So we start our freeze, somebody comes in and does an fsync() on a file
where we have to commit a transaction for whatever reason, and we will
deadlock because the freeze is waiting on FS_FREEZE people to stop writing
to the file system, but the transaction is waiting for its free space inodes
to be written out, which are in turn waiting on sb_start_intwrite while
trying to write the file extents.  To fix this we'll just skip the
sb_start_intwrite() if we TRANS_JOIN_NOLOCK since we're being waited on by a
transaction commit so we're safe wrt to freeze and this will keep us from
deadlocking.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

nocow_only is now an obsolete argument.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>

I screwed this up, there is a race between checking if there is a running
transaction and actually starting a transaction in sync where we could race
with a freezer and get ourselves into trouble.  To fix this we need to make
a new join type to only do the try lock on the freeze stuff.  If it fails
we'll return EPERM and just return from sync.  This fixes a hang Liu Bo
reported when running xfstest 68 in a loop.  Thanks,
Reported-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

So we have lots of places where we try to preallocate chunks in order to
make sure we have enough space as we make our allocations.  This has
historically meant that we're constantly tweaking when we should allocate a
new chunk, and historically we have gotten this horribly wrong so we way
over allocate either metadata or data.  To try and keep this from happening
we are going to make it so that the block group item insertion is done out
of band at the end of a transaction.  This will allow us to create chunks
even if we are trying to make an allocation for the extent tree.  With this
patch my enospc tests run faster (didn't expect this) and more efficiently
use the disk space (this is what I wanted).  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Sage reported the following lockdep backtrace

=====================================
[ BUG: bad unlock balance detected! ]
3.6.0-rc2-ceph-00171-gc7ed62d #1 Not tainted
-------------------------------------
btrfs-cleaner/7607 is trying to release lock (sb_internal) at:
[<ffffffffa00422ae>] btrfs_commit_transaction+0xa6e/0xb20 [btrfs]
but there are no more locks to release!

other info that might help us debug this:
1 lock held by btrfs-cleaner/7607:
 #0:  (&fs_info->cleaner_mutex){+.+...}, at: [<ffffffffa003b405>] cleaner_kthread+0x95/0x120 [btrfs]

stack backtrace:
Pid: 7607, comm: btrfs-cleaner Not tainted 3.6.0-rc2-ceph-00171-gc7ed62d #1
Call Trace:
 [<ffffffffa00422ae>] ? btrfs_commit_transaction+0xa6e/0xb20 [btrfs]
 [<ffffffff810afa9e>] print_unlock_inbalance_bug+0xfe/0x110
 [<ffffffff810b289e>] lock_release_non_nested+0x1ee/0x310
 [<ffffffff81172f9b>] ? kmem_cache_free+0x7b/0x160
 [<ffffffffa004106c>] ? put_transaction+0x8c/0x130 [btrfs]
 [<ffffffffa00422ae>] ? btrfs_commit_transaction+0xa6e/0xb20 [btrfs]
 [<ffffffff810b2a95>] lock_release+0xd5/0x220
 [<ffffffff81173071>] ? kmem_cache_free+0x151/0x160
 [<ffffffff8117d9ed>] __sb_end_write+0x7d/0x90
 [<ffffffffa00422ae>] btrfs_commit_transaction+0xa6e/0xb20 [btrfs]
 [<ffffffff81079850>] ? __init_waitqueue_head+0x60/0x60
 [<ffffffff81634c6b>] ? _raw_spin_unlock+0x2b/0x40
 [<ffffffffa0042758>] __btrfs_end_transaction+0x368/0x3c0 [btrfs]
 [<ffffffffa0042808>] btrfs_end_transaction_throttle+0x18/0x20 [btrfs]
 [<ffffffffa00318f0>] btrfs_drop_snapshot+0x410/0x600 [btrfs]
 [<ffffffff8132babd>] ? do_raw_spin_unlock+0x5d/0xb0
 [<ffffffffa00430ef>] btrfs_clean_old_snapshots+0xaf/0x150 [btrfs]
 [<ffffffffa003b405>] ? cleaner_kthread+0x95/0x120 [btrfs]
 [<ffffffffa003b419>] cleaner_kthread+0xa9/0x120 [btrfs]
 [<ffffffffa003b370>] ? btrfs_destroy_delayed_refs.isra.102+0x220/0x220 [btrfs]
 [<ffffffff810791ee>] kthread+0xae/0xc0
 [<ffffffff810b379d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff8163e744>] kernel_thread_helper+0x4/0x10
 [<ffffffff81635430>] ? retint_restore_args+0x13/0x13
 [<ffffffff81079140>] ? flush_kthread_work+0x1a0/0x1a0
 [<ffffffff8163e740>] ? gs_change+0x13/0x13

