sound/pci/hda/patch_realtek.c: In function ‘alc_apply_fixup’:
  sound/pci/hda/patch_realtek.c:1724:14: warning: unused variable ‘modelname’

snd_printdd() is evaluated only when CONFIG_SND_DEBUG_VERBOSE=y.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It seems working well with model=hp-bpc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reverts commit 03b7a1ab.

This commit was mistakenly re-introduced.  While the change is harmless
(as ALC887 uses patch_alc888() now), we should get rid of any wrong code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixes for HP 2011 notebooks: enable dock ports and disable BTL
initialization in the driver.
Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the new PCI ID 0x15ad and device ID 0x1977 for VMware HDAudio
Controller.

[changed to use AZX_DRIVER_GENERIC by tiwai]
Signed-off-by: NBankim Bhavsar <bbhavsar@vmware.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Attached a patch which add a new model to support multi-streaming
playback for ad1988.

playback another stereo stream through the front panel headphone on
device 2 while playback through the speakers connected to rear panel
on device 0 at the same time.

Tested with ad1988a rev2 codec on asus P5B-V motherboard.
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix playback/capture channels patch to change supported playback
channels of au8830 to 1,2,4 and capture channels to 1,2.
This prevent oops when oss emulation use SNDCTL_DSP_CHANNELS to
set 3 Channels
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NHanno Boeck <hanno@hboeck.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit ad09fc9d didn't cover the
case for Intel and Nvidia HDMIs, where hdmi_pcm_open() is called.
Put the hw_constraint there, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In hdmi_pcm_open(), the evaluated PCM hw parameters are stored in
hinfo, but these aren't properly set back to the current runtime
record since these have been set beforehand in azx_pcm_open().
This patch fixes the behavior.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Accidentally exchanging register addresses and register values leads to
many strange errors ...
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It looks like that HDMI codecs don't support the odd number of channels
although HD-audio spec doesn't have the restriction.  Add the
hw_constraint to limit to only the even number of channels.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In some cases, the fix-up is required in the init callback to be called
both at the first initialization and at the resume.  The new action type
ALC_FIXUP_ACT_INIT is used for this case.

So far, only ALC275_FIXUP_SONY_HWEQ uses this.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of keeping various data types in a single record, put the
type field and keep a single value in each entry, but allows chaining
multiple fixup entries.  This allows more flexible data management
(see ALC275_FIXUP_SONY_HWEQ for example).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This should be applied also only once as a part of the initialization.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The amp-override is necessary only once at initialization time.
Also fixed a coding style issue.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... and a minor cleanup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When only one mic is available and it's an analog mic, the current
IDT/STAC parser may give an Oops.

Reference: bko#25692
	https://bugzilla.kernel.org/show_bug.cgi?id=25692Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

With GPIO2-fixup, another fixup for NID 0x19 was missing because the
fixup is applied only once.  Add the corresponding verb to the entry.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

SONY VAIO ALC275 default BIOS verb set the hardware EQ to disable.
Enable it when driver is loading.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Apparently, this card uses the other I2S input.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Lenovo NB 0x9e54 use the external AMP in an inverted manner.
Set EAPD to low will enable the AMP.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The proper initializatio of NID 0x15 EAPD is missing in the quirk for
Acer 4930G.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added hardware constraint in patch_hdmi.c to disable
channels 4/6 which are not supported by some older
NVIDIA GPUs.
Signed-off-by: NNitin Daga <ndaga@nvidia.com>
Acked-By: NStephen Warren <swarren@nvidia.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The dynamic PCM restriction based on ELD information may lead to the
problem in some cases, e.g. when the receiver is turned off.  Then it
may send a TV HDMI default such as channels = 2.  Since it's still
plugged, the driver doesn't know whether it's the right configuration
for future use.  Now, when an app opens the device at this moment,
then turn on the receiver, the app still sends channels=2.

The right solution is to implement some kind of notification and
automatic re-open mechanism.  But, this is a goal far ahead.

This patch provides a workaround for such a case by providing a new
module option static_hdmi_pcm for snd-hda-codec-hdmi module.  When
this is set to true, the driver doesn't change PCM parameters per
ELD information.  For users who need the static configuration like
the scenario above, set this to true.

The parameter can be changed dynamically via sysfs, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

When unplugged, we shouldn't refer to ELD information for PCM open
any more.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

Add a mixer control to switch between the optical and coaxial S/PDIF
inputs on the HT-Omega Claro and Claro halo cards.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Enable the X-Meridian's CD input and the X-Meridian 2G's potential
MIDI ports.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of the generic Oxygen, use the actual card name, if known.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Apparently, the revision is 2 on all sold sound cards, so this
information is not actually useful.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a mixer control to select between the on-board and extension board
S/PDIF inputs for the X-Meridian (2G).
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a mixer control to prevent capturing S/PDIF samples that are not
marked as valid (non-audio or corrupted samples).
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Simplify the info callback by using the snd_ctl_enum_info() helper function.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Simplify info callbacks by using the snd_ctl_enum_info() helper function.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Simplify the info callback by using the snd_ctl_enum_info() helper function.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Introduce the helper function snd_ctl_enum_info() to fill out the
elem_info fields for an enumerated control.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add experimental support for the Asus Xonar HDAV1.3 Slim sound card.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>