Add a subtype for supporting asymmetric public-key encryption algorithms such
as DSA (FIPS-186) and RSA (PKCS#1 / RFC1337).
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The instantiation data passed to the asymmetric key type are expected to be
formatted in some way, and there are several possible standard ways to format
the data.

The two obvious standards are OpenPGP keys and X.509 certificates.  The latter
is especially useful when dealing with UEFI, and the former might be useful
when dealing with, say, eCryptfs.

Further, it might be desirable to provide formatted blobs that indicate
hardware is to be accessed to retrieve the keys or that the keys live
unretrievably in a hardware store, but that the keys can be used by means of
the hardware.

From userspace, the keys can be loaded using the keyctl command, for example,
an X.509 binary certificate:

	keyctl padd asymmetric foo @s <dhowells.pem

or a PGP key:

	keyctl padd asymmetric bar @s <dhowells.pub

or a pointer into the contents of the TPM:

	keyctl add asymmetric zebra "TPM:04982390582905f8" @s

Inside the kernel, pluggable parsers register themselves and then get to
examine the payload data to see if they can handle it.  If they can, they get
to:

  (1) Propose a name for the key, to be used it the name is "" or NULL.

  (2) Specify the key subtype.

  (3) Provide the data for the subtype.

The key type asks the parser to do its stuff before a key is allocated and thus
before the name is set.  If successful, the parser stores the suggested data
into the key_preparsed_payload struct, which will be either used (if the key is
successfully created and instantiated or updated) or discarded.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Create a key type that can be used to represent an asymmetric key type for use
in appropriate cryptographic operations, such as encryption, decryption,
signature generation and signature verification.

The key type is "asymmetric" and can provide access to a variety of
cryptographic algorithms.

Possibly, this would be better as "public_key" - but that has the disadvantage
that "public key" is an overloaded term.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

In-source documentation for the asymmetric key type.  This will be located in:

	Documentation/crypto/asymmetric-keys.txt
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Provide count_leading/trailing_zeros() macros based on extant arch bit scanning
functions rather than reimplementing from scratch in MPILIB.

Whilst we're at it, turn count_foo_zeros(n, x) into n = count_foo_zeros(x).

Also move the definition to asm-generic as other people may be interested in
using it.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Cc: Arnd Bergmann <arnd@arndb.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Give the key type the opportunity to preparse the payload prior to the
instantiation and update routines being called.  This is done with the
provision of two new key type operations:

	int (*preparse)(struct key_preparsed_payload *prep);
	void (*free_preparse)(struct key_preparsed_payload *prep);

If the first operation is present, then it is called before key creation (in
the add/update case) or before the key semaphore is taken (in the update and
instantiate cases).  The second operation is called to clean up if the first
was called.

preparse() is given the opportunity to fill in the following structure:

	struct key_preparsed_payload {
		char		*description;
		void		*type_data[2];
		void		*payload;
		const void	*data;
		size_t		datalen;
		size_t		quotalen;
	};

Before the preparser is called, the first three fields will have been cleared,
the payload pointer and size will be stored in data and datalen and the default
quota size from the key_type struct will be stored into quotalen.

The preparser may parse the payload in any way it likes and may store data in
the type_data[] and payload fields for use by the instantiate() and update()
ops.

The preparser may also propose a description for the key by attaching it as a
string to the description field.  This can be used by passing a NULL or ""
description to the add_key() system call or the key_create_or_update()
function.  This cannot work with request_key() as that required the description
to tell the upcall about the key to be created.

This, for example permits keys that store PGP public keys to generate their own
name from the user ID and public key fingerprint in the key.

The instantiate() and update() operations are then modified to look like this:

	int (*instantiate)(struct key *key, struct key_preparsed_payload *prep);
	int (*update)(struct key *key, struct key_preparsed_payload *prep);

and the new payload data is passed in *prep, whether or not it was preparsed.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The original module-init-tools module loader used a fnctl lock on the
.ko file to avoid attempts to simultaneously load a module.
Unfortunately, you can't get an exclusive fcntl lock on a read-only
fd, making this not work for read-only mounted filesystems.
module-init-tools has a hacky sleep-and-loop for this now.

