1. 15 6月, 2018 6 次提交
    • J
      kexec: yield to scheduler when loading kimage segments · a8311f64
      Jarrett Farnitano 提交于
      Without yielding while loading kimage segments, a large initrd will
      block all other work on the CPU performing the load until it is
      completed.  For example loading an initrd of 200MB on a low power single
      core system will lock up the system for a few seconds.
      
      To increase system responsiveness to other tasks at that time, call
      cond_resched() in both the crash kernel and normal kernel segment
      loading loops.
      
      I did run into a practical problem.  Hardware watchdogs on embedded
      systems can have short timers on the order of seconds.  If the system is
      locked up for a few seconds with only a single core available, the
      watchdog may not be pet in a timely fashion.  If this happens, the
      hardware watchdog will fire and reset the system.
      
      This really only becomes a problem when you are working with a single
      core, a decently sized initrd, and have a constrained hardware watchdog.
      
      Link: http://lkml.kernel.org/r/1528738546-3328-1-git-send-email-jmf@amazon.comSigned-off-by: NJarrett Farnitano <jmf@amazon.com>
      Reviewed-by: N"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a8311f64
    • S
      mm: fix race between kmem_cache destroy, create and deactivate · 92ee383f
      Shakeel Butt 提交于
      The memcg kmem cache creation and deactivation (SLUB only) is
      asynchronous.  If a root kmem cache is destroyed whose memcg cache is in
      the process of creation or deactivation, the kernel may crash.
      
      Example of one such crash:
      	general protection fault: 0000 [#1] SMP PTI
      	CPU: 1 PID: 1721 Comm: kworker/14:1 Not tainted 4.17.0-smp
      	...
      	Workqueue: memcg_kmem_cache kmemcg_deactivate_workfn
      	RIP: 0010:has_cpu_slab
      	...
      	Call Trace:
      	? on_each_cpu_cond
      	__kmem_cache_shrink
      	kmemcg_cache_deact_after_rcu
      	kmemcg_deactivate_workfn
      	process_one_work
      	worker_thread
      	kthread
      	ret_from_fork+0x35/0x40
      
      To fix this race, on root kmem cache destruction, mark the cache as
      dying and flush the workqueue used for memcg kmem cache creation and
      deactivation.  SLUB's memcg kmem cache deactivation also includes RCU
      callback and thus make sure all previous registered RCU callbacks have
      completed as well.
      
      [shakeelb@google.com: handle the RCU callbacks for SLUB deactivation]
        Link: http://lkml.kernel.org/r/20180611192951.195727-1-shakeelb@google.com
      [shakeelb@google.com: add more documentation, rename fields for readability]
        Link: http://lkml.kernel.org/r/20180522201336.196994-1-shakeelb@google.com
      [akpm@linux-foundation.org: fix build, per Shakeel]
      [shakeelb@google.com: v3.  Instead of refcount, flush the workqueue]
        Link: http://lkml.kernel.org/r/20180530001204.183758-1-shakeelb@google.com
      Link: http://lkml.kernel.org/r/20180521174116.171846-1-shakeelb@google.comSigned-off-by: NShakeel Butt <shakeelb@google.com>
      Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: Greg Thelen <gthelen@google.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Tejun Heo <tj@kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      92ee383f
    • D
      mm: fix devmem_is_allowed() for sub-page System RAM intersections · 2bdce744
      Dan Williams 提交于
      Hussam reports:
      
          I was poking around and for no real reason, I did cat /dev/mem and
          strings /dev/mem.  Then I saw the following warning in dmesg. I saved it
          and rebooted immediately.
      
           memremap attempted on mixed range 0x000000000009c000 size: 0x1000
           ------------[ cut here ]------------
           WARNING: CPU: 0 PID: 11810 at kernel/memremap.c:98 memremap+0x104/0x170
           [..]
           Call Trace:
            xlate_dev_mem_ptr+0x25/0x40
            read_mem+0x89/0x1a0
            __vfs_read+0x36/0x170
      
      The memremap() implementation checks for attempts to remap System RAM
      with MEMREMAP_WB and instead redirects those mapping attempts to the
      linear map.  However, that only works if the physical address range
      being remapped is page aligned.  In low memory we have situations like
      the following:
      
          00000000-00000fff : Reserved
          00001000-0009fbff : System RAM
          0009fc00-0009ffff : Reserved
      
      ...where System RAM intersects Reserved ranges on a sub-page page
      granularity.
      
      Given that devmem_is_allowed() special cases any attempt to map System
      RAM in the first 1MB of memory, replace page_is_ram() with the more
      precise region_intersects() to trap attempts to map disallowed ranges.
      
      Link: https://bugzilla.kernel.org/show_bug.cgi?id=199999
      Link: http://lkml.kernel.org/r/152856436164.18127.2847888121707136898.stgit@dwillia2-desk3.amr.corp.intel.com
      Fixes: 92281dee ("arch: introduce memremap()")
      Signed-off-by: NDan Williams <dan.j.williams@intel.com>
      Reported-by: NHussam Al-Tayeb <me@hussam.eu.org>
      Tested-by: NHussam Al-Tayeb <me@hussam.eu.org>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      2bdce744
    • D
      mm/swapfile.c: fix swap_count comment about nonexistent SWAP_HAS_CONT · 955c97f0
      Daniel Jordan 提交于
      Commit 570a335b ("swap_info: swap count continuations") introduces
      COUNT_CONTINUED but refers to it incorrectly as SWAP_HAS_CONT in a
      comment in swap_count.  Fix it.
      
      Link: http://lkml.kernel.org/r/20180612175919.30413-1-daniel.m.jordan@oracle.com
      Fixes: 570a335b ("swap_info: swap count continuations")
      Signed-off-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
      Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
      Cc: "Huang, Ying" <ying.huang@intel.com>
      Cc: Hugh Dickins <hughd@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      955c97f0
    • R
      mm: fix null pointer dereference in mem_cgroup_protected · df2a4196
      Roman Gushchin 提交于
      Shakeel reported a crash in mem_cgroup_protected(), which can be triggered
      by memcg reclaim if the legacy cgroup v1 use_hierarchy=0 mode is used:
      
        BUG: unable to handle kernel NULL pointer dereference at 0000000000000120
        PGD 8000001ff55da067 P4D 8000001ff55da067 PUD 1fdc7df067 PMD 0
        Oops: 0000 [#4] SMP PTI
        CPU: 0 PID: 15581 Comm: bash Tainted: G      D 4.17.0-smp-clean #5
        Hardware name: ...
        RIP: 0010:mem_cgroup_protected+0x54/0x130
        Code: 4c 8b 8e 00 01 00 00 4c 8b 86 08 01 00 00 48 8d 8a 08 ff ff ff 48 85 d2 ba 00 00 00 00 48 0f 44 ca 48 39 c8 0f 84 cf 00 00 00 <48> 8b 81 20 01 00 00 4d 89 ca 4c 39 c8 4c 0f 46 d0 4d 85 d2 74 05
        RSP: 0000:ffffabe64dfafa58 EFLAGS: 00010286
        RAX: ffff9fb6ff03d000 RBX: ffff9fb6f5b1b000 RCX: 0000000000000000
        RDX: 0000000000000000 RSI: ffff9fb6f5b1b000 RDI: ffff9fb6f5b1b000
        RBP: ffffabe64dfafb08 R08: 0000000000000000 R09: 0000000000000000
        R10: 0000000000000000 R11: 000000000000c800 R12: ffffabe64dfafb88
        R13: ffff9fb6f5b1b000 R14: ffffabe64dfafb88 R15: ffff9fb77fffe000
        FS:  00007fed1f8ac700(0000) GS:ffff9fb6ff400000(0000) knlGS:0000000000000000
        CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
        CR2: 0000000000000120 CR3: 0000001fdcf86003 CR4: 00000000001606f0
        Call Trace:
         ? shrink_node+0x194/0x510
         do_try_to_free_pages+0xfd/0x390
         try_to_free_mem_cgroup_pages+0x123/0x210
         try_charge+0x19e/0x700
         mem_cgroup_try_charge+0x10b/0x1a0
         wp_page_copy+0x134/0x5b0
         do_wp_page+0x90/0x460
         __handle_mm_fault+0x8e3/0xf30
         handle_mm_fault+0xfe/0x220
         __do_page_fault+0x262/0x500
         do_page_fault+0x28/0xd0
         ? page_fault+0x8/0x30
         page_fault+0x1e/0x30
        RIP: 0033:0x485b72
      
      The problem happens because parent_mem_cgroup() returns a NULL pointer,
      which is dereferenced later without a check.
      
