1. 15 5月, 2015 1 次提交
    • J
      tipc: simplify include dependencies · a6bf70f7
      Jon Paul Maloy 提交于
      When we try to add new inline functions in the code, we sometimes
      run into circular include dependencies.
      
      The main problem is that the file core.h, which really should be at
      the root of the dependency chain, instead is a leaf. I.e., core.h
      includes a number of header files that themselves should be allowed
      to include core.h. In reality this is unnecessary, because core.h does
      not need to know the full signature of any of the structs it refers to,
      only their type declaration.
      
      In this commit, we remove all dependencies from core.h towards any
      other tipc header file.
      
      As a consequence of this change, we can now move the function
      tipc_own_addr(net) from addr.c to addr.h, and make it inline.
      
      There are no functional changes in this commit.
      Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a6bf70f7
  2. 10 2月, 2015 2 次提交
  3. 13 1月, 2015 11 次提交
  4. 09 1月, 2015 1 次提交
    • Y
      tipc: convert tipc reference table to use generic rhashtable · 07f6c4bc
      Ying Xue 提交于
      As tipc reference table is statically allocated, its memory size
      requested on stack initialization stage is quite big even if the
      maximum port number is just restricted to 8191 currently, however,
      the number already becomes insufficient in practice. But if the
      maximum ports is allowed to its theory value - 2^32, its consumed
      memory size will reach a ridiculously unacceptable value. Apart from
      this, heavy tipc users spend a considerable amount of time in
      tipc_sk_get() due to the read-lock on ref_table_lock.
      
      If tipc reference table is converted with generic rhashtable, above
      mentioned both disadvantages would be resolved respectively: making
      use of the new resizable hash table can avoid locking on the lookup;
      smaller memory size is required at initial stage, for example, 256
      hash bucket slots are requested at the beginning phase instead of
      allocating the entire 8191 slots in old mode. The hash table will
      grow if entries exceeds 75% of table size up to a total table size
      of 1M, and it will automatically shrink if usage falls below 30%,
      but the minimum table size is allowed down to 256.
      
      Also converts ref_table_lock to a separate mutex to protect hash table
      mutations on write side. Lastly defers the release of the socket
      reference using call_rcu() to allow using an RCU read-side protected
      call to rhashtable_lookup().
      Signed-off-by: NYing Xue <ying.xue@windriver.com>
      Acked-by: NJon Maloy <jon.maloy@ericsson.com>
      Acked-by: NErik Hugne <erik.hugne@ericsson.com>
      Cc: Thomas Graf <tgraf@suug.ch>
      Acked-by: NThomas Graf <tgraf@suug.ch>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      07f6c4bc
  5. 27 11月, 2014 1 次提交
  6. 22 11月, 2014 1 次提交
    • R
      tipc: add bearer disable/enable to new netlink api · 0655f6a8
      Richard Alpe 提交于
      A new netlink API for tipc that can disable or enable a tipc bearer.
      
      The new API is separated from the old API because of a bug in the
      user space client (tipc-config). The problem is that older versions
      of tipc-config has a very low receive limit and adding commands to
      the legacy genl_opts struct causes the ctrl_getfamily() response
      message to grow, subsequently breaking the tool.
      
      The new API utilizes netlink policies for input validation. Where the
      top-level netlink attributes are tipc-logical entities, like bearer.
      The top level entities then contain nested attributes. In this case
      a name, nested link properties and a domain.
      
      Netlink commands implemented in this patch:
      TIPC_NL_BEARER_ENABLE
      TIPC_NL_BEARER_DISABLE
      
      Netlink logical layout of bearer enable message:
      -> bearer
          -> name
          [ -> domain ]
          [
          -> properties
              -> priority
          ]
      
      Netlink logical layout of bearer disable message:
      -> bearer
          -> name
      Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com>
      Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
      Acked-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0655f6a8
  7. 02 9月, 2014 1 次提交
    • E
      tipc: add name distributor resiliency queue · a5325ae5
      Erik Hugne 提交于
      TIPC name table updates are distributed asynchronously in a cluster,
      entailing a risk of certain race conditions. E.g., if two nodes
      simultaneously issue conflicting (overlapping) publications, this may
      not be detected until both publications have reached a third node, in
      which case one of the publications will be silently dropped on that
      node. Hence, we end up with an inconsistent name table.
      
