This is a preparation for making more PPMU code common for
EXYNOS devfreq drivers.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>

This is a preparation for making more PPMU code common for
EXYNOS devfreq drivers.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>

This patch converts exynos4_bus driver to use common PPMU code
(exynos_ppmu.c) instead of individual functions related to PPC
because PPMU is integrated module with both PPC and Bus event
generator.  When using PPMU to get bus performance read/write
event exynos4_bus driver deson't need to consider memory type.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
[bzolnier: splitted out changes from the bigger patch]
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>

This patch add CONFIG_PM_OPP dependecy to exynos5_bus driver
to fix probe fail. If CONFIG_PM_OPP is disabled, dev_pm_opp_find_freq_floor()
will always return ERR_PTR(-EINVAL) error.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>

This patch use SIMPLE_DEV_PM_OPS macro instead of legacy method.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>

This patch add CONFIG_PM_OPP dependecy to exynos4_bus driver
to fix probe fail as following log:

[    3.721389] exynos4-busfreq busfreq.3: Fail to add opp entries.
[    3.721697] exynos4-busfreq: probe of busfreq.3 failed with error -22

If CONFIG_PM_OPP is disabled, dev_pm_opp_find_freq_floor() in xxx_probe()
will always return -EINVAL error.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>

This patch use SIMPLE_DEV_PM_OPS macro instead of legacy method.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>

This patch fix bug about resource leak when happening probe fail and code clean
to add debug message.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>

Pull two powerpc fixes from Ben Herrenschmidt:
 "Here are a couple of fixes for 3.15.  One from Anton fixes a nasty
  regression I introduced when trying to fix a loss of irq_work whose
  consequences is that we can completely lose timer interrupts on a
  CPU... not pretty.

  The other one is a change to our PCIe reset hook to use a firmware
  call instead of direct config space accesses to trigger a fundamental
  reset on the root port.  This is necessary so that the FW gets a
  chance to disable the link down error monitoring, which would
  otherwise trip and cause subsequent fatal EEH error"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: irq work racing with timer interrupt can result in timer interrupt hang
  powerpc/powernv: Reset root port in firmware

Pull two btrfs fixes from Chris Mason:
 "This has two fixes that we've been testing for 3.16, but since both
  are safe and fix real bugs, it makes sense to send for 3.15 instead"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: send, fix incorrect ref access when using extrefs
  Btrfs: fix EIO on reading file after ioctl clone works on it

Pull two ceph fixes from Sage Weil:
 "The first patch fixes a problem when we have a page count of 0 for
  sendpage which is triggered by zfs.  The second fixes a bug in CRUSH
  that was resolved in the userland code a while back but fell through
  the cracks on the kernel side"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  crush: decode and initialize chooseleaf_vary_r
  libceph: fix corruption when using page_count 0 page in rbd

Pull xfs fixes from Dave Chinner:
 "Code inspection of the XFS error number sign translations found a
  bunch of issues, including returning incorrectly signed errors for
  some data integrity operations.

  These leak to userspace and result in applications not getting the
  errors correctly reported.  Hence they need fixing sooner rather than
  later.

  A couple of the bugs are in data integrity operations, a couple more
  are in the new COLLAPSE_RANGE code.  One of these came in through a
  recent ext4 merge and so I had to update the base tree to 3.15-rc5
  before fixing the issues"

* tag 'xfs-for-linus-3.15-rc6' of git://oss.sgi.com/xfs/xfs:
  xfs: list_lru_init returns a negative error
  xfs: negate xfs_icsb_init_counters error value
  xfs: negate mount workqueue init error value
  xfs: fix wrong err sign on xfs_set_acl()
  xfs: fix wrong errno from xfs_initxattrs
  xfs: correct error sign on COLLAPSE_RANGE errors
  xfs: xfs_commit_metadata returns wrong errno
  xfs: fix incorrect error sign in xfs_file_aio_read
  xfs: xfs_dir_fsync() returns positive errno

Pull renameat2 arch support from Miklos Szeredi:
 "I've collected architecture patches for the renameat2 syscall that
  maintainers acked and/or asked me to queue.

