- 19 3月, 2015 2 次提交
-
-
由 Alexander Graf 提交于
With binutils 2.25 the default alignment for 32bit arm sections changed to have everything 64k aligned. Armv7 binaries built with this binutils version run successfully on an arm64 system. Since effectively there is now the chance to run armv7 code on arm64 even with 64k page size, it doesn't make sense to block people from enabling CONFIG_COMPAT on those configurations. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Andreas Schwab 提交于
The arm mmap2 syscall takes the offset in units of 4K, thus with 64K pages the offset needs to be scaled to units of pages. Signed-off-by: NAndreas Schwab <schwab@suse.de> Signed-off-by: NAlexander Graf <agraf@suse.de> [will: removed redundant lr parameter, localised PAGE_SHIFT #if check] Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
- 18 3月, 2015 4 次提交
-
-
由 Steve Capper 提交于
Commit f4f75ad5 ("efi: efistub: Convert into static library") introduced a static library for EFI stub, libstub. The EFI libstub directory is referenced by the kernel build system via a obj subdirectory rule in: drivers/firmware/efi/Makefile Unfortunately, arm64 also references the EFI libstub via: libs-$(CONFIG_EFI_STUB) += drivers/firmware/efi/libstub/ If we're unlucky, the kernel build system can enter libstub via two simultaneous threads resulting in build failures such as: fixdep: error opening depfile: drivers/firmware/efi/libstub/.efi-stub-helper.o.d: No such file or directory scripts/Makefile.build:257: recipe for target 'drivers/firmware/efi/libstub/efi-stub-helper.o' failed make[1]: *** [drivers/firmware/efi/libstub/efi-stub-helper.o] Error 2 Makefile:939: recipe for target 'drivers/firmware/efi/libstub' failed make: *** [drivers/firmware/efi/libstub] Error 2 make: *** Waiting for unfinished jobs.... This patch adjusts the arm64 Makefile to reference the compiled library explicitly (as is currently done in x86), rather than the directory. Fixes: f4f75ad5 efi: efistub: Convert into static library Signed-off-by: NSteve Capper <steve.capper@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Mark Rutland 提交于
We currently don't log the boot mode for arm64 as we do for arm, and without KVM the user is provided with no indication as to which mode(s) CPUs were booted in, which can seriously hinder debugging in some cases. Add logging to the boot path once all CPUs are up. Where CPUs are mismatched in violation of the boot protocol, WARN and set a taint (as we do for CPU other CPU feature mismatches) given that the firmware/bootloader is buggy and should be fixed. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Mark Rutland 提交于
Commit 828e9834 ("arm64: head: create a new function for setting the boot_cpu_mode flag") added BOOT_CPU_MODE_EL1, a nonzero value replacing uses of zero. However it failed to update __boot_cpu_mode appropriately. A CPU booted at EL2 writes BOOT_CPU_MODE_EL2 to __boot_cpu_mode[0], and a CPU booted at EL1 writes BOOT_CPU_MODE_EL1 to __boot_cpu_mode[1]. Later is_hyp_mode_mismatched() determines there to be a mismatch if __boot_cpu_mode[0] != __boot_cpu_mode[1]. If all CPUs are booted at EL1, __boot_cpu_mode[0] will be set to BOOT_CPU_MODE_EL1, but __boot_cpu_mode[1] will retain its initial value of zero, and is_hyp_mode_mismatched will erroneously determine that the boot modes are mismatched. This hasn't been a problem so far, but later patches which will make use of is_hyp_mode_mismatched() expect it to work correctly. This patch initialises __boot_cpu_mode[1] to BOOT_CPU_MODE_EL1, fixing the erroneous mismatch detection when all CPUs are booted at EL1. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
由 Mark Rutland 提交于
Currently we only perform alternative patching for kernels built with CONFIG_SMP, as we call apply_alternatives_all() in smp.c, which is only built for CONFIG_SMP. Thus !SMP kernels may not have necessary alternatives patched in. This patch ensures that we call apply_alternatives_all() once all CPUs are booted, even for !SMP kernels, by having the smp_init_cpus() stub call this for !SMP kernels via up_late_init. A new wrapper, do_post_cpus_up_work, is added so we can hook other calls here later (e.g. boot mode logging). Cc: Andre Przywara <andre.przywara@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Fixes: e039ee4e ("arm64: add alternative runtime patching") Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
- 17 3月, 2015 1 次提交
-
-
由 Peter Crosthwaite 提交于
ARM64 has the yield nop hint which has the intended semantics of cpu_relax. Implement. The immediate application is ARM CPU emulators. An emulator can take advantage of the yield hint to de-prioritise an emulated CPU in favor of other emulation tasks. QEMU A64 SMP emulation has yield awareness, and sees a significant boot time performance increase with this change. Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com>
