- 09 6月, 2019 23 次提交
-
-
由 Filipe Manana 提交于
commit 60d9f50308e5df19bc18c2fefab0eba4a843900a upstream. While logging an inode we follow its ancestors and for each one we mark it as logged in the current transaction, even if we have not logged it. As a consequence if we change an attribute of an ancestor, such as the UID or GID for example, and then explicitly fsync it, we end up not logging the inode at all despite returning success to user space, which results in the attribute being lost if a power failure happens after the fsync. Sample reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/dir $ chown 6007:6007 /mnt/dir $ sync $ chown 9003:9003 /mnt/dir $ touch /mnt/dir/file $ xfs_io -c fsync /mnt/dir/file # fsync our directory after fsync'ing the new file, should persist the # new values for the uid and gid. $ xfs_io -c fsync /mnt/dir <power failure> $ mount /dev/sdb /mnt $ stat -c %u:%g /mnt/dir 6007:6007 --> should be 9003:9003, the uid and gid were not persisted, despite the explicit fsync on the directory prior to the power failure Fix this by not updating the logged_trans field of ancestor inodes when logging an inode, since we have not logged them. Let only future calls to btrfs_log_inode() to mark inodes as logged. This could be triggered by my recent fsync fuzz tester for fstests, for which an fstests patch exists titled "fstests: generic, fsync fuzz tester with fsstress". Fixes: 12fcfd22 ("Btrfs: tree logging unlink/rename fixes") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Filipe Manana 提交于
commit 06989c799f04810f6876900d4760c0edda369cf7 upstream. When syncing the log, the final phase of a fsync operation, we need to either create a log root's item or update the existing item in the log tree of log roots, and that depends on the current value of the log root's log_transid - if it's 1 we need to create the log root item, otherwise it must exist already and we update it. Since there is no synchronization between updating the log_transid and checking it for deciding whether the log root's item needs to be created or updated, we end up with a tiny race window that results in attempts to update the item to fail because the item was not yet created: CPU 1 CPU 2 btrfs_sync_log() lock root->log_mutex set log root's log_transid to 1 unlock root->log_mutex btrfs_sync_log() lock root->log_mutex sets log root's log_transid to 2 unlock root->log_mutex update_log_root() sees log root's log_transid with a value of 2 calls btrfs_update_root(), which fails with -EUCLEAN and causes transaction abort Until recently the race lead to a BUG_ON at btrfs_update_root(), but after the recent commit 7ac1e464c4d47 ("btrfs: Don't panic when we can't find a root key") we just abort the current transaction. A sample trace of the BUG_ON() on a SLE12 kernel: ------------[ cut here ]------------ kernel BUG at ../fs/btrfs/root-tree.c:157! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=2048 NUMA pSeries (...) Supported: Yes, External CPU: 78 PID: 76303 Comm: rtas_errd Tainted: G X 4.4.156-94.57-default #1 task: c00000ffa906d010 ti: c00000ff42b08000 task.ti: c00000ff42b08000 NIP: d000000036ae5cdc LR: d000000036ae5cd8 CTR: 0000000000000000 REGS: c00000ff42b0b860 TRAP: 0700 Tainted: G X (4.4.156-94.57-default) MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 22444484 XER: 20000000 CFAR: d000000036aba66c SOFTE: 1 GPR00: d000000036ae5cd8 c00000ff42b0bae0 d000000036bda220 0000000000000054 GPR04: 0000000000000001 0000000000000000 c00007ffff8d37c8 0000000000000000 GPR08: c000000000e19c00 0000000000000000 0000000000000000 3736343438312079 GPR12: 3930373337303434 c000000007a3a800 00000000007fffff 0000000000000023 GPR16: c00000ffa9d26028 c00000ffa9d261f8 0000000000000010 c00000ffa9d2ab28 GPR20: c00000ff42b0bc48 0000000000000001 c00000ff9f0d9888 0000000000000001 GPR24: c00000ffa9d26000 c00000ffa9d261e8 c00000ffa9d2a800 c00000ff9f0d9888 GPR28: c00000ffa9d26028 c00000ffa9d2aa98 0000000000000001 c00000ffa98f5b20 NIP [d000000036ae5cdc] btrfs_update_root+0x25c/0x4e0 [btrfs] LR [d000000036ae5cd8] btrfs_update_root+0x258/0x4e0 [btrfs] Call Trace: [c00000ff42b0bae0] [d000000036ae5cd8] btrfs_update_root+0x258/0x4e0 [btrfs] (unreliable) [c00000ff42b0bba0] [d000000036b53610] btrfs_sync_log+0x2d0/0xc60 [btrfs] [c00000ff42b0bce0] [d000000036b1785c] btrfs_sync_file+0x44c/0x4e0 [btrfs] [c00000ff42b0bd80] [c00000000032e300] vfs_fsync_range+0x70/0x120 [c00000ff42b0bdd0] [c00000000032e44c] do_fsync+0x5c/0xb0 [c00000ff42b0be10] [c00000000032e8dc] SyS_fdatasync+0x2c/0x40 [c00000ff42b0be30] [c000000000009488] system_call+0x3c/0x100 Instruction dump: 7f43d378 4bffebb9 60000000 88d90008 3d220000 e8b90000 3b390009 e87a01f0 e8898e08 e8f90000 4bfd48e5 60000000 <0fe00000> e95b0060 39200004 394a0ea0 ---[ end trace 8f2dc8f919cabab8 ]--- So fix this by doing the check of log_transid and updating or creating the log root's item while holding the root's log_mutex. Fixes: 7237f183 ("Btrfs: fix tree logs parallel sync") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Filipe Manana 提交于
