- 11 8月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
Move the Cisco driver into drivers/net/ethernet/cisco/ and make the necessary Kconfig and Makefile changes. CC: Christian Benvenuti <benve@cisco.com> CC: Vasanthy Kolluri <vkolluri@cisco.com> CC: Roopa Prabhu <roprabhu@cisco.com> CC: David Wang <dwang2@cisco.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 01 7月, 2011 1 次提交
-
-
由 Vasanthy Kolluri 提交于
enic driver and the underlying hardware use different units for representing the interrupt coalesce timer. Driver converts the interrupt coalesce timer in usec to hardware cycles while setting the relevant hardware registers. The conversion factor can be different for each of the adapter hardware types. So it is dynamically learnt from the adapter firmware using the devcmd CMD_INTR_COAL_CONVERT. This allows the driver to configure the hardware interrupt coalesce timers in a platform independent way. Signed-off-by: NDanny Guo <dannguo@cisco.com> Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid Wang <dwang2@cisco.com> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
- 31 3月, 2011 1 次提交
-
-
由 Roopa Prabhu 提交于
This patch introduces new fw devcmds for port profile handling. These new commands are similar to the current fw commands for port profile handling. The only difference being that the new commands split the existing port profile handling devcmds into multiple fw commands, giving the driver finer control over port profile operations. Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid Wang <dwang2@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2011 1 次提交
-
-
由 Vasanthy Kolluri 提交于
This patch provides support to the newer version of firmware devcmd CMD_MCPU_FW_INFO that returns additional information (ASIC type and revision) about the underlying hardware. This knowledge is required by the driver to implement any hardware specific features. Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid Wang <dwang2@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 8月, 2010 1 次提交
-
-
由 Roopa Prabhu 提交于
Add new firmware devcmds: CMD_PROXY_BY_INDEX, CMD_CONFIG_INFO_GET Signed-off-by: NScott Feldman <scofeldm@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2010 4 次提交
-
-
由 Vasanthy Kolluri 提交于
1) Update copyright 2) Fix hardware queue descriptor field size CQ_ENET_RQ_DESC_FCOE_SOF_BITS 3) Include rtnetlink.h instead of if_link.h 4) Selectively flush writes to interrupt mask register 5) Use pci_enable_device_mem 6) Remove unused variables and header files 7) Fix size mismatch between memory alloc and free operations of a variable 8) Check for non null arguments to vic_provinfo_alloc Signed-off-by: NScott Feldman <scofeldm@cisco.com> Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasanthy Kolluri 提交于
Add new firmware devcmds - CMD_PROXY_BY_BDF, CMD_PACKET_FILTER_ALL, CMD_ENABLE_WAIT. Signed-off-by: NScott Feldman <scofeldm@cisco.com> Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasanthy Kolluri 提交于
The port profile information for a dynamic enic device is set by the upper layers, that are oblivious to the device reset operation. We do not want a reset operation erase the network state of a dynamic enic device as there is no way to set up the port profile information again. Hence a lighter reset operation called hang reset is used. Hang reset, unlike soft reset does not reset the network state and resets the host side state only. Signed-off-by: NScott Feldman <scofeldm@cisco.com> Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasanthy Kolluri 提交于
The current ingress vlan rewrite mode setting lets the hardware strip off the tag control information of a packet received on native vlan. As a result, the priority bits are also lost. The fix is to change the ingress vlan rewrite mode setting such that the complete tag control information is retained for packets that belong to native vlan. Signed-off-by: NScott Feldman <scofeldm@cisco.com> Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 9月, 2009 1 次提交
-
-
由 Scott Feldman 提交于
Deprecate some old APIa; change arguments to stats dump all API; add new interrupt assert API Signed-off-by: NScott Feldman <scofeldm@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 2月, 2009 1 次提交
-
-
由 Scott Feldman 提交于
Signed-off-by: NScott Feldman <scofeldm@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 11月, 2008 1 次提交
-
-
由 Scott Feldman 提交于
Add driver/firmware compatibility check. Update firmware notify cmd to honor notify area size. Add new version of init cmd. Add link_down_cnt to notify area to track link down count. Signed-off-by: NScott Feldman <scofeldm@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 9月, 2008 1 次提交
-
-
由 Scott Feldman 提交于
Signed-off-by: NScott Feldman <scofeldm@cisco.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-