- 06 10月, 2017 15 次提交
-
-
由 Rajat Jain 提交于
We conclude the HW became inaccessible when we timeout waiting for a bit to be set in a memory mapped register (CSR_GP_CNTRL). This conclusion may not be true because the bit may not get set due to: - a firmware issue - a driver issue - a PCI bus issue - a platform issue There are a lot of such reports with really no good debug information beyond this message to help us. Add some debug information and attempt to dump the different register spaces at such a failure: * Dump some configuration space of device - this will tell us if something very basic is broken in the PCIe bus (so that configuration accesses are failing). If this works, the PCIe bus seems OK. If this does not work, it is definitely an PCIe issue. * Dump some memory mapped registers - if we're reading some sane'ish values, this will tell us that the PCIe bus is OK, but may be a firmware / driver issue. If this does not work, it may be a PCI configuration issue or a driver/firmware issue. * Dump parent and device's AER registers, will give us some straws to chew on. This is the sample output: [ 13.082651] ------------[ cut here ]------------ [ 13.086791] iwlwifi 0000:01:00.0: iwlwifi transaction failed, dumping registers [ 13.086793] iwlwifi 0000:01:00.0: iwlwifi device config registers: [ 13.086893] iwlwifi 0000:01:00.0: 00000000: 095a8086 00100406 02800059 00000000 00000004 00000000 00000000 00000000 [ 13.086895] iwlwifi 0000:01:00.0: 00000020: 00000000 00000000 00000000 50108086 00000000 000000c8 00000000 00000100 [ 13.086901] iwlwifi 0000:01:00.0: iwlwifi device memory mapped registers: [ 13.086989] iwlwifi 0000:01:00.0: 00000000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff [ 13.086991] iwlwifi 0000:01:00.0: 00000020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff [ 13.086999] iwlwifi 0000:01:00.0: iwlwifi device AER capability structure: [ 13.087033] iwlwifi 0000:01:00.0: 00000000: 14010001 00100000 00000000 00462031 00002000 00002000 00000014 40000001 [ 13.087034] iwlwifi 0000:01:00.0: 00000020: 0000000f d140000c 00000000 [ 13.087036] iwlwifi 0000:01:00.0: iwlwifi parent port (0000:00:1c.0) config registers: [ 13.087074] iwlwifi 0000:00:1c.0: 00000000: 9d108086 00100506 060400f1 00810010 00000000 00000000 00010100 200000f0 [ 13.087075] iwlwifi 0000:00:1c.0: 00000020: d140d140 0001fff1 00000000 00000000 00000000 00000040 00000000 0006010b [ 13.087087] ------------[ cut here ]------------ [ 13.087095] WARNING: CPU: 0 PID: 1759 at drivers/net/wireless/iwl7000/iwlwifi/pcie/trans.c:2082 iwl_trans_pcie_reclaim+0x1ee4/0x2b9a [iwlwifi]() [ 13.087096] Timeout waiting for hardware access (CSR_GP_CNTRL 0xffffffff) Signed-off-by: NRajat Jain <rajatja@google.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Christoph Böhmwalder 提交于
Fixes three trivial issues as reported by checkpatch.pl, namely two switch/case indentation issues and one alignment issue in a multiline comment. Signed-off-by: NChristoph Böhmwalder <christoph@boehmwalder.at> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Mordechay Goodstein 提交于
This helps for documentation and clarifies the code by defining the exact response struct for the marker command. Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
These enum values don't exist, so remove their documentation as well. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Emmanuel Grumbach 提交于
When we have an AP which supports HT and a single HT station is connected, we change the min_width from NL80211_CHAN_WIDTH_20_NOHT to NL80211_CHAN_WIDTH_20. This of course has no implication on the channel width but still sends a command to the firmware. Remember the last width that was sent and refrain from sending unnecessary commands to the firmware. Sending a PHY_CTXT_CMD to the firmware has a cost since it recalculates the presence on the medium and because of that it closes the transmit queues for a short while. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Chaya Rachel Ivgi 提交于
The driver reads xtal_calib from NVM file, but actually never uses it. This is only used in dvm driver. Signed-off-by: NChaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Shahar S Matityahu 提交于
Devices in the A000 family can use a different size for the command queue. To allow this, make the command queue size configurable and set the size for A000 devices to 32. Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Ilan Peer 提交于
This would enable to better catch timing issues with cases that WRT dump takes too much time. Signed-off-by: NIlan Peer <ilan.peer@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Emmanuel Grumbach 提交于
The trigger that collects data when a frame is released because of the timer of the reordering buffer was not implemented for 9000 devices. Fix this. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Emmanuel Grumbach 提交于