  This adds architecture support for the renameat2 syscall to m68k,
  parisc, ia64 and through asm-generic to arc, arm64, c6x, hexagon,
  metag, openrisc, score, tile, unicore32"

* 'renameat2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  scripts/checksyscalls.sh: Make renameat optional
  asm-generic: Add renameat2 syscall
  ia64: add renameat2 syscall
  parisc: add renameat2 syscall
  m68k: add renameat2 syscall

Pull iommu fixes from Joerg Roedel:
 "Three fixes for the AMD IOMMU driver:
   - fix a locking issue around get_user_pages()
   - fix two issues with device aliasing and exclusion range handling"

* tag 'iommu-fixes-v3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: fix enabling exclusion range for an exact device
  iommu/amd: Take mmap_sem when calling get_user_pages
  iommu/amd: Fix interrupt remapping for aliased devices

Merge tag 'stable/for-linus-3.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft

Pull iscsi_ibft fix from Konrad Rzeszutek Wilk:
 "Fix iBFT regression on Broadcom NICs introduced in 3.2"

* tag 'stable/for-linus-3.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
  iscsi_ibft: Fix finding Broadcom specific ibft sign

Merge tag 'renesas-sh-drivers-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

Pull SH driver fix from Simon Horman:
 "Compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI

  This resolves a regression introduced in v3.14 by commit bf98c1ea
  ("ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY")"

* tag 'renesas-sh-drivers-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  drivers: sh: compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI

Pull media fixes from Mauro Carvalho Chehab:
 "Most of the changes are drivers fixes (rtl28xuu, fc2580, ov7670,
  davinci, gspca, s5p-fimc and s5c73m3).

  There is also a compat32 fix and one infoleak fixup at the media
  controller"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility mode
  [media] V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from user-space
  [media] media-device: fix infoleak in ioctl media_enum_entities()
  [media] fc2580: fix tuning failure on 32-bit arch
  [media] Prefer gspca_sonixb over sn9c102 for all devices
  [media] media: davinci: vpfe: make sure all the buffers unmapped and released
  [media] staging: media: davinci: vpfe: make sure all the buffers are released
  [media] media: davinci: vpbe_display: fix releasing of active buffers
  [media] media: davinci: vpif_display: fix releasing of active buffers
  [media] media: davinci: vpif_capture: fix releasing of active buffers
  [media] s5p-fimc: Fix YUV422P depth
  [media] s5c73m3: Add missing rename of v4l2_of_get_next_endpoint() function
  [media] rtl28xxu: silence error log about disabled rtl2832_sdr module
  [media] rtl28xxu: do not hard depend on staging SDR module

Pull staging driver fixes from Greg KH:
 "Here are five staging driver fixes for 3.15-rc6 that resolve some
  reported issues.  They are for the imx and rtl8723au drivers"

* tag 'staging-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8723au: Do not reset wdev->iftype in netdev_close()
  staging: rtl8723au: Use correct pipe type for USB interrupts
  imx-drm: imx-tve: correct DDC property name to 'ddc-i2c-bus'
  imx-drm: imx-drm-core: skip components whose parent device is disabled
  imx-drm: imx-drm-core: fix imx_drm_encoder_get_mux_id

Merge tag 'driver-core-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are two driver core (well, sysfs) fixes for 3.15-rc6 that resolve
  some reported issues and a regression from 3.13"

* tag 'driver-core-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: make sure read buffer is zeroed
  kernfs, sysfs, cgroup: restrict extra perm check on open to sysfs

Pull PCI fixes from Bjorn Helgaas:
 "These are fixes for an SHPCHP hotplug regression, a "wait for pending
  transaction" problem (used in device reset paths), and an email
  address update.