commit 5338e43abbab13791144d37fd8846847062351c6 upstream. When replaying a log that contains a new file or directory name that needs to be added to its parent directory, we end up updating the mtime and the ctime of the parent directory to the current time after we have set their values to the correct ones (set at fsync time), efectivelly losing them. Sample reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/dir $ touch /mnt/dir/file # fsync of the directory is optional, not needed $ xfs_io -c fsync /mnt/dir $ xfs_io -c fsync /mnt/dir/file $ stat -c %Y /mnt/dir 1557856079 <power failure> $ sleep 3 $ mount /dev/sdb /mnt $ stat -c %Y /mnt/dir 1557856082 --> should have been 1557856079, the mtime is updated to the current time when replaying the log Fix this by not updating the mtime and ctime to the current time at btrfs_add_link() when we are replaying a log tree. This could be triggered by my recent fsync fuzz tester for fstests, for which an fstests patch exists titled "fstests: generic, fsync fuzz tester with fsstress". Fixes: e02119d5 ("Btrfs: Add a write ahead tree log to optimize synchronous operations") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: NNikolay Borisov <nborisov@suse.com> Signed-off-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Bortoli 提交于
commit dfb4a6f2191a80c8b790117d0ff592fd712d3296 upstream. In case of errors, predicate_parse() goes to the out_free label to free memory and to return an error code. However, predicate_parse() does not free the predicates of the temporary prog_stack array, thence leaking them. Link: http://lkml.kernel.org/r/20190528154338.29976-1-tomasbortoli@gmail.com Cc: stable@vger.kernel.org Fixes: 80765597 ("tracing: Rewrite filter logic to be simpler and faster") Reported-by: syzbot+6b8e0fb820e570c59e19@syzkaller.appspotmail.com Signed-off-by: NTomas Bortoli <tomasbortoli@gmail.com> [ Added protection around freeing prog_stack[i].pred ] Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Steffen Maier 提交于
commit ef4021fe5fd77ced0323cede27979d80a56211ca upstream. When the user tries to remove a zfcp port via sysfs, we only rejected it if there are zfcp unit children under the port. With purely automatically scanned LUNs there are no zfcp units but only SCSI devices. In such cases, the port_remove erroneously continued. We close the port and this implicitly closes all LUNs under the port. The SCSI devices survive with their private zfcp_scsi_dev still holding a reference to the "removed" zfcp_port (still allocated but invisible in sysfs) [zfcp_get_port_by_wwpn in zfcp_scsi_slave_alloc]. This is not a problem as long as the fc_rport stays blocked. Once (auto) port scan brings back the removed port, we unblock its fc_rport again by design. However, there is no mechanism that would recover (open) the LUNs under the port (no "ersfs_3" without zfcp_unit [zfcp_erp_strategy_followup_success]). Any pending or new I/O to such LUN leads to repeated: Done: NEEDS_RETRY Result: hostbyte=DID_IMM_RETRY driverbyte=DRIVER_OK See also v4.10 commit 6f2ce1c6 ("scsi: zfcp: fix rport unblock race with LUN recovery"). Even a manual LUN recovery (echo 0 > /sys/bus/scsi/devices/H:C:T:L/zfcp_failed) does not help, as the LUN links to the old "removed" port which remains to lack ZFCP_STATUS_COMMON_RUNNING [zfcp_erp_required_act]. The only workaround is to first ensure that the fc_rport is blocked (e.g. port_remove again in case it was re-discovered by (auto) port scan), then delete the SCSI devices, and finally re-discover by (auto) port scan. The port scan includes an fc_rport unblock, which in turn triggers a new scan on the scsi target to freshly get new pure auto scan LUNs. Fix this by rejecting port_remove also if there are SCSI devices (even without any zfcp_unit) under this port. Re-use mechanics from v3.7 commit d99b601b ("[SCSI] zfcp: restore refcount check on port_remove"). However, we have to give up zfcp_sysfs_port_units_mutex earlier in unit_add to prevent a deadlock with scsi_host scan taking shost->scan_mutex first and then zfcp_sysfs_port_units_mutex now in our zfcp_scsi_slave_alloc(). Signed-off-by: NSteffen Maier <maier@linux.ibm.com> Fixes: b62a8d9b ("[SCSI] zfcp: Use SCSI device data zfcp scsi dev instead of zfcp unit") Fixes: f8210e34 ("[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode") Cc: <stable@vger.kernel.org> #2.6.37+ Reviewed-by: NBenjamin Block <bblock@linux.ibm.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Steffen Maier 提交于
commit d27e5e07f9c49bf2a6a4ef254ce531c1b4fb5a38 upstream. With this early return due to zfcp_unit child(ren), we don't use the zfcp_port reference from the earlier zfcp_get_port_by_wwpn() anymore and need to put it. Signed-off-by: NSteffen Maier <maier@linux.ibm.com> Fixes: d99b601b ("[SCSI] zfcp: restore refcount check on port_remove") Cc: <stable@vger.kernel.org> #3.7+ Reviewed-by: NJens Remus <jremus@linux.ibm.com> Reviewed-by: NBenjamin Block <bblock@linux.ibm.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Piotr Figiel 提交于
commit 5cdb0ef6144f47440850553579aa923c20a63f23 upstream. In case USB disconnect happens at the moment transmitting workqueue is in progress the underlying interface may be gone causing a NULL pointer dereference. Add synchronization of the workqueue destruction with the detach implementation in core so that the transmitting workqueue is stopped during detach before the interfaces are removed. Fix following Oops: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = 9e6a802d [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis u_ether usb_serial_simple usbserial cdc_acm brcmfmac brcmutil smsc95xx usbnet ci_hdrc_imx ci_hdrc ulpi usbmisc_imx 8250_exar 8250_pci 8250 8250_base libcomposite configfs udc_core CPU: 0 PID: 7 Comm: kworker/u8:0 Not tainted 4.19.23-00076-g03740aa-dirty #102 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: brcmf_fws_wq brcmf_fws_dequeue_worker [brcmfmac] PC is at brcmf_txfinalize+0x34/0x90 [brcmfmac] LR is at brcmf_fws_dequeue_worker+0x218/0x33c [brcmfmac] pc : [<7f0dee64>] lr : [<7f0e4140>] psr: 60010093 sp : ee8abef0 ip : 00000000 fp : edf38000 r10: ffffffed