- 10 1月, 2006 2 次提交
-
-
由 Sam Ravnborg 提交于
In kbuild the file named 'Kbuild' has precedence over the file named Makefile. Utilise a file named Kbuild to include the 2.6 Makefile for xfs - since the xfs people likes to keep their arch specific Makefiles separate. With this patch xfs does no longer rely on the KERNELRELEASE components to be global. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 H. Peter Anvin 提交于
This removes the dependency from vmlinux to install, thus avoiding the current situation where "make install" has a nasty tendency to leave root-turds in the working directory. It also updates x86-64 to be in sync with i386. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 09 1月, 2006 8 次提交
-
-
由 Sam Ravnborg 提交于
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
This was causing some ordering problems. Remove the up-front evaluation and just revaluate the compiler version each time we need it. (The up-front evaluation was problematic because some architectures modify the value of $(CC)). Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Dave Jones 提交于
Error: ./fs/quota_v2.o .opd refers to 0000000000000020 R_PPC64_ADDR64 .exit.text Been carrying this for some time in Red Hat trees. Keith Ownes <kaos@sgi.com> commented: For our future {in}sanity, add a comment that this is the ppc .opd section, not the ia64 .opd section. ia64 .opd should not point to discarded sections. Any idea why ppc .opd points to discarded sections when ia64 does not? AFAICT no ia64 object has a useful .opd section, they are all empty or (sometimes) a dummy entry which is 1 byte long. ia64 .opd data is built at link time, not compile time. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Tore Anderson 提交于
If the final linking of vmlinux fails, the file .old_version are left behind. This patch ensures the mrproper target will remove it if present. Signed-off-by: NTore Anderson <tore@fud.no> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Ryan Anderson 提交于
When building Debian packages directly from the git tree, the appended "git_dirty" is a problem due to the underscore. In order to cause the least problems, change that just to "dirty". Signed-off-by: NRyan Anderson <ryan@michonline.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Brian Gerst 提交于
SND_MAX should be FF_MAX Signed-off-by: NBrian Gerst <bgerst@didntduck.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Brian Gerst 提交于
- Move mkdir out of cmd_offsets - Add input file to sed command instead of using cat Signed-off-by: NBrian Gerst <bgerst@didntduck.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Cleaning up the lxdialog Makefile by factoring out the ncurses compatibility checks. This made the checks much more obvious and easier to extend. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 07 1月, 2006 6 次提交
-
-
由 Sam Ravnborg 提交于
This makes things a little bit more reader friendly and gvim is less confused. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Adrian Bunk 提交于
This patch fixed "make gconfig" with POSIXLY_CORRECT=1 set. This issue was reported by Jens Elkner <elkner@linofee.org> in kernel Bugzilla #2919. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Now when kbuild passes KBUILD_MODNAME with "" do not __stringify it when used. Remove __stringnify for all users. This also fixes the output of: $ ls -l /sys/module/ drwxr-xr-x 4 root root 0 2006-01-05 14:24 pcmcia drwxr-xr-x 4 root root 0 2006-01-05 14:24 pcmcia_core drwxr-xr-x 3 root root 0 2006-01-05 14:24 "processor" drwxr-xr-x 3 root root 0 2006-01-05 14:24 "psmouse" The quoting of the module names will be gone again. Thanks to GregKH + Kay Sievers for reproting this. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Brian Gerst 提交于
Many arches make shared objects for VDSOs. Generally exclude them. Signed-off-by: NBrian Gerst <bgerst@didntduck.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Rene Scharfe 提交于
Currently scripts/setlocalversion is a Perl script that tries to figure out the current git commit ID of a repo without using git. It also imports Digest::MD5 without using it and generally is too big for the small task it does. :] And it always reports a git ID, even when the HEAD is tagged -- this is a bug. This patch replaces it with a Bourne Shell script that uses git commands to do the same. I can't come up with a scenario where someone would use a git repo and refuse to install git core at the same time, so I think it's reasonable to assume git is available. The new script also reports uncommitted changes by adding -git_dirty to the version string. Obviously you can't see from that _what_ has been changed from the last commit, so it's more of a reminder that you forgot to commit something. The script is easily extensible: simply add a check for Mercurial (or whatever) below the git check. Note: the script doesn't print a newline char anymore. That's only because it was easier to implement it that way, not a feature (or bug). 