We changed this around in f135af1041f ('nfsd: reorganize nfsd_create')
so "dchild" can't be an error pointer any more.  Also, dchild can't be
NULL here (and dput would already handle this even if it was).
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

We need an fh_verify to make sure we at least have a dentry, but actual
permission checks happen later.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Minor cleanup, no change in behavior.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

vfs_{create,mkdir,mknod} each begin with a call to may_create(), which
returns EEXIST if the object already exists.

This check is therefore unnecessary.

(In the NFSv2 case, nfsd_proc_create also has such a check.  Contrary to
RFC 1094, our code seems to believe that a CREATE of an existing file
should succeed.  I'm leaving that behavior alone.)
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

There's some odd logic in nfsd_create() that allows it to be called with
the parent directory either locked or unlocked.  The only already-locked
caller is NFSv2's nfsd_proc_create().  It's less confusing to split out
the unlocked case into a separate function which the NFSv2 code can call
directly.

Also fix some comments while we're here.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Create and other nfsd ops generally assume we can call lookup_one_len on
inodes with S_IFDIR set.  Al says that this assumption isn't true in
general, though it should be for the filesystem objects nfsd sees.

Add a check just to make sure our assumption isn't violated.

Remove a couple checks for i_op->lookup in create code.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

lookup_one_len already has this check.

The only effect of this patch is to return access instead of perm in the
0-length-filename case.  I actually prefer nfserr_perm (or _inval?), but
I doubt anyone cares.

The isdotent check seems redundant too, but I worry that some client
might actually care about that strange nfserr_exist error.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

When doing a create (mkdir/mknod) on a name, it's worth
checking the name exists first before returning EACCES in case
the directory is not writeable by the user.
This makes return values on the client more consistent
regardless of whenever the entry there is cached in the local
cache or not.
Another positive side effect is certain programs only expect
EEXIST in that case even despite POSIX allowing any valid
error to be returned.
Signed-off-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The functionality for block device DAX was already removed with commit
acc93d30 ("Revert "block: enable dax for raw block devices"")

However, we still had a config option hanging around that was always
disabled because it depended on CONFIG_BROKEN.  This config option was
introduced in commit 03cdadb0 ("block: disable block device DAX by
default")

This change reverts that commit, removing the dead config option.

Link: http://lkml.kernel.org/r/20160729182314.6368-1-ross.zwisler@linux.intel.comSigned-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can't pass error pointers to kfree() or it causes an oops.

Fixes: 52b209f7 ('get rid of hostfs_read_inode()')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Jeff Mahoney's cleanup commit (14a1e067) wasn't correct for csums on
machines where the pagesize >= metadata blocksize.

This just reverts the relevant hunks to bring the old math back.
Signed-off-by: NChris Mason <clm@fb.com>

With gcc < 4.2 (e.g. 4.1.2):

      CC      fs/proc/task_mmu.o
    cc1: error: unrecognized command line option "-Wno-override-init"

To fix this, only enable the compiler option when it is actually
supported by the compiler.

Fixes: ca52953f ("fs/proc/task_mmu.c: suppress compilation warnings with W=1")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

new_insert_key only makes any sense when it's associated with a
new_insert_ptr, which is initialized to NULL and changed to a
buffer_head when we also initialize new_insert_key.  We can key off of
that to avoid the uninitialized warning.

Link: http://lkml.kernel.org/r/5eca5ffb-2155-8df2-b4a2-f162f105efed@suse.comSigned-off-by: NJeff Mahoney <jeffm@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The header file "include/linux/nilfs2_fs.h" is composed of parts for
ioctl and disk format, and both are intended to be shared with user
space programs.

This moves them to the uapi directory "include/uapi/linux" splitting the
file to "nilfs2_api.h" and "nilfs2_ondisk.h".  The following minor
changes are accompanied by this migration:

 - nilfs_direct_node struct in nilfs2/direct.h is converged to
   nilfs2_ondisk.h because it's an on-disk structure.
 - inline functions nilfs_rec_len_from_disk() and
   nilfs_rec_len_to_disk() are moved to nilfs2/dir.c.

Link: http://lkml.kernel.org/r/1465825507-3407-4-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace bit shifts by BIT macro for clarity.