It's not that hard to wait in the kernel, and only return -EEXIST once
the first module has finished loading (or continue loading the module
if the first one failed to initialize for some reason).  It's also
consistent with what we do for dependent modules which are still loading.
Suggested-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We use resolve_symbol_wait(), which blocks if the module containing
the symbol is still loading.  However:

1) The module_wq we use is only woken after calling the modules' init
   function, but there are other failure paths after the module is
   placed in the linked list where we need to do the same thing.

2) wake_up() only wakes one waiter, and our waitqueue is shared by all
   modules, so we need to wake them all.

3) wake_up_all() doesn't imply a memory barrier: I feel happier calling
   it after we've grabbed and dropped the module_mutex, not just after
   the state assignment.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela,
ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version
into asm-generic/module.h for all arches bar MIPS.

Also, use the generic definition mod_arch_specific where possible.

To this end, I've defined three new config bools:

 (*) HAVE_MOD_ARCH_SPECIFIC

     Arches define this if they don't want to use the empty generic
     mod_arch_specific struct.

 (*) MODULES_USE_ELF_RELA

     Arches define this if their modules can contain RELA records.  This causes
     the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be
     defined by the arch rather than have the core emit an error message.

 (*) MODULES_USE_ELF_REL

     Arches define this if their modules can contain REL records.  This causes
     the Elf_Rel mapping to be emitted and allows apply_relocate() to be
     defined by the arch rather than have the core emit an error message.

Note that it is possible to allow both REL and RELA records: m68k and mips are
two arches that do this.

With this, some arch asm/module.h files can be deleted entirely and replaced
with a generic-y marker in the arch Kbuild file.

Additionally, I have removed the bits from m32r and score that handle the
unsupported type of relocation record as that's now handled centrally.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Fixes build failure introduced by "Make most arch asm/module.h files use
asm-generic/module.h" by moving all the RELA processing code to a
separate file to be used only for RELA processing on 64-bit kernels.

  CC      arch/mips/kernel/module.o
arch/mips/kernel/module.c:250:14: error: 'reloc_handlers_rela' defined but not
used [-Werror=unused-variable]
cc1: all warnings being treated as errors

make[6]: *** [arch/mips/kernel/module.o] Error 1
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Cloudlinux have a product called lve that includes a kernel module. This
was previously GPLed but is now under a proprietary license, but the
module continues to declare MODULE_LICENSE("GPL") and makes use of some
EXPORT_SYMBOL_GPL symbols. Forcibly taint it in order to avoid this.
Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org>
Cc: Alex Lyashkov <umka@cloudlinux.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org

Pull hwspinlock fix from Ohad Ben-Cohen:
 "A single hwspinlock fix by Wei Yongjun, which prevents potential NULL
  dereferences"

* tag 'hwspinlock-3.6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock:
  hwspinlock/core: move the dereference below the NULL test

IBM reported a soft lockup after applying the fix for the rename_lock
deadlock.  Commit c83ce989 ("VFS: Fix the nfs sillyrename regression
in kernel 2.6.38") was found to be the culprit.

The nfs sillyrename fix used DCACHE_DISCONNECTED to indicate that the
dentry was killed.  This flag can be set on non-killed dentries too,
which results in infinite retries when trying to traverse the dentry
tree.

This patch introduces a separate flag: DCACHE_DENTRY_KILLED, which is
only set in d_kill() and makes try_to_ascend() test only this flag.

IBM reported successful test results with this patch.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull another workqueue fix from Tejun Heo:
 "Unfortunately, yet another late fix.  This too is discovered and fixed
  by Lai.  This bug was introduced during this merge window by commit
  25511a47 ("workqueue: reimplement CPU online rebinding to handle
  idle workers") which started using WORKER_REBIND flag for idle rebind
  too.

  The bug is relatively easy to trigger if the CPU rapidly goes through
  off, on and then off (and stay off).  The fix is on the safer side.
  This hasn't been on linux-next yet but I'm pushing early so that it
  can get more exposure before v3.6 release."

