- 08 3月, 2015 2 次提交
-
-
由 Boris BREZILLON 提交于
With multi platform support those sections could lead to unexpected behavior if both ARCH_AT91 and another ARM SoC using the MACB IP are selected. Add two new capabilities to encode the default MII mode and the presence of a CLKEN bit in USRIO register. Then define the appropriate config for IPs embedded in at91 SoCs. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Boris BREZILLON 提交于
Some at91 SoCs embed a 10/100 Mbit Ethernet IP, that is based on the at91sam9260 SoC. Fix at91 DTs accordingly. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2015 38 次提交
-
-
由 Scott Feldman 提交于
Signed-off-by: NScott Feldman <sfeldma@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Scott Feldman 提交于
Signed-off-by: NScott Feldman <sfeldma@gmail.com> Reviewed-by: NJonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Fengguang reported, that on openrisc and avr32 architectures, we get the following linker errors on *_defconfig builds that have no bpf syscall support: net/built-in.o:(.rodata+0x1cd0): undefined reference to `bpf_map_lookup_elem_proto' net/built-in.o:(.rodata+0x1cd4): undefined reference to `bpf_map_update_elem_proto' net/built-in.o:(.rodata+0x1cd8): undefined reference to `bpf_map_delete_elem_proto' Fix it up by providing built-in weak definitions of the symbols, so they can be overridden when the syscall is enabled. I think the issue might be that gcc is not able to optimize all that away. This patch fixes the linker errors for me, tested with Fengguang's make.cross [1] script. [1] https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.crossReported-by: NFengguang Wu <fengguang.wu@intel.com> Fixes: d4052c4a ("ebpf: remove CONFIG_BPF_SYSCALL ifdefs in socket filter code") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Some drivers use copybreak to copy tiny frames into smaller skb, and this smaller skb might not have skb->head_frag set for various reasons. skb_gro_receive() currently doesn't allow to aggregate the smaller skb into the previous GRO packet if this GRO packet has at least 2 MSS in it. Following workload easily demonstrates the problem. netperf -t TCP_RR -H target -- -r 3000,3000 (tcpdump shows one GRO packet with 2 MSS, plus one additional packet of 104 bytes that should have been appended.) It turns out that we can remove code from skb_gro_receive(), because commit 8a29111c ("net: gro: allow to build full sized skb") and its followups removed the assumption that a GRO packet with a frag_list had to have an empty head. Removing this code allows the aggregation of the last (incomplete) frame in some RPC workloads. Note that tcp_gro_receive() already takes care of forcing a flush if necessary, including this case. If we want to avoid using frag_list in the first place (in forwarding workloads for example, as the outgoing NIC is generally not able to cope with skbs having a frag_list), we need to address this separately. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We get a static checker warning here on devel kernels: drivers/net/hamradio/mkiss.c:560 ax_xmit() warn: variable dereferenced before check 'skb' (see line 532) It turns out that the NULL check can be deleted. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Or Gerlitz says: ==================== Add QCN support to the DCB NL layer This series from Shani Michaeli adds support for the IEEE QCN attribute to the kernel DCB NL stack, and implementation in the mlx4 driver which programs the firmware according to the admin directives. changes from V0: - applied feedback from John and added his acked-by to patch #1 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shani Michaeli 提交于
Implement the IEEE DCB handlers for set/get QCN parameters and statistics reading per TC. Signed-off-by: NShani Michaeli <shanim@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shani Michaeli 提交于
Add device capability, firmware command opcode and etc prior elements needed for QCN suppprt. Disable SRIOV VF view/access for QCN is disabled. While here, remove a redundant offset definition into the QUERY_DEV_CAP mailbox. Signed-off-by: NShani Michaeli <shanim@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shani Michaeli 提交于
As specified in 802.1Qau spec. Add this optional attribute to the DCB netlink layer. To allow for application to use the new attribute, NIC drivers should implement and register the callbacks ieee_getqcn, ieee_setqcn and ieee_getqcnstats. The QCN attribute holds a set of parameters for management, and a set of statistics to provide informative data on Congestion-Control defined by this spec. Signed-off-by: NShani Michaeli <shanim@mellanox.com> Signed-off-by: NShachar Raindel <raindel@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Alexander Duyck says: ==================== The rest of the FIB patches (add key_vector to fib_table) This patch series is the rest of what I had originally planned for this kernel release. It adds a structure called key_vector which is embedded within every tnode, leaf, and the trie root itself. By doing this we can navigate from any point within the trie to any other point fairly quickly and avoiding NULL pointer checks in the case of a backtrace. As a result we can pipeline things a bit further since we don't have to worry about dereferencing NULL in a backtrace. This can amount to significant savings on a long backtrace. I decided to drop the up-level code as that conflicts with combining the main and local tries. I have one patch as an RFC that currently combines the tries however it still needs some work as we have to split the local and main tries in the event of custom rules being defined. As such we are probably going to be doing some more hacking on fib_table_flush_external as that will also need to flush the local entries from the main trie and place them back in the local trie. v2: Rebased on the switchdev FIB offload work ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change makes it so that the root of the trie contains a key_vector, by doing this we make room to essentially collapse the entire trie by at least one cache line as we can store the information about the tnode or leaf that is pointed to in the root. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change pulls the parent pointer from the key_vector and places it in the tnode structure. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This pulls the information about the child array out of the key_vector and places it in the tnode since that is where it is needed. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
