Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Replace the FIT() macro with the kernel-provided clamp_val() macro.

FIT was always being called with a member of a struct ide_timing,
which are shorts, and constant constraints for the min and max.

Thus we can use clamp_val, rather than clamp_t.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Since ide_driveid_update() uses polling to execute the IDENTIFY DEVICE command
but clears nIEN bit in the control register and doesn't mask the IDE interrupt,
the latter does happen and lead to the corresponding message to appear:

ide0: unexpected interrupt, status=0x58, count=1

when e.g. running hdparm with option -X with a non-PCI IDE driver...
Signed-off-by: NMikhail Cherkashin <mcherkashin@ru.mvista.com>
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fix tRP timing for UDMA mode 4 according to the ATA specification.
Signed-off-by: NMikhail Cherkashin <mcherkhashin@ru.mvista.com>
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

 # cat devices.list
 c 1:3 r
 # echo 'c 1:3 w' > sub/devices.allow
 # cat sub/devices.list
 c 1:3 w

As illustrated, the parent group has no write permission to /dev/null, so
it's child should not be allowed to add this write permission.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

 # echo "b $((0x7fffffff)):$((0x80000000)) rwm" > devices.allow
 # cat devices.list
 b 214748364:-21474836 rwm

though a major/minor number of 0x800000000 is meaningless, we
should not cast it to a negative value.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  cpusets, hotplug, scheduler: fix scheduler domain breakage

Commit f18f982a ("sched: CPU hotplug events must not destroy scheduler
domains created by the cpusets") introduced a hotplug-related problem as
described below:

Upon CPU_DOWN_PREPARE,

  update_sched_domains() -> detach_destroy_domains(&cpu_online_map)

does the following:

/*
 * Force a reinitialization of the sched domains hierarchy. The domains
 * and groups cannot be updated in place without racing with the balancing
 * code, so we temporarily attach all running cpus to the NULL domain
 * which will prevent rebalancing while the sched domains are recalculated.
 */

The sched-domains should be rebuilt when a CPU_DOWN ops. has been
completed, effectively either upon CPU_DEAD{_FROZEN} (upon success) or
CPU_DOWN_FAILED{_FROZEN} (upon failure -- restore the things to their
initial state). That's what update_sched_domains() also does but only
for !CPUSETS case.

With f18f982a, sched-domains' reinitialization is delegated to
CPUSETS code:

cpuset_handle_cpuhp() -> common_cpu_mem_hotplug_unplug() ->
rebuild_sched_domains()

Being called for CPU_UP_PREPARE and if its callback is called after
update_sched_domains()), it just negates all the work done by
update_sched_domains() -- i.e. a soon-to-be-offline cpu is included in
the sched-domains and that makes it visible for the load-balancer
while the CPU_DOWN ops. is in progress.

__migrate_live_tasks() moves the tasks off a 'dead' cpu (it's already
"offline" when this function is called).

try_to_wake_up() is called for one of these tasks from another CPU ->
the load-balancer (wake_idle()) picks up a "dead" CPU and places the
task on it. Then e.g. BUG_ON(rq->nr_running) detects this a bit later
-> oops.
Signed-off-by: NDmitry Adamushko <dmitry.adamushko@gmail.com>
Tested-by: NVegard Nossum <vegard.nossum@gmail.com>
Cc: Paul Menage <menage@google.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: miaox@cn.fujitsu.com
Cc: rostedt@goodmis.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix ldt limit for 64 bit

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] bsg: fix oops on remove
  [SCSI] fusion: default MSI to disabled for SPI and FC controllers
  [SCSI] ipr: Fix HDIO_GET_IDENTITY oops for SATA devices
  [SCSI] mptspi: fix oops in mptspi_dv_renegotiate_work()
  [SCSI] erase invalid data returned by device

The current definition of wksidarr works fine on little endian arches
(since cpu_to_le32 is a no-op there), but on big-endian arches, it fails
to compile with this error:

error: braced-group within expression allowed only inside a function

The problem is that this static declaration has cpu_to_le32 embedded
within it, and that expands into a function macro.  We need to use
__constant_cpu_to_le32() instead.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Try this:

    mount a share with unix extensions
    create a file on it
    umount the share

You'll get the following message in the ring buffer:

VFS: Busy inodes after unmount of cifs. Self-destruct in 5 seconds.  Have a
nice day...

...the problem is that cifs_get_inode_info_unix is creating and hashing
a new inode even when it's going to return error anyway. The first
lookup when creating a file returns an error so we end up leaking this
inode before we do the actual create. This appears to be a regression
caused by commit 0e4bbde9.