r9 : edf38970 r8 : edf38004 r7 : edf3e970 r6 : 00000000 r5 : ede69000 r4 : 00000000 r3 : 00000a97 r2 : 00000000 r1 : 0000888e r0 : ede69000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 7d03c04a DAC: 00000051 Process kworker/u8:0 (pid: 7, stack limit = 0x24ec3e04) Stack: (0xee8abef0 to 0xee8ac000) bee0: ede69000 00000000 ed56c3e0 7f0e4140 bf00: 00000001 00000000 edf38004 edf3e99c ed56c3e0 80d03d00 edfea43a edf3e970 bf20: ee809880 ee804200 ee971100 00000000 edf3e974 00000000 ee804200 80135a70 bf40: 80d03d00 ee804218 ee809880 ee809894 ee804200 80d03d00 ee804218 ee8aa000 bf60: 00000088 80135d5c 00000000 ee829f00 ee829dc0 00000000 ee809880 80135d30 bf80: ee829f1c ee873eac 00000000 8013b1a0 ee829dc0 8013b07c 00000000 00000000 bfa0: 00000000 00000000 00000000 801010e8 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<7f0dee64>] (brcmf_txfinalize [brcmfmac]) from [<7f0e4140>] (brcmf_fws_dequeue_worker+0x218/0x33c [brcmfmac]) [<7f0e4140>] (brcmf_fws_dequeue_worker [brcmfmac]) from [<80135a70>] (process_one_work+0x138/0x3f8) [<80135a70>] (process_one_work) from [<80135d5c>] (worker_thread+0x2c/0x554) [<80135d5c>] (worker_thread) from [<8013b1a0>] (kthread+0x124/0x154) [<8013b1a0>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xee8abfb0 to 0xee8abff8) bfa0: 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e1530001 0a000007 e3560000 e1a00005 (05942008) ---[ end trace 079239dd31c86e90 ]--- Signed-off-by: NPiotr Figiel <p.figiel@camlintechnologies.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Mauro Carvalho Chehab 提交于
commit a47686636d84eaec5c9c6e84bd5f96bed34d526d upstream. Most Siano devices require an alignment for the response. Changeset f3be52b0056a ("media: usb: siano: Fix general protection fault in smsusb") changed the logic with gets such aligment, but it now produces a sparce warning: drivers/media/usb/siano/smsusb.c: In function 'smsusb_init_device': drivers/media/usb/siano/smsusb.c:447:37: warning: 'in_maxp' may be used uninitialized in this function [-Wmaybe-uninitialized] 447 | dev->response_alignment = in_maxp - sizeof(struct sms_msg_hdr); | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ The sparse message itself is bogus, but a broken (or fake) USB eeprom could produce a negative value for response_alignment. So, change the code in order to check if the result is not negative. Fixes: 31e0456de5be ("media: usb: siano: Fix general protection fault in smsusb") CC: <stable@vger.kernel.org> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
commit 45457c01171fd1488a7000d1751c06ed8560ee38 upstream. GCC complains about an apparently uninitialized variable recently added to smsusb_init_device(). It's a false positive, but to silence the warning this patch adds a trivial initialization. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Reported-by: Nkbuild test robot <lkp@intel.com> CC: <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
commit 31e0456de5be379b10fea0fa94a681057114a96e upstream. The syzkaller USB fuzzer found a general-protection-fault bug in the smsusb part of the Siano DVB driver. The fault occurs during probe because the driver assumes without checking that the device has both IN and OUT endpoints and the IN endpoint is ep1. By slightly rearranging the driver's initialization code, we can make the appropriate checks early on and thus avoid the problem. If the expected endpoints aren't present, the new code safely returns -ENODEV from the probe routine. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+53f029db71c19a47325a@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Reviewed-by: NJohan Hovold <johan@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Oliver Neukum 提交于
commit e0feb73428b69322dd5caae90b0207de369b5575 upstream. If a disconnected device is closed, rio_close() must free the buffers. Signed-off-by: NOliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Oliver Neukum 提交于
commit 3864d33943b4a76c6e64616280e98d2410b1190f upstream. This driver is using a global variable. It cannot handle more than one device at a time. The issue has been existing since the dawn of the driver. Signed-off-by: NOliver Neukum <oneukum@suse.com> Reported-by: syzbot+35f04d136fc975a70da4@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Maximilian Luz 提交于
commit ea261113385ac0a71c2838185f39e8452d54b152 upstream. Without USB_QUIRK_NO_LPM ethernet will not work and rtl8152 will complain with r8152 <device...>: Stop submitting intr, status -71 Adding the quirk resolves this. As the dock is externally powered, this should not have any drawbacks. Signed-off-by: NMaximilian Luz <luzmaximilian@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Oliver Neukum 提交于
commit 9a5729f68d3a82786aea110b1bfe610be318f80a upstream. The pointer used to log a failure of usb_register_dev() must be set before the error is logged. v2: fix that minor is not available before registration Signed-off-by: Noliver Neukum <oneukum@suse.com> Reported-by: syzbot+a0cbdbd6d169020c8959@syzkaller.appspotmail.com Fixes: 7b5cd5fe ("USB: SisUSB2VGA: Convert printk to dev_* macros") Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
commit a03ff54460817c76105f81f3aa8ef655759ccc9a upstream. The syzkaller USB fuzzer found a slab-out-of-bounds write bug in the USB core, caused by a failure to check the actual size of a BOS descriptor. This patch adds a check to make sure the descriptor is at least as large as it is supposed to be, so that the code doesn't inadvertently access memory beyond the end of the allocated region when assigning to dev->bos->desc->bNumDeviceCaps later on. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+71f1e64501a309fcc012@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Shuah Khan 提交于
