Generic DPI panel driver includes the driver and 4 similar panel configurations. It
will match the panel name which is passed from platform data and setup the
right configurations.

With generic DPI panel driver, we can remove those 4 duplicated panel display
drivers. In the future, it is simple for us just add new panel configuration
date in panel-generic-dpi.c to support new display panel.
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>
Acked-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>

A null pointer check added. And using kstrdup()
instead of kmalloc() & strcpy()
Signed-off-by: NSamreen <samreen@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>

Enable Display on zoom2, zoom3 and 3630sdp boards.
Signed-off-by: NMukund Mittal <mmittal@ti.com>
Signed-off-by: NKishore Y <kishore.y@ti.com>
Signed-off-by: NSamreen <samreen@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>

Board-zoom-display.c added as a common file for display functionality
on boards zoom2, zoom3 and 3630sdp.
Signed-off-by: NMukund Mittal <mmittal@ti.com>
Signed-off-by: NKishore Y <kishore.y@ti.com>
Signed-off-by: NRajkumar N <rajkumar.nagarajan@ti.com>
Signed-off-by: NSamreen <samreen@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>

NEC WVGA LCD NL8048HL11-01B panel support has been added.
This panel is being used in zoom2/zoom3/3630 sdp boards.
Signed-off-by: NMukund Mittal <mmittal@ti.com>
Signed-off-by: NRajkumar N <rajkumar.nagarajan@ti.com>
Signed-off-by: NSamreen <samreen@ti.com>
CC: Subbu Venkatesh <subramani.venkatesh@windriver.com>
CC: Erik Gilling <konkers@android.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>

Enable dss to process color formats with pre-mulitplied alpha.
With this we can have alpha values defined for each pixel
and hence can have different blending values for each pixel.
sysfs entry has been created for this and pre-multiplied alpha
support is turned off by default.
Signed-off-by: NSudeep Basavaraj <sudeep.basavaraj@ti.com>
Signed-off-by: NRajkumar N <rajkumar.nagarajan@ti.com>
Signed-off-by: NSamreen <samreen@ti.com>
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>

Splitting the OMAP3 dss has feature separately for
omap3430 & omap3630
Signed-off-by: NSamreen <samreen@ti.com>
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>

Read correct DISPC_CONFIG bit when the channel is DIGIT, remove extra line
at the end of the function.
Signed-off-by: NArchit Taneja <archit@ti.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits)
  omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  OMAP4: hwmod data: Fix alignment and end of line in structurefields
  OMAP4: hwmod data: Move the DMA structures
  OMAP4: hwmod data: Move the smartreflex structures
  OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc
  arm: omap: tusb6010: add name for MUSB IRQ
  arm: omap: craneboard: Add USB EHCI support
  omap2+: Initialize serial port for dynamic remuxing for n8x0
  omap2+: Add struct omap_board_data and use it for platform level serial init
  omap2+: Allow hwmod state changes to mux pads based on the state changes
  omap2+: Add support for hwmod specific muxing of devices
  omap2+: Add omap_mux_get_by_name
  OMAP2: PM: fix compile error when !CONFIG_SUSPEND
  MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership
  OMAP4: Smartreflex framework extensions
  OMAP4: hwmod: Add inital data for smartreflex modules.
  OMAP4: PM: Program correct init voltages for scalable VDDs
  OMAP4: Adding voltage driver support
  OMAP4: Register voltage PMIC parameters with the voltage layer
  OMAP3: PM: Program correct init voltages for VDD1 and VDD2
  ...

Fix up trivial conflict in arch/arm/plat-omap/Kconfig

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (255 commits)
  [media] radio-aimslab.c: Fix gcc 4.5+ bug
  [media] cx25821: Fix compilation breakage due to BKL dependency
  [media] v4l2-compat-ioctl32: fix compile warning
  [media] zoran: fix compiler warning
  [media] tda18218: fix compile warning
  [media] ngene: fix compile warning
  [media] DVB: IR support for TechnoTrend CT-3650
  [media] cx23885, cimax2.c: Fix case of two CAM insertion irq
  [media] ir-nec-decoder: fix repeat key issue
  [media] staging: se401 depends on USB
  [media] staging: usbvideo/vicam depends on USB
  [media] soc_camera: Add the ability to bind regulators to soc_camedra devices
  [media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV2640 sensor
  [media] v4l: soc-camera: switch to .unlocked_ioctl
  [media] v4l: ov772x: simplify pointer dereference
  [media] ov9640: fix OmniVision OV9640 sensor driver's priv data retrieving
  [media] ov9640: use macro to request OmniVision OV9640 sensor private data
  [media] ivtv-i2c: Fix two warnings
  [media] staging/lirc: Update lirc TODO files
  [media] cx88: Remove the obsolete i2c_adapter.id field
  ...

