- 06 9月, 2014 2 次提交
-
-
由 Sabrina Dubroca 提交于
Calling setsockopt with IPV6_JOIN_ANYCAST or IPV6_LEAVE_ANYCAST triggers the assertion in addrconf_join_solict()/addrconf_leave_solict() ipv6_sock_ac_join(), ipv6_sock_ac_drop(), ipv6_sock_ac_close() need to take RTNL before calling ipv6_dev_ac_inc/dec. Same thing with ipv6_sock_mc_join(), ipv6_sock_mc_drop(), ipv6_sock_mc_close() before calling ipv6_dev_mc_inc/dec. This patch moves ASSERT_RTNL() up a level in the call stack. Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Reported-by: NTommi Rantala <tt.rantala@gmail.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy King 提交于
We should check if the map of the table actually succeeds, and also free resources accordingly. Version bumped to 1.2.1.0 Acked-by: NShelley Gong <shelleygong@vmware.com> Acked-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NAndy King <acking@vmware.com> Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 9月, 2014 1 次提交
-
-
由 Li RongQing 提交于
distinguish between the dropped and consumed skb, not assume the skb is consumed always Cc: Thomas Graf <tgraf@noironetworks.com> Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 9月, 2014 10 次提交
-
-
由 Lendacky, Thomas 提交于
During allocation and initialization of the network driver structures, the wrong pointer is used to initialize a spin lock. Fix the spin lock initialization by using the proper pointer. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
The user_skb maybe be leaked if the operation on it failed and codes skipped into the label "out:" without calling genlmsg_unicast. Cc: Pravin Shelar <pshelar@nicira.com> Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira 提交于
make defconfig reports: warning: (NETFILTER_XT_TARGET_LOG) selects NF_LOG_IPV6 which has unmet direct dependencies (NET && INET && IPV6 && NETFILTER && NETFILTER_ADVANCED) Fixes: d79a61d6 netfilter: NETFILTER_XT_TARGET_LOG selects NF_LOG_* Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== pull request: Netfilter/IPVS fixes for net The following patchset contains seven Netfilter fixes for your net tree, they are: 1) Make the NAT infrastructure independent of x_tables, some users are already starting to test nf_tables with NAT without enabling x_tables. Without this patch for Kconfig, there's a superfluous dependency between NAT and x_tables. 2) Allow to use 0 in the cgroup match, the kernel rejects with -EINVAL with no good reason. From Daniel Borkmann. 3) Select CONFIG_NF_NAT from the nf_tables NAT expression, this also resolves another NAT dependency with x_tables. 4) Use HAVE_JUMP_LABEL instead of CONFIG_JUMP_LABEL in the Netfilter hook code as elsewhere in the kernel to resolve toolchain problems, from Zhouyi Zhou. 5) Use iptunnel_handle_offloads() to set up tunnel encapsulation depending on the offload capabilities, reported by Alex Gartrell patch from Julian Anastasov. 6) Fix wrong family when registering the ip_vs_local_reply6() hook, also from Julian. 7) Select the NF_LOG_* symbols from NETFILTER_XT_TARGET_LOG. Rafał Miłecki reported that when jumping from 3.16 to 3.17-rc, his log target is not selected anymore due to changes in the previous development cycle to accomodate the full logging support for nf_tables. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
Some hosts can be both little and big endian. In certain scenarios a big endian kernel can kexec a little endian kernel. This patch fixes this case from both ends: 1) Return endianity to original values on shutdown (in case little endian kernel boots after we shutdown). 2) Do not rely on HW reset values when loading driver in little endian kernel but configure them explicitly (in case previous kernel was big endian and did not reset the HW). Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugene Crosser 提交于
When qeth device is queried for ethtool data, hardware operation is performed to extract the necessary information from the card. If the card is not online at the moment (e.g. it is undergoing recovery), this operation produces undesired effects like temporarily freezing the system. This patch prevents execution of the hardware query operation when the card is not online. In such case, ioctl() operation returns error with errno ENODEV. Reviewed-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NEugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Calxeda 1G/10G XGMAC Ethernet support should be available only on Calxeda ECX-1000/2000 (Highbank/Midway) platforms. Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Renesas SuperH Ethernet support should be available only on Renesas ARM SoCs and SuperH architecture. Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roland Stigge 提交于