      In most cases this conflict is just a temporary race, e.g., one
      node is issuing a publication under the assumption that a previous,
      conflicting, publication has already been withdrawn by the other node.
      However, because of the (rtt related) distributed update delay, this
      may not yet hold true on all nodes. The symptom of this failure is a
      syslog message: "tipc: Cannot publish {%u,%u,%u}, overlap error".
      
      In this commit we add a resiliency queue at the receiving end of
      the name table distributor. When insertion of an arriving publication
      fails, we retain it in this queue for a short amount of time, assuming
      that another update will arrive very soon and clear the conflict. If so
      happens, we insert the publication, otherwise we drop it.
      
      The (configurable) retention value defaults to 2000 ms. Knowing from
      experience that the situation described above is extremely rare, there
      is no risk that the queue will accumulate any large number of items.
      Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Acked-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a5325ae5
  8. 24 8月, 2014 1 次提交
    • J
      tipc: use pseudo message to wake up sockets after link congestion · 50100a5e
      Jon Paul Maloy 提交于
      The current link implementation keeps a linked list of blocked ports/
      sockets that is populated when there is link congestion. The purpose
      of this is to let the link know which users to wake up when the
      congestion abates.
      
      This adds unnecessary complexity to the data structure and the code,
      since it forces us to involve the link each time we want to delete
      a socket. It also forces us to grab the spinlock port_lock within
      the scope of node_lock. We want to get rid of this direct dependence,
      as well as the deadlock hazard resulting from the usage of port_lock.
      
      In this commit, we instead let the link keep list of a "wakeup" pseudo
      messages for use in such situations. Those messages are sent to the
      pending sockets via the ordinary message reception path, and wake up
      the socket's owner when they are received.
      
      This enables us to get rid of the 'waiting_ports' linked lists in struct
      tipc_port that manifest this direct reference. As a consequence, we can
      eliminate another BH entry into the socket, and hence the need to grab
      port_lock. This is a further step in our effort to remove port_lock
      altogether.
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      50100a5e
  9. 15 5月, 2014 2 次提交
    • J
      tipc: improve and extend media address conversion functions · 38504c28
      Jon Paul Maloy 提交于
      TIPC currently handles two media specific addresses: Ethernet MAC
      addresses and InfiniBand addresses. Those are kept in three different
      formats:
      
      1) A "raw" format as obtained from the device. This format is known
         only by the media specific adapter code in eth_media.c and
         ib_media.c.
      2) A "generic" internal format, in the form of struct tipc_media_addr,
         which can be referenced and passed around by the generic media-
         unaware code.
      3) A serialized version of the latter, to be conveyed in neighbor
         discovery messages.
      
      Conversion between the three formats can only be done by the media
      specific code, so we have function pointers for this purpose in
      struct tipc_media. Here, the media adapters can install their own
      conversion functions at startup.
      
      We now introduce a new such function, 'raw2addr()', whose purpose
      is to convert from format 1 to format 2 above. We also try to as far
      as possible uniform commenting, variable names and usage of these
      functions, with the purpose of making them more comprehensible.
      
      We can now also remove the function tipc_l2_media_addr_set(), whose
      job is done better by the new function.
      
      Finally, we expand the field for serialized addresses (format 3)
      in discovery messages from 20 to 32 bytes. This is permitted
      according to the spec, and reduces the risk of problems when we
      add new media in the future.
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      38504c28
    • J
      tipc: rename and move message reassembly function · 37e22164
      Jon Paul Maloy 提交于
      The function tipc_link_frag_rcv() is in reality a re-entrant generic
      message reassemby function that has nothing in particular to do with
      the link, where it is defined now. This becomes obvious when we see
      the need to call the function from other places in the code.
      
      In this commit rename it to tipc_buf_append() and move it to the file
      msg.c. We also simplify its signature by moving the tail pointer to
      the control block of the head buffer, hence making the head buffer
      self-contained.
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Reviewed-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      37e22164
  10. 06 5月, 2014 1 次提交
  11. 23 4月, 2014 1 次提交
  12. 28 3月, 2014 1 次提交
  13. 22 2月, 2014 1 次提交
    • Y
      tipc: make bearer set up in module insertion stage · 970122fd
      Ying Xue 提交于
      Accidentally a side effect is involved by commit 6e967adf(tipc:
      relocate common functions from media to bearer). Now tipc stack
      handler of receiving packets from netdevices as well as netdevice
      notification handler are registered when bearer is enabled rather
      than tipc module initialization stage, but the two handlers are
      both unregistered in tipc module exit phase. If tipc module is
      inserted and then immediately removed, the following warning
      message will appear:
      
      "dev_remove_pack: ffffffffa0380940 not found"
      
      This is because in module insertion stage tipc stack packet handler
      is not registered at all, but in module exit phase dev_remove_pack()
      needs to remove it. Of course, dev_remove_pack() cannot find tipc
      protocol handler from the kernel protocol handler list so that the
      warning message is printed out.
      
