commit 7366aeb77cd840f3edea02c65065d40affaa7f45 upstream.

GPU hang observed during the guest OCL conformance test which is caused
by THP GTT feature used durning the test.

It was observed the same GFN with different size (4K and 2M) requested
from the guest in GVT. So during the guest page dma map stage, it is
required to unmap first with orginal size and then remap again with
requested size.

Fixes: b901b252 ("drm/i915/gvt: Add 2M huge gtt support")
Cc: stable@vger.kernel.org
Reviewed-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NXiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 09b90e2fe35faeace2488234e2a7728f2ea8ba26 ]

In nouveau_conn_reset(), if connector->state is true,
__drm_atomic_helper_connector_destroy_state() will be called,
but the memory pointed by asyc isn't freed. Memory leak happens
in the following function __drm_atomic_helper_connector_reset(),
where newly allocated asyc->state will be assigned to connector->state.

So using nouveau_conn_atomic_destroy_state() instead of
__drm_atomic_helper_connector_destroy_state to free the "old" asyc.

Here the is the log showing memory leak.

unreferenced object 0xffff8c5480483c80 (size 192):
  comm "kworker/0:2", pid 188, jiffies 4294695279 (age 53.179s)
  hex dump (first 32 bytes):
    00 f0 ba 7b 54 8c ff ff 00 00 00 00 00 00 00 00  ...{T...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000005005c0d0>] kmem_cache_alloc_trace+0x195/0x2c0
    [<00000000a122baed>] nouveau_conn_reset+0x25/0xc0 [nouveau]
    [<000000004fd189a2>] nouveau_connector_create+0x3a7/0x610 [nouveau]
    [<00000000c73343a8>] nv50_display_create+0x343/0x980 [nouveau]
    [<000000002e2b03c3>] nouveau_display_create+0x51f/0x660 [nouveau]
    [<00000000c924699b>] nouveau_drm_device_init+0x182/0x7f0 [nouveau]
    [<00000000cc029436>] nouveau_drm_probe+0x20c/0x2c0 [nouveau]
    [<000000007e961c3e>] local_pci_probe+0x47/0xa0
    [<00000000da14d569>] work_for_cpu_fn+0x1a/0x30
    [<0000000028da4805>] process_one_work+0x27c/0x660
    [<000000001d415b04>] worker_thread+0x22b/0x3f0
    [<0000000003b69f1f>] kthread+0x12f/0x150
    [<00000000c94c29b7>] ret_from_fork+0x3a/0x50
Signed-off-by: NYongxin Liu <yongxin.liu@windriver.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4368a1539c6b41ac3cddc06f5a5117952998804c ]

add_display_components() calls of_platform_populate, and we depopluate
on pdev remove, but not when probe fails. So if we get a probe deferral
in one of the components, we won't depopulate the platform. This causes
the core to keep references to devices which should be destroyed, which
causes issues when those same devices try to re-initialize on the next
probe attempt.

I think this is the reason we had issues with the gmu's device-managed
resources on deferral (worked around in commit 94e3a17f33a5).
Reviewed-by: NRob Clark <robdclark@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-3-sean@poorly.runSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 99b9683f2142b20bad78e61f7f829e8714e45685 ]

When fixing up the clock in vop_crtc_mode_fixup() we're not doing it
quite correctly.  Specifically if we've got the true clock 266666667 Hz,
we'll perform this calculation:
   266666667 / 1000 => 266666

Later when we try to set the clock we'll do clk_set_rate(266666 *
1000).  The common clock framework won't actually pick the proper clock
in this case since it always wants clocks <= the specified one.

Let's solve this by using DIV_ROUND_UP.

Fixes: b59b8de3 ("drm/rockchip: return a true clock rate to adjusted_mode")
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NYakir Yang <ykk@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614224730.98622-1-dianders@chromium.orgSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 88099f53cc3717437f5fc9cf84205c5b65118377 ]

this patch fixes below compilation error

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c: In
function ‘dcn10_apply_ctx_for_surface’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:2378:3:
error: implicit declaration of function ‘udelay’
[-Werror=implicit-function-declaration]
   udelay(underflow_check_delay_us);
Signed-off-by: NHariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9ff3a5c88e1f1ab17a31402b96d45abe14aab9d7 ]

After data is copied to the cache entry, atomic_set is used indicate
that the data is the entry is valid without appropriate memory barriers.
Similarly the read side was missing the corresponding memory barriers.
Signed-off-by: NDavid Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190610211810.253227-5-davidriley@chromium.orgSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f04bee34d6e35df26cbb2d65e801adfd0d8fe20d ]

[Why]
Unlike our regular connectors, MST connectors don't start off with
an initial connector state. This causes a NULL pointer dereference to
occur when attaching the bpc property since it tries to modify the
connector state.

