to #28736503

commit 801dd57bd1d8c2c253f43635a3045bfa32a810b3 upstream

For an exiting process it tries to cancel all its inflight requests. Use
req->task to match such instead of work.pid. We always have req->task
set, and it will be valid because we're matching only current exiting
task.

Also, remove work.pid and everything related, it's useless now.
Reported-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 4dd2824d6d5914949b5fe589538bc2622d84c5dd upstream

There will be multiple places where req->task is used, so refcount-pin
it lazily with introduced *io_{get,put}_req_task(). We need to always
have valid ->task for cancellation reasons, but don't care about pinning
it in some cases. That's why it sets req->task in io_req_init() and
implements get/put laziness with a flag.

This also removes using @current from polling io_arm_poll_handler(),
etc., but doesn't change observable behaviour.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 67c4d9e693e3bb7fb968af24e3584f821a78ba56 upstream

Instead of waiting for each request one by one, first try to cancel all
of them in a batched manner, and then go over inflight_list/etc to reap
leftovers.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 44e728b8aae0bb6d4229129083974f9dea43f50b upstream

If a process is going away, io_uring_flush() will cancel only 1
request with a matching pid. Cancel all of them
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 4f26bda1522c35d2701fc219368c7101c17005c1 upstream

This adds support for cancelling all io-wq works matching a predicate.
It isn't used yet, so no change in observable behaviour.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 59960b9deb5354e4cdb0b6ed3a3b653a2b4eb602 upstream

Don't leave garbage in req.work before punting async on -EAGAIN
in io_iopoll_queue().

[  140.922099] general protection fault, probably for non-canonical
     address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI
...
[  140.922105] RIP: 0010:io_worker_handle_work+0x1db/0x480
...
[  140.922114] Call Trace:
[  140.922118]  ? __next_timer_interrupt+0xe0/0xe0
[  140.922119]  io_wqe_worker+0x2a9/0x360
[  140.922121]  ? _raw_spin_unlock_irqrestore+0x24/0x40
[  140.922124]  kthread+0x12c/0x170
[  140.922125]  ? io_worker_handle_work+0x480/0x480
[  140.922126]  ? kthread_park+0x90/0x90
[  140.922127]  ret_from_fork+0x22/0x30

Fixes: 7cdaf587de7c ("io_uring: avoid whole io_wq_work copy for requests completed inline")
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 405a5d2b2762f2a9813efdee93274d4e7bf607a1 upstream

Basically IORING_OP_POLL_ADD command and async armed poll handlers
for regular commands don't touch io_wq_work, so only REQ_F_WORK_INITIALIZED
is set, can we do io_wq_work copy and restore.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 18bceab101adde8f38de76016bc77f3f25cf22f4 upstream

Some file descriptors use separate waitqueues for their f_ops->poll()
handler, most commonly one for read and one for write. The io_uring
poll implementation doesn't work with that, as the 2nd poll_wait()
call will cause the io_uring poll request to -EINVAL.

This affects (at least) tty devices and /dev/random as well. This is a
big problem for event loops where some file descriptors work, and others
don't.

With this fix, io_uring handles multiple waitqueues.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 65a6543da386838f935d2f03f452c5c0acff2a68 upstream

While testing io_uring in arm, we found sometimes io_sq_thread() keeps
polling io requests even though there are not inflight io requests in
block layer. After some investigations, found a possible race about
io_kiocb.flags, see below race codes:
  1) in the end of io_write() or io_read()
    req->flags &= ~REQ_F_NEED_CLEANUP;
    kfree(iovec);
    return ret;

  2) in io_complete_rw_iopoll()
    if (res != -EAGAIN)
        req->flags |= REQ_F_IOPOLL_COMPLETED;

In IOPOLL mode, io requests still maybe completed by interrupt, then
above codes are not safe, concurrent modifications to req->flags, which
is not protected by lock or is not atomic modifications. I also had
disassemble io_complete_rw_iopoll() in arm:
   req->flags |= REQ_F_IOPOLL_COMPLETED;
   0xffff000008387b18 <+76>:    ldr     w0, [x19,#104]
   0xffff000008387b1c <+80>:    orr     w0, w0, #0x1000
   0xffff000008387b20 <+84>:    str     w0, [x19,#104]

Seems that the "req->flags |= REQ_F_IOPOLL_COMPLETED;" is  load and
modification, two instructions, which obviously is not atomic.

To fix this issue, add a new iopoll_completed in io_kiocb to indicate
whether io request is completed.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 310672552f4aea2ad50704711aa3cdd45f5441e9 upstream

If the request is still hashed in io_async_task_func(), then it cannot
have been canceled and it's pointless to check. So save that check.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 7cdaf587de7c6f494b8433fded19f7728e70e1ef upstream

If requests can be submitted and completed inline, we don't need to
initialize whole io_wq_work in io_init_req(), which is an expensive
operation, add a new 'REQ_F_WORK_INITIALIZED' to determine whether
io_wq_work is initialized and add a helper io_req_init_async(), users
must call io_req_init_async() for the first time touching any members
of io_wq_work.