RCU is only needed once for the entire node, not once per key_vector so we can pull that out and move it to the tnode structure. In addition add accessors to be used inside the RCU functions so that we can more easily get from the key vector to either the tnode or the trie pointers. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change pulls the fields not explicitly needed in the key_vector and placed them in the new tnode structure. By doing this we will eventually be able to reduce the key_vector down to 16 bytes on 64 bit systems, and 12 bytes on 32 bit systems. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
We are now checking the length of a key_vector instead of a tnode so it makes sense to probably just rename this to child_length since it would probably even be applicable to a leaf. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
I am replacing the tnode_get_child call with get_child since we are techically pulling the child out of a key_vector now and not a tnode. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Rename the tnode to key_vector. The key_vector will be the eventual container for all of the information needed by either a leaf or a tnode. The final result should be much smaller than the 40 bytes currently needed for either one. This also updates the trie struct so that it contains an array of size 1 of tnode pointers. This is to bring the structure more inline with how an actual tnode itself is configured. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Resize related functions now all return a pointer to the pointer that references the object that was resized. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change just does a couple of minor cleanups on fib_table_flush_external. Specifically it addresses the fact that resize was being called even though nothing was being removed from the table, and it drops an unecessary indent since we could just call continue on the inverse of the fi && flag check. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
ZynqMP soc has single interrupt for all the queue events. So, passing the IRQF_SHARED flag for interrupt registration call. Signed-off-by: NPunnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Include multi queue support for the ethernet IP version in xilinx ZynqMP SoC. Signed-off-by: NPunnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-next-for-davem-2015-03-06' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Major changes: brcmfmac: * sdio improvements * add a debugfs file so users can provide us all the revinfo we could ask for iwlwifi: * add triggers for firmware dump collection * remove support for -9.ucode * new statitics API * rate control improvements ath9k: * add per-vif TX power capability * BT coexistance fixes ath10k: * qca6174: enable STA transmit beamforming (TxBF) support * disable multi-vif power save by default bcma: * enable support for PCIe Gen 2 host devices Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
When building without CONFIG_NET_SWITCHDEV, netdev_switch_fib_ipv4_abort is defined in the header file. It must be static inline to avoid build failure at link time. Fixes: 8e05fd71 ("fib: hook IPv4 fib for hardware offload") Signed-off-by: NWillem de Bruijn <willemb@google.com> Acked-by: NScott Feldman <sfeldma@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Shearman 提交于
If the nla length is less than 2 then the nla data could be accessed beyond the accessible bounds. So ensure that the nla is big enough to at least read the via_family before doing so. Replace magic value of 2. Fixes: 03c05665 ("mpls: Basic support for adding and removing routes") Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: NRobert Shearman <rshearma@brocade.com> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Petri Gynther says: ==================== net: bcmgenet: preparation for multiple Rx queues Three small patches in preparation for supporting multiple Rx queues: 1. set hw_params->rx_queues = 0 2. adjust the call to alloc_etherdev_mqs() 3. add GENET_Q16_RX_BD_CNT and hw_params->rx_bds_per_q ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petri Gynther 提交于
In preparation for supporting multiple Rx queues, add GENET_Q16_RX_BD_CNT and hw_params->rx_bds_per_q. Signed-off-by: NPetri Gynther <pgynther@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petri Gynther 提交于
In preparation for supporting multiple Rx queues, adjust the call to alloc_etherdev_mqs() to allow max GENET_MAX_MQ_CNT + 1 Rx queues. The actual number of Rx queues in use is correctly adjusted with: netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1); Signed-off-by: NPetri Gynther <pgynther@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petri Gynther 提交于
