Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 01 11月, 2011 1 次提交
  3. 27 7月, 2011 2 次提交
  5. 23 7月, 2011 5 次提交
  7. 22 7月, 2011 7 次提交
  9. 21 7月, 2011 1 次提交
  11. 17 7月, 2011 1 次提交
  13. 09 7月, 2011 1 次提交
  15. 06 7月, 2011 1 次提交
    • R
      PCI / PM: Detect early wakeup in pci_pm_prepare() · eea3fc03
      由 Rafael J. Wysocki 提交于 
      A subsequent patch is going to move the invocation of
pm_runtime_barrier() from dpm_prepare() to __device_suspend().
Consequently, early wakeup events resulting from runtime resume
requests for wakeup devices queued up right before system suspend
will only be detected after all of the subsystem-level .prepare()
callbacks have run.  However, the PCI bus type calls
pm_runtime_get_sync() from its pci_pm_prepare() callback routine,
so it would destroy the early wakeup events information regarding PCI
devices.  To prevent this from happening add an early wakeup
detection mechanism, analogous to the one currently in dpm_prepare(),
to pci_pm_prepare().
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      eea3fc03
  17. 29 6月, 2011 1 次提交
    • M
      PCIe ASPM: forcedly -> forcibly · 8072ba1b
      由 Michael Witten 提交于 
      Merriam-Webster tells us that the word exists. However ...

  * Google suggests `forcibly' because it doesn't recognize `forcedly'.
  * Google lists 494 thousand results for `forcedly'.
  * Google lists 13.7 million results for `forcibly'.
  * Linus's repo contains  1 occurrence  of `forcedly' ( 0 after my change).
  * Linus's repo contains 60 occurrences of `forcibly' (61 after my change).
Signed-off-by: NMichael Witten <mfwitten@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      8072ba1b
  19. 22 6月, 2011 1 次提交
    • R
      PCI / PM: Block races between runtime PM and system sleep · a5f76d5e
      由 Rafael J. Wysocki 提交于 
      After commit e8665002
(PM: Allow pm_runtime_suspend() to succeed during system suspend) it
is possible that a device resumed by the pm_runtime_resume(dev) in
pci_pm_prepare() will be suspended immediately from a work item,
timer function or otherwise, defeating the very purpose of calling
pm_runtime_resume(dev) from there.  To prevent that from happening
it is necessary to increment the runtime PM usage counter of the
device by replacing pm_runtime_resume() with pm_runtime_get_sync().
Moreover, the incremented runtime PM usage counter has to be
decremented by the corresponding pci_pm_complete(), via
pm_runtime_put_sync().
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      a5f76d5e
  21. 21 6月, 2011 1 次提交
    • O
      x86/ia64: intel-iommu: move to drivers/iommu/ · 166e9278
      由 Ohad Ben-Cohen 提交于 
      This should ease finding similarities with different platforms,
with the intention of solving problems once in a generic framework
which everyone can use.

Note: to move intel-iommu.c, the declaration of pci_find_upstream_pcie_bridge()
has to move from drivers/pci/pci.h to include/linux/pci.h. This is handled
in this patch, too.

As suggested, also drop DMAR's EXPERIMENTAL tag while we're at it.