      As cgroup v1 has no memory guarantee support, let's make
      mem_cgroup_protected() immediately return MEMCG_PROT_NONE, if the given
      cgroup has no parent (non-hierarchical mode is used).
      
      Link: http://lkml.kernel.org/r/20180611175418.7007-2-guro@fb.com
      Fixes: bf8d5d52 ("memcg: introduce memory.min")
      Signed-off-by: NRoman Gushchin <guro@fb.com>
      Reported-by: NShakeel Butt <shakeelb@google.com>
      Tested-by: NShakeel Butt <shakeelb@google.com>
      Tested-by: NJohn Stultz <john.stultz@linaro.org>
      Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
      Acked-by: NMichal Hocko <mhocko@kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      df2a4196
    • J
      mm/ksm.c: ignore STABLE_FLAG of rmap_item->address in rmap_walk_ksm() · 1105a2fc
      Jia He 提交于
      In our armv8a server(QDF2400), I noticed lots of WARN_ON caused by
      PAGE_SIZE unaligned for rmap_item->address under memory pressure
      tests(start 20 guests and run memhog in the host).
      
        WARNING: CPU: 4 PID: 4641 at virt/kvm/arm/mmu.c:1826 kvm_age_hva_handler+0xc0/0xc8
        CPU: 4 PID: 4641 Comm: memhog Tainted: G        W 4.17.0-rc3+ #8
        Call trace:
         kvm_age_hva_handler+0xc0/0xc8
         handle_hva_to_gpa+0xa8/0xe0
         kvm_age_hva+0x4c/0xe8
         kvm_mmu_notifier_clear_flush_young+0x54/0x98
         __mmu_notifier_clear_flush_young+0x6c/0xa0
         page_referenced_one+0x154/0x1d8
         rmap_walk_ksm+0x12c/0x1d0
         rmap_walk+0x94/0xa0
         page_referenced+0x194/0x1b0
         shrink_page_list+0x674/0xc28
         shrink_inactive_list+0x26c/0x5b8
         shrink_node_memcg+0x35c/0x620
         shrink_node+0x100/0x430
         do_try_to_free_pages+0xe0/0x3a8
         try_to_free_pages+0xe4/0x230
         __alloc_pages_nodemask+0x564/0xdc0
         alloc_pages_vma+0x90/0x228
         do_anonymous_page+0xc8/0x4d0
         __handle_mm_fault+0x4a0/0x508
         handle_mm_fault+0xf8/0x1b0
         do_page_fault+0x218/0x4b8
         do_translation_fault+0x90/0xa0
         do_mem_abort+0x68/0xf0
         el0_da+0x24/0x28
      
      In rmap_walk_ksm, the rmap_item->address might still have the
      STABLE_FLAG, then the start and end in handle_hva_to_gpa might not be
      PAGE_SIZE aligned.  Thus it will cause exceptions in handle_hva_to_gpa
      on arm64.
      
      This patch fixes it by ignoring (not removing) the low bits of address
      when doing rmap_walk_ksm.
      
      IMO, it should be backported to stable tree.  the storm of WARN_ONs is
      very easy for me to reproduce.  More than that, I watched a panic (not
      reproducible) as follows:
      
        page:ffff7fe003742d80 count:-4871 mapcount:-2126053375 mapping: (null) index:0x0
        flags: 0x1fffc00000000000()
        raw: 1fffc00000000000 0000000000000000 0000000000000000 ffffecf981470000
        raw: dead000000000100 dead000000000200 ffff8017c001c000 0000000000000000
        page dumped because: nonzero _refcount
        CPU: 29 PID: 18323 Comm: qemu-kvm Tainted: G W 4.14.15-5.hxt.aarch64 #1
        Hardware name: <snip for confidential issues>
        Call trace:
          dump_backtrace+0x0/0x22c
          show_stack+0x24/0x2c
          dump_stack+0x8c/0xb0
          bad_page+0xf4/0x154
          free_pages_check_bad+0x90/0x9c
          free_pcppages_bulk+0x464/0x518
          free_hot_cold_page+0x22c/0x300
          __put_page+0x54/0x60
          unmap_stage2_range+0x170/0x2b4
          kvm_unmap_hva_handler+0x30/0x40
          handle_hva_to_gpa+0xb0/0xec
          kvm_unmap_hva_range+0x5c/0xd0
      
      I even injected a fault on purpose in kvm_unmap_hva_range by seting
      size=size-0x200, the call trace is similar as above.  So I thought the
      panic is similarly caused by the root cause of WARN_ON.
      
      Andrea said:
      
      : It looks a straightforward safe fix, on x86 hva_to_gfn_memslot would
      : zap those bits and hide the misalignment caused by the low metadata
      : bits being erroneously left set in the address, but the arm code
      : notices when that's the last page in the memslot and the hva_end is
      : getting aligned and the size is below one page.
      :
      : I think the problem triggers in the addr += PAGE_SIZE of
      : unmap_stage2_ptes that never matches end because end is aligned but
      : addr is not.
      :
      : 	} while (pte++, addr += PAGE_SIZE, addr != end);
      :
      : x86 again only works on hva_start/hva_end after converting it to
      : gfn_start/end and that being in pfn units the bits are zapped before
      : they risk to cause trouble.
      
      Jia He said:
      
      : I've tested by myself in arm64 server (QDF2400,46 cpus,96G mem) Without
      : this patch, the WARN_ON is very easy for reproducing.  After this patch, I
      : have run the same benchmarch for a whole day without any WARN_ONs
      
      Link: http://lkml.kernel.org/r/1525403506-6750-1-git-send-email-hejianet@gmail.comSigned-off-by: NJia He <jia.he@hxt-semitech.com>
      Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
      Tested-by: NJia He <hejianet@gmail.com>
      Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
      Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
      Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1105a2fc
  2. 14 6月, 2018 6 次提交
    • L
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 2837461d
      Linus Torvalds 提交于
      Pull SCSI fixes from James Bottomley:
       "This is a set of minor (and safe changes) that didn't make the initial
        pull request plus some bug fixes"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        scsi: qla2xxx: Mask off Scope bits in retry delay
        scsi: qla2xxx: Fix crash on qla2x00_mailbox_command
        scsi: aic7xxx: aic79xx: fix potential null pointer dereference on ahd
        scsi: mpt3sas: Add an I/O barrier
        scsi: qla2xxx: Fix setting lower transfer speed if GPSC fails
        scsi: hpsa: disable device during shutdown
        scsi: sd_zbc: Fix sd_zbc_check_zone_size() error path
        scsi: aacraid: remove bogus GFP_DMA32 specifies
      2837461d
    • L
      Merge tag 'platform-drivers-x86-v4.18-1' of git://git.infradead.org/linux-platform-drivers-x86 · f3b5020e
      Linus Torvalds 提交于
      Pull x86 platform driver updates from Darren Hart:
       "Several incremental improvements including new keycodes, new models,
        new quirks, and related documentation. Adds LED platform driver
        activation for Mellanox systems. Some minor optimizations and
        cleanups. Includes several bug fixes, message silencing, mostly minor
      
