So select the NVME_CORE symbol instead of depending on BLK_DEV_NVME.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Without this we'll get a use after free after connecting two controller
using the same hostnqn and then disconnecting one of them.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

NVM Express 1.2.1 section 7.9, NVMe Qualified Names, specifies that the
UUID format of NQN uses a UUID based on RFC 4122.

RFC 4122 specifies that the UUID is encoded in big-endian byte order.

Switch the NVMe over Fabrics host ID field from little-endian UUID to
big-endian UUID to match the specification.
Signed-off-by: NDaniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: NJay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Signed-off-by: NJay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Per NVMe-over-Fabrics 1.0 spec, sqsize is represented as
a 0-based value.

Also per spec, the RDMA binding values shall be set
to sqsize, which makes hsqsize 0-based values.

Thus, the sqsize during NVMf connect() is now:

[root@fedora23-fabrics-host1 for-48]# dmesg
[  318.720645] nvme_fabrics: nvmf_connect_admin_queue(): sqsize for
admin queue: 31
[  318.720884] nvme nvme0: creating 16 I/O queues.
[  318.810114] nvme_fabrics: nvmf_connect_io_queue(): sqsize for i/o
queue: 127

Finally, current interpretation implies hrqsize is 1's based
so set it appropriately.
Reported-by: NDaniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: NJay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Upon admin queue connect(), the rdma qp was being
set based on NVMF_AQ_DEPTH.  However, the fabrics layer was
using the sqsize field value set for I/O queues for the admin
queue, which threw the nvme layer and rdma layer off-whack:

root@fedora23-fabrics-host1 nvmf]# dmesg
[ 3507.798642] nvme_fabrics: nvmf_connect_admin_queue():admin sqsize
being sent is: 128
[ 3507.798858] nvme nvme0: creating 16 I/O queues.
[ 3507.896407] nvme nvme0: new ctrl: NQN "nullside-nqn", addr
192.168.1.3:4420

Thus, to have a different admin queue value, we use
NVMF_AQ_DEPTH for connect() and RDMA private data
as the minimum depth specified in the NVMe-over-Fabrics 1.0 spec
(and in that RDMA private data we treat hrqsize as 1's-based
value, per current understanding of the fabrics spec).
Reported-by: NDaniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: NJay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: NDaniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

The host will be sending sqsize 0-based hsqsize value,
the target need to be adjusted as well.
Signed-off-by: NJay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Avoid dereferencing the queue pointer in nvmet_rdma_release_queue_work()
after it has been freed by nvmet_rdma_free_queue().

Fixes: d8f7750a ("nvmet-rdma: Correctly handle RDMA device hot removal")
Signed-off-by: NVincent Stehlé <vincent.stehle@intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

ret is not initialized so it contains garbage.  Ensure garbage
is not returned by initializing rc to 0.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>

When we reset or reconnect to a controller, we are cancelling the
async event handler so we can safely re-establish resources, but we
need to remember to start it again when we successfully reconnect.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

The host is allowed to issue identify as many times
as it wants, we need to stay consistent when reporting
the serial number for a given controller.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Under extreme conditions this might cause data corruptions. By doing that
we we repost the buffer and then post this buffer for the device to send.
If we happen to use shared receive queues the device might write to the
buffer before it sends it (there is no ordering between send and recv
queues). Without SRQs we probably won't get that if the host doesn't
mis-behave and send more than we allowed it, but relying on that is not
really a good idea.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

When configuring a device attached listener, we may
see device removal events. In this case we return a
non-zero return code from the cm event handler which
implicitly destroys the cm_id. It is possible that in
the future the user will remove this listener and by
that trigger a second call to rdma_destroy_id on an
already destroyed cm_id -> BUG.

In addition, when a queue bound (active session) cm_id
generates a DEVICE_REMOVAL event we must guarantee all
resources are cleaned up by the time we return from the
event handler.

Introduce nvmet_rdma_device_removal which addresses
(or at least attempts to) both scenarios.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Relying on ctrl state in nvme_rdma_shutdown_ctrl is wrong because
it will never be NVME_CTRL_LIVE (delete_ctrl or reset_ctrl invoked it).

Instead, check that the admin queue is connected. Note that it is safe
because we can never see a copmeting thread trying to destroy the admin
queue (reset or delete controller).
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

nvme_uninit_ctrl already does that for us. Note that we
reordered nvme_loop_shutdown_ctrl with nvme_uninit_ctrl
but its safe because we want controller uninit to happen
before we shutdown the transport resources.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

If we wait until we free the controller (free_ctrl) we might
lose our rdma device without any notification while we still
have open resources (tags mrs and dma mappings).

Instead, destroy the tags with their rdma resources once we
delete the device and not when freeing it.

Note that we don't do that in nvme_rdma_shutdown_ctrl because
controller reset uses it as well and we want to give active I/O
a chance to complete successfully.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

nvme_uninit_ctrl already does that for us. Note that we reordered
nvme_rdma_shutdown_ctrl and nvme_uninit_ctrl, this is perfectly
fine because we actually want ctrl uninit (aen, scan cancellation
and namespaces removal) to happen before we shutdown the rdma
resources.

Also, centralize the deletion work and the dead controller removal
work code duplication into __nvme_rdma_shutdown_ctrl that accepts
a shutdown boolean.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Device removal sequence may have crashed because the
controller (and admin queue space) was freed before
we destroyed the admin queue resources. Thus we
want to destroy the admin queue and only then queue
controller deletion and wait for it to complete.

More specifically we:
1. own the controller deletion (make sure we are not
   competing with another deletion).
2. get rid of inflight reconnects if exists (which
   also destroy and create queues).
3. destroy the queue.
4. safely queue controller deletion (and wait for it
   to complete).
Reported-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

On an ordered target shutdown, the target can send a AEN on a namespace
removal, this will trigger the host to queue ns-list query. The shutdown
will trigger error recovery which will attepmt periodic reconnect.

