We currently set REQ_WRITE/WRITE for all non READ IOs
like discard, flush, writesame, etc. In the next patches where we
no longer set up the op as a bitmap, we will not be able to
detect a operation direction like writesame by testing if REQ_WRITE is
set.

This patch converts the drivers and cgroup to use the
op_is_write helper. This should just cover the simple
cases. I did dm, md and bcache in their own patches
because they were more involved.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: NMike Christie <mchristi@redhat.com>

Fixed up fs/ext4/crypto.c
Signed-off-by: NJens Axboe <axboe@fb.com>

Now that we converted everything to the newer block write cache
interface, kill off the queue flush_flags and queueable flush
entries.
Signed-off-by: NJens Axboe <axboe@fb.com>

We could kmalloc() the payload, so need the offset in page.
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Request-based DM's blk-mq support (dm-mq) was reported to be 50% slower
than if an underlying null_blk device were used directly.  One of the
reasons for this drop in performance is that blk_insert_clone_request()
was calling blk_mq_insert_request() with @async=true.  This forced the
use of kblockd_schedule_delayed_work_on() to run the blk-mq hw queues
which ushered in ping-ponging between process context (fio in this case)
and kblockd's kworker to submit the cloned request.  The ftrace
function_graph tracer showed:

  kworker-2013  =>   fio-12190
  fio-12190    =>  kworker-2013
  ...
  kworker-2013  =>   fio-12190
  fio-12190    =>  kworker-2013
  ...

Fixing blk_insert_clone_request()'s blk_mq_insert_request() call to
_not_ use kblockd to submit the cloned requests isn't enough to
eliminate the observed context switches.

In addition to this dm-mq specific blk-core fix, there are 2 DM core
fixes to dm-mq that (when paired with the blk-core fix) completely
eliminate the observed context switching:

1)  don't blk_mq_run_hw_queues in blk-mq request completion

    Motivated by desire to reduce overhead of dm-mq, punting to kblockd
    just increases context switches.

    In my testing against a really fast null_blk device there was no benefit
    to running blk_mq_run_hw_queues() on completion (and no other blk-mq
    driver does this).  So hopefully this change doesn't induce the need for
    yet another revert like commit 621739b0 !

2)  use blk_mq_complete_request() in dm_complete_request()

    blk_complete_request() doesn't offer the traditional q->mq_ops vs
    .request_fn branching pattern that other historic block interfaces
    do (e.g. blk_get_request).  Using blk_mq_complete_request() for
    blk-mq requests is important for performance.  It should be noted
    that, like blk_complete_request(), blk_mq_complete_request() doesn't
    natively handle partial completions -- but the request-based
    DM-multipath target does provide the required partial completion
    support by dm.c:end_clone_bio() triggering requeueing of the request
    via dm-mpath.c:multipath_end_io()'s return of DM_ENDIO_REQUEUE.

dm-mq fix #2 is _much_ more important than #1 for eliminating the
context switches.
Before: cpu          : usr=15.10%, sys=59.39%, ctx=7905181, majf=0, minf=475
After:  cpu          : usr=20.60%, sys=79.35%, ctx=2008, majf=0, minf=472

With these changes multithreaded async read IOPs improved from ~950K
to ~1350K for this dm-mq stacked on null_blk test-case.  The raw read
IOPs of the underlying null_blk device for the same workload is ~1950K.

Fixes: 7fb4898e ("block: add blk-mq support to blk_insert_cloned_request()")
Fixes: bfebd1cd ("dm: add full blk-mq support to request-based DM")
Cc: stable@vger.kernel.org # 4.1+
Reported-by: NSagi Grimberg <sagig@dev.mellanox.co.il>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Acked-by: NJens Axboe <axboe@kernel.dk>

If block device is left runtime suspended during system suspend, resume
hook of the driver typically corrects runtime PM status of the device back
to "active" after it is resumed. However, this is not enough as queue's
runtime PM status is still "suspended". As long as it is in this state
blk_pm_peek_request() returns NULL and thus prevents new requests to be
processed.

Add new function blk_set_runtime_active() that can be used to force the
queue status back to "active" as needed.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NTejun Heo <tj@kernel.org>

When a storage device rejects a WRITE SAME command we will disable write
same functionality for the device and return -EREMOTEIO to the block
layer. -EREMOTEIO will in turn prevent DM from retrying the I/O and/or
failing the path.

Yiwen Jiang discovered a small race where WRITE SAME requests issued
simultaneously would cause -EIO to be returned. This happened because
any requests being prepared after WRITE SAME had been disabled for the
device caused us to return BLKPREP_KILL. The latter caused the block
layer to return -EIO upon completion.