        Automated summary:
      
        acer-wmi:
         -  add another KEY_POWER keycode
      
        apple-gmux:
         -  fix gmux_get_client_id()'s return type
      
        asus-laptop:
         -  Simplify getting .drvdata
      
        asus-wireless:
         -  Fix format specifier
      
        dell-laptop:
         -  Fix keyboard backlight timeout on XPS 13 9370
      
        dell-smbios:
         -  Match on www.dell.com in OEM strings too
      
        dell-wmi:
         -  Ignore new rfkill and fn-lock events
         -  Set correct keycode for Fn + left arrow
      
        fujitsu-laptop:
         -  Simplify soft key handling
      
        ideapad-laptop:
         -  Add E42-80 to no_hw_rfkill
         -  Add fn-lock setting
         -  Add MIIX 720-12IKB to no_hw_rfkill
      
        lib/string_helpers:
         -  Add missed declaration of struct task_struct
      
        intel_scu_ipc:
         -  Replace mdelay with usleep_range in intel_scu_ipc_i2c_cntrl
      
        mlx-platform:
         -  Add LED platform driver activation
      
        platform/mellanox:
         -  Add new ODM system types to mlx-platform
         -  mlxreg-hotplug: add extra cycle for hotplug work queue
         -  mlxreg-hotplug: Document fixes for hotplug private data
      
        platform_data/mlxreg:
         -  Document fixes for hotplug device
      
        silead_dmi:
         -  Add entry for Chuwi Hi8 tablet touchscreen
         -  Add touchscreen info for the Onda V891w tablet
         -  Add info for the PoV mobii TAB-P800W (v2.0)
         -  Add touchscreen info for the Jumper EZpad 6 Pro
      
        thinkpad_acpi:
         -  silence false-positive-prone pr_warn
         -  do not report thermal sensor state for tablet mode switch
         -  silence HKEY 0x6032, 0x60f0, 0x6030"
      
      * tag 'platform-drivers-x86-v4.18-1' of git://git.infradead.org/linux-platform-drivers-x86: (30 commits)
        platform/x86: silead_dmi: Add entry for Chuwi Hi8 tablet touchscreen
        platform/x86: dell-laptop: Fix keyboard backlight timeout on XPS 13 9370
        platform/x86: dell-wmi: Ignore new rfkill and fn-lock events
        platform/x86: mlx-platform: Add LED platform driver activation
        platform/mellanox: Add new ODM system types to mlx-platform
        platform/mellanox: mlxreg-hotplug: add extra cycle for hotplug work queue
        platform/x86: ideapad-laptop: Add E42-80 to no_hw_rfkill
        platform/x86: silead_dmi: Add touchscreen info for the Onda V891w tablet
        platform/x86: silead_dmi: Add info for the PoV mobii TAB-P800W (v2.0)
        platform/x86: silead_dmi: Add touchscreen info for the Jumper EZpad 6 Pro
        platform/x86: asus-wireless: Fix format specifier
        platform/x86: asus-wmi: Fix NULL pointer dereference
        platform/x86: dell-wmi: Set correct keycode for Fn + left arrow
        platform/x86: acer-wmi: add another KEY_POWER keycode
        platform/x86: ideapad-laptop: Add fn-lock setting
        platform/x86: ideapad-laptop: Add MIIX 720-12IKB to no_hw_rfkill
        lib/string_helpers: Add missed declaration of struct task_struct
        platform/x86: DELL_WMI use depends on instead of select for DELL_SMBIOS
        platform/mellanox: mlxreg-hotplug: Document fixes for hotplug private data
        platform_data/mlxreg: Document fixes for hotplug device
        ...
      f3b5020e
    • L
      Merge tag 'pwm/for-4.18-rc1' of... · 4b4bb99b
      Linus Torvalds 提交于
      Merge tag 'pwm/for-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
      
      Pull pwm updates from Thierry Reding:
       "This contains a couple of fixes and cleanups for the Meson and
        ACPI/LPSS drivers as well as capture support for STM32.
      
        Note that given the cross- subsystem changes, the STM32 patches were
        merged through the MFD and PWM trees, both sharing an immutable
        branch"
      
      * tag 'pwm/for-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
        pwm: stm32: Fix build warning with CONFIG_DMA_ENGINE disabled
        pwm: stm32: Enforce dependency on CONFIG_MFD_STM32_TIMERS
        ACPI / LPSS: Add missing prv_offset setting for byt/cht PWM devices
        pwm: lpss: platform: Save/restore the ctrl register over a suspend/resume
        dt-bindings: mfd: stm32-timers: Add support for dmas
        pwm: simplify getting .drvdata
        pwm: meson: Fix allocation of PWM channel array
      4b4bb99b
    • L
      Merge branch 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · 9bca19a0
      Linus Torvalds 提交于
      Pull i2c updates from Wolfram Sang:
      
       - mainly feature additions to drivers (stm32f7, qup, xlp9xx, mlxcpld, ...)
      
       - conversion to use the i2c_8bit_addr_from_msg macro consistently
      
       - move includes to platform_data
      
       - core updates to allow the (still in review) I3C subsystem to connect
      
       - and the regular share of smaller driver updates
      
      * 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (68 commits)
        i2c: qup: fix building without CONFIG_ACPI
        i2c: tegra: Remove suspend-resume
        i2c: imx-lpi2c: Switch to SPDX identifier
        i2c: mxs: Switch to SPDX identifier
        i2c: busses: make use of i2c_8bit_addr_from_msg
        i2c: algos: make use of i2c_8bit_addr_from_msg
        i2c: rcar: document R8A77980 bindings
        i2c: qup: Add command-line parameter to override SCL frequency
        i2c: qup: Correct duty cycle for FM and FM+
        i2c: qup: Add support for Fast Mode Plus
        i2c: qup: add probe path for Centriq ACPI devices
        i2c: robotfuzz-osif: drop pointless test
        i2c: robotfuzz-osif: remove pointless local variable
        i2c: rk3x: Don't print visible virtual mapping MMIO address
        i2c: opal: don't check number of messages in the driver
        i2c: ibm_iic: don't check number of messages in the driver
        i2c: imx: Switch to SPDX identifier
        i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data
        i2c: mux: demux-pinctrl: use proper parent device for demux adapter
        i2c: mux: improve error message for failed symlink
        ...
      9bca19a0
    • L
      Merge tag 'apparmor-pr-2018-06-13' of... · 463f2021
      Linus Torvalds 提交于
      Merge tag 'apparmor-pr-2018-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
      
      Pull AppArmor updates from John Johansen:
       "Features
         - add support for mapping secids and using secctxes
         - add the ability to get a task's secid
         - add support for audit rule filtering
      
        Cleanups:
         - multiple typo fixes
         - Convert to use match_string() helper
         - update git and wiki locations in AppArmor docs
         - improve get_buffers macro by using get_cpu_ptr
         - Use an IDR to allocate apparmor secids
      