We can hit a race where the ns rescanning fails (error recovery kicked
in and we're not connected) causing removing all the namespaces and when
we reconnect we won't see any namespaces for this controller.

So, queue a namespace rescan after we successfully reconnected to the target.
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Zero out the full nvme_rdma_cm_req structure before sending it.
Otherwise we end up leaking kernel memory in the reserved field, which
might break forward compatibility in the future.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - A couple of changes to improve the support for erase/discard/trim cmds
   - Add eMMC HS400 enhanced strobe support
   - Show OCR and DSR registers in SYSFS for MMC/SD cards
   - Correct and improve busy detection logic for MMC switch (CMD6) cmds
   - Disable HPI cmds for certain broken Hynix eMMC cards
   - Allow MMC hosts to specify non-support for SD and MMC cmds
   - Some minor additional fixes

  MMC host:
   - sdhci: Re-works, fixes and clean-ups
   - sdhci: Add HW auto re-tuning support
   - sdhci: Re-factor code to prepare for adding support for eMMC CMDQ
   - sdhci-esdhc-imx: Fixes and clean-ups
   - sdhci-esdhc-imx: Update system PM support
   - sdhci-esdhc-imx: Enable HW auto re-tuning
   - sdhci-bcm2835: Remove driver as sdhci-iproc is used instead
   - sdhci-brcmstb: Add new driver for Broadcom BRCMSTB SoCs
   - sdhci-msm: Add support for UHS cards
   - sdhci-tegra: Improve support for UHS cards
   - sdhci-of-arasan: Update phy support for Rockchip SoCs
   - sdhci-of-arasan: Deploy enhanced strobe support
   - dw_mmc: Some fixes and clean-ups
   - dw_mmc: Enable support for erase/discard/trim cmds
   - dw_mmc: Enable CMD23 support
   - mediatek: Some fixes related to the eMMC HS400 support
   - sh_mmcif: Improve support for HW busy detection
   - rtsx_pci: Enable support for erase/discard/trim cmds"

* tag 'mmc-v4.8' of git://git.linaro.org/people/ulf.hansson/mmc: (135 commits)
  mmc: rtsx_pci: Remove deprecated create_singlethread_workqueue
  mmc: rtsx_pci: Enable MMC_CAP_ERASE to allow erase/discard/trim requests
  mmc: rtsx_pci: Use the provided busy timeout from the mmc core
  mmc: sdhci-pltfm: Drop define for SDHCI_PLTFM_PMOPS
  mmc: sdhci-pltfm: Convert to use the SET_SYSTEM_SLEEP_PM_OPS
  mmc: sdhci-pltfm: Make sdhci_pltfm_suspend|resume() static
  mmc: sdhci-esdhc-imx: Use common sdhci_suspend|resume_host()
  mmc: sdhci-esdhc-imx: Assign system PM ops within #ifdef CONFIG_PM_SLEEP
  mmc: sdhci-sirf: Remove non needed #ifdef CONFIG_PM* for dev_pm_ops
  mmc: sdhci-s3c: Remove non needed #ifdef CONFIG_PM for dev_pm_ops
  mmc: sdhci-pxav3: Remove non needed #ifdef CONFIG_PM for dev_pm_ops
  mmc: sdhci-of-esdhc: Simplify code by using SIMPLE_DEV_PM_OPS
  mmc: sdhci-acpi: Simplify code by using SET_SYSTEM_SLEEP_PM_OPS
  mmc: sdhci-pci-core: Simplify code by using SET_SYSTEM_SLEEP_PM_OPS
  mmc: Change the max discard sectors and erase response when HW busy detect
  phy: rockchip-emmc: Wait even longer for the DLL to lock
  phy: rockchip-emmc: Be tolerant to card clock of 0 in power on
  mmc: sdhci-of-arasan: Revert: Always power the PHY off/on when clock changes
  mmc: sdhci-msm: Add support for UHS cards
  mmc: sdhci-msm: Add set_uhs_signaling() implementation
  ...

Pull watchdog updates from Wim Van Sebroeck:
 "Core:
   - min and max timeout improvements, WDOG_HW_RUNNING improvements,
     status funtionality
   - Add a device managed API for watchdog_register_device()

  New watchdog drivers:
   -  Aspeed SoCs
   -  Maxim PMIC MAX77620
   -  Amlogic Meson GXBB SoC

  Enhancements:
   - support for the r8a7796 watchdog device
   - support for F81866 watchdog device
   - support for 5th variation of Apollo Lake
   - support for MCP78S chipset
   - clean-up of softdog.c watchdog device driver
   - pic32-wdt and pic32-dmt fixes
   - Documentation/watchdog: watchdog-test improvements
   - several other fixes and improvements"

* git://www.linux-watchdog.org/linux-watchdog: (50 commits)
  watchdog: gpio_wdt: Fix missing platform_set_drvdata() in gpio_wdt_probe()
  watchdog: core: Clear WDOG_HW_RUNNING before calling the stop function
  watchdog: core: Fix error handling of watchdog_dev_init()
  watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe()
  watchdog: pic32-dmt: Remove .owner field for driver
  watchdog: pic32-wdt: Remove .owner field for driver
  watchdog: renesas-wdt: Add support for the r8a7796 wdt
  Documentation/watchdog: check return value for magic close
  watchdog: sbsa: Drop status function
  watchdog: Implement status function in watchdog core
  watchdog: tangox: Set max_hw_heartbeat_ms instead of max_timeout
  watchdog: change watchdog_need_worker logic
  watchdog: add support for MCP78S chipset in nv_tco
  watchdog: bcm2835_wdt: remove redundant ->set_timeout callback
  watchdog: bcm2835_wdt: constify _ops and _info structures
  dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
  watchdog: Add Meson GXBB Watchdog Driver
  watchdog: qcom: configure BARK time in addition to BITE time
  watchdog: qcom: add option for standalone watchdog not in timer block
  watchdog: qcom: update device tree bindings
  ...

