1. 15 11月, 2014 1 次提交
    • J
      Revert "fast_hash: avoid indirect function calls" · a77f9c5d
      Jay Vosburgh 提交于
      This reverts commit e5a2c899.
      
      	Commit e5a2c899 introduced an alternative_call, arch_fast_hash2,
      that selects between __jhash2 and __intel_crc4_2_hash based on the
      X86_FEATURE_XMM4_2.
      
      	Unfortunately, the alternative_call system does not appear to be
      suitable for use with C functions, as register usage is not handled
      properly for the called functions.  The __jhash2 function in particular
      clobbers registers that are not preserved when called via
      alternative_call, resulting in a panic for direct callers of
      arch_fast_hash2 on older CPUs lacking sse4_2.  It is possible that
      __intel_crc4_2_hash works merely by chance because it uses fewer
      registers.
      
      	This commit was suggested as the source of the problem by Jesse
      Gross <jesse@nicira.com>.
      Signed-off-by: NJay Vosburgh <jay.vosburgh@canonical.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a77f9c5d
  2. 14 11月, 2014 39 次提交
    • P
      openvswitch: Fix build failure. · 8cd4313a
      Pravin B Shelar 提交于
      Add dependency on INET to fix following build error. I have also
      fixed MPLS dependency.
      
      ERROR: "ip_route_output_flow" [net/openvswitch/openvswitch.ko]
      undefined!
      make[1]: *** [__modpost] Error 1
      Reported-by: NJim Davis <jim.epost@gmail.com>
      Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8cd4313a
    • D
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 076ce448
      David S. Miller 提交于
      Conflicts:
      	drivers/net/ethernet/chelsio/cxgb4vf/sge.c
      	drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
      
      sge.c was overlapping two changes, one to use the new
      __dev_alloc_page() in net-next, and one to use s->fl_pg_order in net.
      
      ixgbe_phy.c was a set of overlapping whitespace changes.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      076ce448
    • L
      Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost · b23dc5a7
      Linus Torvalds 提交于
      Pull virtio bugfix from Michael S Tsirkin:
       "This fixes a crash in virtio console multi-channel mode that got
        introduced in -rc1"
      
      * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
        virtio_console: move early VQ enablement
      b23dc5a7
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 5cf52037
      Linus Torvalds 提交于
      Pull networking fixes from David Miller:
      
       1) sunhme driver lacks DMA mapping error checks, based upon a report by
          Meelis Roos.
      
       2) Fix memory leak in mvpp2 driver, from Sudip Mukherjee.
      
       3) DMA memory allocation sizes are wrong in systemport ethernet driver,
          fix from Florian Fainelli.
      
       4) Fix use after free in mac80211 defragmentation code, from Johannes
          Berg.
      
       5) Some networking uapi headers missing from Kbuild file, from Stephen
          Hemminger.
      
       6) TUN driver gets csum_start offset wrong when VLAN accel is enabled,
          and macvtap has a similar bug, from Herbert Xu.
      
       7) Adjust several tunneling drivers to set dev->iflink after registry,
          because registry sets that to -1 overwriting whatever we did.  From
          Steffen Klassert.
      
       8) Geneve forgets to set inner tunneling type, causing GSO segmentation
          to fail on some NICs.  From Jesse Gross.
      
       9) Fix several locking bugs in stmmac driver, from Fabrice Gasnier and
          Giuseppe CAVALLARO.
      
      10) Fix spurious timeouts with NewReno on low traffic connections, from
          Marcelo Leitner.
      
      11) Fix descriptor updates in enic driver, from Govindarajulu
          Varadarajan.
      
      12) PPP calls bpf_prog_create() with locks held, which isn't kosher.
          Fix from Takashi Iwai.
      
      13) Fix NULL deref in SCTP with malformed INIT packets, from Daniel
          Borkmann.
      
      14) psock_fanout selftest accesses past the end of the mmap ring, fix
          from Shuah Khan.
      
      15) Fix PTP timestamping for VLAN packets, from Richard Cochran.
      
      16) netlink_unbind() calls in netlink pass wrong initial argument, from
          Hiroaki SHIMODA.
      
      17) vxlan socket reuse accidently reuses a socket when the address
          family is different, so we have to explicitly check this, from
          Marcelo Lietner.
      