      But if registering the two handlers is adjusted from enabling bearer
      phase into inserting module stage, the warning message will be
      eliminated. Due to this change, tipc_core_start_net() and
      tipc_core_stop_net() can be deleted as well.
      Reported-by: NWang Weidong <wangweidong1@huawei.com>
      Cc: Jon Maloy <jon.maloy@ericsson.com>
      Cc: Erik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: NYing Xue <ying.xue@windriver.com>
      Reviewed-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      970122fd
  14. 14 2月, 2014 1 次提交
  15. 17 12月, 2013 1 次提交
  16. 20 10月, 2013 1 次提交
  17. 18 6月, 2013 2 次提交
    • Y
      tipc: introduce new TIPC server infrastructure · c5fa7b3c
      Ying Xue 提交于
      TIPC has two internal servers, one providing a subscription
      service for topology events, and another providing the
      configuration interface. These servers have previously been running
      in BH context, accessing the TIPC-port (aka native) API directly.
      Apart from these servers, even the TIPC socket implementation is
      partially built on this API.
      
      As this API may simultaneously be called via different paths and in
      different contexts, a complex and costly lock policiy is required
      in order to protect TIPC internal resources.
      
      To eliminate the need for this complex lock policiy, we introduce
      a new, generic service API that uses kernel sockets for message
      passing instead of the native API. Once the toplogy and configuration
      servers are converted to use this new service, all code pertaining
      to the native API can be removed. This entails a significant
      reduction in code amount and complexity, and opens up for a complete
      rework of the locking policy in TIPC.
      
      The new service also solves another problem:
      
      As the current topology server works in BH context, it cannot easily
      be blocked when sending of events fails due to congestion. In such
      cases events may have to be silently dropped, something that is
      unacceptable. Therefore, the new service keeps a dedicated outbound
      queue receiving messages from BH context. Once messages are
      inserted into this queue, we will immediately schedule a work from a
      special workqueue. This way, messages/events from the topology server
      are in reality sent in process context, and the server can block
      if necessary.
      
      Analogously, there is a new workqueue for receiving messages. Once a
      notification about an arriving message is received in BH context, we
      schedule a work from the receive workqueue to do the job of
      receiving the message in process context.
      
      As both sending and receive messages are now finished in processes,
      subscribed events cannot be dropped any more.
      
      As of this commit, this new server infrastructure is built, but
      not actually yet called by the existing TIPC code, but since the
      conversion changes required in order to use it are significant,
      the addition is kept here as a separate commit.
      Signed-off-by: NYing Xue <ying.xue@windriver.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c5fa7b3c
    • Y
      tipc: change socket buffer overflow control to respect sk_rcvbuf · cc79dd1b
      Ying Xue 提交于
      As per feedback from the netdev community, we change the buffer
      overflow protection algorithm in receiving sockets so that it
      always respects the nominal upper limit set in sk_rcvbuf.
      
      Instead of scaling up from a small sk_rcvbuf value, which leads to
      violation of the configured sk_rcvbuf limit, we now calculate the
      weighted per-message limit by scaling down from a much bigger value,
      still in the same field, according to the importance priority of the
      received message.
      
      To allow for administrative tunability of the socket receive buffer
      size, we create a tipc_rmem sysctl variable to allow the user to
      configure an even bigger value via sysctl command.  It is a size of
      three (min/default/max) to be consistent with things like tcp_rmem.
      
      By default, the value initialized in tipc_rmem[1] is equal to the
      receive socket size needed by a TIPC_CRITICAL_IMPORTANCE message.
      This value is also set as the default value of sk_rcvbuf.
      Originally-by: NJon Maloy <jon.maloy@ericsson.com>
      Cc: Neil Horman <nhorman@tuxdriver.com>
      Cc: Jon Maloy <jon.maloy@ericsson.com>
      [Ying: added sysctl variation to Jon's original patch]
      Signed-off-by: NYing Xue <ying.xue@windriver.com>
      [PG: don't compile sysctl.c if not config'd; add Documentation]
      Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cc79dd1b
  18. 20 8月, 2012 4 次提交
  19. 14 7月, 2012 4 次提交
    • E
      tipc: remove print_buf and deprecated log buffer code · 869dd466
      Erik Hugne 提交于
      The internal log buffer handling functions can now safely be
      removed since there is no code using it anymore.  Requests to
      interact with the internal tipc log buffer over netlink (in
      config.c) will report 'obsolete command'.
      