Pull btrfs updates from Chris Mason:
 "This pull is dedicated to Josef's enospc rework, which we've been
  testing for a few releases now.  It fixes some early enospc problems
  and is dramatically faster.

  This also includes an updated fix for the delalloc accounting that
  happens after a fault in copy_from_user.  My patch in v4.7 was almost
  but not quite enough"

* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix delalloc accounting after copy_from_user faults
  Btrfs: avoid deadlocks during reservations in btrfs_truncate_block
  Btrfs: use FLUSH_LIMIT for relocation in reserve_metadata_bytes
  Btrfs: fill relocation block rsv after allocation
  Btrfs: always use trans->block_rsv for orphans
  Btrfs: change how we calculate the global block rsv
  Btrfs: use root when checking need_async_flush
  Btrfs: don't bother kicking async if there's nothing to reclaim
  Btrfs: fix release reserved extents trace points
  Btrfs: add fsid to some tracepoints
  Btrfs: add tracepoints for flush events
  Btrfs: fix delalloc reservation amount tracepoint
  Btrfs: trace pinned extents
  Btrfs: introduce ticketed enospc infrastructure
  Btrfs: add tracepoint for adding block groups
  Btrfs: warn_on for unaccounted spaces
  Btrfs: change delayed reservation fallback behavior
  Btrfs: always reserve metadata for delalloc extents
  Btrfs: fix callers of btrfs_block_rsv_migrate
  Btrfs: add bytes_readonly to the spaceinfo at once

Pull sound updates from Takashi Iwai:
 "The majority of this update is about ASoC, including a few new
  drivers, and the rest are mostly minor changes.  The only substantial
  change in ALSA core is about the additional error handling in the
  compress-offload API.  Below are highlights:

   - Add the error propagating support in compress-offload API

   - HD-audio: a usual Dell headset fixup, an Intel HDMI/DP fix, and the
     default mixer setup change ot turn off the loopback

   - Lots of updates for ASoC Intel drivers, mostly board support and
     bug fixing, and to the NAU8825 driver

   - Work on generalizing bits of simple-card to allow more code sharing
     with the Renesas rsrc-card (which can't use simple-card due to DPCM)

   - Removal of the Odroid X2 driver due to replacement with simple-card

   - Support for several new Mediatek platforms and associated boards

   - New ASoC drivers for Allwinner A10, Analog Devices ADAU7002,
     Broadcom Cygnus, Cirrus Logic CS35L33 and CS53L30, Maxim MAX8960
     and MAX98504, Realtek RT5514 and Wolfson WM8758"

* tag 'sound-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (278 commits)
  sound: oss: Use kernel_read_file_from_path() for mod_firmware_load()
  ASoC: Intel: Skylake: Delete an unnecessary check before the function call "release_firmware"
  ASoC: Intel: Skylake: Fix NULL Pointer exception in dynamic_debug.
  ASoC: samsung: Specify DMA channels through struct snd_dmaengine_pcm_config
  ASoC: samsung: Fix error paths in the I2S driver's probe()
  ASoC: cs53l30: Fix bit shift issue of TDM mode
  ASoC: cs53l30: Fix a bug for TDM slot location validation
  ASoC: rockchip: correct the spdif clk
  ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members
  ASoC: rsrc-card: use asoc_simple_card_parse_card_name()
  ASoC: rsrc-card: use asoc_simple_dai instead of rsrc_card_dai
  ASoC: rsrc-card: use asoc_simple_card_parse_dailink_name()
  ASoC: simple-card: use asoc_simple_card_parse_card_name()
  ASoC: simple-card-utils: add asoc_simple_card_parse_card_name()
  ASoC: simple-card: use asoc_simple_card_parse_dailink_name()
  ASoC: simple-card-utils: add asoc_simple_card_set_dailink_name()
  ASoC: nau8825: drop redundant idiom when converting integer to boolean
  ASoC: nau8825: jack connection decision with different insertion logic
  ASoC: mediatek: Add HDMI dai-links to the mt8173-rt5650 machine driver
  ASoC: mediatek: mt2701: fix non static symbol warning
  ...

Pull powerpc updates from Michael Ellerman:
 "Highlights:
   - PowerNV PCI hotplug support.
   - Lots more Power9 support.
   - eBPF JIT support on ppc64le.
   - Lots of cxl updates.
   - Boot code consolidation.

  Bug fixes:
   - Fix spin_unlock_wait() from Boqun Feng
   - Fix stack pointer corruption in __tm_recheckpoint() from Michael
     Neuling
   - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
   - mm: Ensure "special" zones are empty from Oliver O'Halloran
   - ftrace: Separate the heuristics for checking call sites from
     Michael Ellerman
   - modules: Never restore r2 for a mprofile-kernel style mcount() call
     from Michael Ellerman
   - Fix endianness when reading TCEs from Alexey Kardashevskiy
   - start rtasd before PCI probing from Greg Kurz
   - PCI: rpaphp: Fix slot registration for multiple slots under a PHB
     from Tyrel Datwyler
   - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev
     Bhattiprolu

  Cleanups & fixes:
   - Drop support for MPIC in pseries from Rashmica Gupta
   - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
   - Remove unused symbols in asm-offsets.c from Rashmica Gupta
   - Fix SRIOV not building without EEH enabled from Russell Currey
   - Remove kretprobe_trampoline_holder from Thiago Jung Bauermann
   - Reduce log level of PCI I/O space warning from Benjamin
     Herrenschmidt
   - Add array bounds checking to crash_shutdown_handlers from Suraj
     Jitindar Singh
   - Avoid -maltivec when using clang integrated assembler from Anton
     Blanchard
   - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
   - Fix error return value in cmm_mem_going_offline() from Rasmus
     Villemoes
   - export cpu_to_core_id() from Mauricio Faria de Oliveira
   - Remove old symbols from defconfigs from Andrew Donnellan
   - Update obsolete comments in setup_32.c about entry conditions from
     Benjamin Herrenschmidt
   - Add comment explaining the purpose of setup_kdump_trampoline() from
     Benjamin Herrenschmidt
   - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin
     Hao
   - Remove RELOCATABLE_PPC32 from Kevin Hao
   - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh

  Minor cleanups & fixes:
   - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
     Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King,
     Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman,
     Michael Ellerman, Stephen Rothwell, Stewart Smith.