      18) Fix missing include in nft_reject_bridge.c breaking the build on ppc
          and other architectures, from Guenter Roeck.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
        vxlan: Do not reuse sockets for a different address family
        smsc911x: power-up phydev before doing a software reset.
        lib: rhashtable - Remove weird non-ASCII characters from comments
        net/smsc911x: Fix delays in the PHY enable/disable routines
        net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode
        netlink: Properly unbind in error conditions.
        net: ptp: fix time stamp matching logic for VLAN packets.
        cxgb4 : dcb open-lldp interop fixes
        selftests/net: psock_fanout seg faults in sock_fanout_read_ring()
        net: bcmgenet: apply MII configuration in bcmgenet_open()
        net: bcmgenet: connect and disconnect from the PHY state machine
        net: qualcomm: Fix dependency
        ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx
        net: phy: Correctly handle MII ioctl which changes autonegotiation.
        ipv6: fix IPV6_PKTINFO with v4 mapped
        net: sctp: fix memory leak in auth key management
        net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet
        net: ppp: Don't call bpf_prog_create() in ppp_lock
        net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set
        cxgb4 : Fix bug in DCB app deletion
        ...
      5cf52037
    • L
      Merge branch 'akpm' (fixes from Andrew Morton) · 971ad4e4
      Linus Torvalds 提交于
      Merge misc fixes from Andrew Morton:
       "15 fixes"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        MAINTAINERS: add IIO include files
        kernel/panic.c: update comments for print_tainted
        mem-hotplug: reset node present pages when hot-adding a new pgdat
        mem-hotplug: reset node managed pages when hot-adding a new pgdat
        mm/debug-pagealloc: correct freepage accounting and order resetting
        fanotify: fix notification of groups with inode & mount marks
        mm, compaction: prevent infinite loop in compact_zone
        mm: alloc_contig_range: demote pages busy message from warn to info
        mm/slab: fix unalignment problem on Malta with EVA due to slab merge
        mm/page_alloc: restrict max order of merging on isolated pageblock
        mm/page_alloc: move freepage counting logic to __free_one_page()
        mm/page_alloc: add freepage on isolate pageblock to correct buddy list
        mm/page_alloc: fix incorrect isolation behavior by rechecking migratetype
        mm/compaction: skip the range until proper target pageblock is met
        zram: avoid kunmap_atomic() of a NULL pointer
      971ad4e4
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client · b0ab3f19
      Linus Torvalds 提交于
      Pull Ceph fixes from Sage Weil:
       "There is an overflow bug fix for cephfs from Zheng, a fix for handling
        large authentication ticket buffers in libceph from Ilya, and a few
        fixes for the request handling code from Ilya that affect RBD volumes"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
        libceph: change from BUG to WARN for __remove_osd() asserts
        libceph: clear r_req_lru_item in __unregister_linger_request()
        libceph: unlink from o_linger_requests when clearing r_osd
        libceph: do not crash on large auth tickets
        ceph: fix flush tid comparision
      b0ab3f19
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid · 6b07974a
      Linus Torvalds 提交于
      Pull HID fixes from Jiri Kosina:
      
       - fix for an oops in HID core upon repeated subdriver insertion/removal
         under certain circumstances, by Benjamin Tissoires
      
       - quirk for another Elan Touchscreen device, by Adel Gadllah
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
        HID: core: cleanup .claimed field on disconnect
        HID: usbhid: enable always-poll quirk for Elan Touchscreen 0103
      6b07974a
    • D
      MAINTAINERS: add IIO include files · 8fe671fc
      Daniel Baluta 提交于
      Files under include/linux/iio were not reported as part of the IIO
      subsystem.
      Signed-off-by: NDaniel Baluta <daniel.baluta@intel.com>
      Reported-by: NCristina Ciocan <cristina.ciocan@intel.com>
      Reviewed-by: NJingoo Han <jg1.han@samsung.com>
      Cc: Hartmut Knaack <knaack.h@gmx.de>
      Cc: Lars-Peter Clausen <lars@metafoo.de>
      Cc: Peter Meerwald <pmeerw@pmeerw.net>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8fe671fc
    • X
      kernel/panic.c: update comments for print_tainted · bc53a3f4
      Xie XiuQi 提交于
      Commit 69361eef ("panic: add TAINT_SOFTLOCKUP") added the 'L' flag,
      but failed to update the comments for print_tainted().  So, update the
      comments.
      Signed-off-by: NXie XiuQi <xiexiuqi@huawei.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bc53a3f4
    • T
      mem-hotplug: reset node present pages when hot-adding a new pgdat · 0bd85420
      Tang Chen 提交于
      When memory is hot-added, all the memory is in offline state.  So clear
      all zones' present_pages because they will be updated in online_pages()
      and offline_pages().  Otherwise, /proc/zoneinfo will corrupt:
      
      When the memory of node2 is offline:
      
        # cat /proc/zoneinfo
        ......
        Node 2, zone   Movable
        ......
              spanned  8388608
              present  8388608
              managed  0
      
      When we online memory on node2:
      
        # cat /proc/zoneinfo
        ......
        Node 2, zone   Movable
        ......
              spanned  8388608
              present  16777216
              managed  8388608
      Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
      Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: <stable@vger.kernel.org>	[3.16+]
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      0bd85420
    • T
      mem-hotplug: reset node managed pages when hot-adding a new pgdat · f784a3f1
      Tang Chen 提交于
      In free_area_init_core(), zone->managed_pages is set to an approximate
      value for lowmem, and will be adjusted when the bootmem allocator frees
      pages into the buddy system.
      