This is because the throttle stuff can commit the transaction, which expects to
be the one stopping the intwrite stuff, but we've already done it in the
__btrfs_end_transaction.  Moving the sb_end_intewrite after this logic makes the
lockdep go away.  Thanks,
Tested-by: NSage Weil <sage@inktank.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

When we delete a inode, we will remove all the delayed items including delayed
inode update, and then truncate all the relative metadata. If there is lots of
metadata, we will end the current transaction, and start a new transaction to
truncate the left metadata. In this way, we will leave a inode item that its
link counter is > 0, and also may leave some directory index items in fs/file tree
after the current transaction ends. In other words, the metadata in this fs/file tree
is inconsistent. If we create a snapshot for this tree now, we will find a inode with
corrupted metadata in the new snapshot, and we won't continue to drop the left metadata,
because its link counter is not 0.

We fix this problem by updating the inode item before the current transaction ends.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

The snapshot should be the image of the fs tree before it was created,
so the metadata of the snapshot should not exist in the its tree. But now, we
found the directory item and directory name index is in both the snapshot tree
and the fs tree. It introduces some problems and makes the users feel strange:

 # mkfs.btrfs /dev/sda1
 # mount /dev/sda1 /mnt
 # mkdir /mnt/1
 # cd /mnt/1
 # btrfs subvolume snapshot /mnt snap0
 # ls -a /mnt/1/snap0/1
 .	..	[no other file/dir]

 # ll /mnt/1/snap0/
 total 0
 drwxr-xr-x 1 root root 10 Ju1 24 12:11 1
			^^^
			There is no file/dir in it, but it's size is 10

 # cd /mnt/1/snap0/1/snap0
 [Enter a unexisted directory successfully...]

There is nothing in the directory 1 in snap0, but btrfs told the length of
this directory is 10. Beside that, we can enter an unexisted directory, it is
very strange to the users.

 # btrfs subvolume snapshot /mnt/1/snap0 /mnt/snap1
 # ll /mnt/1/snap0/1/
 total 0
 [None]
 # ll /mnt/snap1/1/
 total 0
 drwxr-xr-x 1 root root 0 Ju1 24 12:14 snap0

And the source of snap1 did have any directory in Directory 1, but snap1 have
a snap0, it is different between the source and the snapshot.

So I think we should insert directory item and directory name index and update
the parent inode as the last step of snapshot creation, and do not leave the
useless metadata in the file tree.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

If we create several snapshots at the same time, the following BUG_ON() will be
triggered.

	kernel BUG at fs/btrfs/extent-tree.c:6047!

Steps to reproduce:
 # mkfs.btrfs <partition>
 # mount <partition> <mnt>
 # cd <mnt>
 # for ((i=0;i<2400;i++)); do touch long_name_to_make_tree_more_deep$i; done
 # for ((i=0; i<4; i++))
 > do
 > mkdir $i
 > for ((j=0; j<200; j++))
 > do
 > btrfs sub snap . $i/$j
 > done &
 > done

The reason is:
Before transaction commit, some operations changed the fs tree and new tree
blocks were allocated because of COW. We used the implicit non-shared back
reference for those newly allocated tree blocks because they were not shared by
two or more trees.

And then we created the first snapshot for the fs tree, according to the back
reference rules, we also used implicit back refs for the child tree blocks of
the root node of the fs tree, now those child nodes/leaves were shared by two
trees.

Then We didn't deal with the delayed references, and continued to change the fs
tree(created the second snapshot and inserted the dir item of the new snapshot
into the fs tree). According to the rules of the back reference, we added full
back refs for those tree blocks whose parents have be shared by two trees.
Now some newly allocated tree blocks had two types of the references.