* 'for-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: always clear WORKER_REBIND in busy_worker_rebind_fn()

busy_worker_rebind_fn() didn't clear WORKER_REBIND if rebinding failed
(CPU is down again).  This used to be okay because the flag wasn't
used for anything else.

However, after 25511a47 "workqueue: reimplement CPU online rebinding
to handle idle workers", WORKER_REBIND is also used to command idle
workers to rebind.  If not cleared, the worker may confuse the next
CPU_UP cycle by having REBIND spuriously set or oops / get stuck by
prematurely calling idle_worker_rebind().

  WARNING: at /work/os/wq/kernel/workqueue.c:1323 worker_thread+0x4cd/0x5
 00()
  Hardware name: Bochs
  Modules linked in: test_wq(O-)
  Pid: 33, comm: kworker/1:1 Tainted: G           O 3.6.0-rc1-work+ #3
  Call Trace:
   [<ffffffff8109039f>] warn_slowpath_common+0x7f/0xc0
   [<ffffffff810903fa>] warn_slowpath_null+0x1a/0x20
   [<ffffffff810b3f1d>] worker_thread+0x4cd/0x500
   [<ffffffff810bc16e>] kthread+0xbe/0xd0
   [<ffffffff81bd2664>] kernel_thread_helper+0x4/0x10
  ---[ end trace e977cf20f4661968 ]---
  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff810b3db0>] worker_thread+0x360/0x500
  PGD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  Modules linked in: test_wq(O-)
  CPU 0
  Pid: 33, comm: kworker/1:1 Tainted: G        W  O 3.6.0-rc1-work+ #3 Bochs Bochs
  RIP: 0010:[<ffffffff810b3db0>]  [<ffffffff810b3db0>] worker_thread+0x360/0x500
  RSP: 0018:ffff88001e1c9de0  EFLAGS: 00010086
  RAX: 0000000000000000 RBX: ffff88001e633e00 RCX: 0000000000004140
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000009
  RBP: ffff88001e1c9ea0 R08: 0000000000000000 R09: 0000000000000001
  R10: 0000000000000002 R11: 0000000000000000 R12: ffff88001fc8d580
  R13: ffff88001fc8d590 R14: ffff88001e633e20 R15: ffff88001e1c6900
  FS:  0000000000000000(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000000 CR3: 00000000130e8000 CR4: 00000000000006f0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process kworker/1:1 (pid: 33, threadinfo ffff88001e1c8000, task ffff88001e1c6900)
  Stack:
   ffff880000000000 ffff88001e1c9e40 0000000000000001 ffff88001e1c8010
   ffff88001e519c78 ffff88001e1c9e58 ffff88001e1c6900 ffff88001e1c6900
   ffff88001e1c6900 ffff88001e1c6900 ffff88001fc8d340 ffff88001fc8d340
  Call Trace:
   [<ffffffff810bc16e>] kthread+0xbe/0xd0
   [<ffffffff81bd2664>] kernel_thread_helper+0x4/0x10
  Code: b1 00 f6 43 48 02 0f 85 91 01 00 00 48 8b 43 38 48 89 df 48 8b 00 48 89 45 90 e8 ac f0 ff ff 3c 01 0f 85 60 01 00 00 48 8b 53 50 <8b> 02 83 e8 01 85 c0 89 02 0f 84 3b 01 00 00 48 8b 43 38 48 8b
  RIP  [<ffffffff810b3db0>] worker_thread+0x360/0x500
   RSP <ffff88001e1c9de0>
  CR2: 0000000000000000

There was no reason to keep WORKER_REBIND on failure in the first
place - WORKER_UNBOUND is guaranteed to be set in such cases
preventing incorrectly activating concurrency management.  Always
clear WORKER_REBIND.