commit 3ea3091f1bd8586125848c62be295910e9802af0 upstream. Fix the following sparse context imbalance regression introduced in a patch that fixed sleeping function called from invalid context bug. kbuild test robot reported on: tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-linus Regressions in current branch: drivers/usb/usbip/stub_dev.c:399:9: sparse: sparse: context imbalance in 'stub_probe' - different lock contexts for basic block drivers/usb/usbip/stub_dev.c:418:13: sparse: sparse: context imbalance in 'stub_disconnect' - different lock contexts for basic block drivers/usb/usbip/stub_dev.c:464:1-10: second lock on line 476 Error ids grouped by kconfigs: recent_errors ├── i386-allmodconfig │ └── drivers-usb-usbip-stub_dev.c:second-lock-on-line ├── x86_64-allmodconfig │ ├── drivers-usb-usbip-stub_dev.c:sparse:sparse:context-imbalance-in-stub_disconnect-different-lock-contexts-for-basic-block │ └── drivers-usb-usbip-stub_dev.c:sparse:sparse:context-imbalance-in-stub_probe-different-lock-contexts-for-basic-block └── x86_64-allyesconfig └── drivers-usb-usbip-stub_dev.c:second-lock-on-line This is a real problem in an error leg where spin_lock() is called on an already held lock. Fix the imbalance in stub_probe() and stub_disconnect(). Signed-off-by: NShuah Khan <skhan@linuxfoundation.org> Fixes: 0c9e8b3cad65 ("usbip: usbip_host: fix BUG: sleeping function called from invalid context") Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Shuah Khan 提交于
commit 0c9e8b3cad654bfc499c10b652fbf8f0b890af8f upstream. stub_probe() and stub_disconnect() call functions which could call sleeping function in invalid context whil holding busid_lock. Fix the problem by refining the lock holds to short critical sections to change the busid_priv fields. This fix restructures the code to limit the lock holds in stub_probe() and stub_disconnect(). stub_probe(): [15217.927028] BUG: sleeping function called from invalid context at mm/slab.h:418 [15217.927038] in_atomic(): 1, irqs_disabled(): 0, pid: 29087, name: usbip [15217.927044] 5 locks held by usbip/29087: [15217.927047] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15217.927062] #1: 000000008f9ba75b (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15217.927072] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15217.927082] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15217.927090] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15217.927103] CPU: 3 PID: 29087 Comm: usbip Tainted: G W 5.1.0-rc6+ #40 [15217.927106] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15217.927109] Call Trace: [15217.927118] dump_stack+0x63/0x85 [15217.927127] ___might_sleep+0xff/0x120 [15217.927133] __might_sleep+0x4a/0x80 [15217.927143] kmem_cache_alloc_trace+0x1aa/0x210 [15217.927156] stub_probe+0xe8/0x440 [usbip_host] [15217.927171] usb_probe_device+0x34/0x70 stub_disconnect(): [15279.182478] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [15279.182487] in_atomic(): 1, irqs_disabled(): 0, pid: 29114, name: usbip [15279.182492] 5 locks held by usbip/29114: [15279.182494] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15279.182506] #1: 00000000702cf0f3 (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15279.182514] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15279.182522] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15279.182529] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15279.182541] CPU: 0 PID: 29114 Comm: usbip Tainted: G W 5.1.0-rc6+ #40 [15279.182543] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15279.182546] Call Trace: [15279.182554] dump_stack+0x63/0x85 [15279.182561] ___might_sleep+0xff/0x120 [15279.182566] __might_sleep+0x4a/0x80 [15279.182574] __mutex_lock+0x55/0x950 [15279.182582] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182587] ? reacquire_held_locks+0xec/0x1a0 [15279.182591] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182597] ? find_held_lock+0x94/0xa0 [15279.182609] mutex_lock_nested+0x1b/0x20 [15279.182614] ? mutex_lock_nested+0x1b/0x20 [15279.182618] kernfs_remove_by_name_ns+0x2a/0x90 [15279.182625] sysfs_remove_file_ns+0x15/0x20 [15279.182629] device_remove_file+0x19/0x20 [15279.182634] stub_disconnect+0x6d/0x180 [usbip_host] [15279.182643] usb_unbind_device+0x27/0x60 Signed-off-by: NShuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Carsten Schmid 提交于
commit 7aa1bb2ffd84d6b9b5f546b079bb15cd0ab6e76e upstream. With defective USB sticks we see the following error happen: usb 1-3: new high-speed USB device number 6 using xhci_hcd usb 1-3: device descriptor read/64, error -71 usb 1-3: device descriptor read/64, error -71 usb 1-3: new high-speed USB device number 7 using xhci_hcd usb 1-3: device descriptor read/64, error -71 usb 1-3: unable to get BOS descriptor set usb 1-3: New USB device found, idVendor=0781, idProduct=5581 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 ... BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 This comes from the following place: [ 1660.215380] IP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] [ 1660.222092] PGD 0 P4D 0 [ 1660.224918] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 1660.425520] CPU: 1 PID: 38 Comm: kworker/1:1 Tainted: P U W O 4.14.67-apl #1 [ 1660.434277] Workqueue: usb_hub_wq hub_event [usbcore] [ 1660.439918] task: ffffa295b6ae4c80 task.stack: ffffad4580150000 [ 1660.446532] RIP: 0010:xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] [ 