Up to now we force enable the local apic in the devicetree setup
uncoditionally and set smp_found_config unconditionally to 1 when a
devicetree blob is available. This breaks, when local apic is disabled
in the Kconfig.

Make it consistent by initializing device tree explicitely before
smp_get_config() so a non lapic configuration could be used as well.
To be functional that would require to implement PIT as an interrupt
host, but the only user of this code until now is ce4100 which
requires apics to be available. So we leave this up to those who need
it.
Tested-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Both OLPC and CE4100 activate CONFIG_OF. OLPC uses PROMTREE while CE
uses FLATTREE. Compiling for OLPC only breaks due to missing flat tree
functions and variables.

Use proper wrappers and provide an empty x86_flattree_get_config()
inline so OF=y FLATTREE=n builds and works.

[ tglx: Make it work with HPET_TIMER=n and make a function static ]
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This allows to load the OF driver based informations from the device
tree. Systems without BIOS may need to perform some initialization.
PowerPC creates a PNP device from the OF information and performs this
kind of initialization in their private PCI quirk. This looks more
generic.

This patch also avoids registering the platform RTC driver on X86 if
we have a device tree blob. Otherwise we would setup the device based
on the hardcoded information in arch/x86 rather than the device tree
based one.

[ tglx: Changed "int of_have_populated_dt()" to bool as recommended by
        Grant ]
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
Cc: rtc-linux@googlegroups.com
Cc: Alessandro Zummo <a.zummo@towertech.it>
LKML-Reference: <1298405266-1624-12-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Use device tree information to setup IO_APIC configuration, interrupt
routing, HPET and everything else which cannot be enumerated by other
means.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-11-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

ioapic_xlate provides a translation from the information in device tree
to ioapic related informations. This includes
- obtaining hw irq which is the vector number "=> pin number + gsi"
- obtaining type (level/edge/..)
- programming this information into ioapic

ioapic_add_ofnode adds an irq_domain based on informations from the device
tree. This information (irq_domain) is required in order to map a device to
its proper interrupt controller.

[ tglx: Adapted to the io_apic changes, which let us move that whole code
  	to devicetree.c ]
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-10-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

For now we probe these busses and we change this to board dependent
probes once we have to.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-9-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

x86_of_pci_init() does two things:

- it provides a generic irq enable and disable function. enable queries
  the device tree for the interrupt information, calls ->xlate on the
  irq host and updates the pci->irq information for the device.

- it walks through PCI bus(es) in the device tree and adds its children
  (device) nodes to appropriate pci_dev nodes in kernel. So the dtb
  node information is available at probe time of the PCI device.

Adding a PCI bus based on the information in the device tree is
currently not supported. Right now direct access via ioports is used.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-8-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Set hpet_address based on information provied form DTB
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Dirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <1298405266-1624-7-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

APIC and IO_APIC have to be added to the system early because
native_init_IRQ() requires it.

In order to obtain the address of the ioapic the device tree has to be
unflattened so of_address_to_resource() works.

The device tree is relocated to ensure it is always covered by the
kernel mapping. That way the boot loader does not have to make
any assumptions about kernel's memory layout.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Dirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <1298405266-1624-6-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The here introduced irq_domain abstraction represents a generic irq
controller. It is a subset of powerpc's irq_host which is going to be
renamed to irq_domain and then become generic. This implementation will
be removed once it is generic.

The xlate callback is resposible to parse irq informations like irq type
and number and returns the hardware irq number which is reported by the
hardware as active.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-5-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

History:
v1..v2:
- dropped device_type except for cpu & pci. I have the compatible string
  for pci so I can drop the device_type once it is possible
- I lowercased all compatible types. I will need to resend some patches
  which have upper case intel
- The cpu had the same compatible string as the soc node. So I added to
  the soc node -immr for internel memory mapped registers.
- I added generic names for all parts.
- I reworked the i2c bars matching the way you suggested. I added a
  compatible node for the PCI device which only the PCI ids in its
  compatible string. The bars (each represents a complete i2c
  controller) have a "intel,ce4100-i2c-controller" compatible node. It
  is not used by the driver.
  The driver is probed via PCI ids (by the pci subsystem not OF) and
  matches the bar address against the ressource in the child node. Once
  there is a hit the node is attached.
- The SPI driver is also probed via pci. However I also attached a
  compatible property based on PCI ids

v2..v3:
- intel,ce4100-immr become intel,ce4100-cp. cp stands for core
  peripherals. The Atom data sheet talks here about ACPI devices. Since
  we don't have ACPI this does not apply here.
- The interrupt map is gone. There are now plenty of device nodes.
- The "unit address string" got fixed, it uses not DD,V format.