  Freescale updates from Scott:
   - "Highlights include more 8xx optimizations, device tree updates,
     and MVME7100 support."

  PowerNV PCI hotplug from Gavin Shan:
   - PCI: Add pcibios_setup_bridge()
   - Override pcibios_setup_bridge()
   - Remove PCI_RESET_DELAY_US
   - Move pnv_pci_ioda_setup_opal_tce_kill() around
   - Increase PE# capacity
   - Allocate PE# in reverse order
   - Create PEs in pcibios_setup_bridge()
   - Setup PE for root bus
   - Extend PCI bridge resources
   - Make pnv_ioda_deconfigure_pe() visible
   - Dynamically release PE
   - Update bridge windows on PCI plug
   - Delay populating pdn
   - Support PCI slot ID
   - Use PCI slot reset infrastructure
   - Introduce pnv_pci_get_slot_id()
   - Functions to get/set PCI slot state
   - PCI/hotplug: PowerPC PowerNV PCI hotplug driver
   - Print correct PHB type names

  Power9 idle support from Shreyas B. Prabhu:
   - set power_save func after the idle states are initialized
   - Use PNV_THREAD_WINKLE macro while requesting for winkle
   - make hypervisor state restore a function
   - Rename idle_power7.S to idle_book3s.S
   - Rename reusable idle functions to hardware agnostic names
   - Make pnv_powersave_common more generic
   - abstraction for saving SPRs before entering deep idle states
   - Add platform support for stop instruction
   - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
   - cpuidle/powernv: cleanup cpuidle-powernv.c
   - cpuidle/powernv: Add support for POWER ISA v3 idle states
   - Use deepest stop state when cpu is offlined

  Power9 PMU from Madhavan Srinivasan:
   - factor out power8 pmu macros and defines
   - factor out power8 pmu functions
   - factor out power8 __init_pmu code
   - Add power9 event list macros for generic and cache events
   - Power9 PMU support
   - Export Power9 generic and cache events to sysfs

  Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
   - Add XICS emulation APIs
   - Move a few exception common handlers to make room
   - Add support for HV virtualization interrupts
   - Add mechanism to force a replay of interrupts
   - Add ICP OPAL backend
   - Discover IODA3 PHBs
   - pci: Remove obsolete SW invalidate
   - opal: Add real mode call wrappers
   - Rename TCE invalidation calls
   - Remove SWINV constants and obsolete TCE code
   - Rework accessing the TCE invalidate register
   - Fallback to OPAL for TCE invalidations
   - Use the device-tree to get available range of M64's
   - Check status of a PHB before using it
   - pci: Don't try to allocate resources that will be reassigned

  Other Power9:
   - Send SIGBUS on unaligned copy and paste from Chris Smart
   - Large Decrementer support from Oliver O'Halloran
   - Load Monitor Register Support from Jack Miller

  Performance improvements from Anton Blanchard:
   - Avoid load hit store in __giveup_fpu() and __giveup_altivec()
   - Avoid load hit store in setup_sigcontext()
   - Remove assembly versions of strcpy, strcat, strlen and strcmp
   - Align hot loops of some string functions

  eBPF JIT from Naveen N. Rao:
   - Fix/enhance 32-bit Load Immediate implementation
   - Optimize 64-bit Immediate loads
   - Introduce rotate immediate instructions
   - A few cleanups
   - Isolate classic BPF JIT specifics into a separate header
   - Implement JIT compiler for extended BPF

  Operator Panel driver from Suraj Jitindar Singh:
   - devicetree/bindings: Add binding for operator panel on FSP machines
   - Add inline function to get rc from an ASYNC_COMP opal_msg
   - Add driver for operator panel on FSP machines

  Sparse fixes from Daniel Axtens:
   - make some things static
   - Introduce asm-prototypes.h
   - Include headers containing prototypes
   - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
   - kvm: Clarify __user annotations
   - Pass endianness to sparse
   - Make ppc_md.{halt, restart} __noreturn

  MM fixes & cleanups from Aneesh Kumar K.V:
   - radix: Update LPCR HR bit as per ISA
   - use _raw variant of page table accessors
   - Compile out radix related functions if RADIX_MMU is disabled
   - Clear top 16 bits of va only on older cpus
   - Print formation regarding the the MMU mode
   - hash: Update SDR1 size encoding as documented in ISA 3.0
   - radix: Update PID switch sequence
   - radix: Update machine call back to support new HCALL.
   - radix: Add LPID based tlb flush helpers
   - radix: Add a kernel command line to disable radix
   - Cleanup LPCR defines