As we know, the delayed reference system handles these delayed references from
back to front, and the full delayed reference is inserted after the implicit
ones. So when we dealt with the back references of those newly allocated tree
blocks, the full references was dealt with at first. And if the first reference
is a shared back reference and the tree block that the reference points to is
newly allocated, It would be considered as a tree block which is shared by two
or more trees when it is allocated and should be a full back reference not a
implicit one, the flag of its reference also should be set to FULL_BACKREF.
But in fact, it was a non-shared tree block with a implicit reference at
beginning, so it was not compulsory to set the flags to FULL_BACKREF. So BUG_ON
was triggered.

We have several methods to fix this bug:
1. deal with delayed references after the snapshot is created and before we
   change the source tree of the snapshot. This is the easiest and safest way.
2. modify the sort method of the delayed reference tree, make the full delayed
   references be inserted before the implicit ones. It is also very easy, but
   I don't know if it will introduce some problems or not.
3. modify select_delayed_ref() and make it select the implicit delayed reference
   at first. This way is not so good because it may wastes CPU time if we have
   lots of delayed references.
4. set the flags to FULL_BACKREF, this method is a little complex comparing with
   the 1st way.

I chose the 1st way to fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

This patch fixes the following problem:
- If we failed to deal with the delayed dir items, we should abort transaction,
  just as its comment said. Fix it.
- If root reference or root back reference insertion failed, we should
  abort transaction. Fix it.
- Fix the double free problem of pending->inherit.
- Do not restore the trans->rsv if we doesn't change it.
- make the error path more clearly.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

We expect current->journal_info to point to the trans handle we are
committing.
Signed-off-by: NSage Weil <sage@inktank.com>

The freeze rwsem is taken by sb_start_intwrite() and dropped during the
commit_ or end_transaction().  In the async case, that happens in a worker
thread.  Tell lockdep the calling thread is releasing ownership of the
rwsem and the async thread is picking it up.

XFS plays the same trick in fs/xfs/xfs_aops.c.
Signed-off-by: NSage Weil <sage@inktank.com>

When we created a new snapshot, the mtime and ctime of its parent directory
were not updated. Fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

"trans->transid" is cpu endian but we want to store the data as little
endian.  "item->ctime.nsec" is only 32 bits, not 64.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>

We convert btrfs_file_aio_write() to use new freeze check.  We also add proper
freeze protection to btrfs_page_mkwrite(). We also add freeze protection to
the transaction mechanism to avoid starting transactions on frozen filesystem.
At minimum this is necessary to stop iput() of unlinked file to change frozen
filesystem during truncation.

Checks in cleaner_kthread() and transaction_kthread() can be safely removed
since btrfs_freeze() will lock the mutexes and thus block the threads (and they
shouldn't have anything to do anyway).

CC: linux-btrfs@vger.kernel.org
CC: Chris Mason <chris.mason@oracle.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch introduces uuids for subvolumes. Each
subvolume has it's own uuid. In case it was snapshotted,
it also contains parent_uuid. In case it was received,
it also contains received_uuid.

It also introduces subvolume ctime/otime/stime/rtime. The
first two are comparable to the times found in inodes. otime
is the origin/creation time and ctime is the change time.
stime/rtime are only valid on received subvolumes.
stime is the time of the subvolume when it was
sent. rtime is the time of the subvolume when it was
received.

Additionally to the times, we have a transid for each
time. They are updated at the same place as the times.

btrfs receive uses stransid and rtransid to find out
if a received subvolume changed in the meantime.

If an older kernel mounts a filesystem with the
extented fields, all fields become invalid. The next
mount with a new kernel will detect this and reset the
fields.
Signed-off-by: NAlexander Block <ablock84@googlemail.com>
Reviewed-by: NDavid Sterba <dave@jikos.cz>
Reviewed-by: NArne Jansen <sensille@gmx.net>
Reviewed-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Reviewed-by: NAlex Lyakas <alex.bolshoy.btrfs@gmail.com>

There is weird logic I had to put in place to make sure that when we were
adding csums that we'd used the delalloc block rsv instead of the global
block rsv.  Part of this meant that we had to free up our transaction
reservation before we ran the delayed refs since csum deletion happens
during the delayed ref work.  The problem with this is that when we release
a reservation we will add it to the global reserve if it is not full in
order to keep us going along longer before we have to force a transaction
commit.  By releasing our reservation before we run delayed refs we don't
get the opportunity to drain down the global reserve for the work we did, so
we won't refill it as often.  This isn't a problem per-se, it just results
in us possibly committing transactions more and more often, and in rare
cases could cause those WARN_ON()'s to pop in use_block_rsv because we ran
out of space in our block rsv.