  PCI device hotplug:
    - Fix SHPCHP bus speed mismatch issue (Marcel Apfelbaum)

  Miscellaneous:
    - Fix pci_wait_for_pending_transaction() (Gavin Shan)
    - Update email address (Ben Hutchings)"

* tag 'pci-v3.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Wrong register used to check pending traffic
  PCI: shpchp: Check bridge's secondary (not primary) bus speed
  PCI: Update my email address

Pull /dev/random fix from Ted Ts'o:
 "This fixes a BUG_ON-causing regression that was introduced during the
  last merge window"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: fix BUG_ON caused by accounting simplification

Pull clock framework fixes from Mike Turquette:
 "Clock framework and driver fixes, all of which fix user-visible
  regressions.

  As usual most fixes are for platform-specific clock drivers, but there
  are also two fixes to the clk core after recent changes to the way
  that clock unregistration is handled"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: tegra: Fix wrong value written to PLLE_AUX
  clk: shmobile: clk-mstp: change to using clock-indices
  clk: Fix slab corruption in clk_unregister()
  clk: Fix double free due to devm_clk_register()
  clk: socfpga: fix clock driver for 3.15
  clk: divider: Fix best div calculation for power-of-two and table dividers
  clk: bcm281xx: don't use unnamed structs or unions

Pull spi fixes from Mark Brown:
 "A few core fixes around outlying cases here, nothing that should
  affect most users but useful fixes.  The diffstat is rather larger
  than one might hope due some simple code motion in the fix for
  !CONFIG_DMA, the actual meaningful change is much smaller.

   - Fix handling of unsupported dual and quad mode support on slave
     registration so that drivers that can degrade gracefully do so,
     preventing regressions for drivers this is added.
   - Fix build in !CONFIG_DMA cases following addition of generic DMA
     mapping support.
   - Fix error handling for queue creation which due to wider kernel
     changes can be triggered more easily.
   - A couple of driver specific fixes"

* tag 'spi-v3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi/pxa2xx: Prevent DMA from transferring too many bytes
  spi: core: Don't destroy master queue if we fail to create it
  spi: qup: Fix return value checking for pm_runtime_get_sync()
  spi: core: Protect DMA code by #ifdef CONFIG_HAS_DMA
  spi: core: Ignore unsupported Dual/Quad Transfer Mode bits

Pull GPIO fixes from Linus Walleij:
 - fix a null pointer bug in the ICH6 chipset driver
 - fix device tree registration for the mcp23s08 driver

* tag 'gpio-v3.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mcp23s08: Bug fix of SPI device tree registration.
  gpio: ich: set regs and reglen for i3100 and ich6 chipset

Pull more cgroup fixes from Tejun Heo:
 "Three more patches to fix cgroup_freezer breakage due to the recent
  cgroup internal locking changes - an operation cgroup_freezer was
  using now requires sleepable context and cgroup_freezer was invoking
  that while holding a spin lock.  cgroup_freezer was using an overly
  elaborate hierarchical locking scheme.

  While it's possible to convert the hierarchical spinlocks directly to
  mutexes, this patch simplifies the overall locking so that it uses a
  global mutex.  This has the added benefit of avoiding iterating
  potentially huge number of tasks under a spinlock.  While the patch is
  on the larger side in the devel cycle, the changes made are mostly
  straight-forward and the locking logic is a lot simpler afterwards"

* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fix rcu_read_lock() leak in update_if_frozen()
  cgroup_freezer: replace freezer->lock with freezer_mutex
  cgroup: introduce task_css_is_root()

Pull libata fixes from Tejun Heo:
 "Mostly device-specific fixes.  The only thing which isn't is the fix
  for zpodd oops-on-detach bug"

* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: imx: PLL clock needs 100us to settle down
  ata: pata_at91 only works on sam9
  libata: clean up ZPODD when a port is detached
  ahci: imx: software workaround for phy reset issue in resume
  ahci: imx: add namespace for register enums
  ahci: disable DEVSLP for Intel Valleyview