This was never used by any product. Remove it. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 David Spinadel 提交于
New quota command adds a field indicating low latency direction per quota. A TLV API bit was added to indicate the new API. Signed-off-by: NDavid Spinadel <david.spinadel@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Oren Givon 提交于
Add a new a000 device with PCI ID (0x2720, 0x0030). Signed-off-by: NOren Givon <oren.givon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Oren Givon 提交于
The PCI ID (0x2720, 0x0070) was set with the config struct iwla000_2ax_cfg_hr instead of iwla000_2ac_cfg_hr_cdb. Fixes: 175b87c6 ("iwlwifi: add the new a000_2ax series") Signed-off-by: NOren Givon <oren.givon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Luca Coelho 提交于
De-inline iwl_trans_ref/unref and move it to common transport code in preparation for more common code to come to these functions. Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Liad Kaufman 提交于
Add a dbgfs entry for an easy way during runtime to check what FW file was loaded, and get some general FW-related data. Signed-off-by: NLiad Kaufman <liad.kaufman@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 02 10月, 2017 2 次提交
-
-
由 Kevin Cernekee 提交于
brcmf_fweh_process_event() sets event->datalen to the endian-swapped value of event_packet->msg.datalen, which is the same as emsg.datalen. This length is already validated in brcmf_fweh_process_event(), so there is no need to check it again upon dequeuing the event. Suggested-by: NArend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: NKevin Cernekee <cernekee@chromium.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Kevin Cernekee 提交于
In brcmf_p2p_notify_rx_mgmt_p2p_probereq(), chanspec is assigned before the length of rxframe is validated. This could lead to uninitialized data being accessed (but not printed). Since we already have a perfectly good endian-swapped copy of rxframe->chanspec in ch.chspec, and ch.chspec is not modified by decchspec(), avoid the extra assignment and use ch.chspec in the debug print. Suggested-by: NMattias Nissler <mnissler@chromium.org> Signed-off-by: NKevin Cernekee <cernekee@chromium.org> Reviewed-by: NArend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 25 9月, 2017 17 次提交
-
-
由 Colin Ian King 提交于
Don't populate const arrays on the stack, instead make them static. Makes the object code smaller by over 60 bytes: Before: text data bss dec hex filename 14816 1296 0 16112 3ef0 b43/phy_ht.o After: text data bss dec hex filename 14551 1496 0 16047 3eaf b43/phy_ht.o (gcc 6.3.0, x86-64) Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Colin Ian King 提交于
Don't populate const array ac_to_fifo on the stack in an inlined function, instead make it static. Makes the object code smaller by over 800 bytes: text data bss dec hex filename 159029 33154 1216 193399 2f377 4965-mac.o text data bss dec hex filename 158122 33250 1216 192588 2f04c 4965-mac.o (gcc version 7.2.0 x86_64) Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Igor Mitsyanko 提交于
Wireless device may send "channel changed" event before driver registered this device with wireless core, which will result in warnings. Once device is registered, higher layer will query channel info manually using .get_channel callback. Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Igor Mitsyanko 提交于
There are no users of this field and it can safely be removed. Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Igor Mitsyanko 提交于
It is never used for anything useful, and all logic is handled by either WiFi card or higher layers. Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Igor Mitsyanko 提交于
Do not assume whether wireless device can or can not handle switching several interfaces on a single radio to different channels. Device will handle it itself and will return appropriate error code. Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Igor Mitsyanko 提交于
No reason to verify channel switch request in driver, it can simply be forwarded to wireless device. Device can perform required checks and return appropriate error code, and driver may not even have information on current operational channel. Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Igor Mitsyanko 提交于
This makes no sense because real operational channel is choosen based on AP operation, not on what STA is configured to. Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Igor Mitsyanko 提交于
Do not try to cache current operational channel info in driver, this is a potential source of synchronization issues + driver does not really need that info. Introduce GET_CHANNEL command and process it appropriately. Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Igor Mitsyanko 提交于
