The runtime pm sequence is different depending on whether or
not the platform supports ATPX dGPU power control.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

ATPX dGPU power control requires a 200ms delay between
power off and on.  This should fix dGPU failures on
resume from power off.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The presence of the power control method should be determined
via the presence of the method in function 0.  However, some
sbioses only set the appropriate bits in function 1 so use
then to override a missing power control function.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Windows 10 (and some 8.1) systems use standardized
ACPI calls for hybrid laptops to control dGPU power.
Detect those cases and disable the AMD specific ATPX
power control.
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NEdmondo Tommasina <edmondo.tommasina@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Must wait for SERDES idle before exiting RLC SAFEMODE
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The maximum OD percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The maximum OD percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The maximum OD percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The maximum OD percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements mclk OverDrive(OD) through sysfs.
The new entry pp_mclk_od is read/write. The value of input/output
is an integer of the overclocking percentage.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch makes powercontainment feature configurable. Currently, the
powercontainment is not very stable, so add a module parameter to
enable/disable it via user mode.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove the job reference counting and just properly destroy it from a
work item which blocks on any potential running timeout handler.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise the locking becomes rather confusing.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The driver shouldn't mess with the scheduler internals.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remembering the code path in a variable to cleanup
differently is usually not a good idea at all.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Ther should be a new line between code and decleration.
Also use amdgpu_ib_free() instead of releasing the member manually.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need for double housekeeping here.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Completely pointless and confusing to use a callback
to call into the same code file.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: fix even more
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This extends OD (OverDrive) support to the non-Powerplay code paths.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This extends dpm clock level selection to the non-powerplay code paths.
This interface can be used to select individual clock levels.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Based on Alex's patches this enables GFX PG on CZ.

Tested with xonotic-glx/glxgears/supertuxkart and idle desktop.
Also read-back registers via umr for verificiation that the bits
are truly enabled.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the logic for enabling/disabling.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements powergating support for CZ/ST asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add some new GFX powergating flags.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So they can be shared with other asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This sets up the CP jump table and GDS buffer and sets the
PG state registers.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The size needs to handle the CP JT and GDS.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The size needs to handle the CP JT and GDS.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements sclk overdrive(OD) overclocking support for Polaris10,
and the maximum overdrive percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements sclk overdrive(OD) overclocking support for Tonga,
and the maximum overdrive percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements sclk overdrive(OD) overclocking support for Fiji,
and the maximum overdrive percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a new sysfs entry pp_sclk_od to support sclk overdrive(OD) overclocking,
the entry is read/write, the value of input/output is an integer which is the
over percentage of the highest sclk.

v2: drop extra semicolon
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The power tables on some variants require different firmware.
This may fix stability issues on some newer CI parts.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91880Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The power tables on some variants require different firmware.
This may fix stability issues on some newer SI parts.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The power tables on some variants require different firmware.
This fixes stability issues on some newer CI parts.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91880Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This help fix reloading driver hang issue of SDMA
ring.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>