      This represents the final removal of any references to a
      struct print_buf, and the removal of the struct itself.
      We also get rid of a TIPC specific Kconfig in the process.
      
      Finally, log.h is removed since it is not needed anymore.
      Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      869dd466
    • E
      tipc: phase out most of the struct print_buf usage · dc1aed37
      Erik Hugne 提交于
      The tipc_printf is renamed to tipc_snprintf, as the new name
      describes more what the function actually does.  It is also
      changed to take a buffer and length parameter and return
      number of characters written to the buffer.  All callers of
      this function that used to pass a print_buf are updated.
      
      Final removal of the struct print_buf itself will be done
      synchronously with the pending removal of the deprecated
      logging code that also was using it.
      
      Functions that build up a response message with a list of
      ports, nametable contents etc. are changed to return the number
      of characters written to the output buffer. This information
      was previously hidden in a field of the print_buf struct, and
      the number of chars written was fetched with a call to
      tipc_printbuf_validate.  This function is removed since it
      is no longer referenced nor needed.
      
      A generic max size ULTRA_STRING_MAX_LEN is defined, named
      in keeping with the existing TIPC_TLV_ULTRA_STRING, and the
      various definitions in port, link and nametable code that
      largely duplicated this information are removed.  This means
      that amount of link statistics that can be returned is now
      increased from 2k to 32k.
      
      The buffer overflow check is now done just before the reply
      message is passed over netlink or TIPC to a remote node and
      the message indicating a truncated buffer is changed to a less
      dramatic one (less CAPS), placed at the end of the message.
      Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      dc1aed37
    • E
      tipc: remove TIPC packet debugging functions and macros · 568fc588
      Erik Hugne 提交于
      The link queue traces and packet level debug functions served
      a purpose during early development, but are now redundant
      since there are other, more capable tools available for
      debugging at the packet level.
      
      The TIPC_DEBUG Kconfig option is removed since it does not
      provide any extra debugging features anymore.
      
      This gets rid of a lot of tipc_printf usages, which will
      make the pending cleanup work of that function easier.
      Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      568fc588
    • E
      tipc: use standard printk shortcut macros (pr_err etc.) · 2cf8aa19
      Erik Hugne 提交于
      All messages should go directly to the kernel log.  The TIPC
      specific error, warning, info and debug trace macro's are
      removed and all references replaced with pr_err, pr_warn,
      pr_info and pr_debug.
      
      Commonly used sub-strings are explicitly declared as a const
      char to reduce .text size.
      
      Note that this means the debug messages (changed to pr_debug),
      are now enabled through dynamic debugging, instead of a TIPC
      specific Kconfig option (TIPC_DEBUG).  The latter will be
      phased out completely
      Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
      [PG: use pr_fmt as suggested by Joe Perches <joe@perches.com>]
      Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      2cf8aa19
  20. 01 5月, 2012 1 次提交
    • P
      tipc: compress out gratuitous extra carriage returns · 617d3c7a
      Paul Gortmaker 提交于
      Some of the comment blocks are floating in limbo between two
      functions, or between blocks of code.  Delete the extra line
      feeds between any comment and its associated following block
      of code, to be consistent with the majority of the rest of
      the kernel.  Also delete trailing newlines at EOF and fix
      a couple trivial typos in existing comments.
      
      This is a 100% cosmetic change with no runtime impact.  We get
      rid of over 500 lines of non-code, and being blank line deletes,
      they won't even show up as noise in git blame.
      Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      617d3c7a
  21. 25 2月, 2012 1 次提交
    • A
      tipc: Eliminate support for tipc_mode global variable · b58343f9
      Allan Stephens 提交于
      Removes all references to the global variable that records whether
      TIPC is running in "single node" mode or "network" mode, since this
      information can be easily deduced from the global variable that
      records TIPC's network address. (i.e. a non-zero network address
      means that TIPC is running in network mode.)
      
      The changes made update most existing mode-based checks to use the
      network address global variable. A few checks that are no longer
      needed are removed entirely, along with any associated code lying on
      non-executable control paths.
      Signed-off-by: NAllan Stephens <allan.stephens@windriver.com>
      Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
      b58343f9