  Boot code consolidation from Benjamin Herrenschmidt:
   - Move epapr_paravirt_early_init() to early_init_devtree()
   - cell: Don't use flat device-tree after boot
   - ge_imp3a: Don't use the flat device-tree after boot
   - mpc85xx_ds: Don't use the flat device-tree after boot
   - mpc85xx_rdb: Don't use the flat device-tree after boot
   - Don't test for machine type in rtas_initialize()
   - Don't test for machine type in smp_setup_cpu_maps()
   - dt: Add of_device_compatible_match()
   - Factor do_feature_fixup calls
   - Move 64-bit feature fixup earlier
   - Move 64-bit memory reserves to setup_arch()
   - Use a cachable DART
   - Move FW feature probing out of pseries probe()
   - Put exception configuration in a common place
   - Remove early allocation of the SMU command buffer
   - Move MMU backend selection out of platform code
   - pasemi: Remove IOBMAP allocation from platform probe()
   - mm/hash: Don't use machine_is() early during boot
   - Don't test for machine type to detect HEA special case
   - pmac: Remove spurrious machine type test
   - Move hash table ops to a separate structure
   - Ensure that ppc_md is empty before probing for machine type
   - Move 64-bit probe_machine() to later in the boot process
   - Move 32-bit probe() machine to later in the boot process
   - Get rid of ppc_md.init_early()
   - Move the boot time info banner to a separate function
   - Move setting of {i,d}cache_bsize to initialize_cache_info()
   - Move the content of setup_system() to setup_arch()
   - Move cache info inits to a separate function
   - Re-order the call to smp_setup_cpu_maps()
   - Re-order setup_panic()
   - Make a few boot functions __init
   - Merge 32-bit and 64-bit setup_arch()

  Other new features:
   - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
   - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
   - powerpc: Add module autoloading based on CPU features from Alastair D'Silva
   - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
   - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
   - xmon: Dump ISA 2.06 SPRs from Michael Ellerman
   - xmon: Dump ISA 2.07 SPRs from Michael Ellerman
   - Add a parameter to disable 1TB segs from Oliver O'Halloran
   - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
   - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
   - pseries: Add pseries hotplug workqueue from John Allen
   - pseries: Add support for hotplug interrupt source from John Allen
   - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
   - pseries: Move property cloning into its own routine from Nathan Fontenot
   - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
   - pseries: Auto-online hotplugged memory from Nathan Fontenot
   - pseries: Remove call to memblock_add() from Nathan Fontenot

  cxl:
   - Add set and get private data to context struct from Michael Neuling
   - make base more explicitly non-modular from Paul Gortmaker
   - Use for_each_compatible_node() macro from Wei Yongjun
   - Frederic Barrat
   - Abstract the differences between the PSL and XSL
   - Make vPHB device node match adapter's
   - Philippe Bergheaud
   - Add mechanism for delivering AFU driver specific events
   - Ignore CAPI adapters misplaced in switched slots
   - Refine slice error debug messages
   - Andrew Donnellan
   - static-ify variables to fix sparse warnings
   - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
   - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
   - Add cxl_check_and_switch_mode() API to switch bi-modal cards
   - remove dead Kconfig options
   - fix potential NULL dereference in free_adapter()
   - Ian Munsie
   - Update process element after allocating interrupts
   - Add support for CAPP DMA mode
   - Fix allowing bogus AFU descriptors with 0 maximum processes
   - Fix allocating a minimum of 2 pages for the SPA
   - Fix bug where AFU disable operation had no effect
   - Workaround XSL bug that does not clear the RA bit after a reset
   - Fix NULL pointer dereference on kernel contexts with no AFU interrupts
   - powerpc/powernv: Split cxl code out into a separate file
   - Add cxl_slot_is_supported API
   - Enable bus mastering for devices using CAPP DMA mode
   - Move cxl_afu_get / cxl_afu_put to base
   - Allow a default context to be associated with an external pci_dev
   - Do not create vPHB if there are no AFU configuration records
   - powerpc/powernv: Add support for the cxl kernel api on the real phb
   - Add support for using the kernel API with a real PHB
   - Add kernel APIs to get & set the max irqs per context
   - Add preliminary workaround for CX4 interrupt limitation
   - Add support for interrupts on the Mellanox CX4
   - Workaround PE=0 hardware limitation in Mellanox CX4
   - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n

  selftests:
   - Test unaligned copy and paste from Chris Smart
   - Load Monitor Register Tests from Jack Miller
   - Cyril Bur
   - exec() with suspended transaction
   - Use signed long to read perf_event_paranoid
   - Fix usage message in context_switch
   - Fix generation of vector instructions/types in context_switch
   - Michael Ellerman
   - Use "Delta" rather than "Error" in normal output
   - Import Anton's mmap & futex micro benchmarks
   - Add a test for PROT_SAO"

* tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (263 commits)
  powerpc/mm: Parenthesise IS_ENABLED() in if condition
  tty/hvc: Use opal irqchip interface if available
  tty/hvc: Use IRQF_SHARED for OPAL hvc consoles
  selftests/powerpc: exec() with suspended transaction
  powerpc: Improve comment explaining why we modify VRSAVE
  powerpc/mm: Drop unused externs for hpte_init_beat[_v3]()
  powerpc/mm: Rename hpte_init_lpar() and move the fallback to a header
  powerpc/mm: Fix build break when PPC_NATIVE=n
  crypto: vmx - Convert to CPU feature based module autoloading
  powerpc: Add module autoloading based on CPU features
  powerpc/powernv/ioda: Fix endianness when reading TCEs
  powerpc/mm: Add memory barrier in __hugepte_alloc()
  powerpc/modules: Never restore r2 for a mprofile-kernel style mcount() call
  powerpc/ftrace: Separate the heuristics for checking call sites
  powerpc: Merge 32-bit and 64-bit setup_arch()
  powerpc/64: Make a few boot functions __init
  powerpc: Re-order setup_panic()
  powerpc: Re-order the call to smp_setup_cpu_maps()
  powerpc/32: Move cache info inits to a separate function
  powerpc/64: Move the content of setup_system() to setup_arch()
  ...

On a system with sparse node ids, eg. a powerpc system with 4 nodes
numbered like so:

  node   0: [mem 0x0000000000000000-0x00000007ffffffff]
  node   1: [mem 0x0000000800000000-0x0000000fffffffff]
  node  16: [mem 0x0000001000000000-0x00000017ffffffff]
  node  17: [mem 0x0000001800000000-0x0000001fffffffff]

The code in rand_initialize() will allocate 4 pointers for the pool
array, and initialise them correctly.