        Bug fixes:
         - fix '*seclen' is never less than zero
         - fix mediation of prlimit
         - fix memory leak when deduping profile load
         - fix ptrace read check
         - fix memory leak of rule on error exit path"
      
      * tag 'apparmor-pr-2018-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (21 commits)
        apparmor: fix ptrace read check
        apparmor: fix memory leak when deduping profile load
        apparmor: fix mediation of prlimit
        apparmor: fixup secid map conversion to using IDR
        apparmor: Use an IDR to allocate apparmor secids
        apparmor: Fix memory leak of rule on error exit path
        apparmor: modify audit rule support to support profile stacks
        apparmor: Add support for audit rule filtering
        apparmor: update git and wiki locations in AppArmor docs
        apparmor: Convert to use match_string() helper
        apparmor: improve get_buffers macro by using get_cpu_ptr
        apparmor: fix '*seclen' is never less than zero
        apparmor: fix typo "preconfinement"
        apparmor: fix typo "independent"
        apparmor: fix typo "traverse"
        apparmor: fix typo "type"
        apparmor: fix typo "replace"
        apparmor: fix typo "comparison"
        apparmor: fix typo "loosen"
        apparmor: add the ability to get a task's secid
        ...
      463f2021
    • L
      Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variables · 050e9baa
      Linus Torvalds 提交于
      The changes to automatically test for working stack protector compiler
      support in the Kconfig files removed the special STACKPROTECTOR_AUTO
      option that picked the strongest stack protector that the compiler
      supported.
      
      That was all a nice cleanup - it makes no sense to have the AUTO case
      now that the Kconfig phase can just determine the compiler support
      directly.
      
      HOWEVER.
      
      It also meant that doing "make oldconfig" would now _disable_ the strong
      stackprotector if you had AUTO enabled, because in a legacy config file,
      the sane stack protector configuration would look like
      
        CONFIG_HAVE_CC_STACKPROTECTOR=y
        # CONFIG_CC_STACKPROTECTOR_NONE is not set
        # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
        # CONFIG_CC_STACKPROTECTOR_STRONG is not set
        CONFIG_CC_STACKPROTECTOR_AUTO=y
      
      and when you ran this through "make oldconfig" with the Kbuild changes,
      it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
      been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
      CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
      used to be disabled (because it was really enabled by AUTO), and would
      disable it in the new config, resulting in:
      
        CONFIG_HAVE_CC_STACKPROTECTOR=y
        CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
        CONFIG_CC_STACKPROTECTOR=y
        # CONFIG_CC_STACKPROTECTOR_STRONG is not set
        CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
      
      That's dangerously subtle - people could suddenly find themselves with
      the weaker stack protector setup without even realizing.
      
      The solution here is to just rename not just the old RECULAR stack
      protector option, but also the strong one.  This does that by just
      removing the CC_ prefix entirely for the user choices, because it really
      is not about the compiler support (the compiler support now instead
      automatially impacts _visibility_ of the options to users).
      
      This results in "make oldconfig" actually asking the user for their
      choice, so that we don't have any silent subtle security model changes.
      The end result would generally look like this:
      
        CONFIG_HAVE_CC_STACKPROTECTOR=y
        CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
        CONFIG_STACKPROTECTOR=y
        CONFIG_STACKPROTECTOR_STRONG=y
        CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
      
      where the "CC_" versions really are about internal compiler
      infrastructure, not the user selections.
      Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      050e9baa
  3. 13 6月, 2018 28 次提交
    • L
      Merge tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild · be779f03
      Linus Torvalds 提交于
      Pull more Kbuild updates from Masahiro Yamada:
      
       - fix some bugs introduced by the recent Kconfig syntax extension
      
       - add some symbols about compiler information in Kconfig, such as
         CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
      
       - test compiler capability for the stack protector in Kconfig, and
         clean-up Makefile
      
       - test compiler capability for GCC-plugins in Kconfig, and clean-up
         Makefile
      
       - allow to enable GCC-plugins for COMPILE_TEST
      
       - test compiler capability for KCOV in Kconfig and correct dependency
      
       - remove auto-detect mode of the GCOV format, which is now more nicely
         handled in Kconfig
      
       - test compiler capability for mprofile-kernel on PowerPC, and clean-up
         Makefile
      
       - misc cleanups
      
      * tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
        linux/linkage.h: replace VMLINUX_SYMBOL_STR() with __stringify()
        kconfig: fix localmodconfig
        sh: remove no-op macro VMLINUX_SYMBOL()
        powerpc/kbuild: move -mprofile-kernel check to Kconfig
        Documentation: kconfig: add recommended way to describe compiler support
        gcc-plugins: disable GCC_PLUGIN_STRUCTLEAK_BYREF_ALL for COMPILE_TEST
        gcc-plugins: allow to enable GCC_PLUGINS for COMPILE_TEST
        gcc-plugins: test plugin support in Kconfig and clean up Makefile
        gcc-plugins: move GCC version check for PowerPC to Kconfig
        kcov: test compiler capability in Kconfig and correct dependency
        gcov: remove CONFIG_GCOV_FORMAT_AUTODETECT
        arm64: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
        kconfig: add CC_IS_CLANG and CLANG_VERSION
        kconfig: add CC_IS_GCC and GCC_VERSION
        stack-protector: test compiler capability in Kconfig and drop AUTO mode
        kbuild: fix endless syncconfig in case arch Makefile sets CROSS_COMPILE
      be779f03
    • L
      Merge tag 'acpi-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · d290ef93
      Linus Torvalds 提交于
      Pull additional ACPI updates from Rafael Wysocki:
       "These update the ACPICA code in the kernel to upstream revision
        20180531 including one important AML parser fix and updates related to
        the IORT table, make the kernel recognize the "Windows 2017.2" _OSI
        string and update the customized methods documentation.
      
        Specifics:
      
         - Update the ACPICA code in the kernel to upstream revision 20180531
           including:
            * AML parser fix to continue loading tables after detecting an AML
              error (Erik Schmauss).
            * AML parser debug option to dump parse trees (Bob Moore).
            * Debugger updates (Bob Moore).
            * Initial bits of Unload () operator deprecation (Bob Moore).
            * Updates related to the IORT table (Robin Murphy).
      
         - Make Linux respond to the "Windows 2017.2" _OSI string which
           allows native Thunderbolt enumeration to be used on Dell systems
           and was unsafe before recent changes in the PCI subsystem (Mario
           Limonciello)
      
         - Update the ACPI method customization feature documentation (Erik
           Schmauss)"
      
      * tag 'acpi-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        ACPICA: Recognize the _OSI string "Windows 2017.2"
        ACPICA: Update version to 20180531
        ACPICA: Interpreter: Begin deprecation of Unload operator
        ACPICA: AML parser: attempt to continue loading table after error
        ACPICA: Debugger: Reduce verbosity for module-level code errors.
        ACPICA: AML Parser: Add debug option to dump parse trees
        ACPICA: Debugger: Add count of namespace nodes after namespace dump
        ACPICA: IORT: Add PMCG node supprt
        ACPICA: IORT: Update for revision D
        ACPI / Documentation: update ACPI customize method feature docs
      d290ef93
    • L
      Merge tag 'pm-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · d09fcecb
      Linus Torvalds 提交于
      Pull more power management updates from Rafael Wysocki:
       "These revert a recent PM core change that introduced a regression, fix
        the build when the recently added Kryo cpufreq driver is selected, add
        support for devices attached to multiple power domains to the generic
        power domains (genpd) framework, add support for iowait boosting on
        systens with hardware-managed P-states (HWP) enabled to the
        intel_pstate driver, modify the behavior of the wakeup_count device
        attribute in sysfs, fix a few issues and clean up some ugliness,
        mostly in cpufreq (core and drivers) and in the cpupower utility.
      