tj: Updated comment and description.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Merge fixes from Andrew Morton:
 "13 patches.  12 are fixes and one is a little preparatory thing for
  Andi."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (13 commits)
  memory hotplug: fix section info double registration bug
  mm/page_alloc: fix the page address of higher page's buddy calculation
  drivers/rtc/rtc-twl.c: ensure all interrupts are disabled during probe
  compiler.h: add __visible
  pid-namespace: limit value of ns_last_pid to (0, max_pid)
  include/net/sock.h: squelch compiler warning in sk_rmem_schedule()
  slub: consider pfmemalloc_match() in get_partial_node()
  slab: fix starting index for finding another object
  slab: do ClearSlabPfmemalloc() for all pages of slab
  nbd: clear waiting_queue on shutdown
  MAINTAINERS: fix TXT maintainer list and source repo path
  mm/ia64: fix a memory block size bug
  memory hotplug: reset pgdat->kswapd to NULL if creating kernel thread fails

There may be a bug when registering section info.  For example, on my
Itanium platform, the pfn range of node0 includes the other nodes, so
other nodes' section info will be double registered, and memmap's page
count will equal to 3.

  node0: start_pfn=0x100,    spanned_pfn=0x20fb00, present_pfn=0x7f8a3, => 0x000100-0x20fc00
  node1: start_pfn=0x80000,  spanned_pfn=0x80000,  present_pfn=0x80000, => 0x080000-0x100000
  node2: start_pfn=0x100000, spanned_pfn=0x80000,  present_pfn=0x80000, => 0x100000-0x180000
  node3: start_pfn=0x180000, spanned_pfn=0x80000,  present_pfn=0x80000, => 0x180000-0x200000

  free_all_bootmem_node()
	register_page_bootmem_info_node()
		register_page_bootmem_info_section()

When hot remove memory, we can't free the memmap's page because
page_count() is 2 after put_page_bootmem().

  sparse_remove_one_section()
	free_section_usemap()
		free_map_bootmem()
			put_page_bootmem()

[akpm@linux-foundation.org: add code comment]
Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The heuristic method for buddy has been introduced since commit
43506fad ("mm/page_alloc.c: simplify calculation of combined index
of adjacent buddy lists").  But the page address of higher page's buddy
was wrongly calculated, which will lead page_is_buddy to fail for ever.
IOW, the heuristic method would be disabled with the wrong page address
of higher page's buddy.

Calculating the page address of higher page's buddy should be based
higher_page with the offset between index of higher page and index of
higher page's buddy.
Signed-off-by: NHaifeng Li <omycle@gmail.com>
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: KyongHo Cho <pullip.cho@samsung.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: <stable@vger.kernel.org>	[2.6.38+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On some platforms, bootloaders are known to do some interesting RTC
programming.  Without going into the obscurities as to why this may be
the case, suffice it to say the the driver should not make any
assumptions about the state of the RTC when the driver loads.  In
particular, the driver probe should be sure that all interrupts are
disabled until otherwise programmed.

This was discovered when finding bursty I2C traffic every second on
Overo platforms.  This I2C overhead was keeping the SoC from hitting
deep power states.  The cause was found to be the RTC firing every
second on the I2C-connected TWL PMIC.

Special thanks to Felipe Balbi for suggesting to look for a rogue driver
as the source of the I2C traffic rather than the I2C driver itself.

Special thanks to Steve Sakoman for helping track down the source of the
continuous RTC interrups on the Overo boards.
Signed-off-by: NKevin Hilman <khilman@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Tested-by: NSteve Sakoman <steve@sakoman.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Tested-by: NShubhrajyoti Datta <omaplinuxkernel@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gcc 4.6+ has support for a externally_visible attribute that prevents the
optimizer from optimizing unused symbols away.  Add a __visible macro to
use it with that compiler version or later.

This is used (at least) by the "Link Time Optimization" patchset.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel doesn't check the pid for negative values, so if you try to
write -2 to /proc/sys/kernel/ns_last_pid, you will get a kernel panic.