      But free_area_init_core() is also called by hotadd_new_pgdat() when
      hot-adding memory.  As a result, zone->managed_pages of the newly added
      node's pgdat is set to an approximate value in the very beginning.
      
      Even if the memory on that node has node been onlined,
      /sys/device/system/node/nodeXXX/meminfo has wrong value:
      
        hot-add node2 (memory not onlined)
        cat /sys/device/system/node/node2/meminfo
        Node 2 MemTotal:       33554432 kB
        Node 2 MemFree:               0 kB
        Node 2 MemUsed:        33554432 kB
        Node 2 Active:                0 kB
      
      This patch fixes this problem by reset node managed pages to 0 after
      hot-adding a new node.
      
      1. Move reset_managed_pages_done from reset_node_managed_pages() to
         reset_all_zones_managed_pages()
      2. Make reset_node_managed_pages() non-static
      3. Call reset_node_managed_pages() in hotadd_new_pgdat() after pgdat
         is initialized
      Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
      Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: <stable@vger.kernel.org>	[3.16+]
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f784a3f1
    • J
      mm/debug-pagealloc: correct freepage accounting and order resetting · 57cbc87e
      Joonsoo Kim 提交于
      One thing I did in this patch is fixing freepage accounting.  If we
      clear guard page and link it onto isolate buddy list, we should not
      increase freepage count.  This patch adds conditional branch to skip
      counting in this case.  Without this patch, this overcounting happens
      frequently if guard order is set and CMA is used.
      
      Another thing fixed in this patch is the target to reset order.  In
      __free_one_page(), we check the buddy page whether it is a guard page or
      not.  And, if so, we should clear guard attribute on the buddy page and
      reset order of it to 0.  But, current code resets original page's order
      rather than buddy one's.  Maybe, this doesn't have any problem, because
      whole merged page's order will be re-assigned soon.  But, it is better
      to correct code.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      57cbc87e
    • J
      fanotify: fix notification of groups with inode & mount marks · 8edc6e16
      Jan Kara 提交于
      fsnotify() needs to merge inode and mount marks lists when notifying
      groups about events so that ignore masks from inode marks are reflected
      in mount mark notifications and groups are notified in proper order
      (according to priorities).
      
      Currently the sorting of the lists done by fsnotify_add_inode_mark() /
      fsnotify_add_vfsmount_mark() and fsnotify() differed which resulted
      ignore masks not being used in some cases.
      
      Fix the problem by always using the same comparison function when
      sorting / merging the mark lists.
      
      Thanks to Heinrich Schuchardt for improvements of my patch.
      
      Link: https://bugzilla.kernel.org/show_bug.cgi?id=87721Signed-off-by: NJan Kara <jack@suse.cz>
      Reported-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
      Tested-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8edc6e16
    • V
      mm, compaction: prevent infinite loop in compact_zone · 1d5bfe1f
      Vlastimil Babka 提交于
      Several people have reported occasionally seeing processes stuck in
      compact_zone(), even triggering soft lockups, in 3.18-rc2+.
      
      Testing a revert of commit e14c720e ("mm, compaction: remember
      position within pageblock in free pages scanner") fixed the issue,
      although the stuck processes do not appear to involve the free scanner.
      
      Finally, by code inspection, the bug was found in isolate_migratepages()
      which uses a slightly different condition to detect if the migration and
      free scanners have met, than compact_finished().  That has not been a
      problem until commit e14c720e allowed the free scanner position
      between individual invocations to be in the middle of a pageblock.
      
      In a relatively rare case, the migration scanner position can end up at
      the beginning of a pageblock, with the free scanner position in the
      middle of the same pageblock.  If it's the migration scanner's turn,
      isolate_migratepages() exits immediately (without updating the
      position), while compact_finished() decides to continue compaction,
      resulting in a potentially infinite loop.  The system can recover only
      if another process creates enough high-order pages to make the watermark
      checks in compact_finished() pass.
      
      This patch fixes the immediate problem by bumping the migration
      scanner's position to meet the free scanner in isolate_migratepages(),
      when both are within the same pageblock.  This causes compact_finished()
      to terminate properly.  A more robust check in compact_finished() is
      planned as a cleanup for better future maintainability.
      
