- 20 7月, 2007 40 次提交
-
-
由 Takashi Iwai 提交于
The recent fix for STAC92xx surround outputs broke the input pin setting for shared line-in and mic jacks. This patch fixes the breakage. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Nicola Fagnani 提交于
Basic audio support for the iMac 24'' model released on 09/2006, including headphone jack detection with automatic speaker muting. This iMac uses the Realtek ALC885 codec, not a Sigmatel one as in other models. Functionality has been tested for internal speakers, headphone and microphone. Signed-off-by: NNicola Fagnani <nicfagn@iol.it> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
Without the proper model setting, the Asus P5LD2 rear outputs remain completely silent unlike other systems where the front speakers usually work. This patch adds the P5LD2 to the quirk table. Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
This card is just a normal SB Live 24bit, but under a different marketing name. Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 James Courtier-Dutton 提交于
Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fixed PM resume of cs46xx devices. It now restores properly the DSP image and kick-off the DSP. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Matthew Ranostay 提交于
Added support for some boards with SPDIF in/out, and cleaned up the GPIO enable function. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Clemens Ladisch 提交于
Convert the snd_assert()s to simple if()s to prevent crashes when one of the timer instance ioctls is called before the file is bound to a timer device. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Yoann Padioleau 提交于
Parse error in ifdef or bad use of macro. Signed-off-by: NYoann Padioleau <padator@wanadoo.fr> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
HP dx2200 and dx2250 use Micro-Star International (MSI) motherboards (models MS-7254 and MS-7297 respectively) with an ALC862 codec in threestack configuration. Adding this quirk allows correct 5.1 sound output in these systems. Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
Rename ALC888_HP_NETTLE and ALC888_HP_LUCKNOW models to the more generic names ALC888_6ST_HP and ALC888_3ST_HP since HP seems to be consistent in the wiring of their 3stack and 6stack ALC888-based systems. Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
This patch fixes 5.1 surround output for the HP Samba using the same quirk as the HP Lucknow. If HP machines are uniform in their wiring, we should rename ALC888_HP_NETTLE to ALC888_6ST_HP and ALC888_HP_LUCKNOW to ALC888_3ST_HP for generic HP 6stack and 3stack configurations. Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
Add line-in to the list of LG LW20 capture sources. Also fix the LG LW pin assignment list comment. Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Thibault Le Meur 提交于
Fixed AC3 interface in device_setup=0x00 mode thanks to Hakan Lennestal and updated documentation Signed-off-by: NThibault Le Meur <Thibault.LeMeur@supelec.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Matthew Ranostay 提交于
Added support for line out controls for STAC9202 cards, and fixed issue where master mixer control was being created twice for headphone and speaker outs. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Matt Reimer 提交于
Make s3c24xx_i2s_set_clkdiv() change the correct bits. Signed-off-by: NMatt Reimer <mreimer@vpop.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Thibault Le Meur 提交于
Audiophile-usb fix (corrects little-endianness in 16bit modes, resets interfaces at device initialization, and updates the documentation). Signed-off-by: NThibault Le Meur <Thibault.LeMeur@supelec.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
Add VIA HDA identification to use the HDA-based Motorola modem of the Clevo m540 laptop. Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Tobin Davis 提交于
This patch adds support for the MSI K9AGM2-FIH on-board audio. Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Ritesh Raj Sarraf 提交于
This patch adds Logitech QuickCam USB ID for Dell's XPS M1210 notebooks. Signed-off-by: NRitesh Raj Sarraf <rrs@researchut.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Adrian Bunk 提交于
This patch fixes the following compile error with CONFIG_SND_CS5530=y, CONFIG_ISA=n: <-- snip --> ... LD .tmp_vmlinux1 sound/built-in.o: In function 'snd_sb16_capture_trigger': sb16_main.c:(.text+0x212ad): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x212cc): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x212f7): undefined reference to 'snd_sbdsp_command' sound/built-in.o: In function 'snd_sb16_playback_trigger': sb16_main.c:(.text+0x2136d): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x2138c): undefined reference to 'snd_sbdsp_command' ... <-- snip --> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix the default pin configuration of Abit AW9D-MAX. The board has a broken BIOS that doesn't set the correct pin default configs, which screws up the auto-configuration of snd-hda-intel driver. The patch enables the override of default pin config values. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
One of the newly added model entries causes a regression on Toshiba A100. It works fine with model=auto. So, let's deselect the entry again. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 George Shapovalov 提交于
From: George Shapovalov <george@gentoo.org> Another case of ALSA ticket #3040: we need an explicit USB ID match for another Logitech camera/microphone device. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added a quirk for Roland EXR series. Reported by Andre Coetzee. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix behaviour in poor resource conditions. With this new patch, tidied with indent and with SNDRV_PCM_TRIGGER_STOP being used. Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Show the last issued command in warning messages when any communication error with CORB/RIRB occurs. Also, a bit code clean-up for composing the command value in *_send_cmd(). Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Use ARRAY_SIZE() to calculate the number of pin widgets for each codec chip. This also fixes a typo in STAC9205 code that gives a wrong number (14 instead of 12), which resulted in fatal communication errors. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
The check of a substream in snd_pcm_drain() might not be always correct since runtime can point a different substream (although the PCM state of each linked substream should be same, in theory). This patch fixes it. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added missing model entries for HD-audio codecs in the module option list. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Added the missing model option values for ALC262. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
Added HP Lucknow (ALC888) 5.1 surround support based on ALC883 6-channel threestack with changes in channel routing. Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Claudio Matsuoka 提交于
Fixed HP Nettle 6ch/8ch channel routing based on ALC883 sixstack and swapping rear and center/LFE in verbs and mixer settings. Signed-off-by: NClaudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Fix the mismatch of init verb and capture mux with VAIO STAC9872. Also, changed the item names to be more intuitive. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Kailang Yang 提交于
Fixed ALC662 auto mode, wrong NIDs were chosen. Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Kailang Yang 提交于
- Added BenQ T31-16 AMD Turion64x2 (ALC262) support - Added models for ASUS machines with ALC861 Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-