        Specifics:
      
         - Revert a recent PM core change that attempted to fix an issue
           related to device links, but introduced a regression (Rafael
           Wysocki)
      
         - Fix build when the recently added cpufreq driver for Kryo
           processors is selected by making it possible to build that driver
           as a module (Arnd Bergmann)
      
         - Fix the long idle detection mechanism in the out-of-band (ondemand
           and conservative) cpufreq governors (Chen Yu)
      
         - Add support for devices in multiple power domains to the generic
           power domains (genpd) framework (Ulf Hansson)
      
         - Add support for iowait boosting on systems with hardware-managed
           P-states (HWP) enabled to the intel_pstate driver and make it use
           that feature on systems with Skylake Xeon processors as it is
           reported to improve performance significantly on those systems
           (Srinivas Pandruvada)
      
         - Fix and update the acpi_cpufreq, ti-cpufreq and imx6q cpufreq
           drivers (Colin Ian King, Suman Anna, Sébastien Szymanski)
      
         - Change the behavior of the wakeup_count device attribute in sysfs
           to expose the number of events when the device might have aborted
           system suspend in progress (Ravi Chandra Sadineni)
      
         - Fix two minor issues in the cpupower utility (Abhishek Goel, Colin
           Ian King)"
      
      * tag 'pm-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        Revert "PM / runtime: Fixup reference counting of device link suppliers at probe"
        cpufreq: imx6q: check speed grades for i.MX6ULL
        cpufreq: governors: Fix long idle detection logic in load calculation
        cpufreq: intel_pstate: enable boost for Skylake Xeon
        PM / wakeup: Export wakeup_count instead of event_count via sysfs
        PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains
        PM / Domains: Add support for multi PM domains per device to genpd
        PM / Domains: Split genpd_dev_pm_attach()
        PM / Domains: Don't attach devices in genpd with multi PM domains
        PM / Domains: dt: Allow power-domain property to be a list of specifiers
        cpufreq: intel_pstate: New sysfs entry to control HWP boost
        cpufreq: intel_pstate: HWP boost performance on IO wakeup
        cpufreq: intel_pstate: Add HWP boost utility and sched util hooks
        cpufreq: ti-cpufreq: Use devres managed API in probe()
        cpufreq: ti-cpufreq: Fix an incorrect error return value
        cpufreq: ACPI: make function acpi_cpufreq_fast_switch() static
        cpufreq: kryo: allow building as a loadable module
        cpupower : Fix header name to read idle state name
        cpupower: fix spelling mistake: "logilename" -> "logfilename"
      d09fcecb
    • R
      Merge branch 'acpica' · 67445532
      Rafael J. Wysocki 提交于
      ACPICA update to upstream revision 20180531 (including an important
      AML parser fix and updates related to IORT) and a change to start
      responding to the "Windows 2017.2" _OSI string.
      
      * acpica:
        ACPICA: Recognize the _OSI string "Windows 2017.2"
        ACPICA: Update version to 20180531
        ACPICA: Interpreter: Begin deprecation of Unload operator
        ACPICA: AML parser: attempt to continue loading table after error
        ACPICA: Debugger: Reduce verbosity for module-level code errors.
        ACPICA: AML Parser: Add debug option to dump parse trees
        ACPICA: Debugger: Add count of namespace nodes after namespace dump
        ACPICA: IORT: Add PMCG node supprt
        ACPICA: IORT: Update for revision D
      67445532
    • R
      Merge branches 'pm-domains' and 'pm-tools' · 6a900f88
      Rafael J. Wysocki 提交于
      Additional updates of the generic power domains (genpd) framework
      (support for devices attached to multiple domains) and the cpupower
      utility (minor fixes) for 4.18-rc1.
      
      * pm-domains:
        PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains
        PM / Domains: Add support for multi PM domains per device to genpd
        PM / Domains: Split genpd_dev_pm_attach()
        PM / Domains: Don't attach devices in genpd with multi PM domains
        PM / Domains: dt: Allow power-domain property to be a list of specifiers
      
      * pm-tools:
        cpupower : Fix header name to read idle state name
        cpupower: fix spelling mistake: "logilename" -> "logfilename"
      6a900f88
    • R
      Merge branch 'pm-cpufreq' · 2652df3a
      Rafael J. Wysocki 提交于
      Additional cpufreq updates for 4.18-rc1: fixes and cleanups in the
      core and drivers and intel_pstate extension to do iowait boosting
      on systems with HWP that improves performance quite a bit.
      
      * pm-cpufreq:
        cpufreq: imx6q: check speed grades for i.MX6ULL
        cpufreq: governors: Fix long idle detection logic in load calculation
        cpufreq: intel_pstate: enable boost for Skylake Xeon
        cpufreq: intel_pstate: New sysfs entry to control HWP boost
        cpufreq: intel_pstate: HWP boost performance on IO wakeup
        cpufreq: intel_pstate: Add HWP boost utility and sched util hooks
        cpufreq: ti-cpufreq: Use devres managed API in probe()
        cpufreq: ti-cpufreq: Fix an incorrect error return value
        cpufreq: ACPI: make function acpi_cpufreq_fast_switch() static
        cpufreq: kryo: allow building as a loadable module
      2652df3a
    • L
      Revert "debugfs: inode: debugfs_create_dir uses mode permission from parent" · f5b7769e
      Linus Torvalds 提交于
      This reverts commit 95cde3c5.
      
      The commit had good intentions, but it breaks kvm-tool and qemu-kvm.
      
      With it in place, "lkvm run" just fails with
      
        Error: KVM_CREATE_VM ioctl
        Warning: Failed init: kvm__init
      
      which isn't a wonderful error message, but bisection pinpointed the
      problematic commit.
      
      The problem is almost certainly due to the special kvm debugfs entries
      created dynamically by kvm under /sys/kernel/debug/kvm/.  See
      kvm_create_vm_debugfs()
      Bisected-and-reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
      Cc: Wanpeng Li <kernellwp@gmail.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Thomas Richter <tmricht@linux.ibm.com>
      Cc: Kees Cook <keescook@chromium.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f5b7769e
    • L
      KVM: x86: VMX: fix build without hyper-v · dbee3d02
      Linus Torvalds 提交于
      Commit ceef7d10 ("KVM: x86: VMX: hyper-v: Enlightened MSR-Bitmap
      support") broke the build with Hyper-V disabled, because it accesses
      ms_hyperv.nested_features without checking if that exists.
      
      This is the quick-and-hacky build fix.
      
      I suspect the proper fix is to replace the
      
          static_branch_unlikely(&enable_evmcs)
      
      tests with an inline helper function that also checks that CONFIG_HYPERV
      is enabled, since without that, enable_evmcs makes no sense.
      
      But I want a working build environment first and foremost, and I'm upset
      this slipped through in the first place.  My primary build tests missed
      it because I tend to build with everything enabled, but it should have
      been caught in the kvm tree.
      
      Fixes: ceef7d10 ("KVM: x86: VMX: hyper-v: Enlightened MSR-Bitmap support")
      Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      dbee3d02
    • L
      Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux · b08fc527
      Linus Torvalds 提交于
      Pull more overflow updates from Kees Cook:
       "The rest of the overflow changes for v4.18-rc1.
      