Link: http://lkml.kernel.org/r/1465825507-3407-3-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Variables ns_seg_seq, ns_segnum, ns_nextnum, ns_pseg_offset, ns_cno,
ns_ctime, ns_nongc_ctime, and ns_ndirtyblks, are protected by
ns_segctor_sem, but ns_sem is wrongly used by the nilfs sysfs code when
reading these variables.  This fixes the misuse and clarifies which
semaphore protects them in the comment of the_nilfs struct.

Link: http://lkml.kernel.org/r/1465825507-3407-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move parser of snapshot mount option to a separate function
nilfs_parse_snapshot_option(), replace simple_strtoull() with
kstrtoull() to avoid checkpatch.pl warning "WARNING: simple_strtoull is
obsolete, use kstrtoull instead", and refine the error message of the
parser.

Link: http://lkml.kernel.org/r/1464875891-5443-9-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use cond_resched() instead of yield() in the loop of
nilfs_transaction_lock() since the usage corresponds to the "be nice for
others" case that the comment of yield() says.

This removes the following checkpatch.pl warning:

 "WARNING: Using yield() is generally wrong. See yield() kernel-doc
  (sched/core.c)"

Link: http://lkml.kernel.org/r/1464875891-5443-8-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When nilfs returned -EIO as an error code, it's not always clear if it
came from the underlying block device or not.  This will mend the issue
by having low level I/O routines of nilfs output an error message when
they detected an I/O error.

Link: http://lkml.kernel.org/r/1464875891-5443-7-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use nilfs_msg() to output warning messages and get rid of
nilfs_warning() function.  This also removes function names from the
messages unless we embed them explicitly in format strings.  Instead,
some messages are revised to clarify the context.

[arnd@arndb.de: avoid warning about unused variables]
  Link: http://lkml.kernel.org/r/20160615201945.3348205-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/1464875891-5443-6-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace most use of printk() in nilfs2 implementation with nilfs_msg(),
and reduce the following checkpatch.pl warning:

  "WARNING: Prefer [subsystem eg: netdev]_crit([subsystem]dev, ...
   then dev_crit(dev, ... then pr_crit(...  to printk(KERN_CRIT ..."

This patch also fixes a minor checkpatch warning "WARNING: quoted string
split across lines" that often accompanies the prior warning, and amends
message format as needed.

Link: http://lkml.kernel.org/r/1464875891-5443-5-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Insert a back pointer to super block instance in nilfs object so that
functions of nilfs2 easily refer to the super block instance.  This
simplifies replacement of printk() in the successive change.

Link: http://lkml.kernel.org/r/1464875891-5443-4-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Define an own output routine to replace bare use of printk() function.
The output routine is implemented with a macro and a helper function,
which are named nilfs_msg() and __nilfs_msg(), respectively.

__nilfs_msg() formats a message like "NILFS (<device-name>): <message>",
prefixing it with a given log level, and terminates the statement with a
newline.  The "device-name" is optional to make it available in early
stages; it will be omitted if a NULL pointer is passed to super block
instance argument.  nilfs_msg() wraps __nilfs_msg() and is removed if
CONFIG_PRINTK is not set.

Link: http://lkml.kernel.org/r/1464875891-5443-3-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simplify nilfs_error(), an output function used to report critical
issues in file system.  This renames the original nilfs_error() function
to __nilfs_error() and redefines it as a macro to hide its function name
argument within the macro.

Every call site of nilfs_error() is changed to strip __func__ argument
except nilfs_bmap_convert_error(); nilfs_bmap_convert_error() directly
calls __nilfs_error() because it inherits caller's function name.