1660.453821] RSP: 0018:ffffad4580153c70 EFLAGS: 00010046 [ 1660.459655] RAX: 0000000000000000 RBX: ffffa295b4d7c000 RCX: 0000000000000002 [ 1660.467625] RDX: 0000000000000002 RSI: ffffffff984a55b2 RDI: ffffffff984a55b2 [ 1660.475586] RBP: ffffad4580153cc8 R08: 0000000000d6520a R09: 0000000000000001 [ 1660.483556] R10: ffffad4580a004a0 R11: 0000000000000286 R12: ffffa295b4d7c000 [ 1660.491525] R13: 0000000000010648 R14: ffffa295a84e1800 R15: 0000000000000000 [ 1660.499494] FS: 0000000000000000(0000) GS:ffffa295bfc80000(0000) knlGS:0000000000000000 [ 1660.508530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1660.514947] CR2: 0000000000000008 CR3: 000000025a114000 CR4: 00000000003406a0 [ 1660.522917] Call Trace: [ 1660.525657] usb_set_usb2_hardware_lpm+0x3d/0x70 [usbcore] [ 1660.531792] usb_disable_device+0x242/0x260 [usbcore] [ 1660.537439] usb_disconnect+0xc1/0x2b0 [usbcore] [ 1660.542600] hub_event+0x596/0x18f0 [usbcore] [ 1660.547467] ? trace_preempt_on+0xdf/0x100 [ 1660.552040] ? process_one_work+0x1c1/0x410 [ 1660.556708] process_one_work+0x1d2/0x410 [ 1660.561184] ? preempt_count_add.part.3+0x21/0x60 [ 1660.566436] worker_thread+0x2d/0x3f0 [ 1660.570522] kthread+0x122/0x140 [ 1660.574123] ? process_one_work+0x410/0x410 [ 1660.578792] ? kthread_create_on_node+0x60/0x60 [ 1660.583849] ret_from_fork+0x3a/0x50 [ 1660.587839] Code: 00 49 89 c3 49 8b 84 24 50 16 00 00 8d 4a ff 48 8d 04 c8 48 89 ca 4c 8b 10 45 8b 6a 04 48 8b 00 48 89 45 c0 49 8b 86 80 03 00 00 <48> 8b 40 08 8b 40 03 0f 1f 44 00 00 45 85 ff 0f 84 81 01 00 00 [ 1660.608980] RIP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] RSP: ffffad4580153c70 [ 1660.617921] CR2: 0000000000000008 Tracking this down shows that udev->bos is NULL in the following code: (xhci.c, in xhci_set_usb2_hardware_lpm) field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); <<<<<<< here xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", enable ? "enable" : "disable", port_num + 1); if (enable) { /* Host supports BESL timeout instead of HIRD */ if (udev->usb2_hw_lpm_besl_capable) { /* if device doesn't have a preferred BESL value use a * default one which works with mixed HIRD and BESL * systems. See XHCI_DEFAULT_BESL definition in xhci.h */ if ((field & USB_BESL_SUPPORT) && (field & USB_BESL_BASELINE_VALID)) hird = USB_GET_BESL_BASELINE(field); else hird = udev->l1_params.besl; The failing case is when disabling LPM. So it is sufficient to avoid access to udev->bos by moving the instruction into the "enable" clause. Cc: Stable <stable@vger.kernel.org> Signed-off-by: NCarsten Schmid <carsten_schmid@mentor.com> Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Andrey Smirnov 提交于
commit f7fac17ca925faa03fc5eb854c081a24075f8bad upstream. Xhci_handshake() implements the algorithm already captured by readl_poll_timeout_atomic(). Convert the former to use the latter to avoid repetition. Turned out this patch also fixes a bug on the AMD Stoneyridge platform where usleep(1) sometimes takes over 10ms. This means a 5 second timeout can easily take over 15 seconds which will trigger the watchdog and reboot the system. [Add info about patch fixing a bug to commit message -Mathias] Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com> Tested-by: NRaul E Rangel <rrangel@chromium.org> Reviewed-by: NRaul E Rangel <rrangel@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Fabio Estevam 提交于
commit c1a145a3ed9a40f3b6145feb97789e8eb49c5566 upstream. Commit 597c56e372da ("xhci: update bounce buffer with correct sg num") caused the following build warnings: drivers/usb/host/xhci-ring.c:676:19: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'size_t {aka unsigned int}' [-Wformat=] Use %zu for printing size_t type in order to fix the warnings. Fixes: 597c56e372da ("xhci: update bounce buffer with correct sg num") Reported-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NFabio Estevam <festevam@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Henry Lin 提交于
commit 597c56e372dab2c7f79b8d700aad3a5deebf9d1b upstream. This change fixes a data corruption issue occurred on USB hard disk for the case that bounce buffer is used during transferring data. While updating data between sg list and bounce buffer, current implementation passes mapped sg number (urb->num_mapped_sgs) to sg_pcopy_from_buffer() and sg_pcopy_to_buffer(). This causes data not get copied if target buffer is located in the elements after mapped sg elements. This change passes sg number for full list to fix issue. Besides, for copying data from bounce buffer, calling dma_unmap_single() on the bounce buffer before copying data to sg list can avoid cache issue. Fixes: f9c589e1 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: NHenry Lin <henryl@nvidia.com> Signed-off-by: NMathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rasmus Villemoes 提交于