I use /dev/nullb0 to evaluate performance improvement in my physical
machine:
  modprobe null_blk nr_devices=1 completion_nsec=0
  sudo taskset -c 60 fio  -name=fiotest -filename=/dev/nullb0 -iodepth=128
  -thread -rw=read -ioengine=io_uring -direct=1 -bs=4k -size=100G -numjobs=1
  -time_based -runtime=120

before this patch:
Run status group 0 (all jobs):
   READ: bw=724MiB/s (759MB/s), 724MiB/s-724MiB/s (759MB/s-759MB/s),
   io=84.8GiB (91.1GB), run=120001-120001msec

With this patch:
Run status group 0 (all jobs):
   READ: bw=761MiB/s (798MB/s), 761MiB/s-761MiB/s (798MB/s-798MB/s),
   io=89.2GiB (95.8GB), run=120001-120001msec

About 5% improvement.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit c5b856255cbc3b664d686a83fa9397a835e063de upstream

We can assume that O_NONBLOCK is always honored, even if we don't
have a ->read/write_iter() for the file type. Also unify the read/write
checking for allowing async punt, having the write side factoring in the
REQ_F_NOWAIT flag as well.

Cc: stable@vger.kernel.org
Fixes: 490e89676a52 ("io_uring: only force async punt if poll based retry can't handle it")
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit f5fa38c59cb0b40633dee5cdf7465801be3e4928 upstream

io_uring is the only user of io-wq, and now it uses only io-wq callback
for all its requests, namely io_wq_submit_work(). Instead of storing
work->runner callback in each instance of io_wq_work, keep it in io-wq
itself.

pros:
- reduces io_wq_work size
- more robust -- ->func won't be invalidated with mem{cpy,set}(req)
- helps other work
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit d4c81f38522f3e7f4be1b472ef9988d0ed7f3696 upstream

Remove io_link_work_cb() -- the last custom work.func.
Not the prettiest thing, but works. Instead of queueing a linked timeout
in io_link_work_cb() mark a request with REQ_F_QUEUE_TIMEOUT and do
enqueueing based on the flag in io_wq_submit_work().
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit ac45abc0e2a8ed16ecc0eea039fe762ddfefbcad upstream

In preparation of getting rid of work.func, this removes almost all
custom instances of it, leaving only io_wq_submit_work() and
io_link_work_cb(). And the last one will be dealt later.

Nothing fancy, just routinely remove *_finish() function and inline
what's left. E.g. remove io_fsync_finish() + inline __io_fsync() into
io_fsync().

As no users of io_req_cancelled() are left, delete it as well. The patch
adds extra switch lookup on cold-ish path, but that's overweighted by
nice diffstat and other benefits of the following patches.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 3af73b286ccee493dc055fc58da02b2dc7a5304d upstream

Relying on having a specific work.func is dangerous, even if an opcode
handler set it itself. E.g. io_wq_assign_next() can modify it.

io_close() sets a custom work.func to indicate that
__close_fd_get_file() was already called. Fortunately, there is no bugs
with io_wq_assign_next() and close yet.

Still, do it safe and always be prepared to be called through
io_wq_submit_work(). Zero req->close.put_file in prep, and call
__close_fd_get_file() IFF it's NULL.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit a8c73c1a614f6da6c0b04c393f87447e28cb6de4 upstream

Use kvfree() to free the pages and vmas, since they are allocated by
kvmalloc_array() in a loop.

Fixes: d4ef647510b1 ("io_uring: avoid page allocation warnings")
Signed-off-by: NDenis Efremov <efremov@linux.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200605093203.40087-1-efremov@linux.comSigned-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit efe68c1ca8f49e8c06afd74b699411bfbb8ba1ff upstream

Account for the number of provided buffers when validating the address
range.
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit dddb3e26f6d88c5344d28cb5ff9d3d6fa05c4f7a upstream

We already have the buffer selected, but we should set the iter list
again.

Cc: stable@vger.kernel.org # v5.7
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit d2b6f48b691ed67569786c332f0173b918d3fd1b upstream

Fail recv/send in case of IORING_SETUP_IOPOLL earlier during prep,
so it'd be done only once. Removes duplication as well
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit ec65fea5a8d7a82d3137dd2a44197eb577da111f upstream

io_openat_prep() and io_openat2_prep() are identical except for how
struct open_how is built. Deduplicate it with a helper.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 25e72d1012b30bdff712b563e6141a4f311d28d6 upstream

build_open_how() is just adjusting open_flags/mode. Do it once during
prep. It looks better than storing raw values for the future.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 3232dd02af65f2d01be641120d2a710176b0c7a7 upstream

IORING_SETUP_IOPOLL is defined only for read/write, other opcodes should
be disallowed, otherwise it'll get an error as below. Also refuse
open/close with SQPOLL, as the polling thread wouldn't know which file
table to use.