Link: http://lkml.kernel.org/r/1464875891-5443-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since the -Wincompatible-pointer-types is reported as error, alpha
doesn't build anymore.  Let's fix it in a minimal way.

  fs/binfmt_em86.c:73:35: error: passing argument 2 of `copy_strings_kernel' from incompatible pointer type [-Werror=incompatible-pointer-types]
     retval = copy_strings_kernel(1, &i_arg, bprm);
                                     ^            ^
  fs/binfmt_em86.c:77:34: error: passing argument 2 of `copy_strings_kernel' from incompatible pointer type [-Werror=incompatible-pointer-types]
    retval = copy_strings_kernel(1, &i_name, bprm);
                                    ^

Link: http://lkml.kernel.org/r/1469525978-23359-1-git-send-email-wagi@monom.orgSigned-off-by: NDaniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A double-bug exists in the bss calculation code, where an overflow can
happen in the "last_bss - elf_bss" calculation, but vm_brk internally
aligns the argument, underflowing it, wrapping back around safe.  We
shouldn't depend on these bugs staying in sync, so this cleans up the
bss padding handling to avoid the overflow.

This moves the bss padzero() before the last_bss > elf_bss case, since
the zero-filling of the ELF_PAGE should have nothing to do with the
relationship of last_bss and elf_bss: any trailing portion should be
zeroed, and a zero size is already handled by padzero().

Then it handles the math on elf_bss vs last_bss correctly.  These need
to both be ELF_PAGE aligned to get the comparison correct, since that's
the expected granularity of the mappings.  Since elf_bss already had
alignment-based padding happen in padzero(), the "start" of the new
vm_brk() should be moved forward as done in the original code.  However,
since the "end" of the vm_brk() area will already become PAGE_ALIGNed in
vm_brk() then last_bss should get aligned here to avoid hiding it as a
side-effect.

Additionally makes a cosmetic change to the initial last_bss calculation
so it's easier to read in comparison to the load_addr calculation above
it (i.e.  the only difference is p_filesz vs p_memsz).

Link: http://lkml.kernel.org/r/1468014494-25291-2-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Reported-by: NHector Marco-Gisbert <hecmargi@upv.es>
Cc: Ismael Ripoll Ripoll <iripoll@upv.es>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Chen Gang <gang.chen.5i5j@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some systems are memory constrained but they need to load very large
firmwares.  The firmware subsystem allows drivers to request this
firmware be loaded from the filesystem, but this requires that the
entire firmware be loaded into kernel memory first before it's provided
to the driver.  This can lead to a situation where we map the firmware
twice, once to load the firmware into kernel memory and once to copy the
firmware into the final resting place.

This creates needless memory pressure and delays loading because we have
to copy from kernel memory to somewhere else.  Let's add a
request_firmware_into_buf() API that allows drivers to request firmware
be loaded directly into a pre-allocated buffer.  This skips the
intermediate step of allocating a buffer in kernel memory to hold the
firmware image while it's read from the filesystem.  It also requires
that drivers know how much memory they'll require before requesting the
firmware and negates any benefits of firmware caching because the
firmware layer doesn't manage the buffer lifetime.

For a 16MB buffer, about half the time is spent performing a memcpy from
the buffer to the final resting place.  I see loading times go from
0.081171 seconds to 0.047696 seconds after applying this patch.  Plus
the vmalloc pressure is reduced.

This is based on a patch from Vikram Mulukutla on codeaurora.org:
  https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.18/commit/drivers/base/firmware_class.c?h=rel/msm-3.18&id=0a328c5f6cd999f5c591f172216835636f39bcb5

Link: http://lkml.kernel.org/r/20160607164741.31849-4-stephen.boyd@linaro.orgSigned-off-by: NStephen Boyd <stephen.boyd@linaro.org>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Vikram Mulukutla <markivx@codeaurora.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Suppress a bunch of warnings of the form:

  fs/proc/task_mmu.c: In function 'show_smap_vma_flags':
  fs/proc/task_mmu.c:635:22: warning: initialized field overwritten [-Wt override-init]
     [ilog2(VM_READ)] = "rd",
                        ^~~~
  fs/proc/task_mmu.c:635:22: note: (near initialization for 'mnemonics[0]')

They happen because of the way we intentionally build the table, so
silence the warning when building with 'make W=1'.

Link: http://lkml.kernel.org/r/8727.1470022083@turing-police.cc.vt.eduSigned-off-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/proc/stat shows (among lots of other things) the current boottime (i.e.
number of seconds since boot).  While a 32-bit number is sufficient for
this particular case, we want to get rid of the 'struct timespec'
suffers from a 32-bit overflow in 2038.