Compile-tested on x86_64.
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
      166e9278
  23. 19 6月, 2011 1 次提交
  25. 14 6月, 2011 1 次提交
  27. 10 6月, 2011 1 次提交
  29. 08 6月, 2011 2 次提交
  31. 03 6月, 2011 1 次提交
  33. 02 6月, 2011 1 次提交
  35. 01 6月, 2011 10 次提交
    • D
      intel-iommu: Fix off-by-one in RMRR setup · 70e535d1
      由 David Woodhouse 提交于 
      We were mapping an extra byte (and hence usually an extra page):
iommu_prepare_identity_map() expects to be given an 'end' argument which
is the last byte to be mapped; not the first byte *not* to be mapped.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      70e535d1
    • M
      intel-iommu: Add domain check in domain_remove_one_dev_info · 8519dc44
      由 Mike Habeck 提交于 
      The comment in domain_remove_one_dev_info() states "No need to compare
PCI domain; it has to be the same". But for the si_domain that isn't
going to be true, as it consists of all the PCI devices that are
identity mapped thus multiple PCI domains can be in si_domain.  The
code needs to validate the PCI domain too.
Signed-off-by: NMike Habeck <habeck@sgi.com>
Signed-off-by: NMike Travis <travis@sgi.com>
Cc: stable@kernel.org
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      8519dc44
    • M
      intel-iommu: Remove Host Bridge devices from identity mapping · 825507d6
      由 Mike Travis 提交于 
      When using the 1:1 (identity) PCI DMA remapping, PCI Host Bridge devices
that do not use the IOMMU causes a kernel panic.  Fix that by not
inserting those devices into the si_domain.
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NMike Habeck <habeck@sgi.com>
Cc: stable@kernel.org
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      825507d6
    • M
      intel-iommu: Use coherent DMA mask when requested · c681d0ba
      由 Mike Travis 提交于 
      The __intel_map_single function is not honoring the passed in DMA mask.
This results in not using the coherent DMA mask when called from
intel_alloc_coherent().
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NChris Wright <chrisw@sous-sol.org>
Reviewed-by: NMike Habeck <habeck@sgi.com>
Cc: stable@kernel.org
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      c681d0ba
    • C
      intel-iommu: Dont cache iova above 32bit · 1c9fc3d1
      由 Chris Wright 提交于 
      Mike Travis and Mike Habeck reported an issue where iova allocation
would return a range that was larger than a device's dma mask.

https://lkml.org/lkml/2011/3/29/423

The dmar initialization code will reserve all PCI MMIO regions and copy
those reservations into a domain specific iova tree.  It is possible for
one of those regions to be above the dma mask of a device.  It is typical
to allocate iovas with a 32bit mask (despite device's dma mask possibly
being larger) and cache the result until it exhausts the lower 32bit
address space.  Freeing the iova range that is >= the last iova in the
lower 32bit range when there is still an iova above the 32bit range will
corrupt the cached iova by pointing it to a region that is above 32bit.
If that region is also larger than the device's dma mask, a subsequent
allocation will return an unusable iova and cause dma failure.

Simply don't cache an iova that is above the 32bit caching boundary.
Reported-by: NMike Travis <travis@sgi.com>
Reported-by: NMike Habeck <habeck@sgi.com>
Cc: stable@kernel.org
Acked-by: NMike Travis <travis@sgi.com>
Tested-by: NMike Habeck <habeck@sgi.com>
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      1c9fc3d1
    • M
      intel-iommu: Speed up processing of the identity_mapping function · cb452a40
      由 Mike Travis 提交于 
      When there are a large count of PCI devices, and the pass through
option for iommu is set, much time is spent in the identity_mapping
function hunting though the iommu domains to check if a specific
device is "identity mapped".

Speed up the function by checking the cached info to see if
it's mapped to the static identity domain.
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NMike Habeck <habeck@sgi.com>
Cc: stable@kernel.org
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      cb452a40
    • C
      intel-iommu: Check for identity mapping candidate using system dma mask · 8fcc5372
      由 Chris Wright 提交于 
      The identity mapping code appears to make the assumption that if the
devices dma_mask is greater than 32bits the device can use identity
mapping.  But that is not true: take the case where we have a 40bit
device in a 44bit architecture. The device can potentially receive a
physical address that it will truncate and cause incorrect addresses
to be used.

Instead check to see if the device's dma_mask is large enough
to address the system's dma_mask.
Signed-off-by: NMike Travis <travis@sgi.com>
Reviewed-by: NMike Habeck <habeck@sgi.com>
Cc: stable@kernel.org
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      8fcc5372
    • A
      intel-iommu: Only unlink device domains from iommu · 9b4554b2
      由 Alex Williamson 提交于 
      Commit a97590e5 added unlinking domains from iommus to reciprocate the
iommu from domains unlinking that was already done.  We actually want
to only do this for device domains and never for the static
identity map domain or VM domains.  The SI domain is special and
never freed, while VM domain->id lives in their own special address
space, separate from iommu->domain_ids.