When a link is already up, the following sequence makes the kernel block completely: ip link set dev eth0 down ip link set dev eth0 up This is because on suspended phy, the following lines __lpc_eth_reset(pldat); __lpc_eth_init(pldat); make the LPC ethernet core block (see LPC32x0 manual). The PHY needs to be (re-)activated low-level first. Signed-off-by: NRoland Stigge <stigge@antcom.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
The patch fixes race conditions between PCI error recovery callbacks and potential ifup/ifdown. First, if ifup (tg3_open) is called between tg3_io_error_detected() and tg3_io_resume() then tp->timer is armed twice before expiry. Once during tg3_open() and again during tg3_io_resume(). This results in BUG at kernel/time/timer.c:945. Second, if ifdown (tg3_close) is called between tg3_io_error_detected() and tg3_io_resume() then tg3_napi_disable() is called twice without a tg3_napi_enable between. Once during tg3_io_error_detected() and again during tg3_close(). The tg3_io_resume() then hangs on rtnl_lock(). v2: Added logging messages per Prashant's request Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: NIvan Vecera <ivecera@redhat.com> Acked-by: NPrashant Sreedharan <prashant@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 9月, 2014 16 次提交
-
-
由 David S. Miller 提交于
Hariprasad Shenai says: ==================== Trivial fixes for cxgb4 This patch series adds support to fix T5 adapter accessing T4 adapter registers, issue mbox command on correct mbox for physical function, avoid dumping write only registers, use correct length for adapter part number and support to detect and display firmware reported errors. The patches series is created against 'net' tree. And includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. Thanks V2: Added description for each patch as per David Miller's comment ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
A couple of RDMA-related called to t4_query_params() were issuing mbox commands on mbox0 instead of mbox4. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Avoid dumping MPS_RPLC_MAP_CTL for reg dumps; this is a Write-Only register. Reading this register may cause MPS TCAM corruption. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
The adapter firmware can indicate error conditions to the host. If the firmware has indicated an error, print out the reason for the firmware error. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Fixes few register access for both T4 and T5. PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS & PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS is T4 only register don't let T5 access them. For T5 MA_PARITY_ERROR_STATUS2 is additionally read. MPS_TRC_RSS_CONTROL is T4 only register, for T5 use MPS_T5_TRC_RSS_CONTROL. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
Previously it was using the length value of serial number. Also added macro for VPD unique identifier (0x82). Signed-off-by: NCasey Leedom <leedom@chelsio.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
We previously assumed that a Port's Capabilities and Advertised Capabilities would never change from Port Initialization time. This is no longer true when we can have 10Gb/s and 1Gb/s SFP+ Transceiver Modules randomly swapped. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
In case of the HW is not able to do the receive checksum offloading the only feature to remove is NETIF_F_RXCSUM. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
For new GMACs it is possible to turn-on/off the COE. In the current driver, when disabled the Rx-checksum via ethtool, the tool reported that csum was disabled but the HW continued to set the IPC. Indeed this is because the fix_features allows this. So the patch fixes this problem by adding the set_features. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver fixes 2014-08-29 The following series of patches includes fixes to the driver. - Tx hardware queue flushing support dependent on hardware version - Incorrect reported fifo size - Proper mmd select in XPCS debugfs support - Proper queue count for configuring Tx flow control This patch series is based on net. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
When configuring Tx flow control the Rx queue count was used instead of the Tx queue count for looping through the Tx hardware queues. Fix the code to use the Tx queue count. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