-
- 16 3月, 2015 6 次提交
-
-
由 Linus Torvalds 提交于
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fix from Dave Airlie: "An oops snuck in in an -rc3 patch, this fixes it" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: [PATCH] drm/mm: Fix support 4 GiB and larger ranges
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clock framework fixes from Michael Turquette: "The clk fixes for 4.0-rc4 comprise three themes. First are the usual driver fixes for new regressions since v3.19. Second are fixes to the common clock divider type caused by recent changes to how we round clock rates. This affects many clock drivers that use this common code. Finally there are fixes for drivers that improperly compared struct clk pointers (drivers must not deref these pointers). While some of these drivers have done this for a long time, this did not cause a problem until we started generating unique struct clk pointers for every consumer. A new function, clk_is_match was introduced to get these drivers working again and they are fixed up to no longer deref the pointers themselves" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: ASoC: kirkwood: fix struct clk pointer comparing ASoC: fsl_spdif: fix struct clk pointer comparing ARM: imx: fix struct clk pointer comparing clk: introduce clk_is_match clk: don't export static symbol clk: divider: fix calculation of initial best divider when rounding to closest clk: divider: fix selection of divider when rounding to closest clk: divider: fix calculation of maximal parent rate for a given divider clk: divider: return real rate instead of divider value clk: qcom: fix platform_no_drv_owner.cocci warnings clk: qcom: fix platform_no_drv_owner.cocci warnings clk: qcom: Add PLL4 vote clock clk: qcom: lcc-msm8960: Fix PLL rate detection clk: qcom: Fix slimbus n and m val offsets clk: ti: Fix FAPLL parent enable bit handling
-
由 Krzysztof Kolasa 提交于
bad argument if(tmp)... in check_free_hole fix oops: kernel BUG at drivers/gpu/drm/drm_mm.c:305! [airlied: excellent, this was my task for today]. Signed-off-by: NKrzysztof Kolasa <kkolasa@winsoft.pl> Reviewed-by: NChris wilson <chris@chris-wilson.co.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "This is a rather unpleasantly large set of bug fixes for arm-soc, Most of them because of cross-tree dependencies for Exynos where we should have figured out the right path to merge things before the merge window, and then the maintainer being unable to sort things out in time during a business trip. The other changes contained here are the usual collection: MAINTAINERS file updates - Gregory Clement is now a co-maintainer for the legacy Marvell EBU platforms - A MAINTAINERS entry for the Freescale Vybrid platform that was added last year - Matt Porter no longer works as a maintainer on Broadcom SoCs Build-time issues - A compile-time error for at91 - Several minor DT fixes on at91, imx, exynos, socfpga, and omap - The new digicolor platform was not correctly enabled at all Configuration issues - Two defconfig fix for regressions using USB on versatile express and on OMAP3 - Enabling all 8 CPUs on Allwinner/SUNxi - Enabling the new STiH410 platform to be usable Bug fixes in platform code - A missing barrier for socfpga - Fixing LPDDR1 self-refresh mode on at91 - Fixing RTC interrupt numbers on Exynos3250 - Fixing a cache-coherency issues in CPU power-down on Exynos5 - Multiple small OMAP power management fixes" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (69 commits) MAINTAINERS: Add myself as co-maintainer to the legacy support of the mvebu SoCs ARM: at91: pm_slowclock: fix the compilation error ARM: at91/dt: fix USB high-speed clock to select UTMI ARM: at91/dt: fix at91 udc compatible strings ARM: at91/dt: declare matrix node as a syscon device ARM: vexpress: update CONFIG_USB_ISP1760 option ARM: digicolor: add the machine directory to Makefile ARM: STi: Add STiH410 SoC support MAINTAINERS: add Freescale Vybrid SoC MAINTAINERS: Remove self as ARM mach-bcm co-maintainer ARM: imx6sl-evk: set swbst_reg as vbus's parent reg ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definition ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-boot ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig ARM: dts: dra7x-evm: avoid possible contention while muxing on CAN lines ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl ARM: dts: am43xx: fix SLEWCTRL_FAST pinctrl binding ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding ARM: dts: OMAP5: fix polling intervals for thermal zones ...