      Fixes: e14c720e ("mm, compaction: remember position within pageblock in free pages scanner)
      Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
      Reported-by: NP. Christeas <xrg@linux.gr>
      Tested-by: NP. Christeas <xrg@linux.gr>
      Link: http://marc.info/?l=linux-mm&m=141508604232522&w=2Reported-by: NNorbert Preining <preining@logic.at>
      Tested-by: NNorbert Preining <preining@logic.at>
      Link: https://lkml.org/lkml/2014/11/4/904Reported-by: NPavel Machek <pavel@ucw.cz>
      Link: https://lkml.org/lkml/2014/11/7/164
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1d5bfe1f
    • M
      mm: alloc_contig_range: demote pages busy message from warn to info · dae803e1
      Michal Nazarewicz 提交于
      Having test_pages_isolated failure message as a warning confuses users
      into thinking that it is more serious than it really is.  In reality, if
      called via CMA, allocation will be retried so a single
      test_pages_isolated failure does not prevent allocation from succeeding.
      
      Demote the warning message to an info message and reformat it such that
      the text "failed" does not appear and instead a less worrying "PFNS
      busy" is used.
      
      This message is trivially reproducible on a 10GB x86 machine on 3.16.y
      kernels configured with CONFIG_DMA_CMA.
      Signed-off-by: NMichal Nazarewicz <mina86@mina86.com>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Cc: Peter Hurley <peter@hurleysoftware.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      dae803e1
    • J
      mm/slab: fix unalignment problem on Malta with EVA due to slab merge · 95069ac8
      Joonsoo Kim 提交于
      Unlike SLUB, sometimes, object isn't started at the beginning of the
      slab in SLAB.  This causes the unalignment problem after slab merging is
      supported by commit 12220dea ("mm/slab: support slab merge").
      
      Following is the report from Markos that fail to boot on Malta with EVA.
      
          Calibrating delay loop... 19.86 BogoMIPS (lpj=99328)
          pid_max: default: 32768 minimum: 301
          Mount-cache hash table entries: 4096 (order: 0, 16384 bytes)
          Mountpoint-cache hash table entries: 4096 (order: 0, 16384 bytes)
          Kernel bug detected[#1]:
          CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-05639-g12220dea #1631
          task: 1f04f5d8 ti: 1f050000 task.ti: 1f050000
          epc   : 80141190 alloc_unbound_pwq+0x234/0x304
              Not tainted
          ra    : 80141184 alloc_unbound_pwq+0x228/0x304
          Process swapper/0 (pid: 1, threadinfo=1f050000, task=1f04f5d8, tls=00000000)
          Call Trace:
            alloc_unbound_pwq+0x234/0x304
            apply_workqueue_attrs+0x11c/0x294
            __alloc_workqueue_key+0x23c/0x470
            init_workqueues+0x320/0x400
            do_one_initcall+0xe8/0x23c
            kernel_init_freeable+0x9c/0x224
            kernel_init+0x10/0x100
            ret_from_kernel_thread+0x14/0x1c
          [ end trace cb88537fdc8fa200 ]
          Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
      
      alloc_unbound_pwq() allocates slab object from pool_workqueue.  This
      kmem_cache requires 256 bytes alignment, but, current merging code
      doesn't honor that, and merge it with kmalloc-256.  kmalloc-256 requires
      only cacheline size alignment so that above failure occurs.  However, in
      x86, kmalloc-256 is luckily aligned in 256 bytes, so the problem didn't
      happen on it.
      
      To fix this problem, this patch introduces alignment mismatch check in
      find_mergeable().  This will fix the problem.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Reported-by: NMarkos Chandras <Markos.Chandras@imgtec.com>
      Tested-by: NMarkos Chandras <Markos.Chandras@imgtec.com>
      Acked-by: NChristoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      95069ac8
    • J
      mm/page_alloc: restrict max order of merging on isolated pageblock · 3c605096
      Joonsoo Kim 提交于
      Current pageblock isolation logic could isolate each pageblock
      individually.  This causes freepage accounting problem if freepage with
      pageblock order on isolate pageblock is merged with other freepage on
      normal pageblock.  We can prevent merging by restricting max order of
      merging to pageblock order if freepage is on isolate pageblock.
      
      A side-effect of this change is that there could be non-merged buddy
      freepage even if finishing pageblock isolation, because undoing
      pageblock isolation is just to move freepage from isolate buddy list to
      normal buddy list rather than to consider merging.  So, the patch also
      makes undoing pageblock isolation consider freepage merge.  When
      un-isolation, freepage with more than pageblock order and it's buddy are
      checked.  If they are on normal pageblock, instead of just moving, we
      isolate the freepage and free it in order to get merged.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Heesub Shin <heesub.shin@samsung.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Ritesh Harjani <ritesh.list@gmail.com>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3c605096
    • J
      mm/page_alloc: move freepage counting logic to __free_one_page() · 8f82b55d
      Joonsoo Kim 提交于
      All the caller of __free_one_page() has similar freepage counting logic,
      so we can move it to __free_one_page().  This reduce line of code and
      help future maintenance.
      