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits)
  ARM: DMA: add support for DMA debugging
  ARM: PL011: add DMA burst threshold support for ST variants
  ARM: PL011: Add support for transmit DMA
  ARM: PL011: Ensure IRQs are disabled in UART interrupt handler
  ARM: PL011: Separate hardware FIFO size from TTY FIFO size
  ARM: PL011: Allow better handling of vendor data
  ARM: PL011: Ensure error flags are clear at startup
  ARM: PL011: include revision number in boot-time port printk
  ARM: vexpress: add sched_clock() for Versatile Express
  ARM i.MX53: Make MX53 EVK bootable
  ARM i.MX53: Some bug fix about MX53 MSL code
  ARM: 6607/1: sa1100: Update platform device registration
  ARM: 6606/1: sa1100: Fix platform device registration
  ARM i.MX51: rename IPU irqs
  ARM i.MX51: Add ipu clock support
  ARM: imx/mx27_3ds: Add PMIC support
  ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn()
  mx51: fix usb clock support
  MX51: Add support for usb host 2
  arch/arm/plat-mxc/ehci.c: fix errors/typos
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (25 commits)
  atyfb: Fix bootup hangs on sparc64.
  sparc: update copyright in piggyback.c
  sparc: unify strip command in boot/Makefile
  sparc: rename piggyback_32 to piggyback
  sparc: fix tftpboot.img for sparc64 on little-endian host
  sparc: add $BITS to piggyback arguments
  sparc: remove obsolete ELF support in piggyback_32.c
  sparc: additional comments to piggyback_32.c
  sparc: use _start for the start entry (like 64 bit does)
  sparc: use trapbase in setup_arch
  sparc: refactor piggy_32.c
  Added support for ampopts in APBUART driver. Used in AMP systems.
  APBUART: added raw AMBA vendor/device number to match against.
  SPARC/LEON: avoid AMBAPP name duplicates in openprom fs when REG is missing
  SPARC/LEON: added support for selecting Timer Core and Timer within core
  LEON: added raw AMBA vendor/device number to find TIMER, IRQCTRL
  SPARC/LEON: added support for IRQAMP IRQ Controller
  SPARC/LEON: find IRQCTRL and Timer via OF-Tree, instead of hardcoded.
  sparc: fix sparse warnings in arch/sparc/prom for 32 bit build
  sparc: remove unused prom tree functions
  ...

Conflicts:
	arch/arm/mach-pxa/clock.c
	arch/arm/mach-pxa/clock.h

Conflicts:
	arch/arm/Kconfig
	arch/arm/common/Makefile
	arch/arm/kernel/Makefile
	arch/arm/kernel/smp.c