However when go to use the pool, in eg. extract_crng(), we use the
numa_node_id() to index into the array. For the higher numbered node ids
this leads to random memory corruption, depending on what was kmalloc'ed
adjacent to the pool array.

Fix it by using nr_node_ids to size the pool array.

Fixes: 1e7f583a ("random: make /dev/urandom scalable for silly userspace programs")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable bugfixes:
   - nfs: don't create zero-length requests

   - several LAYOUTGET bugfixes

  Features:
   - several performance related features

   - more aggressive caching when we can rely on close-to-open
     cache consistency

   - remove serialisation of O_DIRECT reads and writes

   - optimise several code paths to not flush to disk unnecessarily.

     However allow for the idiosyncracies of pNFS for those layout
     types that need to issue a LAYOUTCOMMIT before the metadata can
     be updated on the server.

   - SUNRPC updates to the client data receive path

   - pNFS/SCSI support RH/Fedora dm-mpath device nodes

   - pNFS files/flexfiles can now use unprivileged ports when
     the generic NFS mount options allow it.

  Bugfixes:
   - Don't use RDMA direct data placement together with data
     integrity or privacy security flavours

   - Remove the RDMA ALLPHYSICAL memory registration mode as
     it has potential security holes.

   - Several layout recall fixes to improve NFSv4.1 protocol
     compliance.

   - Fix an Oops in the pNFS files and flexfiles connection
     setup to the DS

   - Allow retry of operations that used a returned delegation
      stateid

   - Don't mark the inode as revalidated if a LAYOUTCOMMIT is
     outstanding

   - Fix writeback races in nfs4_copy_range() and
     nfs42_proc_deallocate()"

* tag 'nfs-for-4.8-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (104 commits)
  pNFS: Actively set attributes as invalid if LAYOUTCOMMIT is outstanding
  NFSv4: Clean up lookup of SECINFO_NO_NAME
  NFSv4.2: Fix warning "variable ‘stateids’ set but not used"
  NFSv4: Fix warning "no previous prototype for ‘nfs4_listxattr’"
  SUNRPC: Fix a compiler warning in fs/nfs/clnt.c
  pNFS: Remove redundant smp_mb() from pnfs_init_lseg()
  pNFS: Cleanup - do layout segment initialisation in one place
  pNFS: Remove redundant stateid invalidation
  pNFS: Remove redundant pnfs_mark_layout_returned_if_empty()
  pNFS: Clear the layout metadata if the server changed the layout stateid
  pNFS: Cleanup - don't open code pnfs_mark_layout_stateid_invalid()
  NFS: pnfs_mark_matching_lsegs_return() should match the layout sequence id
  pNFS: Do not set plh_return_seq for non-callback related layoutreturns
  pNFS: Ensure layoutreturn acts as a completion for layout callbacks
  pNFS: Fix CB_LAYOUTRECALL stateid verification
  pNFS: Always update the layout barrier seqid on LAYOUTGET
  pNFS: Always update the layout stateid if NFS_LAYOUT_INVALID_STID is set
  pNFS: Clear the layout return tracking on layout reinitialisation
  pNFS: LAYOUTRETURN should only update the stateid if the layout is valid
  nfs: don't create zero-length requests
  ...

Pull x86 microcode updates from Thomas Gleixner:

 - more work to make the microcode loader robust

 - a fix for the micro code load precedence

 - fixes for initrd loading with randomized memory

 - less printk noise on SMP machines

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm, x86/microcode: Add __PAGE_OFFSET_BASE define on 32-bit
  x86/microcode/intel: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y
  x86/microcode: Remove unused symbol exports
  x86/microcode/intel: Do not issue microcode updates messages on each CPU
  Documentation/microcode: Document some aspects for more clarity
  x86/microcode/AMD: Make amd_ucode_patch[] static
  x86/microcode/intel: Unexport save_mc_for_early()
  x86/microcode/intel: Rename load_microcode_early() to find_microcode_patch()
  x86/microcode: Propagate save_microcode_in_initrd() retval
  x86/microcode: Get rid of find_cpio_data()'s dummy offset arg
  lib/cpio: Make find_cpio_data()'s offset arg optional
  x86/microcode: Fix suspend to RAM with builtin microcode
  x86/microcode: Fix loading precedence

Pull x86 cpufeature updates from Thomas Gleixner:

 - a workaround for the MONITOR instruction erratum of Goldmont CPUs

 - small fixes and cleanups here and there

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add workaround for MONITOR instruction erratum on Goldmont based CPUs
  x86/cpu: Rename "WESTMERE2" family to "NEHALEM_G"
  x86/amd_nb: Clean up init path
  x86/cpufeature: Add helper macro for mask check macros
  x86/cpufeature: Make sure DISABLED/REQUIRED macros are updated
  x86/cpufeature: Update cpufeaure macros

Pull perf fixes from Thomas Gleixner:
 "This update contains:

   - a fix for the bpf tools to use the new EM_BPF code

   - a fix for the module parser of perf to retrieve the
     proper text start address

   - add str_error_c to libapi to avoid linking against
     tools/lib/str_error_r.o"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools lib api: Add str_error_c to libapi
  perf s390: Fix 'start' address of module's map
  tools lib bpf: Use official ELF e_machine value

Pull misc fixes from Thomas Gleixner:
 "This update contains:

   - a fix for stomp-machine so the nmi_watchdog wont trigger on the cpu
     waiting for the others to execute the callback

   - various fixes and updates to objtool including an resync of the
     instruction decoder to match the kernel's decoder"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Un-capitalize "Warning" for out-of-sync instruction decoder
  objtool: Resync x86 instruction decoder with the kernel's
  objtool: Support new GCC 6 switch jump table pattern
  stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE
  objtool: Add 'fixdep' to objtool/.gitignore

Pull DeviceTree updates from Rob Herring:

 - remove most of_platform_populate() calls in arch code.  Now the DT
   core code calls it in the default case and platforms only need to
   call it if they have special needs

 - use pr_fmt on all the DT core print statements

 - CoreSight binding doc improvements to block name descriptions

 - add dt_to_config script which can parse dts files and list
   corresponding kernel config options

 - fix memory leak hit with a PowerMac DT

 - correct a bunch of STMicro compatible strings to use the correct
   vendor prefix

 - fix DA9052 PMIC binding doc to match what is actually used in dts
   files

* tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
  documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations
  xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table"
  xtensa: Fix build error due to missing include file
  MIPS: ath79: Add missing include file
  Fix spelling errors in Documentation/devicetree
  ARM: dts: fix STMicroelectronics compatible strings
  powerpc/dts: fix STMicroelectronics compatible strings
  Documentation: dt: i2c: use correct STMicroelectronics vendor prefix
  scripts/dtc: dt_to_config - kernel config options for a devicetree
  of: fdt: mark unflattened tree as detached
  of: overlay: add resolver error prints
  coresight: document binding acronyms
  Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties
  of: use pr_fmt prefix for all console printing
  of/irq: Mark initialised interrupt controllers as populated
  of: fix memory leak related to safe_name()
  Revert "of/platform: export of_default_bus_match_table"
  of: unittest: use of_platform_default_populate() to populate default bus
  memory: omap-gpmc: use of_platform_default_populate() to populate default bus
  bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus
  ...

Pull clk updates from Michael Turquette:
 "The bulk of the changes are updates and fixes to existing clk provider
  drivers, along with a pretty standard number of new drivers.  The core
  recieved a small number of updates as well.

  Core changes of note:
   - removed CLK_IS_ROOT flag

  New clk provider drivers:
   - Renesas r8a7796 clock pulse generator / module standby and
     software reset
   - Allwinner sun8i H3 clock controller unit
   - AmLogic meson8b clock controller (rewritten)
   - AmLogic gxbb clock controller
   - support for some new ICs was added by simple changes to static
     data tables for chips sharing the same family

  Driver updates of note:
   - the Allwinner sunxi clock driver infrastucture was rewritten to
     comform to the state of the art at drivers/clk/sunxi-ng.  The old
     implementation is still supported for backwards compatibility with
     the DT ABI"

* tag 'clk-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
  clk: Makefile: re-sort and clean up
  Revert "clk: gxbb: expose CLKID_MMC_PCLK"
  clk: samsung: Allow modular build of the Audio Subsystem CLKCON driver
  clk: samsung: make clk-s5pv210-audss explicitly non-modular
  clk: exynos5433: remove CLK_IGNORE_UNUSED flag from SPI clocks
  clk: oxnas: Add hardware dependencies
  clk: imx7d: do not set parent of ethernet time/ref clocks
  ARM: dt: sun8i: switch the H3 to the new CCU driver
  clk: sunxi-ng: h3: Fix Kconfig symbol typo
  clk: sunxi-ng: h3: Fix audio clock divider offset
  clk: sunxi-ng: Add H3 clocks
  clk: sunxi-ng: Add N-K-M-P factor clock
  clk: sunxi-ng: Add N-K-M Factor clock
  clk: sunxi-ng: Add N-M-factor clock support
  clk: sunxi-ng: Add N-K-factor clock support
  clk: sunxi-ng: Add M-P factor clock support
  clk: sunxi-ng: Add divider
  clk: sunxi-ng: Add phase clock support
  clk: sunxi-ng: Add mux clock support
  clk: sunxi-ng: Add gate clock support
  ...

Freescale updates from Scott:

"Highlights include more 8xx optimizations, device tree updates,
and MVME7100 support."

Pull audit updates from Paul Moore:
 "Six audit patches for 4.8.

  There are a couple of style and minor whitespace tweaks for the logs,
  as well as a minor fixup to catch errors on user filter rules, however
  the major improvements are a fix to the s390 syscall argument masking
  code (reviewed by the nice s390 folks), some consolidation around the
  exclude filtering (less code, always a win), and a double-fetch fix
  for recording the execve arguments"

* 'stable-4.8' of git://git.infradead.org/users/pcmoore/audit:
  audit: fix a double fetch in audit_log_single_execve_arg()
  audit: fix whitespace in CWD record
  audit: add fields to exclude filter by reusing user filter
  s390: ensure that syscall arguments are properly masked on s390
  audit: fix some horrible switch statement style crimes
  audit: fixup: log on errors from filter user rules

Pull security subsystem updates from James Morris:
 "Highlights:

   - TPM core and driver updates/fixes
   - IPv6 security labeling (CALIPSO)
   - Lots of Apparmor fixes
   - Seccomp: remove 2-phase API, close hole where ptrace can change
     syscall #"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits)
  apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling
  tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family)
  tpm: Factor out common startup code
  tpm: use devm_add_action_or_reset
  tpm2_i2c_nuvoton: add irq validity check
  tpm: read burstcount from TPM_STS in one 32-bit transaction
  tpm: fix byte-order for the value read by tpm2_get_tpm_pt
  tpm_tis_core: convert max timeouts from msec to jiffies
  apparmor: fix arg_size computation for when setprocattr is null terminated
  apparmor: fix oops, validate buffer size in apparmor_setprocattr()
  apparmor: do not expose kernel stack
  apparmor: fix module parameters can be changed after policy is locked
  apparmor: fix oops in profile_unpack() when policy_db is not present
  apparmor: don't check for vmalloc_addr if kvzalloc() failed
  apparmor: add missing id bounds check on dfa verification
  apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task
  apparmor: use list_next_entry instead of list_entry_next
  apparmor: fix refcount race when finding a child profile
  apparmor: fix ref count leak when profile sha1 hash is read
  apparmor: check that xindex is in trans_table bounds
  ...