        This includes the explicit overflow fixes from Silvio, further
        struct_size() conversions from Matthew, and a bug fix from Dan.
      
        But the bulk of it is the treewide conversions to use either the
        2-factor argument allocators (e.g. kmalloc(a * b, ...) into
        kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
        b) into vmalloc(array_size(a, b)).
      
        Coccinelle was fighting me on several fronts, so I've done a bunch of
        manual whitespace updates in the patches as well.
      
        Summary:
      
         - Error path bug fix for overflow tests (Dan)
      
         - Additional struct_size() conversions (Matthew, Kees)
      
         - Explicitly reported overflow fixes (Silvio, Kees)
      
         - Add missing kvcalloc() function (Kees)
      
         - Treewide conversions of allocators to use either 2-factor argument
           variant when available, or array_size() and array3_size() as needed
           (Kees)"
      
      * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
        treewide: Use array_size in f2fs_kvzalloc()
        treewide: Use array_size() in f2fs_kzalloc()
        treewide: Use array_size() in f2fs_kmalloc()
        treewide: Use array_size() in sock_kmalloc()
        treewide: Use array_size() in kvzalloc_node()
        treewide: Use array_size() in vzalloc_node()
        treewide: Use array_size() in vzalloc()
        treewide: Use array_size() in vmalloc()
        treewide: devm_kzalloc() -> devm_kcalloc()
        treewide: devm_kmalloc() -> devm_kmalloc_array()
        treewide: kvzalloc() -> kvcalloc()
        treewide: kvmalloc() -> kvmalloc_array()
        treewide: kzalloc_node() -> kcalloc_node()
        treewide: kzalloc() -> kcalloc()
        treewide: kmalloc() -> kmalloc_array()
        mm: Introduce kvcalloc()
        video: uvesafb: Fix integer overflow in allocation
        UBIFS: Fix potential integer overflow in allocation
        leds: Use struct_size() in allocation
        Convert intel uncore to struct_size
        ...
      b08fc527
    • L
      Merge tag 'for-4.18/dm-changes-v2' of... · 4597fcff
      Linus Torvalds 提交于
      Merge tag 'for-4.18/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
      
      Pull device mapper updates from Mike Snitzer:
      
       - Adjust various DM structure members to improve alignment relative to
         4.18 block's mempool_t and bioset changes.
      
       - Add DM writecache target that offers writeback caching to persistent
         memory or SSD.
      
       - Small DM core error message change to give context for why a DM table
         type transition wasn't allowed.
      
      * tag 'for-4.18/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
        dm: add writecache target
        dm: adjust structure members to improve alignment
        dm: report which conflicting type caused error during table_load()
      4597fcff
    • K
      treewide: Use array_size in f2fs_kvzalloc() · 9d2a789c
      Kees Cook 提交于
      The f2fs_kvzalloc() function has no 2-factor argument form, so
      multiplication factors need to be wrapped in array_size(). This patch
      replaces cases of:
      
              f2fs_kvzalloc(handle, a * b, gfp)
      
      with:
              f2fs_kvzalloc(handle, array_size(a, b), gfp)
      
      as well as handling cases of:
      
              f2fs_kvzalloc(handle, a * b * c, gfp)
      
      with:
      
              f2fs_kvzalloc(handle, array3_size(a, b, c), gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              f2fs_kvzalloc(handle, 4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      expression HANDLE;
      type TYPE;
      expression THING, E;
      @@
      
      (
        f2fs_kvzalloc(HANDLE,
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression HANDLE;
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        f2fs_kvzalloc(HANDLE,
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      expression HANDLE;
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      expression HANDLE;
      identifier SIZE, COUNT;
      @@
      
        f2fs_kvzalloc(HANDLE,
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression HANDLE;
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression HANDLE;
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      expression HANDLE;
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        f2fs_kvzalloc(HANDLE,
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression HANDLE;
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        f2fs_kvzalloc(HANDLE, C1 * C2 * C3, ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression HANDLE;
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        f2fs_kvzalloc(HANDLE, C1 * C2, ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      9d2a789c
    • K
      treewide: Use array_size() in f2fs_kzalloc() · 026f0507
      Kees Cook 提交于
      The f2fs_kzalloc() function has no 2-factor argument form, so
      multiplication factors need to be wrapped in array_size(). This patch
      replaces cases of:
      
              f2fs_kzalloc(handle, a * b, gfp)
      
      with:
              f2fs_kzalloc(handle, array_size(a, b), gfp)
      
      as well as handling cases of:
      
              f2fs_kzalloc(handle, a * b * c, gfp)
      
      with:
      
              f2fs_kzalloc(handle, array3_size(a, b, c), gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              f2fs_kzalloc(handle, 4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      expression HANDLE;
      type TYPE;
      expression THING, E;
      @@
      
      (
        f2fs_kzalloc(HANDLE,
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression HANDLE;
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        f2fs_kzalloc(HANDLE,
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      expression HANDLE;
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      expression HANDLE;
      identifier SIZE, COUNT;
      @@
      
        f2fs_kzalloc(HANDLE,
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression HANDLE;
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression HANDLE;
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      expression HANDLE;
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        f2fs_kzalloc(HANDLE,
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression HANDLE;
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        f2fs_kzalloc(HANDLE, C1 * C2 * C3, ...)
      |
        f2fs_kzalloc(HANDLE,
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression HANDLE;
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        f2fs_kzalloc(HANDLE, C1 * C2, ...)
      |
        f2fs_kzalloc(HANDLE,
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      026f0507
    • K
      treewide: Use array_size() in f2fs_kmalloc() · c8606593
      Kees Cook 提交于
      The f2fs_kmalloc() function has no 2-factor argument form, so
      multiplication factors need to be wrapped in array_size(). This patch
      replaces cases of:
      
              f2fs_kmalloc(handle, a * b, gfp)
      
      with:
              f2fs_kmalloc(handle, array_size(a, b), gfp)
      
      as well as handling cases of:
      
              f2fs_kmalloc(handle, a * b * c, gfp)
      
      with:
      
              f2fs_kmalloc(handle, array3_size(a, b, c), gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              f2fs_kmalloc(handle, 4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      expression HANDLE;
      type TYPE;
      expression THING, E;
      @@
      
      (
        f2fs_kmalloc(HANDLE,
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression HANDLE;
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        f2fs_kmalloc(HANDLE,
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      expression HANDLE;
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      expression HANDLE;
      identifier SIZE, COUNT;
      @@
      
        f2fs_kmalloc(HANDLE,
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression HANDLE;
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression HANDLE;
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      expression HANDLE;
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        f2fs_kmalloc(HANDLE,
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression HANDLE;
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        f2fs_kmalloc(HANDLE, C1 * C2 * C3, ...)
      |
        f2fs_kmalloc(HANDLE,
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression HANDLE;
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        f2fs_kmalloc(HANDLE, C1 * C2, ...)
      |
        f2fs_kmalloc(HANDLE,
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      c8606593
    • K
      treewide: Use array_size() in sock_kmalloc() · 76e43e37
      Kees Cook 提交于
      The sock_kmalloc() function has no 2-factor argument form, so
      multiplication factors need to be wrapped in array_size(). This patch
      replaces cases of:
      
              sock_kmalloc(handle, a * b, gfp)
      
      with:
              sock_kmalloc(handle, array_size(a, b), gfp)
      
      as well as handling cases of:
      
              sock_kmalloc(handle, a * b * c, gfp)
      
      with:
      
              sock_kmalloc(handle, array3_size(a, b, c), gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              sock_kmalloc(handle, 4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      expression HANDLE;
      type TYPE;
      expression THING, E;
      @@
      