We need an initial connector state on the connector to avoid the crash.

[How]
Use our reset helper to allocate an initial state and reset the values
to their defaults. We were already doing this before, just not for
MST connectors.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d99004d7201aa653658ff2390d6e516567c96ebc ]

I. was. blind.

Caught with vkms, which has some really slow crc computation function.

Fixes: 1882018a70e0 ("drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry")
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606211544.5389-1-daniel.vetter@ffwll.chSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1882018a70e06376234133e69ede9dd743b4dbd9 ]

We can be called from any context, we need to be prepared.

Noticed this while hacking on vkms, which calls this function from a
normal worker. Which really upsets lockdep.

Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605194556.16744-1-daniel.vetter@ffwll.chSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1e390478cfb527e34c9ab89ba57212cb05c33c51 ]

Recent versions of the DMA API debug code have started to warn about
violations of the maximum DMA segment size. This is because the segment
size defaults to 64 KiB, which can easily be exceeded in large buffer
allocations such as used in DRM/KMS for framebuffers.

Technically the Tegra SMMU and ARM SMMU don't have a maximum segment
size (they map individual pages irrespective of whether they are
contiguous or not), so the choice of 4 MiB is a bit arbitrary here. The
maximum segment size is a 32-bit unsigned integer, though, so we can't
set it to the correct maximum size, which would be the size of the
aperture.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8dbfc5b65023b67397aca28e8adb25c819f6398c ]

The pixel clock unit in the first two registers (0x00 and 0x01) of
sii9022 is 10kHz, not 1kHz as in struct drm_display_mode. Division by
10 fixes the issue.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1a2a8eae0b9d6333e7a5841026bf7fd65c9ccd09.1558964241.git.jsarha@ti.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3231573065ad4f4ecc5c9147b24f29f846dc0c2f ]

We need to know the link bandwidth to filter out modes we cannot
support, so we need to have read the display props before doing the
filtering.

To ensure we have up to date display props, call tc_get_display_props()
in the beginning of tc_connector_get_modes().
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-22-tomi.valkeinen@ti.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9f1f1a2dab38d4ce87a13565cf4dc1b73bef3a5f ]

In drm_load_edid_firmware(), fwstr is allocated by kstrdup(). And fwstr
is dereferenced in the following codes. However, memory allocation
functions such as kstrdup() may fail and returns NULL. Dereferencing
this null pointer may cause the kernel go wrong. Thus we should check
this kstrdup() operation.
Further, if kstrdup() returns NULL, we should return ERR_PTR(-ENOMEM) to
the caller site.
Signed-off-by: NGen Zhang <blackgod016574@gmail.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524023222.GA5302@zhanggen-UX430UQSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 065e4bdfa1f3ab2884c110394d8b7e7ebe3b988c ]

Previous codes assumes there are two sdma engines.
This is not true e.g., Raven only has 1 SDMA engine.
Fix the issue by using sdma engine number info in
device_info.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e73390d181103a19e1111ec2f25559a0570e9fe0 ]

Free mqd_mem_obj it GTT buffer allocation for MQD+control stack fails.
Signed-off-by: NOak Zeng <ozeng@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1090d58d4815b1fcd95a80987391006c86398b4c ]

[Why]
When disable driver, OS will set backlight optimization
then do stop device.  But this flag will cause driver to
enable ABM when driver disabled.

[How]
Send ABM disable command before destroy ABM construct
Signed-off-by: NPaul Hsieh <paul.hsieh@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fe2b5323d2c3cedaa3bf943dc7a0d233c853c914 ]

it requires to initialize HDP_NONSURFACE_BASE, so as to avoid
using the value left by a previous VM under sriov scenario.

v2: it should not hurt baremetal, generalize it for both sriov
and baremetal
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Signed-off-by: NTiecheng Zhou <Tiecheng.Zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1352c779cb74d427f4150cbe779a2f7886f70cae ]

[Why]
An assertion is thrown when using SURFACE_PIXEL_FORMAT_GRPH_RGB565
formats on DCE since the prescale_params->scale wasn't being filled.