The crash happens because the next pid is -1, and alloc_pidmap() will
try to access to a nonexistent pidmap.

  map = &pid_ns->pidmap[pid/BITS_PER_PAGE];
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This warning:

  In file included from linux/include/linux/tcp.h:227:0,
                   from linux/include/linux/ipv6.h:221,
                   from linux/include/net/ipv6.h:16,
                   from linux/include/linux/sunrpc/clnt.h:26,
                   from linux/net/sunrpc/stats.c:22:
  linux/include/net/sock.h: In function `sk_rmem_schedule':
  linux/nfs-2.6/include/net/sock.h:1339:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]

is seen with gcc (GCC) 4.6.3 20120306 (Red Hat 4.6.3-2) using the
-Wextra option.

Commit c76562b6 ("netvm: prevent a stream-specific deadlock")
accidentally replaced the "size" parameter of sk_rmem_schedule() with an
unsigned int.  This changes the semantics of the comparison in the
return statement.

In sk_wmem_schedule we have syntactically the same comparison, but
"size" is a signed integer.  In addition, __sk_mem_schedule() takes a
signed integer for its "size" parameter, so there is an implicit type
conversion in sk_rmem_schedule() anyway.

Revert the "size" parameter back to a signed integer so that the
semantics of the expressions in both sk_[rw]mem_schedule() are exactly
the same.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get_partial() is currently not checking pfmemalloc_match() meaning that
it is possible for pfmemalloc pages to leak to non-pfmemalloc users.
This is a problem in the following situation.  Assume that there is a
request from normal allocation and there are no objects in the per-cpu
cache and no node-partial slab.

In this case, slab_alloc enters the slow path and new_slab_objects() is
called which may return a PFMEMALLOC page.  As the current user is not
allowed to access PFMEMALLOC page, deactivate_slab() is called
([5091b74a: mm: slub: optimise the SLUB fast path to avoid pfmemalloc
checks]) and returns an object from PFMEMALLOC page.

Next time, when we get another request from normal allocation,
slab_alloc() enters the slow-path and calls new_slab_objects().  In
new_slab_objects(), we call get_partial() and get a partial slab which
was just deactivated but is a pfmemalloc page.  We extract one object
from it and re-deactivate.

  "deactivate -> re-get in get_partial -> re-deactivate" occures repeatedly.

As a result, access to PFMEMALLOC page is not properly restricted and it
can cause a performance degradation due to frequent deactivation.
deactivation frequently.

This patch changes get_partial_node() to take pfmemalloc_match() into
account and prevents the "deactivate -> re-get in get_partial()
scenario.  Instead, new_slab() is called.
Signed-off-by: NJoonsoo Kim <js1304@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In array cache, there is a object at index 0, check it.
Signed-off-by: NJoonsoo Kim <js1304@gmail.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Right now, we call ClearSlabPfmemalloc() for first page of slab when we
clear SlabPfmemalloc flag.  This is fine for most swap-over-network use
cases as it is expected that order-0 pages are in use.  Unfortunately it
is possible that that __ac_put_obj() checks SlabPfmemalloc on a tail
page and while this is harmless, it is sloppy.  This patch ensures that
the head page is always used.

This problem was originally identified by Joonsoo Kim.

[js1304@gmail.com: Original implementation and problem identification]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a serious but uncommon bug in nbd which occurs when there is heavy
I/O going to the nbd device while, at the same time, a failure (server,
network) or manual disconnect of the nbd connection occurs.

There is a small window between the time that the nbd_thread is stopped
and the socket is shutdown where requests can continue to be queued to
nbd's internal waiting_queue.  When this happens, those requests are
never completed or freed.

The fix is to clear the waiting_queue on shutdown of the nbd device, in
the same way that the nbd request queue (queue_head) is already being
cleared.
Signed-off-by: NPaul Clements <paul.clements@steeleye.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NGang Wei <gang.wei@intel.com>
Cc: Richard L Maliszewski <richard.l.maliszewski@intel.com>
Cc: Gang Wei <gang.wei@intel.com>
Cc: Shane Wang <shane.wang@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I found following definition in include/linux/memory.h, in my IA64
platform, SECTION_SIZE_BITS is equal to 32, and MIN_MEMORY_BLOCK_SIZE
will be 0.