v3..v4:
- added descriptions for compatible nodes introduced here:
  - intel,ce4100-ioapic
  - intel,ce4100-lapic
  - intel,ce4100-hpet
  - intel,ce4100
  - intel,ce4100-cp
  - intel,ce4100-pci
- added a description about I2C controller magic.
- Added gpio-controller and gpio-cells property to gpio devices. Those
  properties are not (yet) used.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-4-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds minimal support for device tree on x86. The device
tree blob is passed to the kernel via setup_data which requires at
least boot protocol 2.09.

Memory size, restricted memory regions, boot arguments are gathered
the traditional way so things like cmd_line are just here to let the
code compile.

The current plan is use the device tree as an extension and to gather
information which can not be enumerated and would have to be hardcoded
otherwise. This includes things like 
   - which devices are on this I2C/SPI bus?
   - how are the interrupts wired to IO APIC?
   - where could my hpet be?
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-3-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch ensures that the memory passed from parse_setup_data() is
large enough to cover the complete data structure. That means that the
conditional mapping in parse_e820_ext() can go.

While here, I also attempt not to map two pages if the address is not
aligned to a page boundary.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
Cc: sodaville@linutronix.de
Cc: devicetree-discuss@lists.ozlabs.org
LKML-Reference: <1298405266-1624-2-git-send-email-bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Required for devicetree based io_apic configuration.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

io_apic_set_pci_routing() and mp_save_irq() check the pin_programmed
bit before calling io_apic_setup_irq_pin() and set the bit when the
pin was setup.

Move that duplicated code into a separate function and use it.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

There is no point to have irq_trigger() and irq_polarity() as wrappers
around the MPBIOS_* camel case functions. Get rid of both the inlines
and the ugly camel case.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

No users outside of io_apic.c. Mark bad_ioapic() __init while at it.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Another version of the same thing. Only set the pin programmed, when
the setup function succeeds.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Replace the duplicated code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The only difference here is that we did not call
__add_pin_to_irq_node() for the legacy irqs, but that's not worth 30
lines of extra code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Remove the duplicated code and call the function. It does not matter
whether we allocated the cfg before calling setup_local_APIC() and we
can set the irq chip and handler after that as well.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

There are about four places in the ioapic code which do exactly the
same setup sequence. Also the OF based ioapic setup needs that
function to avoid putting the OF specific code into ioapic.c
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Two consecutive

    for(...)
    for(...)

lines to avoid an extra indentation are just horrible to read. I had
to look more than once to figure out what the code is doing.

Split out the inner loop into a separate function.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This is debug code and it does not matter at all whether we print each
not connected pin in an extra line or try to be extra clever.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Stupid me missed the functions called from setup.c. Add the stubs back
for OLPC=n
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Since commit 7cd92366
lAPIC enabled accidently the IOAPIC, which now gets fixed.
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
LKML-Reference: <1298385487-4708-5-git-send-email-henne@nachtwindheim.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds IOAPIC dummy functions for compilation
with local APIC, but without IOAPIC.

The local variable ioapic_entries in enable_IR_x2apic()
does not need initialization anymore, since the dummy
returns NULL.
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
LKML-Reference: <1298385487-4708-4-git-send-email-henne@nachtwindheim.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently arch_disable_smp_support() on x86 disables only the
support for the IOAPIC and is also compiled in if SMP-support is
not.

Therefore this function is renamed to disable_ioapic_support(),
which meets its purpose and is only compiled in the kernel
when IOAPIC support is also.

