- 17 10月, 2017 17 次提交
-
-
由 Damien Le Moal 提交于
Move standard macro definitions for the zone types and zone conditions to scsi_proto.h together with the definitions related to the REPORT ZONES command. While at it, define all values in the enums to be clear. Also remove unnecessary includes in sd_zbc.c. No functional change is introduced by this patch. Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com> Reviewed-by: NBart Van Assche <Bart.VanAssche@wdc.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Christoph Hellwig 提交于
Always use bsg_job->reply instead of scsi_req(bsg_job->req)->sense), as they always point to the same memory. Never set scsi_req(bsg_job->req)->result and we'll set that value through bsg_job_done. [mkp: applied by hand, fixed whitespace] Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Tested-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Christoph Hellwig 提交于
As a user of bsg-lib the SAS transport should not poke into request internals but use the bsg_job fields instead. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Christoph Hellwig 提交于
bsg_job_done takes care of updating the scsi_request structure fields. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Christoph Hellwig 提交于
We already support 256 or more segments as long as the architecture supports SG chaining (all the ones that matter do), so removed the weird playing with limits from the job handler. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Christos Gkekas 提交于
Remove redundant variables in quedi_fw.c that are set but not used. Signed-off-by: NChristos Gkekas <chris.gekas@gmail.com> Acked-by: NManish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Giridhar Malavali 提交于
Based on the FC4 type, login will proceed to either FCP or FC-NVMe remote ports. Signed-off-by: NGiridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Himanshu Madhani 提交于
In some environments, user can choose to not enable SCSI-MQ but wants to use FC-NVMe feature of the driver. Since driver relies on Q-Pairs to allocate FC-NVMe resources, use existing module parameter to create Q-Pairs when FC-NVMe is enabled. Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: NEwan D. Milne <emilne@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Himanshu Madhani 提交于
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Duane Grigsby 提交于
If we discovered a topology that is N2N then we will issue a login to the target. If our WWPN is bigger than the target's WWPN then we will initiate login, otherwise we will just wait for the target to initiate login. [mkp: many whitespace errors] Signed-off-by: NDuane Grigsby <duane.grigsby@cavium.com> Signed-off-by: NMichael Hernandez <michael.hernandez@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Tested-by: NEwan D. Milne <emilne@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Duane Grigsby 提交于
The MBC_GET_PORT_DATABASE command normally checks the port state information. This patch allows it to save that info in the fcport structure and ignore the check if the query flag is set. [mkp: typo] Signed-off-by: NDuane Grigsby <duane.grigsby@cavium.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Himanshu Madhani 提交于
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Himanshu Madhani 提交于
[mkp: fixed whitespace] Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Dan Carpenter 提交于
The ! has higher precedence than the & operation. I've added parenthesis so this works as intended. Fixes: 952c303b ("scsi: lpfc: Ensure io aborts interlocked with the target.") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Colin Ian King 提交于
Functions ahc_devlimited_syncrate and ahc_linux_initialize_scsi_bus are declared static in their prototypes but are missing in their definitions, so add the missing static. Cleans up sparse warnings: symbol 'ahc_devlimited_syncrate' was not declared. Should it be static? symbol 'ahc_linux_initialize_scsi_bus' was not declared. Should it be static? Signed-off-by: NColin Ian King <colin.king@canonical.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Arnd Bergmann 提交于
gcc-8 points out a logic error that has existed since the start of the git history: drivers/scsi/nsp32.c: In function 'nsp32_selection_autoscsi': drivers/scsi/nsp32.c:607:27: error: bitwise comparison always evaluates to false [-Werror=tautological-compare] if(((phase & BUSMON_BSY) == 1) || (phase & BUSMON_SEL) == 1) { ^~ Presumably the author intended to check if one of two bits was set, so that's what I'm changing the code to. This will obviously change the behavior of the code, hopefully to do the right thing, but I have not tested this or checked if the new "(phase & BUSMON_BSY) || (phase & BUSMON_SEL)" condition should indeed be treated as a fatal error. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NGOTO Masanori <gotom@debian.or.jp> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Dan Carpenter 提交于
We could allocate less memory than intended because we do: bfad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. I fixed the network version of this in March with commit 13e2d518 ("bna: integer overflow bug in debugfs"). Fixes: ab2a9ba1 ("[SCSI] bfa: add debugfs support") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 12 10月, 2017 23 次提交
-
-
由 Varun Prakash 提交于
In case of mgmt cmds, task->hdr is dereferenced after transmitting the pdu in iscsi_tcp_task_xmit(). To handle this case current code increments the Tx skb reference count and frees the skb in cxgbi_cleanup_task(). In some error cases this results in skb leak. To fix this in case of mgmt cmds, allocate a separate buffer for iSCSI hdr and free this buffer in cxgbi_cleanup_task(). Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Varun Prakash 提交于