commit ef4d6f6b275c498f8e5626c99dbeefdc5027f843 upstream. The ror32 implementation (word >> shift) | (word << (32 - shift) has undefined behaviour if shift is outside the [1, 31] range. Similarly for the 64 bit variants. Most callers pass a compile-time constant (naturally in that range), but there's an UBSAN report that these may actually be called with a shift count of 0. Instead of special-casing that, we can make them DTRT for all values of shift while also avoiding UB. For some reason, this was already partly done for rol32 (which was well-defined for [0, 31]). gcc 8 recognizes these patterns as rotates, so for example __u32 rol32(__u32 word, unsigned int shift) { return (word << (shift & 31)) | (word >> ((-shift) & 31)); } compiles to 0000000000000020 <rol32>: 20: 89 f8 mov %edi,%eax 22: 89 f1 mov %esi,%ecx 24: d3 c0 rol %cl,%eax 26: c3 retq Older compilers unfortunately do not do as well, but this only affects the small minority of users that don't pass constants. Due to integer promotions, ro[lr]8 were already well-defined for shifts in [0, 8], and ro[lr]16 were mostly well-defined for shifts in [0, 16] (only mostly - u16 gets promoted to _signed_ int, so if bit 15 is set, word << 16 is undefined). For consistency, update those as well. Link: http://lkml.kernel.org/r/20190410211906.2190-1-linux@rasmusvillemoes.dkSigned-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Reported-by: NIdo Schimmel <idosch@mellanox.com> Tested-by: NIdo Schimmel <idosch@mellanox.com> Reviewed-by: NWill Deacon <will.deacon@arm.com> Cc: Vadim Pasternak <vadimp@mellanox.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NMatthias Kaehlcke <mka@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 James Clarke 提交于
commit d3c976c14ad8af421134c428b0a89ff8dd3bd8f8 upstream. Previously, %g2 would end up with the value PAGE_SIZE, but after the commit mentioned below it ends up with the value 1 due to being reused for a different purpose. We need it to be PAGE_SIZE as we use it to step through pages in our demap loop, otherwise we set different flags in the low 12 bits of the address written to, thereby doing things other than a nucleus page flush. Fixes: a74ad5e6 ("sparc64: Handle extremely large kernel TLB range flushes more gracefully.") Reported-by: NMeelis Roos <mroos@linux.ee> Tested-by: NMeelis Roos <mroos@linux.ee> Signed-off-by: NJames Clarke <jrtc27@jrtc27.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 6月, 2019 17 次提交
-
-
由 Greg Kroah-Hartman 提交于
-
由 Junwei Hu 提交于
commit 526f5b851a96566803ee4bee60d0a34df56c77f8 upstream. Error message printed: modprobe: ERROR: could not insert 'tipc': Address family not supported by protocol. when modprobe tipc after the following patch: switch order of device registration, commit 7e27e8d6130c ("tipc: switch order of device registration to fix a crash") Because sock_create_kern(net, AF_TIPC, ...) called by tipc_topsrv_create_listener() in the initialization process of tipc_init_net(), so tipc_socket_init() must be execute before that. Meanwhile, tipc_net_id need to be initialized when sock_create() called, and tipc_socket_init() is no need to be called for each namespace. I add a variable tipc_topsrv_net_ops, and split the register_pernet_subsys() of tipc into two parts, and split tipc_socket_init() with initialization of pernet params. By the way, I fixed resources rollback error when tipc_bcast_init() failed in tipc_init_net(). Fixes: 7e27e8d6130c ("tipc: switch order of device registration to fix a crash") Signed-off-by: NJunwei Hu <hujunwei4@huawei.com> Reported-by: NWang Wang <wangwang2@huawei.com> Reported-by: syzbot+1e8114b61079bfe9cbc5@syzkaller.appspotmail.com Reviewed-by: NKang Zhou <zhoukang7@huawei.com> Reviewed-by: NSuanming Mou <mousuanming@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 David S. Miller 提交于
commit 5593530e56943182ebb6d81eca8a3be6db6dbba4 upstream. This reverts commit 532b0f7ece4cb2ffd24dc723ddf55242d1188e5e. More revisions coming up. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Konrad Rzeszutek Wilk 提交于
commit 7681f31ec9cdacab4fd10570be924f2cef6669ba upstream. There is no need for this at all. Worst it means that if the guest tries to write to BARs it could lead (on certain platforms) to PCI SERR errors. Please note that with af6fc858 "xen-pciback: limit guest control of command register" a guest is still allowed to enable those control bits (safely), but is not allowed to disable them and that therefore a well behaved frontend which enables things before using them will still function correctly. This is done via an write to the configuration register 0x4 which triggers on the backend side: command_write \- pci_enable_device \- pci_enable_device_flags \- do_pci_enable_device \- pcibios_enable_device \-pci_enable_resourcess [which enables the PCI_COMMAND_MEMORY|PCI_COMMAND_IO] However guests (and drivers) which don't do this could cause problems, including the security issues which XSA-120 sought to address. Reported-by: NJan Beulich <jbeulich@suse.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NJuergen Gross <jgross@suse.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Masahiro Yamada 提交于
commit e9666d10a5677a494260d60d1fa0b73cc7646eb3 upstream. Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label". The jump label is controlled by HAVE_JUMP_LABEL, which is defined like this: #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) # define HAVE_JUMP_LABEL #endif We can improve this by testing 'asm goto' support in Kconfig, then make JUMP_LABEL depend on CC_HAS_ASM_GOTO. Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will match to the real kernel capability. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: NSedat Dilek <sedat.dilek@gmail.com> [nc: Fix trivial conflicts in 4.19 arch/xtensa/kernel/jump_label.c doesn't exist yet Ensured CC_HAVE_ASM_GOTO and HAVE_JUMP_LABEL were sufficiently eliminated] Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Masahiro Yamada 提交于