A new arch_disable_smp_support() is created in smpboot.c,
which calls disable_ioapic_support() and gets only compiled
in the kernel when SMP support is also.
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
LKML-Reference: <1298385487-4708-3-git-send-email-henne@nachtwindheim.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This is a dummy function, used when no IOAPIC is compiled in.
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
LKML-Reference: <1298385487-4708-2-git-send-email-henne@nachtwindheim.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This enum is used by non IOAPIC code, so apicdef.h is
the best place for it.
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
LKML-Reference: <1298385487-4708-1-git-send-email-henne@nachtwindheim.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

OLPC_OPENFIRMWARE_DT is just there to be selected by OLPC and selects
OF_PROMTREE. So let OLPC select OF_PROMTREE and remove that extra
config indirection. Fixup code and Makefile and use CONFIG_OF_PROMTREE
instead.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@queued.net>

Neither CONFIG_OLPC_OPENFIRMWARE nor CONFIG_OLPC_OPENFIRMWARE_DT are
really necessary.

OLPC selects OLPC_OPENFIRMWARE unconditionally, so move the "select
OF" part under OLPC config option and fixup the dependencies in
Makefiles and code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@queued.net>

OLPC selects OLPC_OPENFIRMWARE unconditionally. If OLPC=n then
the OLPC_OPENFIRMWARE functionality is pointless.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@queued.net>

OLPC is under if X86_32 already.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@queued.net>

Marcin Slusarz says:

> In arch/arm/kernel/kprobes-decode.c there's a function
> arm_kprobe_decode_insn which does:
>
> } else if ((insn & 0x0e000000) == 0x0c400000) {
> ...
>
> This is always false, so code below is dead.
> I found this bug by coccinelle (http://coccinelle.lip6.fr/).
Reported-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

There's no need to noMMU to put tlb_flush() in asm/tlbflush.h - it's
part of the tlb shootdown interface.  Move it to asm/tlb.h instead, as
per x86.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We need to delay freeing any mapped page on SMP and ARMv7 systems to
ensure that the data is not accessed by other CPUs, or is used for
speculative prefetch with ARMv7.  This includes not only mapped pages
but also pages used for the page tables themselves.

This avoids races with the MMU/other CPUs accessing pages after they've
been freed but before we've invalidated the TLB.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When SMP_ON_UP is used and the spinlocks are inlined, we end up with
inline spinlocks in the exit code, with references from the SMP
alternatives section to the exit sections.  This causes link time
errors.  Avoid this by placing the exit sections in the init-discarded
region.

Cc: <stable@kernel.org>
Tested-by: NDave Martin <dave.martin@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Ensure a predictable endian state when entering signal handlers.  This
avoids programs which use SETEND to momentarily switch their endian
state from having their signal handlers entered with an unpredictable
endian state.

Cc: <stable@kernel.org>
Acked-by: NDave Martin <dave.martin@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 18991197 added --build-id
linker option when toolchain supports it. ARM one does, but for some
reason places the section at 0 when linker script doesn't mention it
explicitly.

The 1e621a8e worked around the problem
removing this section from binary image with explicit objcopy options,
but it still exists in vmlinux, confusing tools like debuggers and perf.

This problem was discussed here:
http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html
http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html
but the proposed changes to the linker script were substantial.

This patch simply places NOTES (36 bytes long, at least when compiled
with CodeSourcery toolchain) between data and bss, which seem to be
the right place (and suggested by the sample linker script in
include/asm-generic/vmlinux.lds.h).

It is enough to place it correctly in vmlinux (so debuggers are happy):

Section Headers:
  [11] .data             PROGBITS        c07ce000 7ce000 020fc0 00  WA  0   0 32
  [12] .notes            NOTE            c07eefc0 7eefc0 000024 00  AX  0   0  4
  [13] .bss              NOBITS          c07ef000 7eefe4 01e628 00  WA  0   0 32
Program Headers:
  LOAD           0x008000 0xc0008000 0xc0008000 0x7e6fe4 0x805628 RWE 0x8000
  NOTE           0x7eefc0 0xc07eefc0 0xc07eefc0 0x00024 0x00024 R E 0x4
Section to Segment mapping:
  Segment Sections...
   00     <...> .data .notes .bss
   01     .notes

and to get it exposed as /sys/kernel/notes used by perf tools.
Signed-off-by: NPawel Moll <pawel.moll@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>