RIP: 0010:io_iopoll_getevents+0x111/0x5a0
Call Trace:
 ? _raw_spin_unlock_irqrestore+0x24/0x40
 ? do_send_sig_info+0x64/0x90
 io_iopoll_reap_events.part.0+0x5e/0xa0
 io_ring_ctx_wait_and_kill+0x132/0x1c0
 io_uring_release+0x20/0x30
 __fput+0xcd/0x230
 ____fput+0xe/0x10
 task_work_run+0x67/0xa0
 do_exit+0x353/0xb10
 ? handle_mm_fault+0xd4/0x200
 ? syscall_trace_enter+0x18c/0x2c0
 do_group_exit+0x43/0xa0
 __x64_sys_exit_group+0x18/0x20
 do_syscall_64+0x60/0x1e0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
[axboe: allow provide/remove buffers and files update]
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit fd2206e4e97b5bae422d9f2f9ebbc79bc97e44a5 upstream

A previous commit enabled this functionality, which also enabled O_PATH
to work correctly with io_uring. But we can't safely close the ring
itself, as the file handle isn't reference counted inside
io_uring_enter(). Instead of jumping through hoops to enable ring
closure, add a "soft" ->needs_file option, ->needs_file_no_error. This
enables O_PATH file descriptors to work, but still catches the case of
trying to close the ring itself.
Reported-by: NJann Horn <jannh@google.com>
Fixes: 904fbcb115c8 ("io_uring: remove 'fd is io_uring' from close path")
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 7b53d59859bc932b37895d2d37388e7fa29af7a5 upstream

Overflowed requests in io_uring_cancel_files() should be shed only of
inflight and overflowed refs. All other left references are owned by
someone else.

If refcount_sub_and_test() fails, it will go further and put put extra
ref, don't do that. Also, don't need to do io_wq_cancel_work()
for overflowed reqs, they will be let go shortly anyway.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit bfe68a221905de37e65394a6d58c1e5f3e545d2f upstream

Offset timeouts wait not for sqe->off non-timeout CQEs, but rather
sqe->off + number of prior inflight requests. Wait exactly for
sqe->off non-timeout completions
Reported-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 360428f8c0cd857006a8a3f515946285370489ac upstream

Separate flushing offset timeouts io_commit_cqring() by moving it into a
helper. Just a preparation, makes following patches clearer.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit e62753e4e2926f249d088cc0517be5ed4efec6d6 upstream

Calling statx directly both simplifies the interface and avoids potential
incompatibilities between sync and async invokations.
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 1d9e1288039a47dc1189c3c1fed5cf3c215e94b7 upstream

Separate statx data from open in io_kiocb. No functional changes.
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 0bf0eefdab52d9f9f3a1eeda32a4fc7afe4e9219 upstream

io_close() was punting async manually to skip grabbing files. Use
REQ_F_NO_FILE_TABLE instead, and pass it through the generic path
with -EAGAIN.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 0451894522108d6c72934aff6ef89023743a9ed4 upstream

io_commit_cqring() assembly doesn't look good with extra code handling
drained requests. IOSQE_IO_DRAIN is slow and discouraged to be used in
a hot path, so try to minimise its impact by putting it into a helper
and doing a fast check.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 56080b02ed6e71fbc0add2d05a32ed7361dd736a upstream

SQEs are user writable, don't read sqe->off twice in io_timeout_prep()
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 733f5c95e6fdabd05b8dfc15e04512809c9652c2 upstream

Move spin_lock_irq() earlier to have only 1 call site of it in
io_timeout(). It makes the flow easier.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 4518a3cc273cf82efdd36522fb1f13baad173c70 upstream

In io_uring_cancel_files(), after refcount_sub_and_test() leaves 0
req->refs, it calls io_put_req(), which would also put a ref. Call
io_free_req() instead.

Cc: stable@vger.kernel.org
Fixes: 2ca10259b418 ("io_uring: prune request from overflow list on flush")
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 6b668c9b7fc6fc0c313cdaee8b75d17f4d954ab5 upstream

When IORING_SETUP_SQPOLL is enabled, io_ring_ctx_wait_and_kill() will wait
for sq thread to idle by busy loop:

    while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
        cond_resched();

Above loop isn't very CPU friendly, it may introduce a short cpu burst on
the current cpu.

If ctx->refs is dying, we forbid sq_thread from submitting any further
SQEs. Instead they just get discarded when we exit.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 0cdaf760f42eb8e8a714c1cc017423e5da6d4936 upstream

A submission is "async" IIF it's done by SQPOLL thread. Instead of
passing @async flag into io_submit_sqes(), deduce it from ctx->flags.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit f2a8d5c7a218b9c24befb756c4eb30aa550ce822 upstream

Add IORING_OP_TEE implementing tee(2) support. Almost identical to
splice bits, but without offsets.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit c11368a57be460de889696f6ff8815fbcacf4db2 upstream

req->flags stores all sqe->flags. After checking that sqe->flags are
valid set if IOSQE* flags, no need to double check it, just forward them
all.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 9f13c35b33fddb186beab9ef21c555a01e45f4d7 upstream

io_file_put() deals with flushing state's file refs, adding "state" to
its name makes it a bit clearer. Also, avoid double check of
state->file in __io_file_get() in some cases.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 3bfa5bcb26f0b52d7ae8416aa0618fff21aceaaf upstream

We only need apoll in the one section, do the juggling with the work
restoration there. This removes a special case further down as well.

No functional changes in this patch.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>