commit 81b45683487a51b0f4d3b29d37f20d6d078544e4 upstream. __compiletime_assert_fallback() is supposed to stop building earlier by using the negative-array-size method in case the compiler does not support "error" attribute, but has never worked like that. You can simply try: BUILD_BUG_ON(1); GCC immediately terminates the build, but Clang does not report anything because Clang does not support the "error" attribute now. It will later fail at link time, but __compiletime_assert_fallback() is not working at least. The root cause is commit 1d6a0d19 ("bug.h: prevent double evaluation of `condition' in BUILD_BUG_ON"). Prior to that commit, BUILD_BUG_ON() was checked by the negative-array-size method *and* the link-time trick. Since that commit, the negative-array-size is not effective because '__cond' is no longer constant. As the comment in <linux/build_bug.h> says, GCC (and Clang as well) only emits the error for obvious cases. When '__cond' is a variable, ((void)sizeof(char[1 - 2 * __cond])) ... is not obvious for the compiler to know the array size is negative. Reverting that commit would break BUILD_BUG() because negative-size-array is evaluated before the code is optimized out. Let's give up __compiletime_assert_fallback(). This commit does not change the current behavior since it just rips off the useless code. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: NKees Cook <keescook@chromium.org> Reviewed-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 ndesaulniers@google.com 提交于
commit 8bd66d147c88bd441178c7b4c774ae5a185f19b8 upstream. asm_volatile_goto should also be defined for other compilers that support asm goto. Fixes commit 815f0ddb ("include/linux/compiler*.h: make compiler-*.h mutually exclusive"). Signed-off-by: NNick Desaulniers <ndesaulniers@google.com> Signed-off-by: NMiguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Daniel Axtens 提交于
commit 357d065a44cdd77ed5ff35155a989f2a763e96ef upstream. VMX ghash was using a fallback that did not support interleaving simd and nosimd operations, leading to failures in the extended test suite. If I understood correctly, Eric's suggestion was to use the same data format that the generic code uses, allowing us to call into it with the same contexts. I wasn't able to get that to work - I think there's a very different key structure and data layout being used. So instead steal the arm64 approach and perform the fallback operations directly if required. Fixes: cc333cd6 ("crypto: vmx - Adding GHASH routines for VMX module") Cc: stable@vger.kernel.org # v4.1+ Reported-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NDaniel Axtens <dja@axtens.net> Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDaniel Axtens <dja@axtens.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jakub Kicinski 提交于
[ Upstream commit c3f4a6c39cf269a40d45f813c05fa830318ad875 ] On device surprise removal path (the notifier) we can't bail just because the features are disabled. They may have been enabled during the lifetime of the device. This bug leads to leaking netdev references and use-after-frees if there are active connections while device features are cleared. Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jakub Kicinski 提交于
[ Upstream commit 3686637e507b48525fcea6fb91e1988bdbc14530 ] TLS offload drivers shouldn't (and currently don't) block the TLS offload feature changes based on whether there are active offloaded connections or not. This seems to be a good idea, because we want the admin to be able to disable the TLS offload at any time, and there is no clean way of disabling it for active connections (TX side is quite problematic). So if features are cleared existing connections will stay offloaded until they close, and new connections will not attempt offload to a given device. However, the offload state removal handling is currently broken if feature flags get cleared while there are active TLS offloads. RX side will completely bail from cleanup, even on normal remove path, leaving device state dangling, potentially causing issues when the 5-tuple is reused. It will also fail to release the netdev reference. Remove the RX-side warning message, in next release cycle it should be printed when features are disabled, rather than when connection dies, but for that we need a more efficient method of finding connection of a given netdev (a'la BPF offload code). Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Michael Chan 提交于
[ Upstream commit 296d5b54163964b7ae536b8b57dfbd21d4e868e1 ] For every RX packet, the driver replenishes all buffers used for that packet and puts them back into the RX ring and RX aggregation ring. In one code path where the RX packet has one RX buffer and one or more aggregation buffers, we missed recycling the aggregation buffer(s) if we are unable to allocate a new SKB buffer. This leads to the aggregation ring slowly running out of buffers over time. Fix it by properly recycling the aggregation buffers. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: NRakesh Hemnani <rhemnani@fb.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Weifeng Voon 提交于
stmmac_init_chan() needs to be called before stmmac_init_rx_chan() and stmmac_init_tx_chan(). This is because if PBLx8 is to be used, "DMA_CH(#i)_Control.PBLx8" needs to be set before programming "DMA_CH(#i)_TX_Control.TxPBL" and "DMA_CH(#i)_RX_Control.RxPBL". Fixes: 47f2a9ce ("net: stmmac: dma channel init prepared for multiple queues") Reviewed-by: NZhang, Baoli <baoli.zhang@intel.com> Signed-off-by: NOng Boon Leong <boon.leong.ong@intel.com> Signed-off-by: NWeifeng Voon <weifeng.voon@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Saeed Mahameed 提交于