Conflicts:
	arch/arm/kernel/entry-armv.S
	arch/arm/mm/ioremap.c

Add ARM support for the DMA debug infrastructure, which allows the
DMA API usage to be debugged.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msm: (35 commits)
  mmc: msm_sdcc: Check for only DATA_END interrupt to end a request
  mmc: msm_sdcc: Fix bug in PIO mode when data size is not word aligned
  mmc: msm_sdcc: Reset SDCC in case of data transfer errors
  mmc: msm_sdcc: Add prog done interrupt support
  mmc: msm_sdcc: Fix possible circular locking dependency warning
  MSM: Add USB support for MSM7x30
  MSM: Add USB suport for QSD8x50
  msm: initial framebuffer support
  msm: add handling for clocks tagged as CLK_MINMAX
  msm: trout: change name of pmdh_clk to mddi_clk
  msm: add CLK_MINMAX to pmdh_clk
  msm: trout: add gpio_to_irq
  msm: iommu: Use the correct memory allocation flag
  msm_serial: Remove redundant unlikely()
  msm: iommu: Miscellaneous code cleanup
  msm: iommu: Support cache-coherent memory access
  msm: iommu: Definitions for extended memory attributes
  msm: iommu: Kconfig dependency for the IOMMU API
  msm: iommu: Check if device is already attached
  msm: iommu: Kconfig item for cacheable page tables
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (55 commits)
  video: udlfb: Kill off special printk wrappers, use pr_fmt().
  video: udlfb: Kill off some magic constants for EDID sizing.
  video: udlfb: deifdefify (yes, that's a word).
  fbdev: modedb: Add a new mode for 864x480 TAAL panels.
  drivers/video/i810/i810-i2c.c: fix i2c bus handling
  video: Fix the HGA framebuffer driver
  drivers/video/carminefb.c: improve error handling
  video: imxfb: Fix the maximum value for yres
  fbdev: sh_mobile_lcdcfb: Enable 32 bpp and 24 bpp support
  fbdev: sh_mipi_dsi: use platform provided register layout and values
  ARM: mach-shmobile: specify sh7372 MIPI DSI register layout
  fbdev: sh_mipi_dsi: support different register layouts
  ARM: mach-shmobile: improve MIPI DSI clock configuration
  fbdev: sh-mobile: implement MIPI DSI runtime PM support
  sisfb: eliminate compiler warnings
  sisfb: delete unused register I/O macros
  sisfb: replace setSISIDXREG with SiS_SetRegANDOR
  sisfb: replace andSISIDXREG with SiS_SetRegAND
  sisfb: replace orSISIDXREG with SiS_SetRegOR
  sisfb: replace outSISIDXREG with SiS_SetReg
  ...

* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: include Migo-R TS driver in Migo-R defconfig
  sh: correct definitions to access stack pointers
  sh: Tidy up SH-4A unaligned load support.
  dma: shdma: NMI support.
  sh: mach-sdk7786: Handle baseboard NMI source selection.
  sh: mach-rsk: Add polled GPIO buttons support for RSK+7203.
  sh: Break out cpuinfo_op procfs bits.
  sh: Enable optional gpiolib for all CPUs with pinmux tables.
  sh: migrate SH_CLK_MD to mode pin API.
  sh: machvec IO death.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1436 commits)
  cassini: Use local-mac-address prom property for Cassini MAC address
  net: remove the duplicate #ifdef __KERNEL__
  net: bridge: check the length of skb after nf_bridge_maybe_copy_header()
  netconsole: clarify stopping message
  netconsole: don't announce stopping if nothing happened
  cnic: Fix the type field in SPQ messages
  netfilter: fix export secctx error handling
  netfilter: fix the race when initializing nf_ct_expect_hash_rnd
  ipv4: IP defragmentation must be ECN aware
  net: r6040: Return proper error for r6040_init_one
  dcb: use after free in dcb_flushapp()
  dcb: unlock on error in dcbnl_ieee_get()
  net: ixp4xx_eth: Return proper error for eth_init_one
  include/linux/if_ether.h: Add #define ETH_P_LINK_CTL for HPNA and wlan local tunnel
  net: add POLLPRI to sock_def_readable()
  af_unix: Avoid socket->sk NULL OOPS in stream connect security hooks.
  net_sched: pfifo_head_drop problem
  mac80211: remove stray extern
  mac80211: implement off-channel TX using hw r-o-c offload
  mac80211: implement hardware offload for remain-on-channel
  ...

Fallback on the local-mac-address prom property if the Cassini device
does not have an address programmed in the VPD ROM. This uses the same
technique as implemented by the sungem driver.

The problem was reported by Frans van Berckel using Debian kernel 2.6.34-7
on Sun Fire V440. udev was assigning a new eth<n> device name on each reboot
because the cassini driver was using a random MAC address.

Fix tested on 2.6.34-7 and 2.6.37 Sun Fire V440. Compile tested against
2.6.36 davem/sparc-2.6.git
Reported-by: NFrans van Berckel <fberckel@xs4all.nl>
Tested-by: NFrans van Berckel <fberckel@xs4all.nl>
Reviewed-by: NJulian Calaby <julian.calaby@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NRichard Mortimer <richm@oldelvet.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we are already in #ifdef __KERNEL__, we don't need to check it
again.
Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 25edd694 ("sparc64: Get
rid of indirect p1275 PROM call buffer.")  we can't pass virtual
addresses >4GB to PROM calls.

Largely this is never necessary in drivers because we have a copy of
the entire PROM device tree in the kernel and a set of of_*()
interfaces to access it.

Unfortunately there were some lingering prom calls in the atyfb
driver, in particular prom_finddevice() was being called with an
on-stack address which could be anywhere.

