Report the destination port GID if connecting fails.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use lockdep_assert_held() statements to verify at run-time
whether the proper locks are held.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Avoid that srp_process_rsp() overwrites the status information
in ch if the SRP target response timed out and processing of
another task management function has already started. Avoid that
issuing multiple task management functions concurrently triggers
list corruption. This patch prevents that the following stack
trace appears in the system log:

WARNING: CPU: 8 PID: 9269 at lib/list_debug.c:52 __list_del_entry_valid+0xbc/0xc0
list_del corruption. prev->next should be ffffc90004bb7b00, but was ffff8804052ecc68
CPU: 8 PID: 9269 Comm: sg_reset Tainted: G        W       4.10.0-rc7-dbg+ #3
Call Trace:
 dump_stack+0x68/0x93
 __warn+0xc6/0xe0
 warn_slowpath_fmt+0x4a/0x50
 __list_del_entry_valid+0xbc/0xc0
 wait_for_completion_timeout+0x12e/0x170
 srp_send_tsk_mgmt+0x1ef/0x2d0 [ib_srp]
 srp_reset_device+0x5b/0x110 [ib_srp]
 scsi_ioctl_reset+0x1c7/0x290
 scsi_ioctl+0x12a/0x420
 sd_ioctl+0x9d/0x100
 blkdev_ioctl+0x51e/0x9f0
 block_ioctl+0x38/0x40
 do_vfs_ioctl+0x8f/0x700
 SyS_ioctl+0x3c/0x70
 entry_SYSCALL_64_fastpath+0x18/0xad
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Steve Feeley <Steve.Feeley@sandisk.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

After srp_process_rsp() returns there is a short time during which
the scsi_host_find_tag() call will return a pointer to the SCSI
command that is being completed. If during that time a duplicate
response is received, avoid that the following call stack appears:

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: srp_recv_done+0x450/0x6b0 [ib_srp]
Oops: 0000 [#1] SMP
CPU: 10 PID: 0 Comm: swapper/10 Not tainted 4.10.0-rc7-dbg+ #1
Call Trace:
 <IRQ>
 __ib_process_cq+0x4b/0xd0 [ib_core]
 ib_poll_handler+0x1d/0x70 [ib_core]
 irq_poll_softirq+0xba/0x120
 __do_softirq+0xba/0x4c0
 irq_exit+0xbe/0xd0
 smp_apic_timer_interrupt+0x38/0x50
 apic_timer_interrupt+0x90/0xa0
 </IRQ>
RIP: srp_recv_done+0x450/0x6b0 [ib_srp] RSP: ffff88046f483e20
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Steve Feeley <Steve.Feeley@sandisk.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Tests have shown that the following error message is reported when
using SG-GAPS registration with an mlx5 adapter:

scsi host1: ib_srp: failed RECV status WR flushed (5) for CQE ffff880bd4270eb0
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 0f007806 2500002a ad9fafd1
scsi host1: ib_srp: reconnect succeeded
mlx5_0:dump_cqe:262:(pid 7369): dump error cqe
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 0f007806 25000032 00105dd0
scsi host1: ib_srp: failed FAST REG status memory management operation error (6) for CQE ffff880b92860138

Hence avoid using SG-GAPS memory registrations. Additionally,
always configure the blk_queue_virt_boundary() to avoid to trigger
a mapping failure when using adapters that support SG-GAPS (e.g.
mlx5).

Fixes: commit ad8e66b4 ("IB/srp: fix mr allocation when the device supports sg gaps")
Fixes: commit 509c5f33 ("IB/srp: Prevent mapping failures")
Reported-by: NLaurence Oberman <loberman@redhat.com>
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Israel Rukshin <israelr@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mark Bloch <markb@mellanox.com>
Cc: Yuval Shaia <yuval.shaia@oracle.com>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: NDoug Ledford <dledford@redhat.com>

'qedr_alloc_pbl_tbl()' can not return NULL.

In qedr_init_user_queue():
 - simplify the test for the return value, no need to test for NULL
 - propagate the error pointer if needed, otherwise 0 (success) is returned.
   This is spurious.

In init_mr_info():
 - test the return value with IS_ERR
 - propagate the error pointer if needed instead of an exlictit -ENOMEM.
   This is a no-op as the only error pointer that we can have here is
   already -ENOMEM
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: NRam Amrani <Ram.Amrani@cavium.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When CONFIG_DCB is disabled, we get a link error:

drivers/infiniband/built-in.o: In function `bnxt_re_setup_qos':
trace.c:(.text+0x155774): undefined reference to `dcb_ieee_getapp_mask'
trace.c:(.text+0x155774): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dcb_ieee_getapp_mask'
trace.c:(.text+0x155794): undefined reference to `dcb_ieee_getapp_mask'
trace.c:(.text+0x155794): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dcb_ieee_getapp_mask'

Like the other drivers that use this function, a Kconfig dependency is
the correct fix.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

I ran into a build error on arm64 randconfig testing:

infiniband/hw/hns/hns_roce_main.c:539:1: error: data definition has no type or storage class [-Werror]
infiniband/hw/hns/hns_roce_main.c:539:1: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' [-Werror=implicit-int]
infiniband/hw/hns/hns_roce_main.c:539:1: error: parameter names (without types) in function declaration [-Werror]
infiniband/hw/hns/hns_roce_main.c:979:226: error: data definition has no type or storage class [-Werror]
infiniband/hw/hns/hns_roce_main.c:979:226: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int]
infiniband/hw/hns/hns_roce_main.c:979:1: error: parameter names (without types) in function declaration [-Werror]

Including the module.h makes it build again.

Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Acked-by: NAdit Ranadive <aditr@vmware.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

.. and greatly clean up the irq handling boilerplate code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NAdit Ranadive <aditr@vmware.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

gcc-7 produces a mysterious warning about the size argument being potentially out
of range:

drivers/infiniband/hw/hfi1/verbs.c: In function 'init_cntr_names':
drivers/infiniband/hw/hfi1/verbs.c:1644:2: error: 'memcpy': specified size between 18446744071562067968 and 18446744073709551615 exceeds maximum object size 9223372036854775807 [-Werror=stringop-overflow=]

This seems to refer to a the case where an 64-bit size_t gets truncated
into a negative 'int' and subsequently turned into a high 64-bit number
again.

The fix is clearly to use size_t here, which matches the type that gets
used for this value elsewhere.

Fixes: b7481944 ("IB/hfi1: Show statistics counters under IB stats interface")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There are 2 labels to mark the same statements. Replace the 2 labels
with one versatile labe.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In the function ipoib_cm_nonsrq_init_rx, the memory is not
allocated successfully. It is not necessary to free it.

CC: Joe Jin <joe.jin@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Trivial switch to the new API for this driver.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Update several usages of kmalloc/user_copy to memdup_copy and
memdup_copy_nul.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Rename RVT AETH defines and export in rdma/ib_hdrs.h
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Return usec from an index into ib_rvt_rnr_table.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If the DC is in shutdown state, the set link state function will return
an error.  Since this is not a failure in this state, make sure to
only call set link state if the DC is on.
Reviewed-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use rate-limit state to limit number of messages logged
to kernel message buffer for DCC errors. Add new macro
dd_dev_info_ratelimited for that propose. Replace all
dd_dev_info calls in handle_dcc_err function with
rate-limited version.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The send complete for RC QPs mismanages the ack count when the
responder side is only in RTR.

A QP in that state cannot send requests, but it can be the target
for operations that elicit responses.

Adjust the RC completion logic to correct the count maintenance
by reflecting RECV_OK in a new state test.
Reviewed-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To improve code reuse, add small SGE state helper routines to rdmavt_mr.h.
Leverage these in hfi1, including refactoring of hfi1_copy_sge.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Convert copy_sge and related SGE state functions to use boolean.
For determining if QP is in user mode, add helper function in rdmavt_qp.h.
This is used to determine if QP needs the last byte ordering.
While here, change rvt_pd.user to a boolean.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Reduce qib code footprint by using the rdmavt timers.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NVenkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Reduce hfi1 code footprint by using the rdmavt timers.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NVenkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To move common code across target to rdmavt for code reuse.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NVenkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add rvt_compute_aeth() and rvt_get_credit() as shared functions in
rdmavt, moved from hfi1/qib logic.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add rvt_rc_error() and rvt_comm_est() as shared functions in
rdmavt, moved from hfi1/qib logic.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The EFI variable that provides board ID is named
by the PCI address of the device, which is published
in upper-case, while the HFI1 driver reads the EFI
variable in lower-case.
This prevents returning the correct board id when
queried through sysfs. Read EFI variables in
upper-case if the lower-case read fails.
Reviewed-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Some fields in struct hfi1_packet are oversized.
Reduce them.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The r_psn and s_rnr_retry are missing.

Add with this patch.
Reviewed-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There are some memory allocation calls in hfi1_create_ctxtdata()
that do not use the numa function parameter. This
can cause cache lines to be filled over QPI.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Having per-CPU reference count for each MR prevents
cache-line bouncing across the system. Thus, it
prevents bottlenecks. Use per-CPU reference counts
per MR.

The per-CPU reference count for FMRs is used in
atomic mode to allow accurate testing of the busy
state. Other MR types run in per-CPU mode MR until
they're freed.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Receive code paths use the QP's device and port
number to access the struct hfi1_ibport. When an
instance of struct hfi1_ctxtdata is present, it can
be used to access struct hfi1_ibport through a pointer.
This makes struct hfi1_ibport lookup time faster as an
array doesn't have to be indexed and access fields in
other cache-lines.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The resource specific wait locking missed correcting the lock
for the notify_error_qp() calldown.

The code is fixed to correctly use the iowait lock field to protect
the head that is protected by that lock.

Fixes: Commit 4e045572 ("IB/hfi1: Add unique txwait_lock for txreq events")
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

After extended testing, it was found that the previous PCIe Gen
3 recipe, which used adaptive CTLE with Preset 4, could cause an
NMI/Surprise Link Down in about 1 in 100 to 1 in 1000 power cycles on
some platforms. New EV data combined with extensive empirical data
indicates that the new recipe should use static CTLE with Preset 6 for
all integrated silicon SKUs.

Fixes: c3f8de0b ("IB/hfi1: Add static PCIe Gen3 CTLE tuning")
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The read of s_head in the hfi1_make_rc_req() and
qib_make_rc_req() lack the necesary barrier instuctions.

Correct other ACCESS_ONCE() warnings in the same file.
Reviewed-by: NAshutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In the event that the IRQ thread is extremely busy, the
processing of an rcd wait list can be delayed by quite
a bit until the IRQ thread completes its work.

The QP reset reference count wait can then appear to be stuck, thus
causing up a QP destroy to emit the hung task diagnostic.

Fix by processing the qp wait list periodically from the thread.  The
interval is a multiple (currently 4) of the MAX_PKT_RECV.

Also, reduce some of the excessive inlining.   The guidelines
are per packet is ok inline, otherwise the choice is based on
likelyhood of execution.
Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The qp_wait_list processing leaves the defered ack count
at its prior value.

This can result in a premature send of an ack.

Fixed by unconditionally reseting the defered ack count
in hfi1_send_rc_ack().

Fixes: Commit 7c091e5c ("staging/rdma/hfi1: add ACK coalescing logic")
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use setup_timer function instead of initializing timer with the function
and data fields.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>