  #define MIN_MEMORY_BLOCK_SIZE     (1 << SECTION_SIZE_BITS)

Because MIN_MEMORY_BLOCK_SIZE is int type and length of 32bits,
so MIN_MEMORY_BLOCK_SIZE(1 << 32) will will equal to 0.
Actually when SECTION_SIZE_BITS >= 31, MIN_MEMORY_BLOCK_SIZE will be wrong.
This will cause wrong system memory infomation in sysfs.
I think it should be:

  #define MIN_MEMORY_BLOCK_SIZE     (1UL << SECTION_SIZE_BITS)

And "echo offline > memory0/state" will cause following call trace:

  kernel BUG at mm/memory_hotplug.c:885!
  sh[6455]: bugcheck! 0 [1]
  Pid: 6455, CPU 0, comm:                   sh
  psr : 0000101008526030 ifs : 8000000000000fa4 ip  : [<a0000001008c40f0>]    Not tainted (3.6.0-rc1)
  ip is at offline_pages+0x210/0xee0
  Call Trace:
    show_stack+0x80/0xa0
    show_regs+0x640/0x920
    die+0x190/0x2c0
    die_if_kernel+0x50/0x80
    ia64_bad_break+0x3d0/0x6e0
    ia64_native_leave_kernel+0x0/0x270
    offline_pages+0x210/0xee0
    alloc_pages_current+0x180/0x2a0
Signed-off-by: NJianguo Wu <wujianguo@huawei.com>
Signed-off-by: NJiang Liu <jiang.liu@huawei.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If kthread_run() fails, pgdat->kswapd contains errno.  When we stop this
thread, we only check whether pgdat->kswapd is NULL and access it.  If
it contains errno, it will cause page fault.  Reset pgdat->kswapd to
NULL when creating kernel thread fails can avoid this problem.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Reviewed-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull InfiniBand/RDMA fixes from Roland Dreier:
 - A couple more IPoIB fixes for regressions introduced by path database
   conversion
 - Minor other fixes to low-level drivers (cxgb4, mlx4, qib, ocrdma)

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/qib: Fix failure of compliance test C14-024#06_LocalPortNum
  RDMA/ocrdma: Fix CQE expansion of unsignaled WQE
  mlx4_core: Fix integer overflows so 8TBs of memory registration works
  IPoIB: Fix AB-BA deadlock when deleting neighbours
  IPoIB: Fix memory leak in the neigh table deletion flow
  RDMA/cxgb4: Move dereference below NULL test

The unregister_sysctl_table() function hangs if all references to its
ctl_table_header structure are not dropped.

This can happen sometimes because of a leak in proc_sys_lookup():
proc_sys_lookup() gets a reference to the table via lookup_entry(), but
it does not release it when a subsequent call to sysctl_follow_link()
fails.

This patch fixes this leak by making sure the reference is always
dropped on return.

See also commit 076c3eed ("sysctl: Rewrite proc_sys_lookup
introducing find_entry and lookup_entry") which reorganized this code in
3.4.

Tested in Linux 3.4.4.
Signed-off-by: NFrancesco Ruggeri <fruggeri@aristanetworks.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull mfd fixes from Samuel Ortiz:
 "This is the remaining MFD fixes for 3.6, with 5 pending fixes:

   - A tps65217 build error fix.
   - A lcp_ich regression fix caused by the MFD driver failing to
     initialize the watchdog sub device due to ACPI conflicts.
   - 2 MAX77693 interrupt handling bug fixes.
   - An MFD core fix, adding an IRQ domain argument to the MFD device
     addition API in order to prevent silent and potentially harmful
     remapping behaviour changes for drivers supporting non-DT
     platforms."

* tag 'mfd-for-linus-3.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: MAX77693: Fix NULL pointer error when initializing irqs
  mfd: MAX77693: Fix interrupt handling bug
  mfd: core: Push irqdomain mapping out into devices
  mfd: lpc_ich: Fix a 3.5 kernel regression for iTCO_wdt driver
  mfd: Move tps65217 regulator plat data handling to regulator

Pull pwm fixes from Thierry Reding:
 "While this comes a bit later than I had wished, both patches are
  rather minor and touch only new drivers so I think these are still
  safe for merging."

* tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: pwm-tiehrpwm: Fix conflicting channel period setting
  pwm: pwm-tiecap: Disable APWM mode after configure

Pull scsi target fixes from Nicholas Bellinger:
 "Here is the current set of target-pending fixes headed for v3.6-final

  The main parts of this series include bug-fixes from Paolo Bonzini to
  address an use-after-free bug in pSCSI sense exception handling, along
  with addressing some long-standing bugs wrt the handling of zero-
  length SCSI CDB payloads also specific to pSCSI pass-through device
  backends."

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: go through normal processing for zero-length REQUEST_SENSE
  target: support zero allocation length in REQUEST SENSE
  target: support zero-size allocation lengths in transport_kmap_data_sg
  target: fail REPORT LUNS with less than 16 bytes of payload
  target: report too-small parameter lists everywhere
  target: go through normal processing for zero-length PSCSI commands
  target: fix use-after-free with PSCSI sense data
  target: simplify code around transport_get_sense_data
  target: move transport_get_sense_data
  target: Check idr_get_new return value in iscsi_login_zero_tsih_s1
  target: Fix ->data_length re-assignment bug with SCSI overflow

Pull power management fixes from Rafael J. Wysocki:
 "Three ACPI device power management fixes related to checking and
  setting device power states."

* tag 'pm-for-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PM: Use KERN_DEBUG when no power resources are found
  ACPI / PM: Fix resource_lock dead lock in acpi_power_on_device
  ACPI / PM: Infer parent power state from child if unknown, v2

Pull a btrfs revert from Chris Mason:
 "My for-linus branch has one revert in the new quota code.

  We're building up more fixes at etc for the next merge window, but I'm
  keeping them out unless they are bigger regressions or have a huge
  impact."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Revert "Btrfs: fix some error codes in btrfs_qgroup_inherit()"

Pull more sound fixes from Takashi Iwai:
 "Yet more (a bunch of) small fixes that slipped from the previous pull
  request.  Most of commits are pending ASoC fixes, all of which are
  fairly trivial commits."

* tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8904: correct the index
  ALSA: hda - Yet another position_fix quirk for ASUS machines
  ASoC: tegra: fix maxburst settings in dmaengine code
  ASoC: samsung dma - Don't indicate support for pause/resume.
  ASoC: mc13783: Remove mono support
  ASoC: arizona: Fix typo in 44.1kHz rates
  ASoC: spear: correct the check for NULL dma_buffer pointer
  sound: tegra_alc5632: remove HP detect GPIO inversion
  ASoC: atmel-ssc: include linux/io.h for raw io
  ASoC: dapm: Don't force card bias level to be updated
  ASoC: dapm: Make sure we update the bias level for CODECs with no op
  ASoC: am3517evm: fix error return code
  ASoC: ux500_msp_i2s: better use devm functions and fix error return code
  ASoC: imx-sgtl5000: fix error return code

This reverts commit 970e1789.

Nikolay Ulyanitsky reported thatthe 3.6-rc5 kernel has a 15-20%
performance drop on PostgreSQL 9.2 on his machine (running "pgbench").

Borislav Petkov was able to reproduce this, and bisected it to this
commit 970e1789 ("sched: Improve scalability via 'CPU buddies' ...")
apparently because the new single-idle-buddy model simply doesn't find
idle CPU's to reschedule on aggressively enough.

Mike Galbraith suspects that it is likely due to the user-mode spinlocks
in PostgreSQL not reacting well to preemption, but we don't really know
the details - I'll just revert the commit for now.

There are hopefully other approaches to improve scheduler scalability
without it causing these kinds of downsides.
Reported-by: NNikolay Ulyanitsky <lystor@gmail.com>
Bisected-by: NBorislav Petkov <bp@alien8.de>
Acked-by: NMike Galbraith <efault@gmx.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch initialize register map of MUIC device because mfd driver
of Maxim MAX77693 use regmap-muic instance of MUIC device when irqs of
Maxim MAX77693 is initialized before call max77693-muic probe() function.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reported-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>