This code is actually probing for information we already have, the
PROM choosen console output device is stored in of_console_device so
all of this nasty code consolidates into a one-line comparison.

Next we have some prom_getintdefault() calls which are trivially
transformed into the equivalent of_getintprop_default().

Special thanks to Fabio, who figured out exactly where the bootup
was hanging.  That made this bug trivial to fix.
Reported-by: NFabio M. Di NItto <fabbione@fabbione.net>
Reported-by: NSam Ravnborg <sam@ravnborg.org>
Reported-by: NFrans van Berckel <fberckel@xs4all.nl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NFabio M. Di NItto <fabbione@fabbione.net>

Since nf_bridge_maybe_copy_header() may change the length of skb,
we should check the length of skb after it to handle the ppoe skbs.
Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFerenc Wagner <wferi@niif.hu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFerenc Wagner <wferi@niif.hu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The new firmware interface requires each Slow Path Queue (SPQ) message's
type field to include the function number.  The existing code does not
do this consistently.  We fix this by OR'ing in the function number
into the type field centrally in cnic_submit_kwqe_16().
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In 1ae4de0c, the secctx was exported
via the /proc/net/netfilter/nf_conntrack and ctnetlink interfaces
instead of the secmark.

That patch introduced the use of security_secid_to_secctx() which may
return a non-zero value on error.

In one of my setups, I have NF_CONNTRACK_SECMARK enabled but no
security modules. Thus, security_secid_to_secctx() returns a negative
value that results in the breakage of the /proc and `conntrack -L'
outputs. To fix this, we skip the inclusion of secctx if the
aforementioned function fails.

This patch also fixes the dynamic netlink message size calculation
if security_secid_to_secctx() returns an error, since its logic is
also wrong.

This problem exists in Linux kernel >= 2.6.37.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since nf_ct_expect_dst_hash() may be called without nf_conntrack_lock
locked, nf_ct_expect_hash_rnd should be initialized in the atomic way.

In this patch, we use nf_conntrack_hash_rnd instead of
nf_ct_expect_hash_rnd.
Signed-off-by: NChangli Gao <xiaosuo@gmail.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RFC3168 (The Addition of Explicit Congestion Notification to IP)
states :

5.3.  Fragmentation

   ECN-capable packets MAY have the DF (Don't Fragment) bit set.
   Reassembly of a fragmented packet MUST NOT lose indications of
   congestion.  In other words, if any fragment of an IP packet to be
   reassembled has the CE codepoint set, then one of two actions MUST be
   taken:

      * Set the CE codepoint on the reassembled packet.  However, this
        MUST NOT occur if any of the other fragments contributing to
        this reassembly carries the Not-ECT codepoint.

      * The packet is dropped, instead of being reassembled, for any
        other reason.

This patch implements this requirement for IPv4, choosing the first
action :

If one fragment had NO-ECT codepoint
        reassembled frame has NO-ECT
ElIf one fragment had CE codepoint
        reassembled frame has CE
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Return -ENOMEM instead of 0 for the case of mdiobus_alloc and kmalloc failure.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The original code has a use after free bug because it's not using the
_safe() version of the list_for_each_entry() macro.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a "goto nla_put_failure" hidden inside the NLA_PUT() macro, but
we're holding the dcb_lock so we need to unlock first.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mm: Initialize initial_page_table before paravirt jumps

Return PTR_ERR(port->phydev) instead of 1 if phy_connect failed.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branches 'x86-alternatives-for-linus', 'x86-fpu-for-linus', 'x86-hwmon-for-linus', 'x86-paravirt-for-linus', 'core-locking-for-linus' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resume

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86-64, asm: Use fxsaveq/fxrestorq in more places

* 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hwmon: Add core threshold notification to therm_throt.c

* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, paravirt: Use native_halt on a halt, not native_safe_halt

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking, lockdep: Convert sprintf_symbol to %pS

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: Better struct irqaction layout

Ethertype used by HPNA control protocols (LARQ, rate, link, etc) and by
Broadcom wlan drivers for local signalling.
Signed-off-by: NHenry Ptasinski <henryp@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV, BAU: Extend for more than 16 cpus per socket
  x86, UV: Fix the effect of extra bits in the hub nodeid register
  x86, UV: Add common uv_early_read_mmr() function for reading MMRs

* 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Check tsc available/disabled in the delayed init function
  x86: Improve TSC calibration using a delayed workqueue
  x86: Make tsc=reliable override boot time stability checks