bcmgenet driver doesn't yet support multiple Rx queues. Set hw_params->rx_queues = 0 accordingly. The default Rx queue (Q16) is still created and operational. Signed-off-by: NPetri Gynther <pgynther@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-03-06 This series contains updates to e1000, e1000e and igb. Yanir provides updates to e1000e based on the patches provided by John Linville. First updates the code comment to better describe the changes and the impact on the driver. Second removed calls to ioremap/unmap for i219 since this is only relevant to older hardware only. Starting with i219, the NVM will not be mapped to its one BAR but to a address region in another bar. Alex Duyck provides two fixes for igb, first fixes a compile warning where a variable may be used uninitialized, so Alex initializes it. Second fixes an issue where all of the pin register values were having to be pushed onto the stack each time the function was called, so to avoid this, Alex made them static const so that they should only need to be allocated once and we can avoid all the instructions to get them onto the stack. Eliezer found an issue in e1000 where we needed to be calling netif_carrier_off earlier in the down() to prevent the stack from queuing more packets to the interface. Sabrina Dubroca resolved a potential race condition by adding a dummy allocator. There was a race condition between e1000_change_mtu() cleanups and netpoll, when changing the MTU across jumbo sizes. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Fan Du says: ==================== Improvements for TCP PMTU This patchset performs some improvements and enhancement for current TCP PMTU as per RFC4821 with the aim to find optimal mms size quickly, and also be adaptive to route changes like enlarged path MTU. Then TCP PMTU could be used to probe a effective pmtu in absence of ICMP message for tunnels(e.g. vxlan) across different networking stack. Patch1/4: Set probe mss base to 1024 Bytes per RFC4821 Patch2/4: Do not double probe_size for each probing, use a simple binary search to gain maximum performance. mss for next probing. Patch3/4: Create a probe timer to detect enlarged path MTU. Patch4/4: Update ip-sysctl.txt for new sysctl knobs. Changelog: v5: - Zero probe_size before resetting search range. - Update ip-sysctl.txt for new sysctl knobs. v4: - Convert probe_size to mss, not directly from search_low/high - Clamp probe_threshold - Don't adjust search_high in blackhole probe, so drop orignal patch3 v3: - Update commit message for patch2 - Fix pseudo timer delta calculation in patch4 v2: - Introduce sysctl_tcp_probe_threshold to control when probing will stop, as suggested by John Heffner. - Add patch3 to shrink current mss value for search low boundary. - Drop cannonical timer usages, implements pseudo timer based on 32bits jiffies tcp_time_stamp, as suggested by Eric Dumazet. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fan Du 提交于
Namely tcp_probe_interval to control how often to restart a probe. And tcp_probe_threshold to control when stop the probing in respect to the width of search range in bytes Signed-off-by: NFan Du <fan.du@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fan Du 提交于
As per RFC4821 7.3. Selecting Probe Size, a probe timer should be armed once probing has converged. Once this timer expired, probing again to take advantage of any path PMTU change. The recommended probing interval is 10 minutes per RFC1981. Probing interval could be sysctled by sysctl_tcp_probe_interval. Eric Dumazet suggested to implement pseudo timer based on 32bits jiffies tcp_time_stamp instead of using classic timer for such rare event. Signed-off-by: NFan Du <fan.du@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fan Du 提交于
Current probe_size is chosen by doubling mss_cache, the probing process will end shortly with a sub-optimal mss size, and the link mtu will not be taken full advantage of, in return, this will make user to tweak tcp_base_mss with care. Use binary search to choose probe_size in a fine granularity manner, an optimal mss will be found to boost performance as its maxmium. In addition, introduce a sysctl_tcp_probe_threshold to control when probing will stop in respect to the width of search range. Test env: Docker instance with vxlan encapuslation(82599EB) iperf -c 10.0.0.24 -t 60 before this patch: 1.26 Gbits/sec After this patch: increase 26% 1.59 Gbits/sec Signed-off-by: NFan Du <fan.du@intel.com> Acked-by: NJohn Heffner <johnwheffner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fan Du 提交于
Quotes from RFC4821 7.2. Selecting Initial Values It is RECOMMENDED that search_low be initially set to an MTU size that is likely to work over a very wide range of environments. Given today's technologies, a value of 1024 bytes is probably safe enough. The initial value for search_low SHOULD be configurable. Moreover, set a small value will introduce extra time for the search to converge. So set the initial probe base mss size to 1024 Bytes. Signed-off-by: NFan Du <fan.du@intel.com> Acked-by: NJohn Heffner <johnwheffner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Other users users of the neighbour table use neigh->output as the method to decided when and which link-layer header to place on a packet. DECnet has been using neigh->output to decide which DECnet headers to place on a packet depending which neighbour the packet is destined for. The DECnet usage isn't totally wrong but it can run into problems if the neighbour output function is run for a second time as the teql driver and the bridge netfilter code can do. Therefore to avoid pathologic problems later down the line and make the neighbour code easier to understand by refactoring the decnet output code to only use a neighbour method to add a link layer header to a packet. This is done by moving the neigbhour operations lookup from dn_to_neigh_output to dn_neigh_output_packet. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mahesh Bandewar 提交于
This patches implements the poll_controller support for all bonding driver. If the slaves have poll_controller net_op defined, this implementation calls them. This is mode agnostic implementation and iterates through all slaves (based on mode) and calls respective handler. Signed-off-by: NMahesh Bandewar <maheshb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Scott Feldman 提交于
Signed-off-by: NScott Feldman <sfeldma@gmail.com> Acked-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-