This changes the code to use a struct timespec64, which is known to be
safe in all cases.

Link: http://lkml.kernel.org/r/20160617201247.2292101-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This was needed before to ensure that ->signal != 0 and do_each_thread()
is safe, see commit b95c35e7 ("oom: fix the unsafe usage of
badness() in proc_oom_score()") for details.

Today tsk->signal can't go away and for_each_thread(tsk) is always safe.

Link: http://lkml.kernel.org/r/20160608211921.GA15508@redhat.comSigned-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Radix trees may be used not only for storing page cache pages, so
unconditionally accounting radix tree nodes to the current memory cgroup
is bad: if a radix tree node is used for storing data shared among
different cgroups we risk pinning dead memory cgroups forever.

So let's only account radix tree nodes if it was explicitly requested by
passing __GFP_ACCOUNT to INIT_RADIX_TREE.  Currently, we only want to
account page cache entries, so mark mapping->page_tree so.

Fixes: 58e698af ("radix-tree: account radix_tree_node to memory cgroup")
Link: http://lkml.kernel.org/r/1470057188-7864-1-git-send-email-vdavydov@virtuozzo.comSigned-off-by: NVladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>	[4.6+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We found a dlm-blocked situation caused by continuous breakdown of
recovery masters described below.  To solve this problem, we should
purge recovery lock once detecting recovery master goes down.

N3                      N2                   N1(reco master)
                        go down
                                             pick up recovery lock and
                                             begin recoverying for N2

                                             go down

pick up recovery
lock failed, then
purge it:
dlm_purge_lockres
  ->DROPPING_REF is set

send deref to N1 failed,
recovery lock is not purged

find N1 go down, begin
recoverying for N1, but
blocked in dlm_do_recovery
as DROPPING_REF is set:
dlm_do_recovery
  ->dlm_pick_recovery_master
    ->dlmlock
      ->dlm_get_lock_resource
        ->__dlm_wait_on_lockres_flags(tmpres,
	  	DLM_LOCK_RES_DROPPING_REF);

Fixes: 8c034396 ("ocfs2/dlm: clear DROPPING_REF flag when the master goes down")
Link: http://lkml.kernel.org/r/578453AF.8030404@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NJiufei Xue <xuejiufei@huawei.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We found a BUG situation that lockres is migrated during deref described
below.  To solve the BUG, we could purge lockres directly when other
node says I did not have a ref.  Additionally, we'd better purge lockres
if master goes down, as no one will response deref done.

Node 1                  Node 2(old master)             Node3(new master)
dlm_purge_lockres
send deref to N2

                        leave domain
                        migrate lockres to N3
                                                       finish migration
                                                       send do assert
                                                       master to N1

receive do assert msg
form N3, but can not
find lockres because
DROPPING_REF is set,
so the owner is still
N2.

                        receive deref from N1
                        and response -EINVAL
                        because lockres is migrated

BUG when receive -EINVAL
in dlm_drop_lockres_ref

Fixes: 842b90b6 ("ocfs2/dlm: return in progress if master can not clear the refmap bit right now")

Link: http://lkml.kernel.org/r/57845103.3070406@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NJiufei Xue <xuejiufei@huawei.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ocfs2/dlm: disable BUG_ON when DLM_LOCK_RES_DROPPING_REF is cleared before dlm_deref_lockres_done_handler

We found a BUG situation in which DLM_LOCK_RES_DROPPING_REF is cleared
unexpected that described below.  To solve the bug, we disable the
BUG_ON and purge lockres in dlm_do_local_recovery_cleanup.

Node 1                               Node 2(master)
dlm_purge_lockres
                                     dlm_deref_lockres_handler

                                     DLM_LOCK_RES_SETREF_INPROG is set
                                     response DLM_DEREF_RESPONSE_INPROG

receive DLM_DEREF_RESPONSE_INPROG
stop puring in dlm_purge_lockres
and wait for DLM_DEREF_RESPONSE_DONE