This also helps us by holding onto space while the delayed refs run so we
don't end up with as many people trying to do things at the same time, which
again will help us not force commits or hit the use_block_rsv warnings.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

"root->fs_info" and "fs_info" are the same, but "fs_info" is prefered
because it is shorter and that's what is used in the rest of the
function.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>

Waiting on spindles improves performance, but ssds want all the
IO as quickly as we can push it down.
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When creating a subvolume or snapshot, it is necessary
to initialize the qgroup account with a copy of some
other (tracking) qgroup. This patch adds parameters
to the ioctls to pass the information from which qgroup
to inherit.
Signed-off-by: NArne Jansen <sensille@gmx.net>

Like block reserves, reserve a small piece of space on each
transaction start and for delalloc. These are the hooks that
can actually return EDQUOT to the user.
The amount of space reserved is tracked in the transaction
handle.
Signed-off-by: NArne Jansen <sensille@gmx.net>

Hooks into qgroup code to record refs and into transaction commit.
This is the main entry point for qgroup. Basically every change in
extent backrefs got accounted to the appropriate qgroups.
Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

This patch only add a consistancy check to validate that the
same root is passed to start_transaction and end_transaction.
Subvolume quota depends on this.
Signed-off-by: NArne Jansen <sensille@gmx.net>

We've got two mechanisms both required for reliable backref resolving (tree
mod log and holding back delayed refs). You cannot make use of one without
the other. So instead of requiring the user of this mechanism to setup both
correctly, we join them into a single interface.

Additionally, we stop inserting non-blockers into fs_info->tree_mod_seq_list
as we did before, which was of no value.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

If a transaction commit fails we don't abort it so we don't set an error on
the file system.  This patch fixes that by actually calling the abort stuff
and then adding a check for a fs error in the transaction start stuff to
make sure it is caught properly.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

I was getting lots of hung tasks and a NULL pointer dereference because we
are not cleaning up the transaction properly when it aborts.  First we need
to reset the running_transaction to NULL so we don't get a bad dereference
for any start_transaction callers after this.  Also we cannot rely on
waitqueue_active() since it's just a list_empty(), so just call wake_up()
directly since that will do the barrier for us and such.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

The device statistics are written into the device tree with each
transaction commit. Only modified statistics are written.
When a filesystem is mounted, the device statistics for each involved
device are read from the device tree and used to initialize the
counters.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>

When a fresh transaction begins, the tree mod log must be clean. Users of
the tree modification log must ensure they never span across transaction
boundaries.

We reset the sequence to 0 in this safe situation to make absolutely sure
overflow can't happen.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

Added in commit 49b25e05
("btrfs: enhance transaction abort infrastructure")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

49b25e05 introduced a use-after-free bug
that caused spurious -EIO's to be returned.

Do the check before we free the transaction.

Cc: David Sterba <dsterba@suse.cz>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

o For space info, the type of space info is useful for debug.
o For transaction handle, its transid is useful.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The two helper functions commit_cowonly_roots() and
create_pending_snapshot() failed to check the return value from
btrfs_cow_block(), which could at least in theory fail with -ENOSPC from
btrfs_alloc_free_block(). This commit adds the missing checks.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>

 btrfs currently handles most errors with BUG_ON. This patch is a work-in-
 progress but aims to handle most errors other than internal logic
 errors and ENOMEM more gracefully.

 This iteration prevents most crashes but can run into lockups with
 the page lock on occasion when the timing "works out."
Signed-off-by: NJeff Mahoney <jeffm@suse.com>

Signed-off-by: NJeff Mahoney <jeffm@suse.com>

Commit cb1b69f4 (Btrfs: forced readonly when btrfs_drop_snapshot() fails)
made btrfs_drop_snapshot return void because there were no callers checking
the return value. That is the wrong order to handle error propogation since
the caller will have no idea that an error has occured and continue on
as if nothing went wrong.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>

Signed-off-by: NJeff Mahoney <jeffm@suse.com>

The enospc tracing code added some interesting uses of
u64 pointer casts.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This allows us to gracefully continue if we aren't able to insert
directory items, both for normal files/dirs and snapshots.
Signed-off-by: NChris Mason <chris.mason@oracle.com>