      (
        sock_kmalloc(HANDLE,
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression HANDLE;
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        sock_kmalloc(HANDLE,
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      expression HANDLE;
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      expression HANDLE;
      identifier SIZE, COUNT;
      @@
      
        sock_kmalloc(HANDLE,
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression HANDLE;
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression HANDLE;
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      expression HANDLE;
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        sock_kmalloc(HANDLE,
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression HANDLE;
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        sock_kmalloc(HANDLE, C1 * C2 * C3, ...)
      |
        sock_kmalloc(HANDLE,
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression HANDLE;
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        sock_kmalloc(HANDLE, C1 * C2, ...)
      |
        sock_kmalloc(HANDLE,
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      76e43e37
    • K
      treewide: Use array_size() in kvzalloc_node() · 84ca176b
      Kees Cook 提交于
      The kvzalloc_node() function has no 2-factor argument form, so
      multiplication factors need to be wrapped in array_size(). This patch
      replaces cases of:
      
              kvzalloc_node(a * b, gfp, node)
      
      with:
              kvzalloc_node(array_size(a, b), gfp, node)
      
      as well as handling cases of:
      
              kvzalloc_node(a * b * c, gfp, node)
      
      with:
      
              kvzalloc_node(array3_size(a, b, c), gfp, node)
      
      This does, however, attempt to ignore constant size factors like:
      
              kvzalloc_node(4 * 1024, gfp, node)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kvzalloc_node(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kvzalloc_node(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kvzalloc_node(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        kvzalloc_node(
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
        kvzalloc_node(
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kvzalloc_node(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kvzalloc_node(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kvzalloc_node(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kvzalloc_node(C1 * C2 * C3, ...)
      |
        kvzalloc_node(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        kvzalloc_node(C1 * C2, ...)
      |
        kvzalloc_node(
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      84ca176b
    • K
      treewide: Use array_size() in vzalloc_node() · fd7beced
      Kees Cook 提交于
      The vzalloc_node() function has no 2-factor argument form, so
      multiplication factors need to be wrapped in array_size(). This patch
      replaces cases of:
      
              vzalloc_node(a * b, node)
      
      with:
              vzalloc_node(array_size(a, b), node)
      
      as well as handling cases of:
      
              vzalloc_node(a * b * c, node)
      
      with:
      
              vzalloc_node(array3_size(a, b, c), node)
      
      This does, however, attempt to ignore constant size factors like:
      
              vzalloc_node(4 * 1024, node)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        vzalloc_node(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        vzalloc_node(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        vzalloc_node(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        vzalloc_node(
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
        vzalloc_node(
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        vzalloc_node(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        vzalloc_node(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        vzalloc_node(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        vzalloc_node(C1 * C2 * C3, ...)
      |
        vzalloc_node(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        vzalloc_node(C1 * C2, ...)
      |
        vzalloc_node(
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      fd7beced
    • K
      treewide: Use array_size() in vzalloc() · fad953ce
      Kees Cook 提交于
      The vzalloc() function has no 2-factor argument form, so multiplication
      factors need to be wrapped in array_size(). This patch replaces cases of:
      
              vzalloc(a * b)
      
      with:
              vzalloc(array_size(a, b))
      
      as well as handling cases of:
      
              vzalloc(a * b * c)
      
      with:
      
              vzalloc(array3_size(a, b, c))
      
      This does, however, attempt to ignore constant size factors like:
      
              vzalloc(4 * 1024)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        vzalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        vzalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        vzalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        vzalloc(
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
        vzalloc(
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        vzalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        vzalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        vzalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        vzalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        vzalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        vzalloc(C1 * C2 * C3, ...)
      |
        vzalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        vzalloc(C1 * C2, ...)
      |
        vzalloc(
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      fad953ce
    • K
      treewide: Use array_size() in vmalloc() · 42bc47b3
      Kees Cook 提交于
      The vmalloc() function has no 2-factor argument form, so multiplication
      factors need to be wrapped in array_size(). This patch replaces cases of:
      
              vmalloc(a * b)
      
      with:
              vmalloc(array_size(a, b))
      
      as well as handling cases of:
      
              vmalloc(a * b * c)
      
      with:
      
              vmalloc(array3_size(a, b, c))
      
      This does, however, attempt to ignore constant size factors like:
      
              vmalloc(4 * 1024)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        vmalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        vmalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        vmalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        vmalloc(
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
        vmalloc(
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        vmalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        vmalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        vmalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        vmalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        vmalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        vmalloc(C1 * C2 * C3, ...)
      |
        vmalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        vmalloc(C1 * C2, ...)
      |
        vmalloc(
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      42bc47b3
    • K
      treewide: devm_kzalloc() -> devm_kcalloc() · a86854d0
      Kees Cook 提交于
      The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
      This patch replaces cases of:
      
              devm_kzalloc(handle, a * b, gfp)
      
      with:
              devm_kcalloc(handle, a * b, gfp)
      
      as well as handling cases of:
      
              devm_kzalloc(handle, a * b * c, gfp)
      
      with:
      
              devm_kzalloc(handle, array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              devm_kcalloc(handle, array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              devm_kzalloc(handle, 4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      Some manual whitespace fixes were needed in this patch, as Coccinelle
      really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      expression HANDLE;
      type TYPE;
      expression THING, E;
      @@
      
      (
        devm_kzalloc(HANDLE,
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression HANDLE;
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        devm_kzalloc(HANDLE,
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      expression HANDLE;
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      expression HANDLE;
      identifier SIZE, COUNT;
      @@
      
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression HANDLE;
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression HANDLE;
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      expression HANDLE;
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        devm_kzalloc(HANDLE,
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression HANDLE;
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
      |
        devm_kzalloc(HANDLE,
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression HANDLE;
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
      |
        devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
      |
        devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
      |
        devm_kzalloc(HANDLE, C1 * C2, ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      a86854d0
    • K
      treewide: devm_kmalloc() -> devm_kmalloc_array() · 3c4211ba
      Kees Cook 提交于
      The devm_kmalloc() function has a 2-factor argument form,
      devm_kmalloc_array(). This patch replaces cases of:
      
              devm_kmalloc(handle, a * b, gfp)
      
      with:
              devm_kmalloc_array(handle, a * b, gfp)
      
      as well as handling cases of:
      
              devm_kmalloc(handle, a * b * c, gfp)
      
      with:
      
              devm_kmalloc(handle, array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              devm_kmalloc_array(handle, array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              devm_kmalloc(handle, 4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      Some manual whitespace fixes were needed in this patch, as Coccinelle
      really liked to write "=devm_kmalloc..." instead of "= devm_kmalloc...".
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      expression HANDLE;
      type TYPE;
      expression THING, E;
      @@
      
      (
        devm_kmalloc(HANDLE,
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression HANDLE;
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        devm_kmalloc(HANDLE,
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      expression HANDLE;
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      expression HANDLE;
      identifier SIZE, COUNT;
      @@
      
