Just inline it into flush_icache_range() which is the only
user.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__get_phys is only called from init.c as is prom_virt_to_phys(),
__get_iospace() is not called at all, and sun4u_get_pte() is largely
misnamed.

Privatize the implementation and helper functions of
sun4u_get_phys() to mm/init.c, and rename to
kvaddr_to_paddr().

The only used of this thing is flush_icache_range(), and thus
things can be considerably further simplified.  For example,
we should only see module or PAGE_OFFSET kernel addresses here,
so we don't need the OBP firmware range handling at all.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We already get those from asm/sections.h
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kick out empty entries as soon as we spot them, and use memmove()
instead of a silly loop to make the operation more clear.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Decrease the SECTION_SIZE_BITS --> MAX_PHYSADDR_BITS
range a little bit.

The cost of going to SPARSEMEM_STATIC becomes 8K of BSS space, and in
return we save a pointer dereferences on every page struct lookup.
Even better we hit the main kernel image for the base address which is
in a hugepage locked TLB entry.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This helps deal with the invisible bridge that sits between
the host controller and the top-most visisble PCI devices
on hypervisor systems.

For example, on T1000 the bus-range property says 2 --> 4
and so there is a PCI express bridge at bus 2, devfn 0, etc.

So if we don't force the dummy host controller to bus zero,
we'll try to create two devices with the same domain/bus/devfn
triplet.

Also, add some more log diagnostics to make debugging stuff like this
easyer.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We fake up a dummy one in all cases because that is the simplest
thing to do and it happens to be necessary for hypervisor systems.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a similar patch for x86_64 written by
Stephen Hemminger.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set but never used.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We don't do the "Simba APB is a PBM" bogosity for Sabre
controllers any longer, so this pbms_same_domain thing
is no longer necessary.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implemented but never actually used.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All the implementations can be identical and generic, so
no need for controller specific methods.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is only used in one spot and we can just fetch the
OF property right there.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set but never used.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It can be done for every PCI configuration using OF properties.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SIMBA APB bridge is strange, it is a PCI bridge but it lacks
some standard OF properties, in particular it lacks a 'ranges'
property.

What you have to do is read the IO and MEM range registers in
the APB bridge to determine the ranges handled by each bridge.
So fill in the bus resources by doing that.

Since we now handle this quirk in the generic PCI and OF device
probing layers, we can flat out eliminate all of that code from
the sabre pci controller driver.

In fact we can thus eliminate completely another quirk of the sabre
driver.  It tried to make the two APB bridges look like PBMs but that
makes zero sense now (and it's questionable whether it ever made sense).
So now just use pbm_A and probe the whole PCI hierarchy using that as
the root.

This simplification allows many future cleanups to occur.

Also, I've found yet another quirk that needs to be worked around
while testing this.  You can't use the 'class-code' OF firmware
property, especially for IDE controllers.  We have to read the value
out of PCI config space or else we'll see the value the device was
showing before it was programmed into native mode.

I'm starting to think it might be wise to just read all of the values
out of PCI config space instead of using the OF properties. :-/
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Need to traverse recursively down child busses else we only
get the file created under devices at the top-level.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The only user was bus_dvma_to_mem() which is no longer used
by any driver, so kill that, and the export of pci_memspace_mask.

The only user now is the PCI mmap support code.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Almost entirely taken from the 64-bit PowerPC PCI code.

This allowed to eliminate a ton of cruft from the sparc64
PCI layer.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also, do not try to compute resources by hand, instead use
the pre-computed ones in the of_device.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also, we don't need to store or use the PBM so kill that
from the linux_ebus.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also __sparc__ --> CONFIG_SPARC
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And use CONFIG_SPARC instead of CONFIG_SPARC64 as the
test.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just like powerpc does.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This allows us to simplify sharing code with powerpc which
has properties that have various forms of capitalization
when on the sparc64 side the property is all lower-case.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have several platforms using local copies of identical
code.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This starts bringing the PowerPC and Sparc implemetations back closer
together.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Finally, we actually change the functions themselves.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>