      This is also preparation step for "mm/page_alloc: restrict max order of
      merging on isolated pageblock" which fix the freepage counting problem
      on freepage with more than pageblock order.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Heesub Shin <heesub.shin@samsung.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Ritesh Harjani <ritesh.list@gmail.com>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      8f82b55d
    • J
      mm/page_alloc: add freepage on isolate pageblock to correct buddy list · 51bb1a40
      Joonsoo Kim 提交于
      In free_pcppages_bulk(), we use cached migratetype of freepage to
      determine type of buddy list where freepage will be added.  This
      information is stored when freepage is added to pcp list, so if
      isolation of pageblock of this freepage begins after storing, this
      cached information could be stale.  In other words, it has original
      migratetype rather than MIGRATE_ISOLATE.
      
      There are two problems caused by this stale information.
      
      One is that we can't keep these freepages from being allocated.
      Although this pageblock is isolated, freepage will be added to normal
      buddy list so that it could be allocated without any restriction.  And
      the other problem is incorrect freepage accounting.  Freepages on
      isolate pageblock should not be counted for number of freepage.
      
      Following is the code snippet in free_pcppages_bulk().
      
          /* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
          __free_one_page(page, page_to_pfn(page), zone, 0, mt);
          trace_mm_page_pcpu_drain(page, 0, mt);
          if (likely(!is_migrate_isolate_page(page))) {
              __mod_zone_page_state(zone, NR_FREE_PAGES, 1);
              if (is_migrate_cma(mt))
                  __mod_zone_page_state(zone, NR_FREE_CMA_PAGES, 1);
          }
      
      As you can see above snippet, current code already handle second
      problem, incorrect freepage accounting, by re-fetching pageblock
      migratetype through is_migrate_isolate_page(page).
      
      But, because this re-fetched information isn't used for
      __free_one_page(), first problem would not be solved.  This patch try to
      solve this situation to re-fetch pageblock migratetype before
      __free_one_page() and to use it for __free_one_page().
      
      In addition to move up position of this re-fetch, this patch use
      optimization technique, re-fetching migratetype only if there is isolate
      pageblock.  Pageblock isolation is rare event, so we can avoid
      re-fetching in common case with this optimization.
      
      This patch also correct migratetype of the tracepoint output.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: NMinchan Kim <minchan@kernel.org>
      Acked-by: NMichal Nazarewicz <mina86@mina86.com>
      Acked-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Heesub Shin <heesub.shin@samsung.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Ritesh Harjani <ritesh.list@gmail.com>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      51bb1a40
    • J
      mm/page_alloc: fix incorrect isolation behavior by rechecking migratetype · ad53f92e
      Joonsoo Kim 提交于
      Before describing bugs itself, I first explain definition of freepage.
      
       1. pages on buddy list are counted as freepage.
       2. pages on isolate migratetype buddy list are *not* counted as freepage.
       3. pages on cma buddy list are counted as CMA freepage, too.
      
      Now, I describe problems and related patch.
      
      Patch 1: There is race conditions on getting pageblock migratetype that
      it results in misplacement of freepages on buddy list, incorrect
      freepage count and un-availability of freepage.
      
      Patch 2: Freepages on pcp list could have stale cached information to
      determine migratetype of buddy list to go.  This causes misplacement of
      freepages on buddy list and incorrect freepage count.
      
      Patch 4: Merging between freepages on different migratetype of
      pageblocks will cause freepages accouting problem.  This patch fixes it.
      
      Without patchset [3], above problem doesn't happens on my CMA allocation
      test, because CMA reserved pages aren't used at all.  So there is no
      chance for above race.
      
      With patchset [3], I did simple CMA allocation test and get below
      result:
      
       - Virtual machine, 4 cpus, 1024 MB memory, 256 MB CMA reservation
       - run kernel build (make -j16) on background
       - 30 times CMA allocation(8MB * 30 = 240MB) attempts in 5 sec interval
       - Result: more than 5000 freepage count are missed
      
      With patchset [3] and this patchset, I found that no freepage count are
      missed so that I conclude that problems are solved.
      
      On my simple memory offlining test, these problems also occur on that
      environment, too.
      
      This patch (of 4):
      
      There are two paths to reach core free function of buddy allocator,
      __free_one_page(), one is free_one_page()->__free_one_page() and the
      other is free_hot_cold_page()->free_pcppages_bulk()->__free_one_page().
      Each paths has race condition causing serious problems.  At first, this
      patch is focused on first type of freepath.  And then, following patch
      will solve the problem in second type of freepath.
      
      In the first type of freepath, we got migratetype of freeing page
      without holding the zone lock, so it could be racy.  There are two cases
      of this race.
      