The following patch seems to fix it for me, and fixes a minor
formatting nit as well.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Acked-by: NSteven French <sfrench@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix FRV irqs_disabled() to return an int, not an unsigned long to avoid
this warning:

kernel/sched.c: In function '__might_sleep':
kernel/sched.c:8198: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cc: Philippe Elie <phil.el@wanadoo.fr>
Cc: John Levon <levon@movementarian.org>
Cc: Maynard Johnson <maynardj@us.ibm.com>
Cc: Richard Purdie <rpurdie@openedhand.com>
Cc: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Cc: Jason Yeh <jason.yeh@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the rtc8564 chip entry
Signed-off-by: NJon Smirl <jonsmirl@gmail.com>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix chip naming from fm3031-rtc to fm3031
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cortland Setlow pointed out a bug in ov7670.c where the result from
ov7670_read() was just being checked for !0, rather than <0.  This made me
realize that ov7670_read's semantics were rather confusing; it both fills
in 'value' with the result, and returns it.  This is goes against general
kernel convention; so rather than fixing callers, let's fix the function.

This makes ov7670_read return <0 in the case of an error, and 0 upon
success. Thus, code like:

res = ov7670_read(...);
if (!res)
	goto error;

..will work properly.
Signed-off-by: NCortland Setlow <csetlow@tower-research.com>
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I had 8250.nr_uarts=16 in the boot line of a test kernel and I had a weird
mysterious crash in sysfs.  After taking an in-depth look I realized that
CONFIG_SERIAL_8250_NR_UARTS was set to 4 and I was walking off the end of
the serial8250_ports array.

Ouch!!!

Don't let this happen to someone else.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NAlan Cox <alan@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is a bugfix for how defio handles multiple processes manipulating
the same framebuffer.

Thanks to Bernard Blackham for identifying this bug.

It occurs when two applications mmap the same framebuffer and concurrently
write to the same page.  Normally, this doesn't occur since only a single
process mmaps the framebuffer.  The symptom of the bug is that the mapping
applications will hang.  The cause is that defio incorrectly tries to add the
same page twice to the pagelist.  The solution I have is to walk the pagelist
and check for a duplicate before adding.  Since I needed to walk the pagelist,
I now also keep the pagelist in sorted order.
Signed-off-by: NJaya Kumar <jayakumar.lkml@gmail.com>
Cc: Bernard Blackham <bernard@largestprime.net>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Coverity CID: 1356 RESOURCE_LEAK

I found a very old patch for this that was Acked but did not get applied
https://lists.linux-foundation.org/pipermail/kernel-janitors/2006-September/016362.html

There looks to be a small leak in isdn_writebuf_stub() in isdn_common.c, when
copy_from_user() returns an un-copied data length (length != 0).  The below
patch should be a minimally invasive fix.
Signed-off-by: NDarren Jenkins <darrenrjenkins@gmailcom>
Acked-by: NKarsten Keil <kkeil@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Coverity CID: 2172 RESOURCE_LEAK

When pool_allocate() tries to enlarge a packet, if it can not allocate enough
memory, it returns NULL without first freeing the old packet.

This patch just frees the packet first.
Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If you do a modremove of any sas driver, you run into an oops on
shutdown when the host is removed (coming from the host bsg device).
The root cause seems to be that there's a use after free of the
bsg_class_device:  In bsg_kref_release_function, this is used (to do a
put_device(bcg->parent) after bcg->release has been called.  In sas (and
possibly many other things) bcd->release frees the queue which contains
the bsg_class_device, so we get a put_device on unreferenced memory.
Fix this by taking a copy of the pointer to the parent before releasing
bsg.
Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

There's a fault on the FC controllers that makes them not respond
correctly to MSI.  The SPI controllers are fine, but are likely to be
onboard on older motherboards which don't handle MSI correctly, so
default both these cases to disabled.  Enable by setting the module
parameter mpt_msi_enable=1.

For the SAS case, enable MSI by default, but it can be disabled by
setting the module parameter mpt_msi_enable=0.

Cc: "Prakash, Sathya" <sathya.prakash@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Fix size of LDT entries. On x86-64, ldt_desc is a double-sized descriptor.
Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [PATCH] IPMI: return correct value from ipmi_write

This patch corrects the handling of write operations to the IPMI watchdog
to work as intended by returning the number of characters actually
processed. Without this patch, an "echo V >/dev/watchdog" enables the
watchdog if IPMI is providing the watchdog function.
Signed-off-by: NMark Rustad <MRustad@gmail.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Currently, ipr does not support HDIO_GET_IDENTITY to SATA devices.
An oops occurs if userspace attempts to send the command. Since hald
issues the command, ensure we fail the ioctl in ipr. This is a
temporary solution to the oops. Once the ipr libata EH conversion
is upstream, ipr will fully support HDIO_GET_IDENTITY.
Tested-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata-acpi: don't call sleeping function from invalid context
  Added Targa Visionary 1000 IDE adapter to pata_sis.c
  libata-acpi: filter out DIPM enable

When we release the iclog, we do an atomic_dec_and_lock to determine if
we are the last reference and need to trigger update of log headers and
writeout.  However, in xlog_state_get_iclog_space() we also need to
check if we have the last reference count there.  If we do, we release
the log buffer, otherwise we decrement the reference count.