To overcome this we introduce BLKPREP_INVALID which indicates that this
is an invalid request for the device. blk_peek_request() is modified to
return -EREMOTEIO in that case.
Reported-by: NYiwen Jiang <jiangyiwen@huawei.com>
Suggested-by: NMike Snitzer <snitzer@redhat.com>
Reviewed-by: NHannes Reinicke <hare@suse.de>
Reviewed-by: NEwan Milne <emilne@redhat.com>
Reviewed-by: NYiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

We currently only have an inline/sync helper to restart a stopped
queue. If drivers need an async version, they have to roll their
own. Add a generic helper instead.
Signed-off-by: NJens Axboe <axboe@fb.com>

blk_queue_bio() does split then bounce, which makes the segment
counting based on pages before bouncing and could go wrong. Move
the split to after bouncing, like we do for blk-mq, and the we
fix the issue of having the bio count for segments be wrong.

Fixes: 54efd50b ("block: make generic_make_request handle arbitrarily sized bios")
Cc: stable@vger.kernel.org
Tested-by: NArtem S. Tashkinov <t.artem@lycos.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Timer context is not very useful for drivers to perform any meaningful abort
action from.  So instead of calling the driver from this useless context
defer it to a workqueue as soon as possible.

Note that while a delayed_work item would seem the right thing here I didn't
dare to use it due to the magic in blk_add_timer that pokes deep into timer
internals.  But maybe this encourages Tejun to add a sensible API for that to
the workqueue API and we'll all be fine in the end :)

Contains a major update from Keith Bush:

"This patch removes synchronizing the timeout work so that the timer can
 start a freeze on its own queue. The timer enters the queue, so timer
 context can only start a freeze, but not wait for frozen."
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The routines in scsi_pm.c assume that if a runtime-PM callback is
invoked for a SCSI device, it can only mean that the device's driver
has asked the block layer to handle the runtime power management (by
calling blk_pm_runtime_init(), which among other things sets q->dev).

However, this assumption turns out to be wrong for things like the ses
driver.  Normally ses devices are not allowed to do runtime PM, but
userspace can override this setting.  If this happens, the kernel gets
a NULL pointer dereference when blk_post_runtime_resume() tries to use
the uninitialized q->dev pointer.

This patch fixes the problem by checking q->dev in block layer before
handle runtime PM. Since ses doesn't define any PM callbacks and call
blk_pm_runtime_init(), the crash won't occur.

This fixes Bugzilla #101371.
https://bugzilla.kernel.org/show_bug.cgi?id=101371

More discussion can be found from below link.
http://marc.info/?l=linux-scsi&m=144163730531875&w=2Signed-off-by: NKen Xue <Ken.Xue@amd.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Xiangliang Yu <Xiangliang.Yu@amd.com>
Cc: James E.J. Bottomley <JBottomley@odin.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michael Terry <Michael.terry@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>

We already have the reserved flag, and a nowait flag awkwardly encoded as
a gfp_t.  Add a real flags argument to make the scheme more extensible and
allow for a nicer calling convention.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

When a cloned request is retried on other queues it always needs
to be checked against the queue limits of that queue.
Otherwise the calculations for nr_phys_segments might be wrong,
leading to a crash in scsi_init_sgtable().

To clarify this the patch renames blk_rq_check_limits()
to blk_cloned_rq_check_limits() and removes the symbol
export, as the new function should only be used for
cloned requests and never exported.

Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NHannes Reinecke <hare@suse.de>
Fixes: e2a60da7 ("block: Clean up special command handling logic")
Cc: stable@vger.kernel.org # 3.7+
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This patch fixes the checkpatch.pl error to blk-exec.c:

ERROR: do not initialise globals to 0 or NULL
Signed-off-by: NWei Tang <tangwei@cmss.chinamobile.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Name the cache after the actual name of the struct.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Fix kernel-doc warning in blk-core.c:

Warning(..//block/blk-core.c:1549): No description found for parameter 'same_queue_rq'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add basic support for polling for specific IO to complete. This uses
the cookie that blk-mq passes back, which enables the block layer
to pass this cookie to the driver to spin for a specific request.