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression HANDLE;
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression HANDLE;
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      expression HANDLE;
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        devm_kmalloc(HANDLE,
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression HANDLE;
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        devm_kmalloc(HANDLE, C1 * C2 * C3, ...)
      |
        devm_kmalloc(HANDLE,
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression HANDLE;
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        devm_kmalloc(HANDLE, sizeof(THING) * C2, ...)
      |
        devm_kmalloc(HANDLE, sizeof(TYPE) * C2, ...)
      |
        devm_kmalloc(HANDLE, C1 * C2 * C3, ...)
      |
        devm_kmalloc(HANDLE, C1 * C2, ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      3c4211ba
    • K
      treewide: kvzalloc() -> kvcalloc() · 778e1cdd
      Kees Cook 提交于
      The kvzalloc() function has a 2-factor argument form, kvcalloc(). This
      patch replaces cases of:
      
              kvzalloc(a * b, gfp)
      
      with:
              kvcalloc(a * b, gfp)
      
      as well as handling cases of:
      
              kvzalloc(a * b * c, gfp)
      
      with:
      
              kvzalloc(array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              kvcalloc(array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              kvzalloc(4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kvzalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kvzalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kvzalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kvzalloc
      + kvcalloc
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kvzalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvzalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvzalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvzalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kvzalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kvzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kvzalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kvzalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kvzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kvzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kvzalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kvzalloc(C1 * C2 * C3, ...)
      |
        kvzalloc(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kvzalloc(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kvzalloc(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kvzalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kvzalloc(sizeof(THING) * C2, ...)
      |
        kvzalloc(sizeof(TYPE) * C2, ...)
      |
        kvzalloc(C1 * C2 * C3, ...)
      |
        kvzalloc(C1 * C2, ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      778e1cdd
    • K
      treewide: kvmalloc() -> kvmalloc_array() · 344476e1
      Kees Cook 提交于
      The kvmalloc() function has a 2-factor argument form, kvmalloc_array(). This
      patch replaces cases of:
      
              kvmalloc(a * b, gfp)
      
      with:
              kvmalloc_array(a * b, gfp)
      
      as well as handling cases of:
      
              kvmalloc(a * b * c, gfp)
      
      with:
      
              kvmalloc(array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              kvmalloc_array(array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              kvmalloc(4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kvmalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kvmalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kvmalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kvmalloc
      + kvmalloc_array
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kvmalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvmalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvmalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvmalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvmalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvmalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvmalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvmalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kvmalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kvmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kvmalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kvmalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kvmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kvmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kvmalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kvmalloc(C1 * C2 * C3, ...)
      |
        kvmalloc(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kvmalloc(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kvmalloc(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kvmalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kvmalloc(sizeof(THING) * C2, ...)
      |
        kvmalloc(sizeof(TYPE) * C2, ...)
      |
        kvmalloc(C1 * C2 * C3, ...)
      |
        kvmalloc(C1 * C2, ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      344476e1
    • K
      treewide: kzalloc_node() -> kcalloc_node() · 590b5b7d
      Kees Cook 提交于
      The kzalloc_node() function has a 2-factor argument form, kcalloc_node(). This
      patch replaces cases of:
      
              kzalloc_node(a * b, gfp, node)
      
      with:
              kcalloc_node(a * b, gfp, node)
      
      as well as handling cases of:
      
              kzalloc_node(a * b * c, gfp, node)
      
      with:
      
              kzalloc_node(array3_size(a, b, c), gfp, node)
      
      as it's slightly less ugly than:
      
              kcalloc_node(array_size(a, b), c, gfp, node)
      
      This does, however, attempt to ignore constant size factors like:
      
              kzalloc_node(4 * 1024, gfp, node)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kzalloc_node(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kzalloc_node(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kzalloc_node(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kzalloc_node
      + kcalloc_node
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kzalloc_node(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc_node(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc_node(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc_node(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc_node(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc_node(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc_node(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc_node(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kzalloc_node(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kzalloc_node(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kzalloc_node(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kzalloc_node(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kzalloc_node(C1 * C2 * C3, ...)
      |
        kzalloc_node(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc_node(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc_node(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc_node(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kzalloc_node(sizeof(THING) * C2, ...)
      |
        kzalloc_node(sizeof(TYPE) * C2, ...)
      |
        kzalloc_node(C1 * C2 * C3, ...)
      |
        kzalloc_node(C1 * C2, ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      590b5b7d
    • K
      treewide: kzalloc() -> kcalloc() · 6396bb22
      Kees Cook 提交于
      The kzalloc() function has a 2-factor argument form, kcalloc(). This
      patch replaces cases of:
      
              kzalloc(a * b, gfp)
      
      with:
              kcalloc(a * b, gfp)
      
      as well as handling cases of:
      
              kzalloc(a * b * c, gfp)
      
      with:
      
              kzalloc(array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              kzalloc_array(array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              kzalloc(4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kzalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kzalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kzalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kzalloc
      + kcalloc
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kzalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kzalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kzalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kzalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kzalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kzalloc(C1 * C2 * C3, ...)
      |
        kzalloc(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kzalloc(sizeof(THING) * C2, ...)
      |
        kzalloc(sizeof(TYPE) * C2, ...)
      |
        kzalloc(C1 * C2 * C3, ...)
      |
        kzalloc(C1 * C2, ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      6396bb22
    • K
      treewide: kmalloc() -> kmalloc_array() · 6da2ec56
      Kees Cook 提交于
      The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
      patch replaces cases of:
      
              kmalloc(a * b, gfp)
      
      with:
              kmalloc_array(a * b, gfp)
      
      as well as handling cases of:
      
              kmalloc(a * b * c, gfp)
      
      with:
      
              kmalloc(array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              kmalloc_array(array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              kmalloc(4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The tools/ directory was manually excluded, since it has its own
      implementation of kmalloc().
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kmalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kmalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kmalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kmalloc
      + kmalloc_array
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kmalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kmalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kmalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kmalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kmalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kmalloc(C1 * C2 * C3, ...)
      |
        kmalloc(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kmalloc(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kmalloc(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kmalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kmalloc(sizeof(THING) * C2, ...)
      |
        kmalloc(sizeof(TYPE) * C2, ...)
      |
        kmalloc(C1 * C2 * C3, ...)
      |
        kmalloc(C1 * C2, ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: NKees Cook <keescook@chromium.org>
      6da2ec56
    • K
      mm: Introduce kvcalloc() · 1c542f38
      Kees Cook 提交于
      The kv*alloc()-family was missing kvcalloc(). Adding this allows for
      2-argument multiplication conversions of kvzalloc(a * b, ...) into
      kvcalloc(a, b, ...).
      Signed-off-by: NKees Cook <keescook@chromium.org>
      1c542f38
    • K
      video: uvesafb: Fix integer overflow in allocation · 9f645bcc
      Kees Cook 提交于
      cmap->len can get close to INT_MAX/2, allowing for an integer overflow in
      allocation. This uses kmalloc_array() instead to catch the condition.
      Reported-by: NDr Silvio Cesare of InfoSect <silvio.cesare@gmail.com>
      Fixes: 8bdb3a2d ("uvesafb: the driver core")
      Cc: stable@vger.kernel.org
      Signed-off-by: NKees Cook <keescook@chromium.org>
      9f645bcc
    • S
      UBIFS: Fix potential integer overflow in allocation · 353748a3
      Silvio Cesare 提交于
      There is potential for the size and len fields in ubifs_data_node to be
      too large causing either a negative value for the length fields or an
      integer overflow leading to an incorrect memory allocation. Likewise,
      when the len field is small, an integer underflow may occur.
      Signed-off-by: NSilvio Cesare <silvio.cesare@gmail.com>
      Fixes: 1e51764a ("UBIFS: add new flash file system")
      Cc: stable@vger.kernel.org
      Signed-off-by: NKees Cook <keescook@chromium.org>
      353748a3