Some VIA codecs like VT1702 provide the input-route only to specific
ADCs such as digital-mic inputs.  These routes aren't covered by the
normal primary ADC, and for now, user had to open the capture stream
assigned to that special ADC manually for using such inputs.

This patch implements a way to switch the current ADC dynamically per
the input-source selection in such a case.  When this workaround is
activated, the driver provides only one capture stream and one input-
source control but with the full possible inputs.  The driver switches
the ADC to be used (or being used) according to the input-source on the
fly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When smart51 mode is enabled, auto-mute these surround outputs
as well as the primary line-out.  Also this patch includes minor
clean-ups.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Unify the VT1709 10ch and 6ch parsers, as well as VT1708B 8ch and 4ch
parsers.  They have no difference now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The codecs like VT1708 needs more complicated routing using the mixer
widget rather than the simple selector widgets.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The surround/CLFE/side DACs on VT1708B and co have no amp but the
connected selector widgets have the amp instead.  Fix the parser to
check these selector widgets for the possible mixer controls as well.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the check of the multiple loopback-mixer, which gave sometimes
a wrong index assigned to an element even for different names, e.g.
Mic and Front Mic.  Now check the label properly for avoid duplication.
Reported-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The input jacks assigned as the smart51 outputs must be in the same
stack, either rear, front or other.  Also, prefer line-in as the surround
to mic-in.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Re-route the whole output path when HP-independent mode is changed.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix a issue to create playback volume control if pin has amplifier capability
but not DAC.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change the order of the output-path list in a way from the DAC to the
target pin.  Also now the list include the target pin, too.

Together with this format change, simplify the arguments of
parse_output_path() function, and fix the initialization in
via_auto_init_output().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Drop "Capture" prefix from the mic-boost names.
Otherwise some control names can overflow the max name length.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Create a master volume and mute control of playback for VT1718S.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When switch HP independent mode, mute/unmute connctions of mixer  which is
connected to headphone for VT1718S.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove some invalid initial verbs and correct some wrong initial verbs
for VT1718S codec.
Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use the existing aa-loop list for simplifying the check for analog
low-current mode.  Also fix the stream count test for playback streams.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There is no longer virtual kmixer element for NID mapping.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the primary output is the speaker output, rather name it as
"Speaker".  This will be more intuitive.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Create loopback list dynamically from the parsed input pins for VIA
codecs instead of the fixed arrays.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the broken detection of smart51 and its handling.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now let's add the missing Master control to VIA codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Issue the init verbs of unsolicited events dynamically from the parsed
results for VIA codecs.  Also, consolidate the unsol handlers for HP
and line-out mutes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Similarly like the previous commit, initialize the input-paths dynamically
from the parsed results instead of the fixed array for VIA codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of fixed array for each codec type, initialize the output path
dynamically from the parsed results.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix races in handling of HP DAC and independent streams for VIA codecs.
Also, allow the HP output path without front-DAC, and removed
unnecessary activation of HP mixer elements.

This also removes the handling of shared side/HP stream; it's anyway
implemented in a broken way, so we need to re-implement the feature
later...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now all codecs use the same parser-path, so we can reduce into a single
auto-parser function.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of ignoring the invalid pin configuration, return the error.
This will avoid unexpected crash, anyway.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Create capture-related mixer elements dynamically from the parsed
ADCs and input-pins instead of fixed values for each codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of using the secondary substream, create an individual PCM
stream for HP-independent PCM.  Otherwise it's difficult to handle
different channel numbers with multi-channel stream in the sam PCM
stream structure.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Unify PCM streams for all codecs by assigning the NID dynamically.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For VIA codecs, we shouldn't create a substream for independent HP mode,
when no individual HP DAC is found.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Parse the output-paths more dynamically, i.e. traverse the paths
from each output pin instead of fixed assignment for each codec.
Now all codecs are using the same output parser code.

The smart51 setup doesn't work with this change, and will be fixed
in the next commits.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now storing the analog-mixer widget in spec, we can simplify the rest
parts.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Muting all line-outs and/or speakers is more common in other drivers,
so we should follow it, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Mute the outputs via pin-controls instead of amps for the auto-mute
handling.  This makes our life easier as it avoids conflict of the states
between the mixer elements and the auto-mute toggles.

With this change, we can use vmaster for the master control easily now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reduces lots of static strings.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No functional change.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The jack-detect control should be created at the time of build_controls
callback instead of calling snd_hda_add_ctls() at the tree-parsing time.
For that, copy the control to the temporary array like other cases.

Also, fixed typos of vt1708_jack_detect in all places.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>