       1. pages are added to isolate buddy list after restoring orignal
          migratetype
      
          CPU1                                   CPU2
      
          get migratetype => return MIGRATE_ISOLATE
          call free_one_page() with MIGRATE_ISOLATE
      
                                      grab the zone lock
                                      unisolate pageblock
                                      release the zone lock
      
          grab the zone lock
          call __free_one_page() with MIGRATE_ISOLATE
          freepage go into isolate buddy list,
          although pageblock is already unisolated
      
      This may cause two problems.  One is that we can't use this page anymore
      until next isolation attempt of this pageblock, because freepage is on
      isolate buddy list.  The other is that freepage accouting could be wrong
      due to merging between different buddy list.  Freepages on isolate buddy
      list aren't counted as freepage, but ones on normal buddy list are
      counted as freepage.  If merge happens, buddy freepage on normal buddy
      list is inevitably moved to isolate buddy list without any consideration
      of freepage accouting so it could be incorrect.
      
       2. pages are added to normal buddy list while pageblock is isolated.
          It is similar with above case.
      
      This also may cause two problems.  One is that we can't keep these
      freepages from being allocated.  Although this pageblock is isolated,
      freepage would be added to normal buddy list so that it could be
      allocated without any restriction.  And the other problem is same as
      case 1, that it, incorrect freepage accouting.
      
      This race condition would be prevented by checking migratetype again
      with holding the zone lock.  Because it is somewhat heavy operation and
      it isn't needed in common case, we want to avoid rechecking as much as
      possible.  So this patch introduce new variable, nr_isolate_pageblock in
      struct zone to check if there is isolated pageblock.  With this, we can
      avoid to re-check migratetype in common case and do it only if there is
      isolated pageblock or migratetype is MIGRATE_ISOLATE.  This solve above
      mentioned problems.
      
      Changes from v3:
      Add one more check in free_one_page() that checks whether migratetype is
      MIGRATE_ISOLATE or not. Without this, abovementioned case 1 could happens.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: NMinchan Kim <minchan@kernel.org>
      Acked-by: NMichal Nazarewicz <mina86@mina86.com>
      Acked-by: NVlastimil Babka <vbabka@suse.cz>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Heesub Shin <heesub.shin@samsung.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Ritesh Harjani <ritesh.list@gmail.com>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      ad53f92e
    • J
      mm/compaction: skip the range until proper target pageblock is met · 58420016
      Joonsoo Kim 提交于
      Commit 7d49d886 ("mm, compaction: reduce zone checking frequency in
      the migration scanner") has a side-effect that changes the iteration
      range calculation.  Before the change, block_end_pfn is calculated using
      start_pfn, but now it blindly adds pageblock_nr_pages to the previous
      value.
      
      This causes the problem that isolation_start_pfn is larger than
      block_end_pfn when we isolate the page with more than pageblock order.
      In this case, isolation would fail due to an invalid range parameter.
      
      To prevent this, this patch implements skipping the range until a proper
      target pageblock is met.  Without this patch, CMA with more than
      pageblock order always fails but with this patch it will succeed.
      Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      58420016
    • W
      zram: avoid kunmap_atomic() of a NULL pointer · c4065152
      Weijie Yang 提交于
      zram could kunmap_atomic() a NULL pointer in a rare situation: a zram
      page becomes a full-zeroed page after a partial write io.  The current
      code doesn't handle this case and performs kunmap_atomic() on a NULL
      pointer, which panics the kernel.
      
      This patch fixes this issue.
      Signed-off-by: NWeijie Yang <weijie.yang@samsung.com>
      Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
      Cc: Dan Streetman <ddstreet@ieee.org>
      Cc: Nitin Gupta <ngupta@vflare.org>
      Cc: Weijie Yang <weijie.yang.kh@gmail.com>
      Acked-by: NJerome Marchand <jmarchan@redhat.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c4065152
    • E
      tcp: limit GSO packets to half cwnd · d649a7a8
      Eric Dumazet 提交于
      In DC world, GSO packets initially cooked by tcp_sendmsg() are usually
      big, as sk_pacing_rate is high.
      
      When network is congested, cwnd can be smaller than the GSO packets
      found in socket write queue. tcp_write_xmit() splits GSO packets
      using the available cwnd, and we end up sending a single GSO packet,
      consuming all available cwnd.
      
      With GRO aggregation on the receiver, we might handle a single GRO
      packet, sending back a single ACK.
      
      1) This single ACK might be lost
         TLP or RTO are forced to attempt a retransmit.
      2) This ACK releases a full cwnd, sender sends another big GSO packet,
         in a ping pong mode.
      
      This behavior does not fill the pipes in the best way, because of
      scheduling artifacts.
      
      Make sure we always have at least two GSO packets in flight.
      