Pull userns vfs updates from Eric Biederman:
 "This tree contains some very long awaited work on generalizing the
  user namespace support for mounting filesystems to include filesystems
  with a backing store.  The real world target is fuse but the goal is
  to update the vfs to allow any filesystem to be supported.  This
  patchset is based on a lot of code review and testing to approach that
  goal.

  While looking at what is needed to support the fuse filesystem it
  became clear that there were things like xattrs for security modules
  that needed special treatment.  That the resolution of those concerns
  would not be fuse specific.  That sorting out these general issues
  made most sense at the generic level, where the right people could be
  drawn into the conversation, and the issues could be solved for
  everyone.

  At a high level what this patchset does a couple of simple things:

   - Add a user namespace owner (s_user_ns) to struct super_block.

   - Teach the vfs to handle filesystem uids and gids not mapping into
     to kuids and kgids and being reported as INVALID_UID and
     INVALID_GID in vfs data structures.

  By assigning a user namespace owner filesystems that are mounted with
  only user namespace privilege can be detected.  This allows security
  modules and the like to know which mounts may not be trusted.  This
  also allows the set of uids and gids that are communicated to the
  filesystem to be capped at the set of kuids and kgids that are in the
  owning user namespace of the filesystem.

  One of the crazier corner casees this handles is the case of inodes
  whose i_uid or i_gid are not mapped into the vfs.  Most of the code
  simply doesn't care but it is easy to confuse the inode writeback path
  so no operation that could cause an inode write-back is permitted for
  such inodes (aka only reads are allowed).

  This set of changes starts out by cleaning up the code paths involved
  in user namespace permirted mounts.  Then when things are clean enough
  adds code that cleanly sets s_user_ns.  Then additional restrictions
  are added that are possible now that the filesystem superblock
  contains owner information.

  These changes should not affect anyone in practice, but there are some
  parts of these restrictions that are changes in behavior.

   - Andy's restriction on suid executables that does not honor the
     suid bit when the path is from another mount namespace (think
     /proc/[pid]/fd/) or when the filesystem was mounted by a less
     privileged user.

   - The replacement of the user namespace implicit setting of MNT_NODEV
     with implicitly setting SB_I_NODEV on the filesystem superblock
     instead.

     Using SB_I_NODEV is a stronger form that happens to make this state
     user invisible.  The user visibility can be managed but it caused
     problems when it was introduced from applications reasonably
     expecting mount flags to be what they were set to.

  There is a little bit of work remaining before it is safe to support
  mounting filesystems with backing store in user namespaces, beyond
  what is in this set of changes.

   - Verifying the mounter has permission to read/write the block device
     during mount.

   - Teaching the integrity modules IMA and EVM to handle filesystems
     mounted with only user namespace root and to reduce trust in their
     security xattrs accordingly.

   - Capturing the mounters credentials and using that for permission
     checks in d_automount and the like.  (Given that overlayfs already
     does this, and we need the work in d_automount it make sense to
     generalize this case).

  Furthermore there are a few changes that are on the wishlist:

   - Get all filesystems supporting posix acls using the generic posix
     acls so that posix_acl_fix_xattr_from_user and
     posix_acl_fix_xattr_to_user may be removed.  [Maintainability]

   - Reducing the permission checks in places such as remount to allow
     the superblock owner to perform them.

   - Allowing the superblock owner to chown files with unmapped uids and
     gids to something that is mapped so the files may be treated
     normally.

  I am not considering even obvious relaxations of permission checks
  until it is clear there are no more corner cases that need to be
  locked down and handled generically.

  Many thanks to Seth Forshee who kept this code alive, and putting up
  with me rewriting substantial portions of what he did to handle more
  corner cases, and for his diligent testing and reviewing of my
  changes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (30 commits)
  fs: Call d_automount with the filesystems creds
  fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns
  evm: Translate user/group ids relative to s_user_ns when computing HMAC
  dquot: For now explicitly don't support filesystems outside of init_user_ns
  quota: Handle quota data stored in s_user_ns in quota_setxquota
  quota: Ensure qids map to the filesystem
  vfs: Don't create inodes with a uid or gid unknown to the vfs
  vfs: Don't modify inodes with a uid or gid unknown to the vfs
  cred: Reject inodes with invalid ids in set_create_file_as()
  fs: Check for invalid i_uid in may_follow_link()
  vfs: Verify acls are valid within superblock's s_user_ns.
  userns: Handle -1 in k[ug]id_has_mapping when !CONFIG_USER_NS
  fs: Refuse uid/gid changes which don't map into s_user_ns
  selinux: Add support for unprivileged mounts from user namespaces
  Smack: Handle labels consistently in untrusted mounts
  Smack: Add support for unprivileged mounts from user namespaces
  fs: Treat foreign mounts as nosuid
  fs: Limit file caps to the user namespace of the super block
  userns: Remove the now unnecessary FS_USERNS_DEV_MOUNT flag
  userns: Remove implicit MNT_NODEV fragility.
  ...

Buck and LDO binding name changes.

The binding names for the regulators have been changed to match the current
expectation from existing device tree source files.

This fix rectifies the disparity between what currently exists in some
.dts[i] board files and what is listed in this binding document. This
change re-aligns those differences and also brings the binding document
in-line with the expectations of the product datasheet from Dialog
Semiconductor.

Bucks and LDOs now follow the expected notation:
{ buck1, buck2, buck3, buck4 }
{ ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10 }
Signed-off-by: NSteve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: NRob Herring <robh@kernel.org>

Pull power management fix from Rafael Wysocki:
 "Fix a nasty (and really hard to debug) memory corruption during resume
  from hibernation on x86-64 (that leads to a kernel panic most of the
  time) due to the use of a stale stack pointer value in FRAME_BEGIN
  (Josh Poimboeuf)"

* tag 'pm-urgent-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  x86/power/64: Fix hibernation return address corruption