This will be combined with request latency tracking, so we can make
qualified decisions about when to poll and when not to. For now, for
benchmark purposes, we add a sysfs file that controls whether polling
is enabled or not.
Signed-off-by: NJens Axboe <axboe@fb.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>

No functional changes in this patch, but it prepares us for returning
a more useful cookie related to the IO that was queued up.
Signed-off-by: NJens Axboe <axboe@fb.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NKeith Busch <keith.busch@intel.com>

__GFP_WAIT was used to signal that the caller was in atomic context and
could not sleep.  Now it is possible to distinguish between true atomic
context and callers that are not willing to sleep.  The latter should
clear __GFP_DIRECT_RECLAIM so kswapd will still wake.  As clearing
__GFP_WAIT behaves differently, there is a risk that people will clear the
wrong flags.  This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly
indicate what it does -- setting it allows all reclaim activity, clearing
them prevents it.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd

__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts.  They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve".  __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".

Over time, callers had a requirement to not block when fallback options
were available.  Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.

This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative.  High priority users continue to use
__GFP_HIGH.  __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim.  __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim.  __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.

This patch then converts a number of sites

o __GFP_ATOMIC is used by callers that are high priority and have memory
  pools for those requests. GFP_ATOMIC uses this flag.

o Callers that have a limited mempool to guarantee forward progress clear
  __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
  into this category where kswapd will still be woken but atomic reserves
  are not used as there is a one-entry mempool to guarantee progress.

o Callers that are checking if they are non-blocking should use the
  helper gfpflags_allow_blocking() where possible. This is because
  checking for __GFP_WAIT as was done historically now can trigger false
  positives. Some exceptions like dm-crypt.c exist where the code intent
  is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
  flag manipulations.

o Callers that built their own GFP flags instead of starting with GFP_KERNEL
  and friends now also need to specify __GFP_KSWAPD_RECLAIM.

The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.

The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL.  They may
now wish to specify __GFP_KSWAPD_RECLAIM.  It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.
Signed-off-by: NMel Gorman <mgorman@techsingularity.net>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Request queues with merging disabled will not flush the plug list after
BLK_MAX_REQUEST_COUNT requests have been queued, since the code relies
on blk_attempt_plug_merge to compute the request_count.  Fix this by
computing the number of queued requests even for nomerge queues.
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Since they lack requests to pin the request_queue active, synchronous
bio-based drivers may have in-flight integrity work from
bio_integrity_endio() that is not flushed by blk_freeze_queue().  Flush
that work to prevent races to free the queue and the final usage of the
blk_integrity profile.

This is temporary unless/until bio-based drivers start to generically
take a q_usage_counter reference while a bio is in-flight.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
[martin: fix the CONFIG_BLK_DEV_INTEGRITY=n case]
Tested-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Allow pmem, and other synchronous/bio-based block drivers, to fallback
on a per-cpu reference count managed by the core for tracking queue
live/dead state.

The existing per-cpu reference count for the blk_mq case is promoted to
be used in all block i/o scenarios.  This involves initializing it by
default, waiting for it to drop to zero at exit, and holding a live
reference over the invocation of q->make_request_fn() in
generic_make_request().  The blk_mq code continues to take its own
reference per blk_mq request and retains the ability to freeze the
queue, but the check that the queue is frozen is moved to
generic_make_request().

This fixes crash signatures like the following:

 BUG: unable to handle kernel paging request at ffff880140000000
 [..]
 Call Trace:
  [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70
  [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem]
  [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem]
  [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0
  [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110
  [<ffffffff8141f966>] submit_bio+0x76/0x170
  [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160
  [<ffffffff81286e62>] submit_bh+0x12/0x20
  [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170
  [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90
  [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270
  [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30
  [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250
  [<ffffffff81303494>] ext4_put_super+0x64/0x360
  [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

bdi's are initialized in two steps, bdi_init() and bdi_register(), but
destroyed in a single step by bdi_destroy() which, for a bdi embedded
in a request_queue, is called during blk_cleanup_queue() which makes
the queue invisible and starts the draining of remaining usages.

A request_queue's user can access the congestion state of the embedded
bdi as long as it holds a reference to the queue.  As such, it may
access the congested state of a queue which finished
blk_cleanup_queue() but hasn't reached blk_release_queue() yet.
Because the congested state was embedded in backing_dev_info which in
turn is embedded in request_queue, accessing the congested state after
bdi_destroy() was called was fine.  The bdi was destroyed but the
memory region for the congested state remained accessible till the
queue got released.

a13f35e8 ("writeback: don't embed root bdi_writeback_congested in
bdi_writeback") changed the situation.  Now, the root congested state
which is expected to be pinned while request_queue remains accessible
is separately reference counted and the base ref is put during
bdi_destroy().  This means that the root congested state may go away
prematurely while the queue is between bdi_dstroy() and
blk_cleanup_queue(), which was detected by Andrey's KASAN tests.