The debugfs support for the xpcs registers did not properly use the specified mmd (xpcs_mmd entry) which resulted in the default mmd value always being used. Update the debugfs support to generate the proper mmd register value. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
The fifo size reported by the hardware is not correct. Add support to limit the reported size to what is actually present. Also, fix the argument types used in the fifo size calculation function. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
The flushing of the Tx hardware queues is only supported at a certain level of the hardware. Retrieve the current version of the hardware and use that to determine if flushing is supported. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Geert Uytterhoeven 提交于
If NO_DMA=y: drivers/built-in.o: In function `xgene_enet_delete_ring': xgene_enet_main.c:(.text+0x28755a): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `xgene_enet_setup_tx_desc': xgene_enet_main.c:(.text+0x287774): undefined reference to `dma_map_single' xgene_enet_main.c:(.text+0x287780): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `xgene_enet_tx_completion': xgene_enet_main.c:(.text+0x2878e6): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `xgene_enet_refill_bufpool': xgene_enet_main.c:(.text+0x2879d4): undefined reference to `dma_map_single' xgene_enet_main.c:(.text+0x2879e0): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `xgene_enet_rx_frame': xgene_enet_main.c:(.text+0x287aaa): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `xgene_enet_free_desc_ring': xgene_enet_main.c:(.text+0x287f98): undefined reference to `dma_free_coherent' drivers/built-in.o: In function `xgene_enet_create_desc_ring': xgene_enet_main.c:(.text+0x28808e): undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `xgene_enet_probe': xgene_enet_main.c:(.text+0x2883d4): undefined reference to `dma_set_mask' xgene_enet_main.c:(.text+0x2883ec): undefined reference to `dma_supported' Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless由 David S. Miller 提交于
John W. Linville says: ==================== pull request: wireless 2014-08-28 Please pull this batch of fixes intended for the 3.17 stream. For the Bluetooth/6LowPAN/802.15.4 bits, Johan says: 'It contains a connection reference counting fix for LE where a connection might stay up even though it should get disconnected. The other 802.15.4 6LoWPAN related patches were sent to the bluetooth tree by Alexander Aring and described as follows by him: " these patches contains patches for the bluetooth branch. This series includes memory leak fixes and an errno value fix. Also there are two patches for sending and receiving 1280 6LoWPAN packets, which makes the IEEE 802.15.4 6LoWPAN stack more RFC compliant. "' Along with that... Alexey Khoroshilov fixes a use-after-free bug on at76c50x-usb. Hauke Mehrtens adds a PCI ID to bcma. Himangi Saraogi fixes a silly "A || A" test in rtlwifi. Larry Finger adds a device ID to rtl8192cu. Maks Naumov fixes a strncmp argument in ath9k. Álvaro Fernández Rojas adds a PCI ID to ssb. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 9月, 2014 6 次提交
-
-
由 Pablo Neira Ayuso 提交于
CONFIG_NETFILTER_XT_TARGET_LOG is not selected anymore when jumping from 3.16 to 3.17-rc1 if you don't set on the new NF_LOG_IPV4 and NF_LOG_IPV6 switches. Change this to select the three new symbols NF_LOG_COMMON, NF_LOG_IPV4 and NF_LOG_IPV6 instead, so NETFILTER_XT_TARGET_LOG remains enabled when moving from old to new kernels. Reported-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 David S. Miller 提交于
Giuseppe Cavallaro says: ==================== stmmac EEE fixes This is a subset of patches to provide some fixes for the EEE support inside the driver. Patches have been tested on boards EEE capable plugged on switch w/ w/o EEE support. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
In case of PLS is active the PLS (PHY Link Status) bit in the Reg12 has to be set to allow the MAC to asserts the LPI pattern when the link is ok. Signed-off-by: Nnandini sharma <nandini.sharma@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch is to skip the EEE initialisation when the stmmac is using a switch (with a fixed phy support). Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 nandini sharma 提交于