In the current code, a VM can get domain->id zero, then mark that
domain unused when unbound from pci-stub.  This leads to DMAR
write faults when the device is re-bound to the host driver.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      9b4554b2
    • Y
      intel-iommu: Enable super page (2MiB, 1GiB, etc.) support · 6dd9a7c7
      由 Youquan Song 提交于 
      There are no externally-visible changes with this. In the loop in the
internal __domain_mapping() function, we simply detect if we are mapping:
  - size >= 2MiB, and
  - virtual address aligned to 2MiB, and
  - physical address aligned to 2MiB, and
  - on hardware that supports superpages.

(and likewise for larger superpages).

We automatically use a superpage for such mappings. We never have to
worry about *breaking* superpages, since we trust that we will always
*unmap* the same range that was mapped. So all we need to do is ensure
that dma_pte_clear_range() will also cope with superpages.

Adjust pfn_to_dma_pte() to take a superpage 'level' as an argument, so
it can return a PTE at the appropriate level rather than always
extending the page tables all the way down to level 1. Again, this is
simplified by the fact that we should never encounter existing small
pages when we're creating a mapping; any old mapping that used the same
virtual range will have been entirely removed and its obsolete page
tables freed.

Provide an 'intel_iommu=sp_off' argument on the command line as a
chicken bit. Not that it should ever be required.

==

The original commit seen in the iommu-2.6.git was Youquan's
implementation (and completion) of my own half-baked code which I'd
typed into an email. Followed by half a dozen subsequent 'fixes'.

I've taken the unusual step of rewriting history and collapsing the
original commits in order to keep the main history simpler, and make
life easier for the people who are going to have to backport this to
older kernels. And also so I can give it a more coherent commit comment
which (hopefully) gives a better explanation of what's going on.

The original sequence of commits leading to identical code was:

Youquan Song (3):
      intel-iommu: super page support
      intel-iommu: Fix superpage alignment calculation error
      intel-iommu: Fix superpage level calculation error in dma_pfn_level_pte()

David Woodhouse (4):
      intel-iommu: Precalculate superpage support for dmar_domain
      intel-iommu: Fix hardware_largepage_caps()
      intel-iommu: Fix inappropriate use of superpages in __domain_mapping()
      intel-iommu: Fix phys_pfn in __domain_mapping for sglist pages
Signed-off-by: NYouquan Song <youquan.song@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
      6dd9a7c7
    • D
      PCI: Fix warning in drivers/pci/probe.c on sparc64 · 5aceca9d
      由 David S. Miller 提交于 
      IO_SPACE_LIMIT is currently used in two ways:

1) As a way to mask I/O port values read out of PCI base address
   registers.  This value should be 64-bit.

2) As a value which is the upper limit for all I/O "ports" in the
   system.

On sparc64 we store the full 64-bit physical I/O address in the
resources.  For this reason we define IO_SPACE_LIMIT at a 64-bit
"all 1's".

This is the right value to use for ioport_resource.end and for the
check made in drivers/pcmcia/rsrc_nonstatic.c:adjust_io().

But in driver/pci/probe.c:__pci_read_base() we mask this against
a "u32" variable and thus get the following warning:

drivers/pci/probe.c: In function ¡__pci_read_base¢:
drivers/pci/probe.c:207: warning: large integer implicitly truncated to unsigned type

Fix this by using an explicit "u32" cast.

I considered changing sparc64 to define a 32-bit "all 1's" like
most other systems do, but this wouldn't work because the checks
in PCMCIA's rsrc_nonstatic.c would no longer be right since they
are testing against fully formed 64-bit resources.  As described
above, on sparc64 such resources will hold full 64-bit physical
I/O addresses, not bus-centric 32-bit ones.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
      5aceca9d
  37. 29 5月, 2011 1 次提交