The root cause of this problem is that bdi doesn't distinguish the two
steps of destruction, unregistration and release, and now the root
congested state actually requires a separate release step.  To fix the
issue, this patch separates out bdi_unregister() and bdi_exit() from
bdi_destroy().  bdi_unregister() is called from blk_cleanup_queue()
and bdi_exit() from blk_release_queue().  bdi_destroy() is now just a
simple wrapper calling the two steps back-to-back.

While at it, the prototype of bdi_destroy() is moved right below
bdi_setup_and_register() so that the counterpart operations are
located together.
Signed-off-by: NTejun Heo <tj@kernel.org>
Fixes: a13f35e8 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback")
Cc: stable@vger.kernel.org # v4.2+
Reported-and-tested-by: NAndrey Konovalov <andreyknvl@google.com>
Link: http://lkml.kernel.org/g/CAAeHK+zUJ74Zn17=rOyxacHU18SgCfC6bsYW=6kCY5GXJBwGfQ@mail.gmail.comReviewed-by: NJan Kara <jack@suse.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

blkg (blkcg_gq) currently is created by blkcg policies invoking
blkg_lookup_create() which ends up repeating about the same code in
different policies.  Theoretically, this can avoid the overhead of
looking and/or creating blkg's if blkcg is enabled but no policy is in
use; however, the cost of blkg lookup / creation is very low
especially if only the root blkcg is in use which is highly likely if
no blkcg policy is in active use - it boils down to a single very
predictable conditional and surrounding RCU protection.

This patch consolidates blkg creation to a new function
blkcg_bio_issue_check() which is called during bio issue from
generic_make_request_checks().  blkcg_bio_issue_check() is now the
only function which tries to create missing blkg's.  The subsequent
policy and request_list operations just perform blkg_lookup() and if
missing falls back to the root.

* blk_get_rl() no longer tries to create blkg.  It uses blkg_lookup()
  instead of blkg_lookup_create().

* blk_throtl_bio() is now called from blkcg_bio_issue_check() with rcu
  read locked and blkg already looked up.  Both throtl_lookup_tg() and
  throtl_lookup_create_tg() are dropped.

* cfq is similarly updated.  cfq_lookup_create_cfqg() is replaced with
  cfq_lookup_cfqg()which uses blkg_lookup().

This consolidates blkg handling and avoids unnecessary blkg creation
retries under memory pressure.  In addition, this provides a common
bio entry point into blkcg where things like common accounting can be
performed.

v2: Build fixes for !CONFIG_CFQ_GROUP_IOSCHED and
    !CONFIG_BLK_DEV_THROTTLING.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The way the block layer is currently written, it goes to great lengths
to avoid having to split bios; upper layer code (such as bio_add_page())
checks what the underlying device can handle and tries to always create
bios that don't need to be split.

But this approach becomes unwieldy and eventually breaks down with
stacked devices and devices with dynamic limits, and it adds a lot of
complexity. If the block layer could split bios as needed, we could
eliminate a lot of complexity elsewhere - particularly in stacked
drivers. Code that creates bios can then create whatever size bios are
convenient, and more importantly stacked drivers don't have to deal with
both their own bio size limitations and the limitations of the
(potentially multiple) devices underneath them.  In the future this will
let us delete merge_bvec_fn and a bunch of other code.

We do this by adding calls to blk_queue_split() to the various
make_request functions that need it - a few can already handle arbitrary
size bios. Note that we add the call _after_ any call to
blk_queue_bounce(); this means that blk_queue_split() and
blk_recalc_rq_segments() don't need to be concerned with bouncing
affecting segment merging.

Some make_request_fn() callbacks were simple enough to audit and verify
they don't need blk_queue_split() calls. The skipped ones are:

 * nfhd_make_request (arch/m68k/emu/nfblock.c)
 * axon_ram_make_request (arch/powerpc/sysdev/axonram.c)
 * simdisk_make_request (arch/xtensa/platforms/iss/simdisk.c)
 * brd_make_request (ramdisk - drivers/block/brd.c)
 * mtip_submit_request (drivers/block/mtip32xx/mtip32xx.c)
 * loop_make_request
 * null_queue_bio
 * bcache's make_request fns

Some others are almost certainly safe to remove now, but will be left
for future patches.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Jim Paris <jim@jtan.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: NeilBrown <neilb@suse.de> (for the 'md/md.c' bits)
Acked-by: NMike Snitzer <snitzer@redhat.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
[dpark: skip more mq-based drivers, resolve merge conflicts, etc.]
Signed-off-by: NDongsu Park <dpark@posteo.net>
Signed-off-by: NMing Lin <ming.l@ssi.samsung.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Some places use helpers now, others don't. We only have the 'is set'
helper, add helpers for setting and clearing flags too.

