Signed-off-by: NIan Armstrong <ian@iarmst.co.uk>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add the ivtv-fb framebuffer driver for cx23415 devices (currently
only the Hauppauge PVR-350 cards). This makes it possible to use
the On-Screen Display functionality of these cards, either for menus
during MPEG playback, or as a console or X display.
Signed-off-by: NKevin Thayer <nufan_wfk@yahoo.com>
Signed-off-by: NChris Kennedy <c@groovy.org>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NJohn P Harvey <john.p.harvey@btinternet.com>
Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

add code for autodetection and firmware download to the Miglia TVMini USB
DVB-T adapter.  After firmware download, the device re-registers using
the WT220U_ZL0353_WARM usb id.
Signed-off-by: NRasmus Rohde <rohde@duff.dk>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add permissions to all the module parameters so they can be queried and set
(when possible) via sysfs.

Add description for the vidmem parameter.

Change the video_nr parameter to an array, so that the video number can be
specified when a user has more than one card.  The driver would try to give
all cards the same number otherwise, which will fail for all cards after the
first.

The default_input option would only allow values of 0 or 1, contrary to the
description.  Allow values up to the number of inputs defined for the card.

Add description of lock_norm's different behavior for 1 and >1.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NRonald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Debugging cleanups to the zr36067 driver:

* Use module_param_named() to declare the debug parameter, so we can
  use a single global variable to handle the debug level. This makes
  the driver a bit smaller (by 648 bytes on x86_64), thanks to one
  less level of indirection on every use.

* Change the debug parameter sysfs permissions, so that the debug
  level can be adjusted at runtime, as is done in many other
  media/video drivers.

* The debug level is between 0 and 5, not 0 and 4.

* Move the zr_debug export and dprintk macro definition to a header
  file so that we don't have to define them in each source file.

* Simplify a duplicate test on zr_debug.

Note that zr_debug was subsequently renamed to debug_zr36067 to avoid
possible conflicts with other Zoran device drivers, on a suggestion
by Trent Piepho.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NRonald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix a compile warning on non-32-bit machines in v4l2-int-device.h.
Add internal ioctl interface fallback function for ioctls with one
argument.
Signed-off-by: NSakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Add a driver for Toshiba TCM825x VGA camera sensor. This sensor is used
e.g. in Nokia N800 internet tablet.

This driver uses the new V4L2 internal ioctl interface.
Signed-off-by: NSakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch adds an internal ioctl-like interface which can be used in
situations where a single Video4Linux device is implemented by multiple
device drivers. One master device controls one or more slave devices.
The slaves provide Video4Linux ioctl-like interface for the use of the
master.

Only a handful of ioctls are implemented at the moment. More can (and
should) be added as more functionality is required.
Signed-off-by: NSakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Au1000: set the PCI controller IO base
  [MIPS] Alchemy: Fix USB initialization.
  [MIPS] IP32: Fix fatal typo in address computation.

The recent fix for a circular lock dependency unfortunately introduced a
potential memory leak in the event where the call to nlmsvc_lookup_host
fails for some reason.

Thanks to Roel Kluin for spotting this.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The recent mv_fill_sg() rewrite, to fix a data corruption problem
related to IOMMU virtual merging, forgot to account for the
potentially-increased size of the scatter/gather table after its run.

Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff
to more closely match the needs of mv_fill_sg().
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The PCI controller IO base was not set in the au1000 pci code.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch fixes a wrong ifdef in the board setup code, leading to the GPIO
pin not being pulled high, and thus the USB switch not being powered at all.

This finishes the rename of CONFIG_USB_OHCI to CONFIG_USB_OHCI_HCD, which
started in 2005 (before 2.6.12-rc2), then probably because things were
working anyway for most people got forgotten.

[Ralf: Paolo's original patch didn't fix the module case, Florian's patch
only fixed MTX1 etc. so this is a combined patch plus some cleanups.]

Cc: Giuseppe Patanè <giuseppe.patane@tvblob.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NGiuseppe Sacco <eppesuig@debian.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When building a custom keymap, after setting GENERATE_KEYMAP := 1 in
drivers/char/Makefile, the kernel build fails like this:

    CC      drivers/char/vt.o
  make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'.  Stop.
  make[1]: *** [drivers/char] Error 2
  make: *** [drivers] Error 2

This was caused by commit af8b1287, which
deleted a necessary colon from the Makefile rule that generates the keymap,
since that rule contains both a target and a target-pattern.  The following
patch puts the colon back:
Signed-off-by: NMaarten Bressers <mbres@gentoo.org>
Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix against access random data bytes outside the dev->chanmap array.
Thanks to Oliver Neukum for pointing me to this issue.
Signed-off-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPv6]: Fix ICMPv6 redirect handling with target multicast address
  [PKT_SCHED] cls_u32: error code isn't been propogated properly
  [ROSE]: Fix rose.ko oops on unload
  [TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKed

When IOCB_FLAG_RESFD flag is set and iocb->aio_resfd is incorrect,
statement 'goto out_put_req' is executed. At label 'out_put_req',
aio_put_req(..) is called, which requires 'req->ki_filp' set.