The value for LPI TW timer has to be updated to 0x1E that is the hardcoded value of 20.5us and it will apply to all EEE enabled Remote PHYs. Disadvantage is for PHY's that support lesser wakeup time but we can accept it waiting to implement LLDP to negotiate the Wakeup time of Remote PHY. Signed-off-by: Nnandini sharma <nandini.sharma@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 nandini sharma 提交于
This patch is to fix the definition of macros for EEE otherwise the LPI TX/RX entry/exit cannot be properly managed. Signed-off-by: NNandini Sharma <nandini.sharma@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2014 5 次提交
-
-
由 Daniel Borkmann 提交于
Since SCTP day 1, that is, 19b55a2af145 ("Initial commit") from lksctp tree, the official <netinet/sctp.h> header carries a copy of enum sctp_sstat_state that looks like (compared to the current in-kernel enumeration): User definition: Kernel definition: enum sctp_sstat_state { typedef enum { SCTP_EMPTY = 0, <removed> SCTP_CLOSED = 1, SCTP_STATE_CLOSED = 0, SCTP_COOKIE_WAIT = 2, SCTP_STATE_COOKIE_WAIT = 1, SCTP_COOKIE_ECHOED = 3, SCTP_STATE_COOKIE_ECHOED = 2, SCTP_ESTABLISHED = 4, SCTP_STATE_ESTABLISHED = 3, SCTP_SHUTDOWN_PENDING = 5, SCTP_STATE_SHUTDOWN_PENDING = 4, SCTP_SHUTDOWN_SENT = 6, SCTP_STATE_SHUTDOWN_SENT = 5, SCTP_SHUTDOWN_RECEIVED = 7, SCTP_STATE_SHUTDOWN_RECEIVED = 6, SCTP_SHUTDOWN_ACK_SENT = 8, SCTP_STATE_SHUTDOWN_ACK_SENT = 7, }; } sctp_state_t; This header was later on also placed into the uapi, so that user space programs can compile without having <netinet/sctp.h>, but the shipped with <linux/sctp.h> instead. While RFC6458 under 8.2.1.Association Status (SCTP_STATUS) says that sstat_state can range from SCTP_CLOSED to SCTP_SHUTDOWN_ACK_SENT, we nevertheless have a what it appears to be dummy SCTP_EMPTY state from the very early days. While it seems to do just nothing, commit 0b8f9e25 ("sctp: remove completely unsed EMPTY state") did the right thing and removed this dead code. That however, causes an off-by-one when the user asks the SCTP stack via SCTP_STATUS API and checks for the current socket state thus yielding possibly undefined behaviour in applications as they expect the kernel to tell the right thing. The enumeration had to be changed however as based on the current socket state, we access a function pointer lookup-table through this. Therefore, I think the best way to deal with this is just to add a helper function sctp_assoc_to_state() to encapsulate the off-by-one quirk. Reported-by: NTristan Su <sooqing@gmail.com> Fixes: 0b8f9e25 ("sctp: remove completely unsed EMPTY state") Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In commit ed98df33 ("net: use __GFP_NORETRY for high order allocations") we tried to address one issue caused by order-3 allocations. We still observe high latencies and system overhead in situations where compaction is not successful. Instead of trying order-3, order-2, and order-1, do a single order-3 best effort and immediately fallback to plain order-0. This mimics slub strategy to fallback to slab min order if the high order allocation used for performance failed. Order-3 allocations give a performance boost only if they can be done without recurring and expensive memory scan. Quoting David : The page allocator relies on synchronous (sync light) memory compaction after direct reclaim for allocations that don't retry and deferred compaction doesn't work with this strategy because the allocation order is always decreasing from the previous failed attempt. This means sync light compaction will always be encountered if memory cannot be defragmented or reclaimed several times during the skb_page_frag_refill() iteration. Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Or Gerlitz says: ==================== Setup mlx4 user space Ethernet QPs to properly handle VXLAN This short series fixes the mlx4 driver setting of user space Ethernet QPs (e.g those opened by DPDK applications) such that they will properly handle VXLAN traffic/offloads ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Raw Ethernet QPs opened from user-space lack the proper setup to recieve/handle VXLAN traffic when VXLAN offloads are enabled. Fix that by adding a tunnel steering rule on top of the normal unicast steering rule and set the tunnel_type field in the QP context. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Move the function which we use to set VXLAN DMFS (flow-steering) rules from mlx4_en to mlx4_core. This refactoring will allow the mlx4_ib driver to call the helper for the use case of user-space RAW Ethernet QPs, such that they can serve VXLAN traffic too. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-