But the compare and decrement in xlog_state_get_iclog_space() is not
atomic, so both places can see a reference count of 2 and neither will
release the iclog.  That leads to a filesystem hang.

Close the race by replacing the atomic_read() and atomic_dec() pair with
atomic_add_unless() to ensure that they are executed atomically.
Signed-off-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NTim Shimmin <tes@sgi.com>
Tested-by: NEric Sandeen <sandeen@sandeen.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The problem is introduced by commit
664d080c.

acpi_evaluate_integer is a sleeping function,
and it should not be called with spin_lock_irqsave.
https://bugzilla.redhat.com/show_bug.cgi?id=451399Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This enables short 40-wire detection for my laptop thus
enabling UDMA/100.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Some BIOSen enable DIPM via _GTF which causes command timeouts under
certain configuration.  This didn't occur on 2.6.25 because 2.6.25
defaulted to SRST, so _GTF wasn't executed during boot probe, so ahci
host reset disabled DIPM and as _GTF wasn't executed after SRST, DIPM
wasn't enabled.  On 2.6.26, hardreset is used during probe and after
probe _GTF is executed enabling DIPM and thus the failures.

This patch could theoretically disable DIPM on machines which used to
have it enabled on 2.6.25 but AFAIK ahci is currently the only driver
which uses SATA ACPI hierarchy (_SDD) and as the host reset would have
always disabled DIPM, this shouldn't happen.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The IRQ rate reported back by the RTC is incorrect when HPET is enabled.

Newer hardware that has HPET to emulate the legacy RTC device gets this value
wrong since after it sets the rate, it returns before setting the variable
used to report the IRQ rate back to users of the device -- so the set rate and
the reported rate get out of sync.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Brownell <david-b@pacbell.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch was created by

	git grep -E -l 'Rus(el|s?e)l King' | xargs -r -t perl -p -i -e 's/Rus(el|s?e)l King/Russell King/g'
Signed-off-by: NUwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Most-Definitely-Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix RapidIO device reference counting.
Signed-of-by: NEugene Surovegin <ebs@ebshome.net>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds Intel TPM TIS device HID:  ICO0102
Signed-off-by: NMarcin Obara <marcin_obara@users.sourceforge.net>
Acked-by: NMarcel Selhorst <tpm@selhorst.net>
Acked-by: NRajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  tun: Persistent devices can get stuck in xoff state
  xfrm: Add a XFRM_STATE_AF_UNSPEC flag to xfrm_usersa_info
  ipv6: missed namespace context in ipv6_rthdr_rcv
  netlabel: netlink_unicast calls kfree_skb on error path by itself
  ipv4: fib_trie: Fix lookup error return
  tcp: correct kcalloc usage
  ip: sysctl documentation cleanup
  Documentation: clarify tcp_{r,w}mem sysctl docs
  netfilter: nf_nat_snmp_basic: fix a range check in NAT for SNMP
  netfilter: nf_conntrack_tcp: fix endless loop
  libertas: fix memory alignment problems on the blackfin
  zd1211rw: stop beacons on remove_interface
  rt2x00: Disable synchronization during initialization
  rc80211_pid: Fix fast_start parameter handling
  sctp: Add documentation for sctp sysctl variable
  ipv6: fix race between ipv6_del_addr and DAD timer
  irda: Fix netlink error path return value
  irda: New device ID for nsc-ircc
  irda: via-ircc proper dma freeing
  sctp: Mark the tsn as received after all allocations finish
  ...

The scenario goes like this. App stops reading from tun/tap.
TX queue gets full and driver does netif_stop_queue().
App closes fd and TX queue gets flushed as part of the cleanup.
Next time the app opens tun/tap and starts reading from it but
the xoff state is not cleared. We're stuck.
Normally xoff state is cleared when netdev is brought up. But
in the case of persistent devices this happens only during
initial setup.

The fix is trivial. If device is already up when an app opens
it we clear xoff state and that gets things moving again.
Signed-off-by: NMax Krasnyansky <maxk@qualcomm.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>