Fix use after free and memory leak
  gpio-charger: Fix potential race between irq handler and probe/remove
  gpio-charger: Provide default name for the power_supply
  gpio-charger: Check result of kzalloc
  jz4740-battery: Check if platform_data is supplied
  isp1704_charger: Detect charger after probe
  isp1704_charger: Set isp->dev before anything needs it
  isp1704_charger: Detect HUB/Host chargers
  isp1704_charger: Correct length for storing model
  power_supply: Add gpio charger driver
  jz4740-battery: Protect against concurrent battery readings
  ...

flush_scheduled_work() is going away.  afs needs to make sure all the
works it has queued have finished before being unloaded and there can
be arbitrary number of pending works.  Add afs_wq and use it as the
flush domain instead of the system workqueue.

Also, convert cancel_delayed_work() + flush_scheduled_work() to
cancel_delayed_work_sync() in afs_mntpt_kill_timer().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

rxrpc_workqueue isn't depended upon while reclaiming memory.  Convert
to alloc_workqueue() without WQ_MEM_RECLAIM.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fscache_submit_exclusive_op() adds an operation to the pending list if
other operations are pending.  Fix the check for pending ops as n_ops
must be greater than 0 at the point it is checked as it is incremented
immediately before under lock.
Signed-off-by: NAkshat Aranya <aranya@nec-labs.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin

* 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin:
  kernel: fix hlist_bl again
  cgroups: Fix a lockdep warning at cgroup removal
  fs: namei fix ->put_link on wrong inode in do_filp_open

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
  mfd: ab8500-core chip version cut 2.0 support
  mfd: Flag WM831x /IRQ as a wake source
  mfd: Convert WM831x away from legacy I2C PM operations
  regulator: Support MAX8998/LP3974 DVS-GPIO
  mfd: Support LP3974 RTC
  i2c: Convert SCx200 driver from using raw PCI to platform device
  x86: OLPC: convert olpc-xo1 driver from pci device to platform device
  mfd: MAX8998/LP3974 hibernation support
  mfd/ab8500: remove spi support
  mfd: Remove ARCH_U8500 dependency from AB8500
  misc: Make AB8500_PWM driver depend on U8500 due to PWM breakage
  mfd: Add __devexit annotation for vx855_remove
  mfd: twl6030 irq_data conversion.
  gpio: Fix cs5535 printk warnings
  misc: Fix cs5535 printk warnings
  mfd: Convert Wolfson MFD drivers to use irq_data accessor function
  mfd: Convert TWL4030 to new irq_ APIs
  mfd: Convert tps6586x driver to new irq_ API
  mfd: Convert tc6393xb driver to new irq_ APIs
  mfd: Convert t7166xb driver to new irq_ API
  ...

Make wakeup events be reported by the PCI subsystem before attempting to
resume devices or queuing up runtime resume requests for them, because
wakeup events should be reported as soon as they have been detected.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

After recent changes related to wakeup events pm_wakeup_event()
automatically checks if the given device is configured to signal wakeup,
so pci_wakeup_event() may be a static inline function calling
pm_wakeup_event() directly.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The PCI sysfs ROM interface requires an enabling write to access the ROM
image, but the default file mode is 0400.  The original proposed patch
adding sysfs ROM support was a true read-only interface, with the
enabling bit coming in as a feature request.  I suspect it was simply an
oversight that the file mode didn't get updated to match the API.
Acked-by: NChris Wright <chrisw@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This functionality is known to be incomplete, so discourage its use in
general-purpose kernels.

The only reason to use this driver is to support PCI hotplug on CNB20LE-
based machines that don't have ACPI, and there are very few such
systems.

Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The broadcom_bus.c quirk was written (without benefit of documentation)
to support PCI hotplug on an old system that doesn't have ACPI.  As
such, we should only use it when the system doesn't have ACPI.

If the system does have ACPI and we need the host bridge description, we
should get it from the ACPI _CRS method.  On machines older than 2008,
we currently ignore _CRS, but that doesn't mean we should use
broadcom_bus.c.  It means we should either (a) do what we've done in the
past and assume everything in the PCI gap is routed to bus 0 (so hotplug
may not work), or (b) arrange to use _CRS.  This patch does (a).

Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109Acked-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Move the evaluation of acpi_pci_osc_control_set() (to request control of
PCI Express native features) into acpi_pci_root_add() to avoid calling
it many times for the same root complex with the same arguments.
Additionally, check if all of the requisite _OSC support bits are set
before calling acpi_pci_osc_control_set() for a given root complex.

References: https://bugzilla.kernel.org/show_bug.cgi?id=20232Reported-by: NOzan Caglayan <ozan@pardus.org.tr>
Tested-by: NOzan Caglayan <ozan@pardus.org.tr>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch enables pci=bfsort by default on future Dell systems.
It reads SMBIOS type 0xB1 vendor specific record and sets pci=bfsort
accordingly.

Offset  Name    Length  Value   Description

04      Flags0  Word    Varies  Bits 9-10
                                - 10:9 = 00  Unknown
                                - 10:9 = 01  Breadth First
                                - 10:9 = 10  Depth First
                                - 10:9 = 11  Reserved

1. Any time pci=bfsort has to be enabled on a system, we need to add the
   model number of the system to the white list. With this patch, that
   is not required.

2. Typically, model number has to be added to the white list when the
   system is under development. With this change, that is not required.
Signed-off-by: NJordan Hargrave <jordan_hargrave@dell.com>
Signed-off-by: NNarendra K <narendra_k@dell.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] MAINTAINERS: Update zcrypt driver entry
  [S390] Randomize PIEs
  [S390] Randomise the brk region
  [S390] Add is_32bit_task() helper function
  [S390] Randomize lower bits of stack address
  [S390] Randomize mmap start address
  [S390] Rearrange mmap.c
  [S390] Enable flexible mmap layout for 64 bit processes
  [S390] vdso: dont map at mmap_base
  [S390] reduce miminum gap between stack and mmap_base
  [S390] mmap: consider stack address randomization
  [S390] Update default configuration
  [S390] cio: path_event overindication after resume

Signed-off-by: NKnut Petersen <knut_petersen@t-online.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

They got mixed up when the switch was converted to a table in 2007.
Signed-off-by: NOswald Buddenhagen <ossi@kde.org>
[ickle: minor changes for 2.6.37+]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>