      This allows us to safely increase GRO efficiency without risking
      spurious retransmits.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Acked-by: NNeal Cardwell <ncardwell@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d649a7a8
    • M
      vxlan: Do not reuse sockets for a different address family · 19ca9fc1
      Marcelo Leitner 提交于
      Currently, we only match against local port number in order to reuse
      socket. But if this new vxlan wants an IPv6 socket and a IPv4 one bound
      to that port, vxlan will reuse an IPv4 socket as IPv6 and a panic will
      follow. The following steps reproduce it:
      
         # ip link add vxlan6 type vxlan id 42 group 229.10.10.10 \
             srcport 5000 6000 dev eth0
         # ip link add vxlan7 type vxlan id 43 group ff0e::110 \
             srcport 5000 6000 dev eth0
         # ip link set vxlan6 up
         # ip link set vxlan7 up
         <panic>
      
      [    4.187481] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
      ...
      [    4.188076] Call Trace:
      [    4.188085]  [<ffffffff81667c4a>] ? ipv6_sock_mc_join+0x3a/0x630
      [    4.188098]  [<ffffffffa05a6ad6>] vxlan_igmp_join+0x66/0xd0 [vxlan]
      [    4.188113]  [<ffffffff810a3430>] process_one_work+0x220/0x710
      [    4.188125]  [<ffffffff810a33c4>] ? process_one_work+0x1b4/0x710
      [    4.188138]  [<ffffffff810a3a3b>] worker_thread+0x11b/0x3a0
      [    4.188149]  [<ffffffff810a3920>] ? process_one_work+0x710/0x710
      
      So address family must also match in order to reuse a socket.
      Reported-by: NJean-Tsung Hsiao <jhsiao@redhat.com>
      Signed-off-by: NMarcelo Ricardo Leitner <mleitner@redhat.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      19ca9fc1
    • T
      rhashtable: Drop gfp_flags arg in insert/remove functions · 6eba8224
      Thomas Graf 提交于
      Reallocation is only required for shrinking and expanding and both rely
      on a mutex for synchronization and callers of rhashtable_init() are in
      non atomic context. Therefore, no reason to continue passing allocation
      hints through the API.
      
      Instead, use GFP_KERNEL and add __GFP_NOWARN | __GFP_NORETRY to allow
      for silent fall back to vzalloc() without the OOM killer jumping in as
      pointed out by Eric Dumazet and Eric W. Biederman.
      Signed-off-by: NThomas Graf <tgraf@suug.ch>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6eba8224
    • D
      Merge branch 'mlx4-next' · 64bb7e99
      David S. Miller 提交于
      Or Gerlitz says:
      
      ====================
      mlx4: Flexible (asymmetric) allocation of EQs and MSI-X vectors
      
      This series from Matan Barak is built as follows:
      
      The 1st two patches fix small bugs w.r.t firmware spec. Next
      are two patches which do more re-factoring of the init/fini flow
      and a patch that adds support for the QUERY_FUNC firmware command,
      these are all pre-steps for the major patch of the series. In this
      patch (#6) we change the order of talking/querying the firmware
      and enabling SRIOV. This allows to remote worst-case assumption
      w.r.t the number of available MSI-X vectors and EQs per function.
      
      The last patch easily enjoys this ordering change, to enable
      supports > 64 VFs over a firmware that allows for that.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      64bb7e99
    • M
      net/mlx4_core: Support more than 64 VFs · de966c59
      Matan Barak 提交于
      We now allow up to 126 VFs. Note though that certain firmware
      versions only allow up to 80 VFs. Moreover, old HCAs only support 64 VFs.
      In these cases, we limit the maximum number of VFs to 64.
      Signed-off-by: NMatan Barak <matanb@mellanox.com>
      Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      de966c59
    • M
      net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs · 7ae0e400
      Matan Barak 提交于
      Previously, the driver queried the firmware in order to get the number
      of supported EQs. Under SRIOV, since this was done before the driver
      notified the firmware how many VFs it actually needs, the firmware had
      to take into account a worst case scenario and always allocated four EQs
      per VF, where one was used for events while the others were used for completions.
      
      Now, when the firmware supports the asymmetric allocation scheme, denoted
      by exposing num_sys_eqs > 0 (--> MLX4_DEV_CAP_FLAG2_SYS_EQS), we use the
      QUERY_FUNC command to query the firmware before enabling SRIOV. Thus we
      can get more EQs and MSI-X vectors per function.
      
