- 08 11月, 2005 40 次提交
-
-
由 David Woodhouse 提交于
OK, the Fedora ppc32 and ppc64 kernels should both be arch/powerpc by tomorrow. They're booting on G5, POWER5, and my powerbook. I'll test pmac SMP and Pegasos later -- but pmac smp is known broken in arch/ppc anyway, and I'll live with a potential Pegasos regression for now; it wasn't supported officially in FC4 either. I needed to fix ppc32 initrd -- we were never setting initrd_start. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Some manual fixups for clashing kfree() cleanups etc.
-
由 Ladislav Michl 提交于
Second cut of the VINO / Indycam driver for the Silicon Graphics Indy, much more feature complete and bug free.
-
由 Atsushi Nemoto 提交于
Add missing bits to fix D-cache aliasing problem in the PIO IDE driver. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
This reverts 8f91ed6c. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Since 2.6.13-rc1 setup_frame and its variants return int. But some bits were missed in the conversion. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
If HZ was 1000, mdelay(2) cause overflow on multiplication in __udelay. We should define MAX_UDELAY_MS properly to prevent this. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Many RTC routines were not protected against each other, so there are potential races, for example, ntp-update against /dev/rtc. This patch fixes them using rtc_lock. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
The mips_rtc_lock is no longer needed because RTC operations should be protected already by other mechanism. (rtc_lock, local_irq_save, etc.) Also, locking whole rtc_get_time/rtc_set_time should be avoided while some RTC routines might take very long time (a few seconds). Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
-
由 Ralf Baechle 提交于
-
由 Ralf Baechle 提交于
o Switch to dynamic major o Remove duplicate SHN_MIPS_SCOMMON definition o Coding style: remove typedefs. o Coding style: reorder to avoid the need for forward declarations o Use kzalloc. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Adrian Bunk 提交于
"extern inline" doesn't make much sense. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Only a cosmetic fix to make the output of modinfo look readable. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
o Coding style o Race condition on open o Switch to dynamic major o Header file cleanup Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Linus Torvalds 提交于
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Greg Ungerer 提交于
Move some of the m68knommu platform specific irq core support to its own header, irqnode.h. Having it in asm-m68knommu/irq.h causes some build pain, since it is included in a number of common code places (and not all the required definitions will be included at these places). Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add support for the new 5208 ColdFire (Matt Waddel / Mike Lavender) Patch originally from Matt Waddel (from code originally written by Mike Lavender). I also re-ordered the init code to avoid interrupt lockups on some platforms (at least the 5275, but others have reported it on the 5235 as well). Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add support for the new 5208 ColdFire in the FEC ethernet header. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Enable the ColdFire 5249 cache support code - it should have been on. Also one more change of "extern inline" to "static inline". Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Added support for the new Freescale 5208 ColdFire processor. Also changed name "Motorola" to new company name "Freescale". Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add support for the Freescale 5208 processor UART's to the common ColdFire serial port code. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Align the param section. It can end up starting on an unalingned boundary depending on the size of ksymtab_strings. If it is unaligned things like modules will fail to load with unaligned access traps. Add linker scipt support for the M5208EVB board. Patch originally from Matt Waddel. Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
The Freescale M5208EVB ColdFire eval board is one of the few that doesn't have its DRAM based at address 0. Handle this special case in the common ColdFire startup code. Patch originally from Matt Waddel. Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Modified common ColdFire PIT timer code to support the 5208 as well. It uses a different set of mask and interrupt bits than other ColdFire processors. The defines for these bits have been moved in header files and set appropriately for the different processor varients. Patch originally from Matt Waddel. Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Platform configuration code for the Freescale 5208 ColdFire processor. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add build support for the new Freescale 5208 ColdFire processor, and its M5208EVB eval board. Patch originally from Matt Waddel. Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
The INFTL mount code contains a kmalloc() followed by a memset() without handling a possible memory allocation failure. Signed-off-by: <panagiotis.issaris@mech.kuleuven.ac.be> Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
The Freescale 5208 ColdFire uses the common PIT timer code for its internal timer. Build it when configured for the 5208 processor. Add support for the internal register map of the 5208 ColdFire fmaily. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Ungerer 提交于
Add Freescale 5208 ColdFire platform Makefile. Patch originally from Matt Waddel (from code originally written by Mike Lavender). Signed-off-by: NGreg Ungerer <gerg@uclinux.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-