[ Upstream commit c0194e2d0ef0e5ce5e21a35640d23a706827ae28 ] When CQE compression is enabled (Multi-host systems), compressed CQEs might arrive to the driver rx, compressed CQEs don't have a valid hash offload and the driver already reports a hash value of 0 and invalid hash type on the skb for compressed CQEs, but this is not good enough. On a congested PCIe, where CQE compression will kick in aggressively, gro will deliver lots of out of order packets due to the invalid hash and this might cause a serious performance drop. The only valid solution, is to disable rxhash offload at all when CQE compression is favorable (Multi-host systems). Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Parav Pandit 提交于
[ Upstream commit 25fa506b70cadb580c1e9cbd836d6417276d4bcd ] root ns is yet another fs core node which is freed using kfree() by tree_put_node(). Rest of the other fs core objects are also allocated using kmalloc variants. However, root ns memory is allocated using kvzalloc(). Hence allocate root ns memory using kzalloc(). Fixes: 25302363 ("net/mlx5_core: Flow steering tree initialization") Signed-off-by: NParav Pandit <parav@mellanox.com> Reviewed-by: NDaniel Jurgens <danielj@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chris Packham 提交于
TLV_SET is called with a data pointer and a len parameter that tells us how many bytes are pointed to by data. When invoking memcpy() we need to careful to only copy len bytes. Previously we would copy TLV_LENGTH(len) bytes which would copy an extra 4 bytes past the end of the data pointer which newer GCC versions complain about. In file included from test.c:17: In function 'TLV_SET', inlined from 'test' at test.c:186:5: /usr/include/linux/tipc_config.h:317:3: warning: 'memcpy' forming offset [33, 36] is out of the bounds [0, 32] of object 'bearer_name' with type 'char[32]' [-Warray-bounds] memcpy(TLV_DATA(tlv_ptr), data, tlv_len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ test.c: In function 'test': test.c::161:10: note: 'bearer_name' declared here char bearer_name[TIPC_MAX_BEARER_NAME]; ^~~~~~~~~~~ We still want to ensure any padding bytes at the end are initialised, do this with a explicit memset() rather than copy bytes past the end of data. Apply the same logic to TCM_SET. Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Parav Pandit 提交于
[ Upstream commit 9414277a5df3669c67e818708c0f881597e0118e ] In below code flow, for ingress acl table root ns memory leads to double free. mlx5_init_fs init_ingress_acls_root_ns() init_ingress_acl_root_ns kfree(steering->esw_ingress_root_ns); /* steering->esw_ingress_root_ns is not marked NULL */ mlx5_cleanup_fs cleanup_ingress_acls_root_ns steering->esw_ingress_root_ns non NULL check passes. kfree(steering->esw_ingress_root_ns); /* double free */ Similar issue exist for other tables. Hence zero out the pointers to not process the table again. Fixes: 9b93ab98 ("net/mlx5: Separate ingress/egress namespaces for each vport") Fixes: 40c3eebb49e51 ("net/mlx5: Add support in RDMA RX steering") Signed-off-by: NParav Pandit <parav@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Kloetzke Jan 提交于
[ Upstream commit ad70411a978d1e6e97b1e341a7bde9a79af0c93d ] When disconnecting cdc_ncm the kernel sporadically crashes shortly after the disconnect: [ 57.868812] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 58.006653] PC is at 0x0 [ 58.009202] LR is at call_timer_fn+0xec/0x1b4 [ 58.013567] pc : [<0000000000000000>] lr : [<ffffff80080f5130>] pstate: 00000145 [ 58.020976] sp : ffffff8008003da0 [ 58.024295] x29: ffffff8008003da0 x28: 0000000000000001 [ 58.029618] x27: 000000000000000a x26: 0000000000000100 [ 58.034941] x25: 0000000000000000 x24: ffffff8008003e68 [ 58.040263] x23: 0000000000000000 x22: 0000000000000000 [ 58.045587] x21: 0000000000000000 x20: ffffffc68fac1808 [ 58.050910] x19: 0000000000000100 x18: 0000000000000000 [ 58.056232] x17: 0000007f885aff8c x16: 0000007f883a9f10 [ 58.061556] x15: 0000000000000001 x14: 000000000000006e [ 58.066878] x13: 0000000000000000 x12: 00000000000000ba [ 58.072201] x11: ffffffc69ff1db30 x10: 0000000000000020 [ 58.077524] x9 : 8000100008001000 x8 : 0000000000000001 [ 58.082847] x7 : 0000000000000800 x6 : ffffff8008003e70 [ 58.088169] x5 : ffffffc69ff17a28 x4 : 00000000ffff138b [ 58.093492] x3 : 0000000000000000 x2 : 0000000000000000 [ 58.098814] x1 : 0000000000000000 x0 : 0000000000000000 ... [ 58.205800] [< (null)>] (null) [ 58.210521] [<ffffff80080f5298>] expire_timers+0xa0/0x14c [ 58.215937] [<ffffff80080f542c>] run_timer_softirq+0xe8/0x128 [ 58.221702] [<ffffff8008081120>] __do_softirq+0x298/0x348 [ 58.227118] [<ffffff80080a6304>] irq_exit+0x74/0xbc [ 58.232009] [<ffffff80080e17dc>] __handle_domain_irq+0x78/0xac [ 58.237857] [<ffffff8008080cf4>] gic_handle_irq+0x80/0xac ... The crash happens roughly 125..130ms after the disconnect. This correlates with the 'delay' timer that is started on certain USB tx/rx errors in the URB completion handler. The problem is a race of usbnet_stop() with usbnet_start_xmit(). In usbnet_stop() we call usbnet_terminate_urbs() to cancel all URBs in flight. This only makes sense if no new URBs are submitted concurrently, though. But the usbnet_start_xmit() can run at the same time on another CPU which almost unconditionally submits an URB. The error callback of the new URB will then schedule the timer after it was already stopped. The fix adds a check if the tx queue is stopped after the tx list lock has been taken. This should reliably prevent the submission of new URBs while usbnet_terminate_urbs() does its job. The same thing is done on the rx side even though it might be safe due to other flags that are checked there. Signed-off-by: NJan Klötzke <Jan.Kloetzke@preh.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-