-
git://git.infradead.org/users/jcooper/linux由 Linus Torvalds 提交于
Pull irqchip fixes from Jason Cooper: "armada-370-xp: - Chained per-cpu interrupts gic{,-v3,v3-its}" - Various fixes for safer operation" * tag 'irqchip-fixes-4.0' of git://git.infradead.org/users/jcooper/linux: irqchip: gicv3-its: Support safe initialization irqchip: gicv3-its: Define macros for GITS_CTLR fields irqchip: gicv3-its: Add limitation to page order irqchip: gicv3-its: Use 64KB page as default granule irqchip: gicv3-its: Zero itt before handling to hardware irqchip: gic-v3: Fix out of bounds access to cpu_logical_map irqchip: gic: Fix unsafe locking reported by lockdep irqchip: gicv3-its: Fix unsafe locking reported by lockdep irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration irqchip: gicv3-its: Allocate enough memory for the full range of DeviceID irqchip: gicv3-its: Fix ITS CPU init irqchip: armada-370-xp: Fix chained per-cpu interrupts
-
- 15 3月, 2015 7 次提交
-
-
由 Jason Cooper 提交于
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Misc i915, vmwgfx and radeon fixes along with a fix for one of those recursive sleep mutex debug cases in the mst code" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Fix an issue with the device losing its irq line on module unload drm/vmwgfx: Correctly NULLify dma buffer pointer on failure drm/vmwgfx: Reorder device takedown somewhat drm/vmwgfx: Fix a couple of lock dependency violations drm/radeon: drop setting UPLL to sleep mode drm/radeon: fix wait to actually occur after the signaling callback drm/i915: Prevent TLB error on first execution on SNB drm/i915: Do both mt and gen6 style forcewake reset on ivb probe drm/i915: Make WAIT_IOCTL negative timeouts be indefinite again drm/i915: use in_interrupt() not in_irq() to check context drm/mst: fix recursive sleep warning on qlock drm: Don't assign fbs for universal cursor support to files
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fix from James Bottomley: "This is a simple fix for a domain revalidation crash which has recently turned up in the libsas code (applies to mvsas, isc and aic94xx)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: libsas: Fix Kernel Crash in smp_execute_task
-
git://git.samba.org/jlayton/linux由 Linus Torvalds 提交于
Pull file locking bugfix from Jeff Layton: "Just a small fix for a potential problem in one of the lease tracepoints" * tag 'locks-v4.0-4' of git://git.samba.org/jlayton/linux: locks: fix generic_delete_lease tracepoint to use victim pointer
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO fix from Alex Williamson: "Add missing break to avoid clobbering ioctl (Alexey Kardashevskiy)" * tag 'vfio-v4.0-rc4' of git://github.com/awilliam/linux-vfio: vfio-pci: Add missing break to enable VFIO_PCI_ERR_IRQ_INDEX
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - add TLB invalidation for page table tear-down which was missed when support for CONFIG_HAVE_RCU_TABLE_FREE was added (assuming page table freeing was always deferred) - use UEFI for system and reset poweroff if available - fix asm label placement in relation to the alignment statement * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: put __boot_cpu_mode label after alignment instead of before efi/arm64: use UEFI for system reset and poweroff arm64: Invalidate the TLB corresponding to intermediate page table levels
-
由 Linus Torvalds 提交于
Merge tag 'linux-kselftest-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fix from Shuah Khan: "selftests/exec: Check if the syscall exists and bail if not" * tag 'linux-kselftest-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/exec: Check if the syscall exists and bail if not
-
- 14 3月, 2015 11 次提交
-
-
由 Jeff Layton 提交于
It's possible that "fl" won't point at a valid lock at this point, so use "victim" instead which is either a valid lock or NULL. Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
-
由 Ard Biesheuvel 提交于
Another one for the big head.S spring cleaning: the label should be after the .align or it may point to the padding. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Ard Biesheuvel 提交于