Pull crypto fixes from Herbert Xu:
 "This fixes a NULL pointer dereference on allocation failure in caam,
  as well as a regression in the ctr mode on s390 that was added with
  the recent concurrency fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: s390 - fix aes,des ctr mode concurrency finding.
  crypto: caam - add allocation failure handling in SPRINTFCAT macro

Pull scsi target fixes from Nicholas Bellinger:
 "This series include:

   - Close race between iser-target network portal shutdown + accepting
     new connection logins (sagi)
   - Fix free-after-use regression in tcm_fc post conversion to
     percpu-ida pre-allocation (nab)
   - Explicitly disable Immediate + Unsolicited Data for iser-target
     connections when T10-PI is enabled (sagi + nab)
   - Allow pi_prot_type + emulate_write_cache attributes to be set to
     zero regardless of backend support (andy)
   - memory leak fix (mikulas)"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: fix memory leak on XCOPY
  target: Don't allow setting WC emulation if device doesn't support
  iscsi-target: Disable Immediate + Unsolicited Data with ISER Protection
  tcm_fc: Fix free-after-use regression in ft_free_cmd
  iscsi-target: Change BUG_ON to REJECT in iscsit_process_nop_out
  Target/iscsi,iser: Avoid accepting transport connections during stop stage
  Target/iser: Fix iscsit_accept_np and rdma_cm racy flow
  Target/iser: Fix wrong connection requests list addition
  target: Allow non-supporting backends to set pi_prot_type to 0

Pull i2c fixes from Wolfram Sang:
 "Some I2C bugfixes for 3.15.  Typical stuff, I'd say"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rcar: bail out on zero length transfers
  i2c: qup: Fix pm_runtime_get_sync usage
  i2c: s3c2410: resume race fix
  i2c: nomadik: Don't use IS_ERR for devm_ioremap
  i2c: designware: Mask all interrupts during i2c controller enable

Pull ACPI and power management fixes from Rafael Wysocki:
 "Still fixing regressions (partly by reverting commits that broke
  things for people), fixing other stable-candidate bugs and adding some
  blacklist entries for ACPI video and _OSI.

  Two ACPICA regression fixes (one recent and one for a 3.14 commit), a
  fix for an ACPI-related regression in TPM (introduced in 3.14), a
  revert of the ACPI AC driver conversion in 3.13 that went wrong for an
  unknown reason, two reverts of commits that attempted to remove an old
  user space interface in /proc and broke some utilities, in 3.13 too, a
  fix for a CPU hotplug bug in the ACPI processor driver (stable
  material), two (stable candidate) fixes for intel_pstate and a few new
  blacklist entries, mostly for systems that shipped with Windows 8.

  Specifics:

   - ACPICA fix for a stale pointer access introduced by a recent commit
     in the XSDT validation code from Lv Zheng.

   - ACPICA fix for the default value of the command line switch to
     favor 32-bit FADT addresses (in case there's a conflict between a
     64-bit and a 32-bit address).  The previous default was that the
     32-bit version would take precedence and we tried to change it to
     the other way around and it didn't work.  From Lv Zheng.

   - A TPM commit related to ACPI _DSM in 3.14 caused the driver to
     refuse to load if a specific _DSM was missing and that broke resume
     from system suspend on Chromebooks that require the TPM hardware to
     be restored to a working state during resume by the OS.  Restore
     the old behavior to load the driver if the _DSM in question is not
     present, but prevent it from using the feature the _DSM is for.

   - ACPI AC driver conversion in 3.13 broke thermal management on at
     least one machine and has to be reverted.  From Guenter Roeck.

   - Two reverts of 3.13 commits that attempted to remove the old ACPI
     battery interface in /proc, but turned out to break some utilities
     still using that interface.  From Lan Tianyu.

   - ACPI processor driver fix to prevent acpi_processor_add() from
     modifying the CPU device's .offline field which leads to breakage
     if the initial online of the CPU fails.  From Igor Mammedov.