Found by a dmesg-fail when running the
igt@kms_plane@pixel-format-pipe-a-planes test on Baffin.

[How]
Fill in the scale parameter.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7ad9db66fafb0f0ad53fd2a66217105da5ddeffe ]

In case mipi_dsi_attach() fails remove the registered panel to avoid added
panel without corresponding device.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226081153.31334-1-peter.ujfalusi@ti.comSigned-off-by: NSasha Levin <sashal@kernel.org>

commit 3d1f62c686acdedf5ed9642b763f3808d6a47d1e upstream.

The saturation bit was being set at bit 9 in the second 32-bit word
of the TPMEM CSC. This isn't correct, the saturation bit is bit 42,
which is bit 10 of the second word.

Fixes: 1aa8ea0d ("gpu: ipu-v3: Add Image Converter unit")
Signed-off-by: NSteve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e28ad544f462231d3fd081a7316339359efbb481 upstream.

DisplayID blocks allow embedding of CEA blocks. The payloads are
identical to traditional top level CEA extension blocks, but the header
is slightly different.

This change allows the CEA parser to find a CEA block inside a DisplayID
block. Additionally, it adds support for parsing the embedded CTA
header. No further changes are necessary due to payload parity.

This change fixes audio support for the Valve Index HMD.
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619180901.17901-1-andresx7@gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7cb95eeea6706c790571042a06782e378b2561ea upstream.

It turns out that while disabling i2c bus access from software when the
GPU is suspended was a step in the right direction with:

commit 342406e4fbba ("drm/nouveau/i2c: Disable i2c bus access after
->fini()")

We also ended up accidentally breaking the vbios init scripts on some
older Tesla GPUs, as apparently said scripts can actually use the i2c
bus. Since these scripts are executed before initializing any
subdevices, we end up failing to acquire access to the i2c bus which has
left a number of cards with their fan controllers uninitialized. Luckily
this doesn't break hardware - it just means the fan gets stuck at 100%.

This also means that we've always been using our i2c busses before
initializing them during the init scripts for older GPUs, we just didn't
notice it until we started preventing them from being used until init.
It's pretty impressive this never caused us any issues before!

So, fix this by initializing our i2c pad and busses during subdev
pre-init. We skip initializing aux busses during pre-init, as those are
guaranteed to only ever be used by nouveau for DP aux transactions.
Signed-off-by: NLyude Paul <lyude@redhat.com>
Tested-by: NMarc Meledandri <m.meledandri@gmail.com>
Fixes: 342406e4fbba ("drm/nouveau/i2c: Disable i2c bus access after ->fini()")
Cc: stable@vger.kernel.org
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6ecac85eadb9d4065b9038fa3d3c66d49038e14b upstream.

This should help with some of the lifetime issues, and move us away
from load/unload.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405031715.5959-4-airlied@gmail.comSigned-off-by: NRoss Zwisler <zwisler@google.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit ac3b35f11a06964f5fe7f6ea9a190a28a7994704 upstream.

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926120212.25359-1-tzimmermann@suse.deSigned-off-by: NRoss Zwisler <zwisler@google.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit fd96e0dba19c53c2d66f2a398716bb74df8ca85e upstream.

This just makes it easier to later embed drm into udl.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405031715.5959-3-airlied@gmail.comSigned-off-by: NRoss Zwisler <zwisler@google.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 74b67efa8d7b4f90137f0ab9a80dd319da050350 ]

The copy_from_user() function returns the number of bytes remaining
to be copied but we want to return a negative error code.  Otherwise
the callers treat it as a successful copy.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618131843.GA29463@mwandaSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 39916897cd815a0ee07ba1f6820cf88a63e459fc ]

Booting up with DMA_API_DEBUG_SG=y generates a warning due to the driver
forgot to set dma_parms appropriately. Set it just after vmw_dma_masks()
in vmw_driver_load().