If UEFI Runtime Services are available, they are preferred over direct PSCI calls or other methods to reset the system. For the reset case, we need to hook into machine_restart(), as the arm_pm_restart function pointer may be overwritten by modules. Tested-by: NMark Rutland <mark.rutland@arm.com> Reviewed-by: NMark Rutland <mark.rutland@arm.com> Reviewed-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
The ARM architecture allows the caching of intermediate page table levels and page table freeing requires a sequence like: pmd_clear() TLB invalidation pte page freeing With commit 5e5f6dc1 (arm64: mm: enable HAVE_RCU_TABLE_FREE logic), the page table freeing batching was moved from tlb_remove_page() to tlb_remove_table(). The former takes care of TLB invalidation as this is also shared with pte clearing and page cache page freeing. The latter, however, does not invalidate the TLBs for intermediate page table levels as it probably relies on the architecture code to do it if required. When the mm->mm_users < 2, tlb_remove_table() does not do any batching and page table pages are freed before tlb_finish_mmu() which performs the actual TLB invalidation. This patch introduces __tlb_flush_pgtable() for arm64 and calls it from the {pte,pmd,pud}_free_tlb() directly without relying on deferred page table freeing. Fixes: 5e5f6dc1 arm64: mm: enable HAVE_RCU_TABLE_FREE logic Reported-by: NJon Masters <jcm@redhat.com> Tested-by: NJon Masters <jcm@redhat.com> Tested-by: NSteve Capper <steve.capper@linaro.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael Wysocki: "Just two fixes, one for an ACPI LPSS driver issue introduced during the 3.17 cycle and one revert of a recent commit that sort of broke the cpupower tool. Specifics: - Fix an ACPI LPSS (Low-Power Subsystem) driver issue causing the 8250_dw driver to confuse an LPSS clock with another one it is supposed to handle due to the lack of identification allowing it to tell those clocks apart (Heikki Krogerus). - Revert a recent commit that was supposed to improve the usability of the cpupower tool, but clearly did the opposite (Josh Boyer)" * tag 'pm+acpi-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "cpupower Makefile change to help run the tool without 'make install'" ACPI / LPSS: provide con_id for the clkdev
-
由 Gregory CLEMENT 提交于
I will also take care of the legacy support(not fully converted to DT) of the mvebu SoCs. Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: NAndrew Lunn <andrew@lunn.ch> Acked-by: NJason Cooper <jason@lakedaemon.net> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Rafael J. Wysocki 提交于
* pm-tools: Revert "cpupower Makefile change to help run the tool without 'make install'"
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen bug fixes from David Vrabel: - fix a PV regression in 3.19. - fix a dom0 crash on hosts with large numbers of PIRQs. - prevent pcifront from disabling memory or I/O port access, which may trigger host crashes. * tag 'stable/for-linus-4.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-pciback: limit guest control of command register xen/events: avoid NULL pointer dereference in dom0 on large machines xen: Remove trailing semicolon from xenbus_register_frontend() definition x86/xen: correct bug in p2m list initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "This is a round of HD-audio fixes: there are a long-standing regression fix and a few more device/codec-specific quirks. In addition, a couple of FireWire regression fixes, a USB-audio quirk for Roland UA-22 and a sanity check in API for user-defined control elements" * tag 'sound-4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Don't access stereo amps for mono channel widgets ALSA: hda - Add workaround for MacBook Air 5,2 built-in mic ALSA: hda - Set single_adc_amp flag for CS420x codecs ALSA: snd-usb: add quirks for Roland UA-22 ALSA: control: Add sanity checks for user ctl id name string ALSA: hda - Fix built-in mic on Compaq Presario CQ60 ALSA: firewire-lib: leave unit reference counting completely Revert "ALSA: dice: fix wrong offsets for Dice interface" ALSA: hda - Fix regression of HD-audio controller fallback modes
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux由 Linus Torvalds 提交于
