The process_mad device function declares some parameters as "in".  Make those
parameters const and adjust the call tree under process_mad in the various
drivers accordingly.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

For the AH that describs a VLAN interface details, vlan present bit
needs to be set during posting a WQE. This patch adds the code to
allow it happening.
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add the following per-port sysfs traffic counters for RoCE:

        port_xmit_packets
        port_rcv_packets
        port_rcv_data
        port_xmit_data
Signed-off-by: NMitesh Ahuja <mitesh.ahuja@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

For user applications that use UD QPs, always resolve destination MAC
from the GRH.  This is to avoid failure due to any garbage value in
the attr->dmac.
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

ocrdma_query_ah() does not use correct macro, and checks the wrong bit
for the validity of address handle in vector table.  Fix this.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Because of IP-based GIDs, userspace AHs must have MAC and VLAN ID
resolved separately.  Presently, user AHs are broken for ocrdma.  This
patch resolves L2 addresses while creating user AH and obtains the
right DMAC and VLAN ID before creating AH.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Currently, driver obtains service level value from ah_attr->sl field.
However, this field is set to zero all the times from rdma-cm.  This
patch allows create_ah to obtain service level from dev->sl.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch implements routine to query the PFC priority from the
adapter port.

Following are the changes implemented:

 * A new FW command is implemented to query the operational/admin DCBX
   configuration from the FW and obtain active priority(service
   level).
 * Adds support for the async event reported by FW when the PFC
   priority changes. Service level is re-initialized during modify_qp
   or create_ah, based on this event.
 * Maintain SL value in ocrdma_dev structure and refer that as and
   when needed.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Clean up code.  Also modifying GSI QP to error during ocrdma_close is fixed.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This patch is similar in spirit to the "IB/mlx4: Handle Ethernet L2
parameters for IP based GID addressing".  It handles the fact that IP
based RoCE gids don't store Ethernet L2 parameters, MAC and VLAN.

When building an address handle, instead of parsing the dgid to
get the MAC and VLAN, take them from the address handle attributes.

Cc: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fix ah->av->valid bit position and big endian portability.
Signed-off-by: NDevesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

In UMC case, driver needs to fill PVID in the address vector
template for UD traffic.
Signed-off-by: NNaresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Remove redundant dev reference from structures:

1) ocrdma_cq.
2) ocrdma_ah.
3) ocrdma_hw_mr.
4) ocrdma_mw.
5) ocrdma_srq.
Signed-off-by: NNaresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Code cleanup and remove redundant code:

1) redundant initialization removed
2) braces changed as per CodingStyle.
3) redundant checks removed
4) extra braces in return statements removed.
5) removed unused pd pointer from mr.
6) reorganized get_dma_mr()
7) fixed set_av() to return error on invalid sgid index.
8) reference to ocrdma_dev removed from struct ocrdma_pd.
Signed-off-by: NNaresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

I'd like to remove rdma/ib_cache.h some day, so let's avoid
proliferating uses of it unnecessarily.
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NParav Pandit <parav.pandit@emulex.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>