Signed-off-by: Yan Zheng<yanzheng@21cn.com>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

find_lock_page increases page's usage count, we should decrease it
before return VM_FAULT_SIGBUS

Signed-off-by: Yan Zheng<yanzheng@21cn.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The test for VM_CAN_NONLINEAR always fails

Signed-off-by: Yan Zheng<yanzheng@21cn.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All the current page_mkwrite() implementations also set the page dirty. Which
results in the set_page_dirty_balance() call to _not_ call balance, because the
page is already found dirty.

This allows us to dirty a _lot_ of pages without ever hitting
balance_dirty_pages().  Not good (tm).

Force a balance call if ->page_mkwrite() was successful.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the ICMPv6 Target address is multicast, Linux processes the 
redirect instead of dropping it.  The problem is in this code in 
ndisc_redirect_rcv():

         if (ipv6_addr_equal(dest, target)) {
                 on_link = 1;
         } else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) {
                 ND_PRINTK2(KERN_WARNING
                            "ICMPv6 Redirect: target address is not 
link-local.\n");
                 return;
         }

This second check will succeed if the Target address is, for example, 
FF02::1 because it has link-local scope.  Instead, it should be checking 
if it's a unicast link-local address, as stated in RFC 2461/4861 Section 
8.1:

       - The ICMP Target Address is either a link-local address (when
         redirected to a router) or the same as the ICMP Destination
         Address (when redirected to the on-link destination).

I know this doesn't explicitly say unicast link-local address, but it's 
implied.

This bug is preventing Linux kernels from achieving IPv6 Logo Phase II 
certification because of a recent error that was found in the TAHI test 
suite - Neighbor Disovery suite test 206 (v6LC.2.3.6_G) had the 
multicast address in the Destination field instead of Target field, so 
we were passing the test.  This won't be the case anymore.

The patch below fixes this problem, and also fixes ndisc_send_redirect() 
to not send an invalid redirect with a multicast address in the Target 
field.  I re-ran the TAHI Neighbor Discovery section to make sure Linux 
passes all 245 tests now.
Signed-off-by: NBrian Haley <brian.haley@hp.com>
Acked-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit a3d38402 aka
"[AX.25]: Fix unchecked rose_add_loopback_neigh uses"
transformed rose_loopback_neigh var into statically allocated one.
However, on unload it will be kfree's which can't work.

Steps to reproduce:

	modprobe rose
	rmmod rose

BUG: unable to handle kernel NULL pointer dereference at virtual address 00000008
 printing eip:
c014c664
*pde = 00000000
Oops: 0000 [#1]
PREEMPT DEBUG_PAGEALLOC
Modules linked in: rose ax25 fan ufs loop usbhid rtc snd_intel8x0 snd_ac97_codec ehci_hcd ac97_bus uhci_hcd thermal usbcore button processor evdev sr_mod cdrom
CPU:    0
EIP:    0060:[<c014c664>]    Not tainted VLI
EFLAGS: 00210086   (2.6.23-rc9 #3)
EIP is at kfree+0x48/0xa1
eax: 00000556   ebx: c1734aa0   ecx: f6a5e000   edx: f7082000
esi: 00000000   edi: f9a55d20   ebp: 00200287   esp: f6a5ef28
ds: 007b   es: 007b   fs: 0000  gs: 0033  ss: 0068
Process rmmod (pid: 1823, ti=f6a5e000 task=f7082000 task.ti=f6a5e000)
Stack: f9a55d20 f9a5200c 00000000 00000000 00000000 f6a5e000 f9a5200c f9a55a00 
       00000000 bf818cf0 f9a51f3f f9a55a00 00000000 c0132c60 65736f72 00000000 
       f69f9630 f69f9528 c014244a f6a4e900 00200246 f7082000 c01025e6 00000000 
Call Trace:
 [<f9a5200c>] rose_rt_free+0x1d/0x49 [rose]
 [<f9a5200c>] rose_rt_free+0x1d/0x49 [rose]
 [<f9a51f3f>] rose_exit+0x4c/0xd5 [rose]
 [<c0132c60>] sys_delete_module+0x15e/0x186
 [<c014244a>] remove_vma+0x40/0x45
 [<c01025e6>] sysenter_past_esp+0x8f/0x99
 [<c012bacf>] trace_hardirqs_on+0x118/0x13b
 [<c01025b6>] sysenter_past_esp+0x5f/0x99
 =======================
Code: 05 03 1d 80 db 5b c0 8b 03 25 00 40 02 00 3d 00 40 02 00 75 03 8b 5b 0c 8b 73 10 8b 44 24 18 89 44 24 04 9c 5d fa e8 77 df fd ff <8b> 56 08 89 f8 e8 84 f4 fd ff e8 bd 32 06 00 3b 5c 86 60 75 0f 
EIP: [<c014c664>] kfree+0x48/0xa1 SS:ESP 0068:f6a5ef28
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When only GSO skb was partially ACKed, no hints are reset,
therefore fastpath_cnt_hint must be tweaked too or else it can
corrupt fackets_out. The corruption to occur, one must have
non-trivial ACK/SACK sequence, so this bug is not very often
that harmful. There's a fackets_out state reset in TCP because
fackets_out is known to be inaccurate and that fixes the issue
eventually anyway.

