- 15 10月, 2008 40 次提交
-
-
由 Mohammed Gamal 提交于
This patch modifies mode switching and vmentry function in order to drive invalid guest state emulation. Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Mohammed Gamal 提交于
This adds the invalid guest state handler function which invokes the x86 emulator until getting the guest to a VMX-friendly state. [avi: leave atomic context if scheduling] [guillaume: return to atomic context correctly] Signed-off-by: NLaurent Vivier <laurent.vivier@bull.net> Signed-off-by: NGuillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Mohammed Gamal 提交于
The patch adds the module parameter required to enable emulating invalid guest state, as well as the emulation_required flag used to drive emulation whenever needed. Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Mohammed Gamal 提交于
This patch adds functions to check whether guest state is VMX compliant. Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Amit Shah 提交于
Even though we don't share irqs at the moment, we should ensure regular user processes don't try to allocate system resources. We check for capability to access IO devices (CAP_SYS_RAWIO) before we request_irq on behalf of the guest. Noticed by Avi. Signed-off-by: NAmit Shah <amit.shah@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Spurious acks can be generated, for example if the PIC is being reset. Handle those acks gracefully rather than flooding the log with warnings. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
The irq ack during pic reset has three problems: - Ignores slave/master PIC, using gsi 0-8 for both. - Generates an ACK even if the APIC is in control. - Depends upon IMR being clear, which is broken if the irq was masked at the time it was generated. The last one causes the BIOS to hang after the first reboot of Windows installation, since PIT interrupts stop. [avi: fix check whether pic interrupts are seen by cpu] Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
The vcpu thread can be preempted after the guest_debug_pre() callback, resulting in invalid debug registers on the new vcpu. Move it inside the non-preemptable section. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Ben-Ami Yassour 提交于
Remove unused field: struct kvm_assigned_pci_dev assigned_dev from struct: struct kvm_assigned_dev_kernel Signed-off-by: NBen-Ami Yassour <benami@il.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Sheng Yang 提交于
Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Dave Hansen 提交于
We're in a hot path. We can't use kmalloc() because it might impact performance. So, we just stick the buffer that we need into the kvm_vcpu_arch structure. This is used very often, so it is not really a waste. We also have to move the buffer structure's definition to the arch-specific x86 kvm header. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Dave Hansen 提交于
[sheng: fix KVM_GET_LAPIC using wrong size] Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Dave Hansen 提交于
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Dave Hansen 提交于
On my machine with gcc 3.4, kvm uses ~2k of stack in a few select functions. This is mostly because gcc fails to notice that the different case: statements could have their stack usage combined. It overflows very nicely if interrupts happen during one of these large uses. This patch uses two methods for reducing stack usage. 1. dynamically allocate large objects instead of putting on the stack. 2. Use a union{} member for all of the case variables. This tricks gcc into combining them all into a single stack allocation. (There's also a comment on this) Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Ben-Ami Yassour 提交于
Based on a patch from: Amit Shah <amit.shah@qumranet.com> This patch adds support for handling PCI devices that are assigned to the guest. The device to be assigned to the guest is registered in the host kernel and interrupt delivery is handled. If a device is already assigned, or the device driver for it is still loaded on the host, the device assignment is failed by conveying a -EBUSY reply to the userspace. Devices that share their interrupt line are not supported at the moment. By itself, this patch will not make devices work within the guest. The VT-d extension is required to enable the device to perform DMA. Another alternative is PVDMA. Signed-off-by: NAmit Shah <amit.shah@qumranet.com> Signed-off-by: NBen-Ami Yassour <benami@il.ibm.com> Signed-off-by: NWeidong Han <weidong.han@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Ben-Ami Yassour 提交于
Userspace may specify memory slots that are backed by mmio pages rather than normal RAM. In some cases it is not enough to identify these mmio pages by pfn_valid(). This patch adds checking the PageReserved as well. Signed-off-by: NBen-Ami Yassour <benami@il.ibm.com> Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Glauber Costa 提交于
We're currently facing timing problems in guests that do calibration under heavy load, and then the load vanishes. This means we'll have a much lower lpj than we actually should, and delays end up taking less time than they should, which is a nasty bug. Solution is to pass on the lpj value from host to guest, and have it preset. Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Glauber Costa 提交于
KVM intends to use paravirt code to calibrate khz. Xen current code will do just fine. So as a first step, factor out code to pvclock.c. Signed-off-by: NGlauber Costa <gcosta@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