Specifically, it has to report center frequency, secondary center frequency (for 80+80) and BW. Introduce channel definition structure to qlink and modify channel change event processing function accordingly. Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Igor Mitsyanko 提交于
This will allow to use qlink channel width values to specify BW setting corresponding to enum nl80211_chan_width. Current user is converted to apply BIT() macro manually to each individual qlink_channel_width enumeration value. Signed-off-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Karun Eagalapati 提交于
SDIO suspend and resume handlers are implemented and verified that device works after suspend/resume cycle. Signed-off-by: NKarun Eagalapati <karun256@gmail.com> Signed-off-by: NAmitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Pavani Muthyala 提交于
We will dump information about firmware version, firmware file name and operating mode during initialization. Signed-off-by: NPavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by: NAmitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Colin Ian King 提交于
Don't populate the read-only const array tos_to_ac on the stack, instead make it static. Makes the object code smaller by 250 bytes: Before: text data bss dec hex filename 26104 2720 128 28952 7118 wmm.o After: text data bss dec hex filename 25758 2816 128 28702 701e wmm.o Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Adam Borowski 提交于
I assume that a blank efuse comes with all ones, thus I did not bother recognizing other possible junk values. This matches 100% of dongles I've seen (a single Gembird 8192eu). Signed-off-by: NAdam Borowski <kilobyte@angband.pl> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Colin Ian King 提交于
Don't populate const array ucode_ofdm_rates on the stack, instead make it static. Makes the object code smaller by 100 bytes: Before: text data bss dec hex filename 39482 564 0 40046 9c6e phy_cmn.o After text data bss dec hex filename 39326 620 0 39946 9c0a phy_cmn.o (gcc 6.3.0, x86-64) Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NArend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Allen Pais 提交于
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: NAllen Pais <allen.lkml@gmail.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 20 9月, 2017 6 次提交
-
-
由 Ganapathi Bhat 提交于
Avoid calculating random MAC address in driver. Instead make use of 'get_random_mask_addr()' function. Signed-off-by: NGanapathi Bhat <gbhat@marvell.com> Reviewed-by: NBrian Norris <briannorris@chromium.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ganapathi Bhat 提交于
Application will keep track of whether MAC address randomization is enabled or not during scan. But at present driver is storing 'random_mac' in mwifiex_private which implies even after scan is done driver has some reference to the earlier 'scan request'. To avoid this, make use of 'mac_addr' variable in 'scan_request' to store 'random_mac'. This structure will be freed by cfg80211 once scan is done. Signed-off-by: NGanapathi Bhat <gbhat@marvell.com> Reviewed-by: NBrian Norris <briannorris@chromium.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Colin Ian King 提交于
Don't populate const arrays on the stack, instead make them static Makes the object code smaller by nearly 300 bytes: Before: text data bss dec hex filename 69260 16149 576 85985 14fe1 cfg80211.o After: text data bss dec hex filename 68385 16725 576 85686 14eb6 cfg80211.o Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Himanshu Jha 提交于
call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Semantic patch used to resolve this issue: @@ expression e,e2; constant c; statement S; @@ e = kzalloc(e2, c); if(e == NULL) S - memset(e, 0, e2); Signed-off-by: NHimanshu Jha <himanshujha199640@gmail.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ganapathi Bhat 提交于
If driver is loaded with 'mfg_mode' enabled, then the sending commands are not allowed. So, skip sending commands, to firmware in mwifiex_add_virtual_intf if 'mfg_mode' is enabled. Fixes: 7311ea85 ("mwifiex: fix AP start problem for newly added interface") Signed-off-by: NGanapathi Bhat <gbhat@marvell.com> Reviewed-by: NBrian Norris <briannorris@chromium.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Ganapathi Bhat 提交于
Driver sends a series of scan commands to firmware to serve a user scan request. If an intermediate scan command fails, driver aborts the scan but it is not being informed to cfg80211. This will cause issues in applications performing periodic scans. Fix this by informing scan abort. Signed-off-by: NCathy Luo <cluo@marvell.com> Signed-off-by: NGanapathi Bhat <gbhat@marvell.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-