DMA-API: vmwgfx 0000:00:0f.0: mapping sg segment longer than device
claims to support [len=2097152] [max=65536]
WARNING: CPU: 2 PID: 261 at kernel/dma/debug.c:1232
debug_dma_map_sg+0x360/0x480
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop
Reference Platform, BIOS 6.00 04/13/2018
RIP: 0010:debug_dma_map_sg+0x360/0x480
Call Trace:
 vmw_ttm_map_dma+0x3b1/0x5b0 [vmwgfx]
 vmw_bo_map_dma+0x25/0x30 [vmwgfx]
 vmw_otables_setup+0x2a8/0x750 [vmwgfx]
 vmw_request_device_late+0x78/0xc0 [vmwgfx]
 vmw_request_device+0xee/0x4e0 [vmwgfx]
 vmw_driver_load.cold+0x757/0xd84 [vmwgfx]
 drm_dev_register+0x1ff/0x340 [drm]
 drm_get_pci_dev+0x110/0x290 [drm]
 vmw_probe+0x15/0x20 [vmwgfx]
 local_pci_probe+0x7a/0xc0
 pci_device_probe+0x1b9/0x290
 really_probe+0x1b5/0x630
 driver_probe_device+0xa3/0x1a0
 device_driver_attach+0x94/0xa0
 __driver_attach+0xdd/0x1c0
 bus_for_each_dev+0xfe/0x150
 driver_attach+0x2d/0x40
 bus_add_driver+0x290/0x350
 driver_register+0xdc/0x1d0
 __pci_register_driver+0xda/0xf0
 vmwgfx_init+0x34/0x1000 [vmwgfx]
 do_one_initcall+0xe5/0x40a
 do_init_module+0x10f/0x3a0
 load_module+0x16a5/0x1a40
 __se_sys_finit_module+0x183/0x1c0
 __x64_sys_finit_module+0x43/0x50
 do_syscall_64+0xc8/0x606
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: fb1d9738 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU")
Co-developed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NQian Cai <cai@lca.pw>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bde15555ba61c7f664f40fd3c6fdbdb63f784c9b ]

When building sg tables, honor the device sg list segment size limitation.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NDeepak Rawat <drawat@vmware.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6ab20a05f4c7ed45632e24d5397d6284e192567d ]

It's now safe to let fbcon unbind automatically on fbdev unregister.
The crash problem was fixed in commit 2122b40580dd
("fbdev: fbcon: Fix unregister crash when more than one framebuffer")
Signed-off-by: NNoralf Trønnes <noralf@tronnes.org>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190210131039.52664-13-noralf@tronnes.orgSigned-off-by: NSasha Levin <sashal@kernel.org>

commit 5aeab2bfc9ffa72d3ca73416635cb3785dfc076f upstream.

The event will be sent as part of the vblank enable during the modeset
if the crtc is not being kept disabled.

Fixes: 5f2f9115 ("drm/imx: atomic phase 3 step 1: Use atomic configuration")
Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 78c68e8f5cd24bd32ba4ca1cdfb0c30cf0642685 upstream.

Notify drm core before sending pending events during crtc disable.
This fixes the first event after disable having an old stale timestamp
by having drm_crtc_vblank_off update the timestamp to now.

This was seen while debugging weston log message:
Warning: computed repaint delay is insane: -8212 msec

This occurred due to:
1. driver starts up
2. fbcon comes along and restores fbdev, enabling vblank
3. vblank_disable_fn fires via timer disabling vblank, keeping vblank
seq number and time set at current value
(some time later)
4. weston starts and does a modeset
5. atomic commit disables crtc while it does the modeset
6. ipu_crtc_atomic_disable sends vblank with old seq number and time

Fixes: a4744786 ("drm/imx: fix crtc vblank state regression")
Signed-off-by: NRobert Beckett <bob.beckett@collabora.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit be132e1375c1fffe48801296279079f8a59a9ed3 upstream.

When something goes wrong in the GPU init after the cmdbuf suballocator
has been constructed, we fail to destroy it properly. This causes havok
later when the GPU is unbound due to a module unload or similar.

Fixes: e66774dd (drm/etnaviv: add cmdbuf suballocator)
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Tested-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 25f09f858835b0e9a06213811031190a17d8ab78 upstream.

Recommended by the hw team.
Reviewed-and-Tested-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f78c581e22d4b33359ac3462e8d0504735df01f4 upstream.