                                     dispatch dlm_deref_lockres_worker
                                     response DLM_DEREF_RESPONSE_DONE

receive DLM_DEREF_RESPONSE_DONE and
prepare to purge lockres

                                     Node 2 goes down

find Node2 down and do local
clean up for Node2:
dlm_do_local_recovery_cleanup
  -> clear DLM_LOCK_RES_DROPPING_REF

when purging lockres, BUG_ON happens
because DLM_LOCK_RES_DROPPING_REF is clear:
dlm_deref_lockres_done_handler
  ->BUG_ON(!(res->state & DLM_LOCK_RES_DROPPING_REF));

[akpm@linux-foundation.org: fix duplicated write to `ret']
Fixes: 60d663cb ("ocfs2/dlm: add DEREF_DONE message")
Link: http://lkml.kernel.org/r/57845055.9080702@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NJiufei Xue <xuejiufei@huawei.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The testcase "mmaptruncate" in ocfs2 test suite always fails with ENOSPC
error on small volume (say less than 10G).  This testcase repeatedly
performs "extend" and "truncate" on a file.  Continuously, it truncates
the file to 1/2 of the size, and then extends to 100% of the size.  The
main bitmap will quickly run out of space because the "truncate" code
prevent truncate log from being flushed by
ocfs2_schedule_truncate_log_flush(osb, 1), while truncate log may have
cached lots of clusters.

So retry to allocate after flushing truncate log when ENOSPC is
returned.  And we cannot reuse the deleted blocks before the transaction
committed.  Fortunately, we already have a function to do this -
ocfs2_try_to_free_truncate_log().  Just need to remove the "static"
modifier and put it into the right place.

The "unlock"/"lock" code isn't elegant, but there seems to be no better
option.

[zren@suse.com: locking fix]
  Link: http://lkml.kernel.org/r/1468031546-4797-1-git-send-email-zren@suse.com
Link: http://lkml.kernel.org/r/1466586469-5541-1-git-send-email-zren@suse.comSigned-off-by: NEric Ren <zren@suse.com>
Reviewed-by: NGang He <ghe@suse.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We encountered a bug from the customer, the user did a fsck.ocfs2 on the
file system and exited unusually, the lockspace (with LVB size = 32) was
left in the kernel space, next, the user mounted this file system, the
kernel module did not create a new lockspace (LVB size = 64) via calling
dlm_new_lockspace() function in mounting stage, just used the existing
lockspace, created by the user space tool, this would lead the user was
not able to mount this file system from the other nodes, with the error
message like:

  dlm: 032F5......: config mismatch: 64,0 nodeid 177127961: 32,0
  (mount.ocfs2,26981,46):ocfs2_dlm_init:2995 ERROR: status = -71
  ocfs2_mount_volume:1881 ERROR: status = -71
  ocfs2_fill_super:1236 ERROR: status = -71

The user found it very difficult to find the root cause, then, we
brought out this patch to relieve such problem.

First, we add one more flag in calling dlm_new_lockspace() function, to
make sure the lockspace is created by kernel module itself, and this
change will not affect the backward compatibility.

Second, the obvious error message is reported in the kernel log, let the
user be more easy to find the root cause.

This patch will be used to insure the dlm lockspace is created by kernel
module when mounting a ocfs2 file system.  There are two ways to create
a lockspace, from user space and kernel space, but the same name
lockspaces probably have different lvblen lengths/flags.

To avoid this mix using, we add one more flag DLM_LSFL_NEWEXCL, it will
make sure the dlm lockspace is created by kernel module when mounting.
Secondly, if a user space program (ocfs2-tools) is running on a file
system, the user tries to mount this file system in the cluster, DLM
module will return a -EEXIST or -EPROTO errno, we should give the user a
obvious error message, then, the user can let that user space tool exit
before mounting the file system again.

Link: http://lkml.kernel.org/r/1463731940-13044-2-git-send-email-ghe@suse.comSigned-off-by: NGang He <ghe@suse.com>
Reviewed-by: NGoldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMartin Brandenburg <martin@omnibond.com>

Signed-off-by: NMartin Brandenburg <martin@omnibond.com>

Signed-off-by: NMartin Brandenburg <martin@omnibond.com>

The userspace component attempts to do this, but this will prevent
us from even needing to go into userspace to satisfy certain getattr
requests.
Signed-off-by: NMartin Brandenburg <martin@omnibond.com>