   - Two intel_pstate fixes, one to take a BayTrail documentation update
     into account and one to avoid forcing the maximum P-state on init
     which causes CPU PM trouble on systems with P-states coordination
     when one of the CPU cores is initialized after an offline/online
     cycle triggered by user space.  Both stable candidates, from Dirk
     Brandewie.

   - Fix for the ACPI video DMI blacklist entry for Dell Inspiron 7520
     from Aaron Lu.

   - Two new ACPI video blacklist entries for machines shipping with
     Win8 that need to use native backlight so that it can be controlled
     in a usual way (which doesn't work otherwise due bugs in the ACPI
     tables) from Hans de Goede.

   - Two ACPI _OSI quirks for systems that need them to work correctly
     with Linux from Edward Lin and Hans de Goede"

* tag 'pm+acpi-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: Revert native brightness quirk for ThinkPad T530
  intel_pstate: remove setting P state to MAX on init
  ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses.
  ACPI / video: correct DMI tag for Dell Inspiron 7520
  intel_pstate: Set turbo VID for BayTrail
  ACPI / TPM: Fix resume regression on Chromebooks
  ACPI / proc: Do not say when /proc interfaces will be deleted in Kconfig
  ACPI / processor: do not mark present at boot but not onlined CPU as onlined
  ACPI: Revert "ACPI / AC: convert ACPI ac driver to platform bus"
  ACPI / blacklist: Add dmi_enable_osi_linux quirk for Asus EEE PC 1015PX
  ACPI: blacklist win8 OSI for Dell Inspiron 7737
  ACPI / video: Add use_native_backlight quirks for more systems
  ACPI: Revert "ACPI / Battery: Remove battery's proc directory"
  ACPI: Revert "ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c"
  ACPICA: Tables: Fix invalid pointer accesses in acpi_tb_parse_root_table().

Pull device mapper fixes from Mike Snitzer:
 "A dm-crypt fix for a cpu hotplug crash that switches from using
  per-cpu data to a mempool allocation (which offers allocation with cpu
  locality, and there is no inter-cpu communication on slab allocation).

  A couple dm-thinp stable fixes to address "out-of-data-space" issues.

  A dm-multipath fix for a LOCKDEP warning introduced in 3.15-rc1"

* tag 'dm-3.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm mpath: fix lock order inconsistency in multipath_ioctl
  dm thin: add timeout to stop out-of-data-space mode holding IO forever
  dm thin: allow metadata commit if pool is in PM_OUT_OF_DATA_SPACE mode
  dm crypt: fix cpu hotplug crash by removing per-cpu structure

Pull device tree fixes from Grant Likely:
 "Drivercore bugfixes for v3.15

  This branch contains bug fixes important to get into v3.15.  There is
  a fix for modifying properties seen during early boot, a fix for an
  incorrect prototype when CONFIG_OF=n, and a couple of corrections to
  device tree memory nodes on a few platforms"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux:
  mips: dts: Fix missing device_type="memory" property in memory nodes
  arm: dts: Fix missing device_type="memory" for ste-ccu8540
  of: fix CONFIG_OF=n prototype of of_node_full_name()
  of: make of_update_property() usable earlier in the boot process

When running send, if an inode only has extended reference items
associated to it and no regular references, send.c:get_first_ref()
was incorrectly assuming the reference it found was of type
BTRFS_INODE_REF_KEY due to use of the wrong key variable.
This caused weird behaviour when using the found item has a regular
reference, such as weird path string, and occasionally (when lucky)
a crash:

[  190.600652] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
[  190.600994] Modules linked in: btrfs xor raid6_pq binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc psmouse serio_raw evbug pcspkr i2c_piix4 e1000 floppy
[  190.602565] CPU: 2 PID: 14520 Comm: btrfs Not tainted 3.13.0-fdm-btrfs-next-26+ #1
[  190.602728] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  190.602868] task: ffff8800d447c920 ti: ffff8801fa79e000 task.ti: ffff8801fa79e000
[  190.603030] RIP: 0010:[<ffffffff813266b4>]  [<ffffffff813266b4>] memcpy+0x54/0x110
[  190.603262] RSP: 0018:ffff8801fa79f880  EFLAGS: 00010202
[  190.603395] RAX: ffff8800d4326e3f RBX: 000000000000036a RCX: ffff880000000000
[  190.603553] RDX: 000000000000032a RSI: ffe708844042936a RDI: ffff8800d43271a9
[  190.603710] RBP: ffff8801fa79f8c8 R08: 00000000003a4ef0 R09: 0000000000000000
[  190.603867] R10: 793a4ef09f000000 R11: 9f0000000053726f R12: ffff8800d43271a9
[  190.604020] R13: 0000160000000000 R14: ffff8802110134f0 R15: 000000000000036a
[  190.604020] FS:  00007fb423d09b80(0000) GS:ffff880216200000(0000) knlGS:0000000000000000
[  190.604020] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  190.604020] CR2: 00007fb4229d4b78 CR3: 00000001f5d76000 CR4: 00000000000006e0
[  190.604020] Stack:
[  190.604020]  ffffffffa01f4d49 ffff8801fa79f8f0 00000000000009f9 ffff8801fa79f8c8
[  190.604020]  00000000000009f9 ffff880211013260 000000000000f971 ffff88021147dba8
[  190.604020]  00000000000009f9 ffff8801fa79f918 ffffffffa02367f5 ffff8801fa79f928
[  190.604020] Call Trace:
[  190.604020]  [<ffffffffa01f4d49>] ? read_extent_buffer+0xb9/0x120 [btrfs]
[  190.604020]  [<ffffffffa02367f5>] fs_path_add_from_extent_buffer+0x45/0x60 [btrfs]
[  190.604020]  [<ffffffffa0238806>] get_first_ref+0x1f6/0x210 [btrfs]
[  190.604020]  [<ffffffffa0238994>] __get_cur_name_and_parent+0x174/0x3a0 [btrfs]
[  190.604020]  [<ffffffff8118df3d>] ? kmem_cache_alloc_trace+0x11d/0x1e0
[  190.604020]  [<ffffffffa0236674>] ? fs_path_alloc+0x24/0x60 [btrfs]
[  190.604020]  [<ffffffffa0238c91>] get_cur_path+0xd1/0x240 [btrfs]
(...)

Steps to reproduce (either crash or some weirdness like an odd path string):

    mkfs.btrfs -f -O extref /dev/sdd
    mount /dev/sdd /mnt

    mkdir /mnt/testdir
    touch /mnt/testdir/foobar

    for i in `seq 1 2550`; do
        ln /mnt/testdir/foobar /mnt/testdir/foobar_link_`printf "%04d" $i`
    done

    ln /mnt/testdir/foobar /mnt/testdir/final_foobar_name

    rm -f /mnt/testdir/foobar
    for i in `seq 1 2550`; do
        rm -f /mnt/testdir/foobar_link_`printf "%04d" $i`
    done

    btrfs subvolume snapshot -r /mnt /mnt/mysnap
    btrfs send /mnt/mysnap -f /tmp/mysnap.send
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NChris Mason <clm@fb.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>

For inline data extent, we need to make its length aligned, otherwise,
we can get a phantom extent map which confuses readpages() to return -EIO.

This can be detected by xfstests/btrfs/035.
Reported-by: NDavid Disseldorp <ddiss@suse.de>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

The new renameat2 syscall provides all the functionality of renameat
with an additional flags argument, so make renameat optional so that
future architectures can omit it without getting a warning.

This patch doesn't affect existing architectures.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: linux-arch@vger.kernel.org

Add the renameat2 syscall to the generic syscall list, which is used by the
following architectures: arc, arm64, c6x, hexagon, metag, openrisc, score,
tile, unicore32.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: linux-arch@vger.kernel.org
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-hexagon@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>

Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Acked-by: NTony Luck <tony.luck@intel.com>

Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Acked-by: NHelge Deller <deller@gmx.de>

Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>