Otherwise, you may get divided-by-zero error or corrput the SMU fan
control feature.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NSlava Abramov <slava.abramov@amd.com>
Acked-by: NSlava Abramov <slava.abramov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bc7b488b1d1c71dc4c5182206911127bc6c410d6 upstream.

While loading the DMC firmware we were double checking the headers made
sense, but in no place we checked that we were actually reading memory
we were supposed to. This could be wrong in case the firmware file is
truncated or malformed.

Before this patch:
	# ls -l /lib/firmware/i915/icl_dmc_ver1_07.bin
	-rw-r--r-- 1 root root  25716 Feb  1 12:26 icl_dmc_ver1_07.bin
	# truncate -s 25700 /lib/firmware/i915/icl_dmc_ver1_07.bin
	# modprobe i915
	# dmesg| grep -i dmc
	[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
	[drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7)

i.e. it loads random data. Now it fails like below:
	[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
	[drm:csr_load_work_fn [i915]] *ERROR* Truncated DMC firmware, rejecting.
	i915 0000:00:02.0: Failed to load DMC firmware i915/icl_dmc_ver1_07.bin. Disabling runtime power management.
	i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915

Before reading any part of the firmware file, validate the input first.

Fixes: eb805623 ("drm/i915/skl: Add support to load SKL CSR firmware.")
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605235535.17791-1-lucas.demarchi@intel.com
(cherry picked from commit bc7b488b1d1c71dc4c5182206911127bc6c410d6)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
[ Lucas: backported to 4.9+ adjusting the context ]
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 652b8b086538c8a10de5aa5cbdaef79333b46358 ]

GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).

Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_micropc data struct may very well need to be updated
with some extra bios-dates in the future.
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524125759.14131-2-hdegoede@redhat.com
(cherry picked from commit f2f2bb60d998abde10de7e483ef9e17639892450)
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 15abc7110a77555d3bf72aaef46d1557db0a4ac5 ]

GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).

Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_pocket2 data struct may very well need to be updated
with some extra bios-dates in the future.

Changes in v2:
-Add one more known BIOS date to the list of BIOS dates

Cc: Jurgen Kramer <gtmkramer@xs4all.nl>
Reported-by: NJurgen Kramer <gtmkramer@xs4all.nl>
Acked-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524125759.14131-1-hdegoede@redhat.com
(cherry picked from commit 6dab9102dd7b144e5723915438e0d6c473018cd0)
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2458d9d6d94be982b917e93c61a89b4426f32e31 ]

mtk_dsi_stop() should be called after mtk_drm_crtc_atomic_disable(), which
needs ovl irq for drm_crtc_wait_one_vblank(), since after mtk_dsi_stop() is
called, ovl irq will be disabled. If drm_crtc_wait_one_vblank() is called
after last irq, it will timeout with this message: "vblank wait timed out
on crtc 0". This happens sometimes when turning off the screen.

In drm_atomic_helper.c#disable_outputs(),
the calling sequence when turning off the screen is:

1. mtk_dsi_encoder_disable()
     --> mtk_output_dsi_disable()
       --> mtk_dsi_stop();  /* sometimes make vblank timeout in
                               atomic_disable */
       --> mtk_dsi_poweroff();
2. mtk_drm_crtc_atomic_disable()
     --> drm_crtc_wait_one_vblank();
     ...
       --> mtk_dsi_ddp_stop()
         --> mtk_dsi_poweroff();

mtk_dsi_poweroff() has reference count design, change to make
mtk_dsi_stop() called in mtk_dsi_poweroff() when refcount is 0.

Fixes: 0707632b ("drm/mediatek: update DSI sub driver flow for sending commands to panel")
Signed-off-by: NHsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: NCK Hu <ck.hu@mediatek.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a4cd1d2b016d5d043ab2c4b9c4ec50a5805f5396 ]

num_pipes is used for mutex created in mtk_drm_crtc_create(). If we
don't clear num_pipes count, when rebinding driver, the count will
be accumulated. From mtk_disp_mutex_get(), there can only be at most
10 mutex id. Clear this number so it starts from 0 in every rebind.

Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: NHsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: NCK Hu <ck.hu@mediatek.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cf49b24ffa62766f8f04cd1c4cf17b75d29b240a ]

shutdown all CRTC when unbinding drm driver.

Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: NHsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: NCK Hu <ck.hu@mediatek.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>