The PIT injection logic is problematic under the following cases: 1) If there is a higher priority vector to be delivered by the time kvm_pit_timer_intr_post is invoked ps->inject_pending won't be set. This opens the possibility for missing many PIT event injections (say if guest executes hlt at this point). 2) ps->inject_pending is racy with more than two vcpus. Since there's no locking around read/dec of pt->pending, two vcpu's can inject two interrupts for a single pt->pending count. Fix 1 by using an irq ack notifier: only reinject when the previous irq has been acked. Fix 2 with appropriate locking around manipulation of pending count and irq_ack by the injection / ack paths. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Marcelo Tosatti 提交于
Based on a patch from: Ben-Ami Yassour <benami@il.ibm.com> which was based on a patch from: Amit Shah <amit.shah@qumranet.com> Notify IRQ acking on PIC/APIC emulation. The previous patch missed two things: - Edge triggered interrupts on IOAPIC - PIC reset with IRR/ISR set should be equivalent to ack (LAPIC probably needs something similar). Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> CC: Amit Shah <amit.shah@qumranet.com> CC: Ben-Ami Yassour <benami@il.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This can be used by kvm subsystems that are interested in when interrupts are acked, for example time drift compensation. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Hollis Blanchard 提交于
When we use TID=N userspace mappings, we must ensure that kernel mappings have been destroyed when entering userspace. Using TID=1/TID=0 for kernel/user mappings and running userspace with PID=0 means that userspace can't access the kernel mappings, but the kernel can directly access userspace. The net is that we don't need to flush the TLB on privilege switches, but we do on guest context switches (which are far more infrequent). Guest boot time performance improvement: about 30%. Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Hollis Blanchard 提交于
Track which TLB entries need to be written, instead of overwriting everything below the high water mark. Typically only a single guest TLB entry will be modified in a single exit. Guest boot time performance improvement: about 15%. Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Hollis Blanchard 提交于
We're saving the host TLB state to memory on every exit, but never using it. Originally I had thought that we'd want to restore host TLB for heavyweight exits, but that could actually hurt when context switching to an unrelated host process (i.e. not qemu). Since this decreases the performance penalty of all exits, this patch improves guest boot time by about 15%. Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Hollis Blanchard 提交于
Allow host userspace to program hardware debug registers to set breakpoints inside guests. Signed-off-by: NJerone Young <jyoung5@us.ibm.com> Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Alexander Graf 提交于
Netware writes to DEBUGCTL and reads from the DEBUGCTL and LAST*IP MSRs without further checks and is really confused to receive a #GP during that. To make it happy we should just make them stubs, which is exactly what SVM already does. Writes to DEBUGCTL that are vendor-specific are resembled to behave as if the virtual CPU does not know them. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Usually HOST_RSP retains its value across guest entries. Take advantage of this and avoid a vmwrite() when this is so. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Christian Ehrhardt 提交于
This patch adds a trace point for the instruction emulation on embedded powerpc utilizing the KVM_TRACE interface. Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jerone Young 提交于
This patch adds trace points to track powerpc TLB activities using the KVM_TRACE infrastructure. Signed-off-by: NJerone Young <jyoung5@us.ibm.com> Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jerone Young 提交于
This patch enables KVM_TRACE to build for PowerPC arch. This means just adding sections to Kconfig and Makefile. Signed-off-by: NJerone Young <jyoung5@us.ibm.com> Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Christian Ehrhardt 提交于
The current kvmtrace code uses get_cycles() while the interpretation would be easier using using nanoseconds. ktime_get() should give at least the same accuracy as get_cycles on all architectures (even better on 32bit archs) but at a better unit (e.g. comparable between hosts with different frequencies. [avi: avoid ktime_t in public header] Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Christian Ehrhardt 提交于
This patch fixes kvmtrace use on big endian systems. When using bit fields the compiler will lay data out in the wrong order expected when laid down into a file. This fixes it by using one variable instead of using bit fields. Signed-off-by: NJerone Young <jyoung5@us.ibm.com> Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jan Kiszka 提交于
As we execute real mode guests in VM86 mode, exception have to be reinjected appropriately when the guest triggered them. For this purpose the patch adopts the real-mode injection pattern used in vmx_inject_irq to vmx_queue_exception, additionally taking care that the IP is set correctly for #BP exceptions. Furthermore it extends handle_rmode_exception to reinject all those exceptions that can be raised in real mode. This fixes the execution of himem.exe from FreeDOS and also makes its debug.com work properly. Note that guest debugging in real mode is broken now. This has to be fixed by the scheduled debugging infrastructure rework (will be done once base patches for QEMU have been accepted). Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@web.de> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Mohammed Gamal 提交于
Since checking for vcpu->arch.rmode.active is already done whenever we call handle_rmode_exception(), checking it inside the function is redundant. Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-