      Moreover, when running in the new firmware/driver mode, the limitation
      that the number of EQs should be a power of two is lifted.
      Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
      Signed-off-by: NMatan Barak <matanb@mellanox.com>
      Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7ae0e400
    • M
      net/mlx4_core: Add QUERY_FUNC firmware command · e8c4265b
      Matan Barak 提交于
      QUERY_FUNC firmware command could be used in order to query the
      number of EQs, reserved EQs, etc for a specific function.
      Signed-off-by: NMatan Barak <matanb@mellanox.com>
      Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e8c4265b
    • M
      net/mlx4_core: Refactor mlx4_load_one · a0eacca9
      Matan Barak 提交于
      Refactor mlx4_load_one, as a preparation step for a new and
      more complicated load function. The goal is to support both
      newer firmware that required init_hca to be done before
      enable_sriov and legacy firmwares that requires things to
      be done the other way around.
      Signed-off-by: NMatan Barak <matanb@mellanox.com>
      Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a0eacca9
    • M
      net/mlx4_core: Refactor mlx4_cmd_init and mlx4_cmd_cleanup · ffc39f6d
      Matan Barak 提交于
      Refactoring mlx4_cmd_init and mlx4_cmd_cleanup such that partial init
      and cleanup are possible. After this refactoring, calling mlx4_cmd_init
      several times is safe.
      
      This is necessary in the VF init flow when mlx4_init_hca returns -EACCESS,
      we need to issue cleanup and re-attempt to call it with the slave flag.
      Signed-off-by: NMatan Barak <matanb@mellanox.com>
      Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ffc39f6d
    • M
      net/mlx4_core: Use correct variable type for mlx4_slave_cap · 225c6c8c
      Matan Barak 提交于
      We've used an incorrect type for the loop counter and the
      mlx4_QUERY_FUNC_CAP function. The current input modifier
      is either a port or a boolean.
      Since the number of ports is always a positive value < 255,
      we should use u8 instead of an integer with casting.
      Signed-off-by: NMatan Barak <matanb@mellanox.com>
      Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      225c6c8c
    • M
      net/mlx4_core: Fix wrong reading of reserved_eqs · 7c68dd43
      Matan Barak 提交于
      We mistakenly read the reserved_eqs field as a standard
      numeric value rather than a log2 value.
      Signed-off-by: NMatan Barak <matanb@mellanox.com>
      Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7c68dd43
    • D
      Merge branch 'rhash_prove_locking' · 9cf5476b
      David S. Miller 提交于
      Herbert Xu says:
      
      ====================
      rhashtable: Allow local locks to be used and tested
      
      This series moves mutex_is_held entirely under PROVE_LOCKING so
      there is zero foot print when we're not debugging.  More importantly
      it adds a parrent argument to mutex_is_held so that we can test
      local locks rather than global ones (e.g., per-namespace locks).
      ====================
      Acked-by: NThomas Graf <tgraf@suug.ch>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9cf5476b
    • H
      rhashtable: Add parent argument to mutex_is_held · 7b4ce235
      Herbert Xu 提交于
      Currently mutex_is_held can only test locks in the that are global
      since it takes no arguments.  This prevents rhashtable from being
      used in places where locks are lock, e.g., per-namespace locks.
      
      This patch adds a parent field to mutex_is_held and rhashtable_params
      so that local locks can be used (and tested).
      Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7b4ce235
    • H
      rhashtable: Move mutex_is_held under PROVE_LOCKING · 1b2f309d
      Herbert Xu 提交于
      The rhashtable function mutex_is_held is only used when PROVE_LOCKING
      is enabled.  This patch makes the mutex_is_held field in rhashtable
      optional depending on PROVE_LOCKING.
      Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1b2f309d
    • H
      netfilter: Move mutex_is_held under PROVE_LOCKING · 1f501d62
      Herbert Xu 提交于
      The rhashtable function mutex_is_held is only used when PROVE_LOCKING
      is enabled.  This patch modifies netfilter so that we can rhashtable.h
      itself can later make mutex_is_held optional depending on PROVE_LOCKING.
      Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1f501d62
    • H
      netlink: Move mutex_is_held under PROVE_LOCKING · 97127566
      Herbert Xu 提交于
      The rhashtable function mutex_is_held is only used when PROVE_LOCKING
      is enabled.  This patch modifies netlink so that we can rhashtable.h
      itself can later make mutex_is_held optional depending on PROVE_LOCKING.
      Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      97127566
    • E
      smsc911x: power-up phydev before doing a software reset. · ccf899a2
      Enric Balletbo i Serra 提交于
      With commit be9dad1f ("net: phy: suspend phydev when going
      to HALTED"), the PHY device will be put in a low-power mode using
      BMCR_PDOWN if the the interface is set down. The smsc911x driver does
      a software_reset opening the device driver (ndo_open). In such case,
      the PHY must be powered-up before access to any register and before
      calling the software_reset function. Otherwise, as the PHY is powered
      down the software reset fails and the interface can not be enabled
      again.
      
      This patch fixes this scenario that is easy to reproduce setting down
      the network interface and setting up again.
      
          $ ifconfig eth0 down
          $ ifconfig eth0 up
          ifconfig: SIOCSIFFLAGS: Input/output error
      Signed-off-by: NEnric Balletbo i Serra <eballetbo@iseebcn.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ccf899a2