In case there was also at least one skb that got fully ACKed,
the fastpath_skb_hint is set to NULL which causes a recount for
fastpath_cnt_hint (the old value won't be accessed anymore),
thus it can safely be decremented without additional checking.

Reported by Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should only reparent to a class former class devices that
form the base of class hierarchy. Nested devices should still
grow from their real parents.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Tested-by: NAndrey Borzenkov <arvidjaar@mail.ru>
Tested-by: NAnssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: point to migration document

Add the manufacturer and card id of teltonica pcmcia modems to serial_cs.c
Signed-off-by: NAttila Kinali <attila@kinali.ch>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Document sequence of keypresses that actually works. Yes, this changed
year-or-so ago.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Async signals should not be reported as sent by current in audit log.  As
it is, we call audit_signal_info() too early in check_kill_permission().
Note that check_kill_permission() has that test already - it needs to know
if it should apply current-based permission checks.  So the solution is to
move the call of audit_signal_info() between those.

Bogosity in question is easily reproduced - add a rule watching for e.g.
kill(2) from specific process (so that audit_signal_info() would not
short-circuit to nothing), say load_policy, watch the bogus OBJ_PID entry
in audit logs claiming that write(2) on selinuxfs file issued by
load_policy(8) had somehow managed to send a signal to syslogd...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NSteve Grubb <sgrubb@redhat.com>
Acked-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Modulat lguest started giving linking errors

MODPOST 1 modules
ERROR: "kasprintf" [drivers/lguest/lg.ko] undefined!
Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide some documentation for CONFIG_LOCK_STAT.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

VIA C3 Ezra-T has RevisionID equal to 1, but it needs RevisionKey to be 0
or CPU will ignore new frequency and will continue to work at old
frequency.  New "revid_errata" option will force RevisionKey to be set to
0, whatever RevisionID is.

Additionaly "Longhaul" will not silently ignore unsuccessful transition.
It will try to check if "revid_errata" or "disable_acpi_c3" options need to
be enabled for this processor/system.

Same for Longhaul ver.  2 support.  It will be disabled if none of above
options will work.

 Best case scenario (with patch apllied and v2 enabled):
 longhaul: VIA C3 'Ezra' [C5C] CPU detected.  Longhaul v2 supported.
 longhaul: Using northbridge support.
 longhaul: VRM 8.5
 longhaul: Max VID=1.350  Min VID=1.050, 13 possible voltage scales
 longhaul: f: 300000 kHz, index: 0, vid: 1050 mV
 [...]
 longhaul: Voltage scaling enabled.
 Worst case scenario:
 longhaul: VIA C3 'Ezra-T' [C5M] CPU detected.  Powersaver supported.
 longhaul: Using northbridge support.
 longhaul: Using ACPI support.
 longhaul: VRM 8.5
 longhaul: Claims to support voltage scaling but min & max are both 1.250. Voltage scaling disabled
 longhaul: Failed to set requested frequency!
 longhaul: Enabling "Ignore Revision ID" option.
 longhaul: Failed to set requested frequency!
 longhaul: Disabling ACPI C3 support.
 longhaul: Disabling "Ignore Revision ID" option.
 longhaul: Failed to set requested frequency!
 longhaul: Enabling "Ignore Revision ID" option.

[akpm@linux-foundation.org: coding-style cleanups]
Signed-off-by: NRafal Bilski <rafalbilski@interia.pl>
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When using /proc/timer_stats on ppc64 I noticed the events/sec field wasnt
accurate.  Sometimes the integer part was incorrect due to rounding (we
werent taking the fractional seconds into consideration).

The fraction part is also wrong, we need to pad the printf statement and
take the bottom three digits of 1000 times the value.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It turns out that there are a few other five-second timers in the
kernel, and if the timers get in sync, the load-average can get
artificially inflated by events that just happen to coincide.

So just offset the load average calculation it by a timer tick.

Noticed by Anders Boström, for whom the coincidence started triggering
on one of his machines with the JBD jiffies rounding code (JBD is one of
the subsystems that also end up using a 5-second timer by default).
Tested-by: NAnders Boström <anders@bostrom.dyndns.org>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>