In case of connection reset Tx skb queue can have some skbs which are not transmitted so purge Tx skb queue in release_offload_resources() to avoid skb leak. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Varun Prakash 提交于
In case of vlan pass 0 as ifindex to find route instead of passing real_dev ifindex, if we pass real_dev ifindex then ip_route_output_ports() and ip6_route_output() will check for route through real_dev not through vlan interface. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Randy Dunlap 提交于
Update the description of 'scsi_logging_level' from 8 4-bit nibbles to the (pre-git) reality of 10 3-bit bitfields. Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Reviewed-by: NKyle Fortin <kyle.fortin@oracle.com> Reviewed-by: NSteffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Randy Dunlap 提交于
Fix typo: I20 should be I2O. Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Version 11.4.0.1 Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
The patch fixes errors reported by tools like smatch: - removes unused structure fields - removes dead code - fixes code identation Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Provide driver version in host data to FW. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
Add version 1 of GET_HBA_NAME to fetch port specific IQN first. If it fails use version 0 to get the IQN. To use this old IQN names of interfaces needs to be cleared from the iscsiadm database. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
be_cmd_get_initname pulls GET_HBA_NAME response of 276 bytes in embedded WRB buffer of 236 bytes. Use non-embedded functions to issue the IOCTL. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
beiscsi_modify_eq_delay is using embedded command to send request of 788 bytes in 236 bytes buffer. Non-embedded command needs to be used in such cases. Use mgmt_alloc_cmd_data fn modified to allow passing of subsystem. Use mgmt_exec_nonemb_cmd fn modified to allow setting of callback. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
In beiscsi_dev_probe, allocated msi_name does not get freed and enabled HW interrupts are not disabled in iscsi_host_add error case. Add beiscsi_free_irqs fn to handle the cleanup in probe and disable port. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
mgmt_open_connection is expected to return tag not errno. In error case, just return invalid tag 0. Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Jitendra Bhivare 提交于
The boot flags exported through sysfs was wrongly reverted to 2. Use boot flag 3 required per spec. Bit 0 Block valid flag Bit 1 Firmware booting selected Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sreekanth Reddy 提交于
Bump mpt3sas driver version to v16.100.00.00 Signed-off-by: NSreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sreekanth Reddy 提交于
Adding PNP ID of Mercator i.e. SAS3616 HBA device. Its device ID is 0xD1 and vendor ID is 0x1000. Signed-off-by: NSreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sreekanth Reddy 提交于
Enclosure handles are not updated after host reset. As a result, driver device structure is holding previously assigned enclosure handle which is different from the enclosure handle populated in the corresponding device page. Modified the driver to update devices enclosure handles after host reset to current value by referring the enclosure handles from corresponding device pages Signed-off-by: NSreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sreekanth Reddy 提交于
Display chassis slot information along with other drive location parameters such as slot number and connector name in the logs if chassis slot validity bit is set in 'SAS Enclosure Page 0'. Signed-off-by: NSreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sreekanth Reddy 提交于
Updated MPI headers to v2.00.48 Signed-off-by: NSreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sreekanth Reddy 提交于
scsi: mpt3sas: Fix IO error occurs on pulling out a drive from RAID1 volume created on two SATA drive Whenever an I/O for a RAID volume fails with IOCStatus MPI2_IOCSTATUS_SCSI_IOC_TERMINATED and SCSIStatus equal to (MPI2_SCSI_STATE_TERMINATED | MPI2_SCSI_STATE_NO_SCSI_STATUS) then return the I/O to SCSI midlayer with "DID_RESET" (i.e. retry the IO infinite times) set in the host byte. Previously, the driver was completing the I/O with "DID_SOFT_ERROR" which causes the I/O to be quickly retried. However, firmware needed more time and hence I/Os were failing. Signed-off-by: NSreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sreekanth Reddy 提交于
For Dev Handles whose value is less than HBA's phys count number, driver would return HBA's SAS address value. As a result, for a Virtual SES device the driver was returning the HBA's SAS address. Updated the driver to return Virtual SES' SAS address. [mkp: clarified commit message] Signed-off-by: NSreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Sreekanth Reddy 提交于
To reduce the memory footprint of the driver in the kdump kernel, we apply the following settings when reset_devices is set: 1. Use single MSI-x vector. 2. Disable RDPQ mode. 3. Set sg_table_size to 32 by default. 4) Set SCSI IO Queue depth to 200. [mkp: fixed commit message] Signed-off-by: NSreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: NTomas Henzl <thenzl@redhat.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-