Pull DeviceTree fixes from Rob Herring: - fix for stdout-path option parsing with added unittest - fix for stdout-path interaction with earlycon - several DT unittest fixes - fix Sparc allmodconfig build error on of_platform_register_reconfig_notifier - several DT overlay kconfig and build warning fixes - several DT binding documentation updates * tag 'devicetree-fixes-for-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of/platform: Fix sparc:allmodconfig build of: unittest: Add options string testcase variants of: fix handling of '/' in options for of_find_node_by_path() of/unittest: Fix the wrong expected value in of_selftest_property_string of/unittest: remove the duplicate of_changeset_init dt: submitting-patches: clarify that DT maintainers are to be cced on bindings of: unittest: fix I2C dependency of/overlay: Remove unused variable Documentation: DT: Renamed of-serial.txt to 8250.txt of: Fix premature bootconsole disable with 'stdout-path' serial: add device tree binding documentation for ETRAX FS UART of/overlay: Directly include idr.h of: Drop superfluous dependance for OF_OVERLAY of: Add vendor prefix for Arasan of: Add prompt for OF_OVERLAY config
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull gadgetfs fixes from Al Viro: "Assorted fixes around AIO on gadgetfs: leaks, use-after-free, troubles caused by ->f_op flipping" * 'gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: gadgetfs: really get rid of switching ->f_op gadgetfs: get rid of flipping ->f_op in ep_config() gadget: switch ep_io_operations to ->read_iter/->write_iter gadgetfs: use-after-free in ->aio_read() gadget/function/f_fs.c: switch to ->{read,write}_iter() gadget/function/f_fs.c: use put iov_iter into io_data gadget/function/f_fs.c: close leaks move iov_iter.c from mm/ to lib/ new helper: dup_iter()
-
- 13 3月, 2015 9 次提交
-
-
由 Guenter Roeck 提交于
sparc:allmodconfig fails to build with: drivers/built-in.o: In function `platform_bus_init': (.init.text+0x3684): undefined reference to `of_platform_register_reconfig_notifier' of_platform_register_reconfig_notifier is only declared if both OF_ADDRESS and OF_DYNAMIC are configured. Yet, the include file only declares a dummy function if OF_DYNAMIC is not configured. The sparc architecture does not configure OF_ADDRESS, but does configure OF_DYNAMIC, causing above error. Fixes: 801d728c ("of/reconfig: Add OF_DYNAMIC notifier for platform_bus_type") Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Takashi Iwai 提交于
The current HDA generic parser initializes / modifies the amp values always in stereo, but this seems causing the problem on ALC3229 codec that has a few mono channel widgets: namely, these mono widgets react to actions for both channels equally. In the driver code, we do care the mono channel and create a control only for the left channel (as defined in HD-audio spec) for such a node. When the control is updated, only the left channel value is changed. However, in the resume, the right channel value is also restored from the initial value we took as stereo, and this overwrites the left channel value. This ends up being the silent output as the right channel has been never touched and remains muted. This patch covers the places where unconditional stereo amp accesses are done and converts to the conditional accesses. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94581 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: memcg: disable hierarchy support if bound to the legacy cgroup hierarchy mm: reorder can_do_mlock to fix audit denial kasan, module: move MODULE_ALIGN macro into <linux/moduleloader.h> kasan, module, vmalloc: rework shadow allocation for modules fanotify: fix event filtering with FAN_ONDIR set mm/nommu.c: export symbol max_mapnr arch/c6x/include/asm/pgtable.h: define dummy pgprot_writecombine for !MMU nilfs2: fix deadlock of segment constructor during recovery mm: cma: fix CMA aligned offset calculation mm, hugetlb: close race when setting PageTail for gigantic pages mm, oom: do not fail __GFP_NOFAIL allocation if oom killer is disabled drivers/rtc/rtc-s3c.c: add .needs_src_clk to s3c6410 RTC data ocfs2: make append_dio an incompat feature