'make kernelrelease' doesn't care. Signed-off-by: NRene Scharfe <rene.scharfe@lsrfire.ath.cx> Acked-by: NRyan Anderson <ryan@michonline.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Update modules.txt with info how to build external modules with files in several directories. The question popped up on lkml often enough to warrant this, let's see if people read this stuff - or google hits it. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 06 1月, 2006 24 次提交
-
-
由 Chuck Ebbert 提交于
Setting RF (resume flag) allows a debugger to resume execution after a code breakpoint without tripping the breakpoint again. It is reset by the CPU after execution of one instruction. Requested by Stephane Eranian: "I am trying to the user HW debug registers on i386 and I am running into a problem with ptrace() not allowing access to EFLAGS_RF for POKEUSER (see FLAG_MASK). [ ... ] It avoids the need to remove the breakpoint, single step, and reinstall. The equivalent functionality exists on IA-64 and is allowed by ptrace()" Cc: Stephane Eranian <eranian@hpl.hp.com> Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
-
由 Jody McIntyre 提交于
-
由 Kris Katterjohn 提交于
These patches add the header linux/if_ether.h and change 1500 to ETH_DATA_LEN in some files. Signed-off-by: NKris Katterjohn <kjak@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Morton 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Purdie 提交于
Add some PCMCIA device IDs for the microdrive found in the Sharp Zaurus and a different revision of the Socket CF+ Bluetooth card. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Daniel Ritz 提交于
kill the socket_shutdown()/shutdown_socket() confusion by making it one single function. move cs_socket_put() in there. nicer to read and smaller: original: text data bss dec hex filename 25181 1076 32 26289 66b1 drivers/pcmcia/pcmcia_core.ko patched: text data bss dec hex filename 24973 1076 32 26081 65e1 drivers/pcmcia/pcmcia_core.ko Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Convert users of kmalloc and memset to kzalloc Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Do not wildly probe the IO ports we're trying to use on PARISC. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Export the stored values instead of re-reading everything in the socket information sysfs files, and make them accessible to all users, not only to root. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Vitaly Bordug 提交于
This adds PCMCIA support for both MPC885ADS and MPC866ADS. This is established not together with FADS, because 885 does not have io_block_mapping() for BCSR area. Also, some cleanups done both for 885ADS and MBX. Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Vitaly Bordug 提交于
This fixes misconfiguration that could result in odd work of some old CF cards. Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Some PCMCIA sockets have statically mapped memory windows, but dynamically mapped IO windows. Using the "nonstatic" socket library is inpractical for them, as they do neither need a resource database (as we can trust the kernel resource database on m68k and ppc) nor lots of other features of that library. Let them get a small "iodyn" socket library (105 lines of code) instead. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Update the PCMCIA sound drivers to handle the recent changes to the PCMCIA core. A part of this merge was done by Takashi Iwai <tiwai@suse.de>. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
The linked list of devices managed by each PCMCIA driver is, in very most cases, unused. Therefore, remove it from many drivers. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Remove the old "detach" mechanism as it is unused now. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Merge the suspend and resume methods for 16-bit PCMCIA cards into the device model -- for both runtime power management and suspend to ram/disk. Bugfix in ds.c by Richard Purdie Signed-Off-By: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Daniel Ritz 提交于
Make the bridge specific initialization code config options depending on CONFIG_EMBEDDED. Config options for TI/EnE, Toshiba, Ricoh and O2Micro are available. Disabling all of the specific tweaks cuts off more than half of yenta_socket.ko. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-