It was a bit of a mess of atomic vs non-atomic access. With
BIO_UPTODATE gone, we don't have any risk of concurrent access to the
flags. So relax the restriction and don't make any of them atomic. The
flags that do have serialization issues (reffed and chained), we
already handle those separately.
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

use FIELD_SIZEOF instead of open coding
Signed-off-by: NManinder Singh <maninder1.s@samsung.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This reverts commit 5f1b670d.

Justification for revert as reported in this dm-devel post:
https://www.redhat.com/archives/dm-devel/2015-June/msg00160.html

this change should not be pushed to mainline yet.

Firstly, Christoph has a newer version of the patch that fixes silent
data corruption problem:
  https://www.redhat.com/archives/dm-devel/2015-May/msg00229.html

And the new version still depends on LLDDs to always complete requests
to the end when error happens, while block API doesn't enforce such a
requirement. If the assumption is ever broken, the inconsistency between
request and bio (e.g. rq->__sector and rq->bio) will cause silent data
corruption:
  https://www.redhat.com/archives/dm-devel/2015-June/msg00022.htmlReported-by: NJunichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Now that bdi layer can handle per-blkcg bdi_writeback_congested state,
blk_{set|clear}_congested() can propagate non-root blkcg congestion
state to them.

This can be easily achieved by disabling the root_rl tests in
blk_{set|clear}_congested().  Note that we still need those tests when
!CONFIG_CGROUP_WRITEBACK as otherwise we'll end up flipping root blkcg
wb's congestion state for events happening on other blkcgs.

v2: Updated for bdi_writeback_congested.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

blk_{set|clear}_queue_congested() take @q and set or clear,
respectively, the congestion state of its bdi's root wb.  Because bdi
used to be able to handle congestion state only on the root wb, the
callers of those functions tested whether the congestion is on the
root blkcg and skipped if not.

This is cumbersome and makes implementation of per cgroup
bdi_writeback congestion state propagation difficult.  This patch
renames blk_{set|clear}_queue_congested() to
blk_{set|clear}_congested(), and makes them take request_list instead
of request_queue and test whether the specified request_list is the
root one before updating bdi_writeback congestion state.  This makes
the tests in the callers unnecessary and simplifies them.

As there are no external users of these functions, the definitions are
moved from include/linux/blkdev.h to block/blk-core.c.

This patch doesn't introduce any noticeable behavior difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

cgroup writeback requires support from both bdi and filesystem sides.
Add BDI_CAP_CGROUP_WRITEBACK and FS_CGROUP_WRITEBACK to indicate
support and enable BDI_CAP_CGROUP_WRITEBACK on block based bdi's by
default.  Also, define CONFIG_CGROUP_WRITEBACK which is enabled if
both MEMCG and BLK_CGROUP are enabled.

inode_cgwb_enabled() which determines whether a given inode's both bdi
and fs support cgroup writeback is added.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bdi->state into wb.

* enum bdi_state is renamed to wb_state and the prefix of all enums is
  changed from BDI_ to WB_.

* Explicit zeroing of bdi->state is removed without adding zeoring of
  wb->state as the whole data structure is zeroed on init anyway.

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->state are mechanically replaced with bdi->wb.state
  introducing no behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: drbd-dev@lists.linbit.com
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

cgroup aware writeback support will require exposing some of blkcg
details.  In preprataion, move block/blk-cgroup.h to
include/linux/blk-cgroup.h.  This patch is pure file move.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Currently dm-multipath has to clone the bios for every request sent
to the lower devices, which wastes cpu cycles and ties down memory.

This patch instead adds a new REQ_CLONE flag that instructs req_bio_endio
to not complete bios attached to a request, which we set on clone
requests similar to bios in a flush sequence.  With this change I/O
errors on a path failure only get propagated to dm-multipath, which
can then either resubmit the I/O or complete the bios on the original
request.

I've done some basic testing of this on a Linux target with ALUA support,
and it survives path failures during I/O nicely.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

With commit ff36ab34 ("dm: remove request-based logic from
make_request_fn wrapper") DM no longer calls blk_queue_bio() directly,
so remove its export.  Doing so required a forward declaration in
blk-core.c.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Last patch makes plug work for multiple queue case. However it only
works for single disk case, because it assumes only one request in the
plug list. If a task is accessing multiple disks, eg MD/DM, the
assumption is wrong. Let blk_attempt_plug_merge() record request from
the same queue.

V2: use NULL parameter in !mq case. Fix a bug. Add comments in
blk_attempt_plug_merge to make it less (hopefully) confusion.

Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>