-
由 Vladimir Davydov 提交于
If the memory cgroup controller is initially mounted in the scope of the default cgroup hierarchy and then remounted to a legacy hierarchy, it will still have hierarchy support enabled, which is incorrect. We should disable hierarchy support if bound to the legacy cgroup hierarchy. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Vander Stoep 提交于
A userspace call to mmap(MAP_LOCKED) may result in the successful locking of memory while also producing a confusing audit log denial. can_do_mlock checks capable and rlimit. If either of these return positive can_do_mlock returns true. The capable check leads to an LSM hook used by apparmour and selinux which produce the audit denial. Reordering so rlimit is checked first eliminates the denial on success, only recording a denial when the lock is unsuccessful as a result of the denial. Signed-off-by: NJeff Vander Stoep <jeffv@google.com> Acked-by: NNick Kralevich <nnk@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Paul Cassella <cassella@cray.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Ryabinin 提交于
include/linux/moduleloader.h is more suitable place for this macro. Also change alignment to PAGE_SIZE for CONFIG_KASAN=n as such alignment already assumed in several places. Signed-off-by: NAndrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Ryabinin 提交于
Current approach in handling shadow memory for modules is broken. Shadow memory could be freed only after memory shadow corresponds it is no longer used. vfree() called from interrupt context could use memory its freeing to store 'struct llist_node' in it: void vfree(const void *addr) { ... if (unlikely(in_interrupt())) { struct vfree_deferred *p = this_cpu_ptr(&vfree_deferred); if (llist_add((struct llist_node *)addr, &p->list)) schedule_work(&p->wq); Later this list node used in free_work() which actually frees memory. Currently module_memfree() called in interrupt context will free shadow before freeing module's memory which could provoke kernel crash. So shadow memory should be freed after module's memory. However, such deallocation order could race with kasan_module_alloc() in module_alloc(). Free shadow right before releasing vm area. At this point vfree()'d memory is not used anymore and yet not available for other allocations. New VM_KASAN flag used to indicate that vm area has dynamically allocated shadow memory so kasan frees shadow only if it was previously allocated. Signed-off-by: NAndrey Ryabinin <a.ryabinin@samsung.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Suzuki K. Poulose 提交于
With FAN_ONDIR set, the user can end up getting events, which it hasn't marked. This was revealed with fanotify04 testcase failure on Linux-4.0-rc1, and is a regression from 3.19, revealed with 66ba93c0 ("fanotify: don't set FAN_ONDIR implicitly on a marks ignored mask"). # /opt/ltp/testcases/bin/fanotify04 [ ... ] fanotify04 7 TPASS : event generated properly for type 100000 fanotify04 8 TFAIL : fanotify04.c:147: got unexpected event 30 fanotify04 9 TPASS : No event as expected The testcase sets the adds the following marks : FAN_OPEN | FAN_ONDIR for a fanotify on a dir. Then does an open(), followed by close() of the directory and expects to see an event FAN_OPEN(0x20). However, the fanotify returns (FAN_OPEN|FAN_CLOSE_NOWRITE(0x10)). This happens due to the flaw in the check for event_mask in fanotify_should_send_event() which does: if (event_mask & marks_mask & ~marks_ignored_mask) return true; where, event_mask == (FAN_ONDIR | FAN_CLOSE_NOWRITE), marks_mask == (FAN_ONDIR | FAN_OPEN), marks_ignored_mask == 0 Fix this by masking the outgoing events to the user, as we already take care of FAN_ONDIR and FAN_EVENT_ON_CHILD. Signed-off-by: NSuzuki K. Poulose <suzuki.poulose@arm.com> Tested-by: NLino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 gchen gchen 提交于
Several modules may need max_mapnr, so export, the related error with allmodconfig under c6x: MODPOST 3327 modules ERROR: "max_mapnr" [fs/pstore/ramoops.ko] undefined! ERROR: "max_mapnr" [drivers/media/v4l2-core/videobuf2-dma-contig.ko] undefined! Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-