vgaarb.h was missing the #define of the #ifndef at the top for the guard
to prevent multiple #include's from causing re-define errors
Signed-off-by: NDoug Goldstein <cardoe@gentoo.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

this fixes a regression since the fbcon rework.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On nv50 it became impossible to attempt a PCI ROM shadow of the VBIOS,
which will break some setups.

This patch also removes the different ordering of shadow methods for
pre-nv50 chipsets.  The reason for the different ordering was paranoia,
but it should hopefully be OK to try shadowing PRAMIN first.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This fixes a regression caused by b2ea4aa6
due to the way shared ddc with multiple digital connectors was handled.

You generally have two cases where DDC lines are shared:
- HDMI + VGA
- HDMI + DVI-D

HDMI + VGA is easy to deal with because you can check the EDID for the
to see if the attached monitor is digital.  A shared DDC line with two
digital connectors is more complex.  You can't use the hdmi bits in the
EDID since they may not be there with DVI<->HDMI adapters.  In this case
all we can do is check the HPD pins to see which is connected as we have
no way of knowing using the EDID.

Reported-by: trapdoor6@gmail.com
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

A lot of 945GMs have had stability issues for a long time, this manifested as X hangs, blitter engine hangs, and lots of crashes.

one such report is at:
https://bugs.freedesktop.org/show_bug.cgi?id=20560

along with numerous distro bugzillas.

This only took a week of digging and hair ripping to figure out.

Tracked down and tested on a 945GM Lenovo T60,
previously running
x11perf -copypixwin500
or
x11perf -copywinpix500
repeatedly would cause the GPU to wedge within 4 or 5 tries, with random busy bits set.

After this patch no hangs were observed.

cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

The i915 memory arbiter has a register full of configuration
bits which are currently not defined in the driver header file.
Signed-off-by: NKeith Packard <keithp@keithp.com>
cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

copy_to_user() returns the number of bytes remaining to be copied, but
we want to return a negative error code.  This gets copied to user
space.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If the kzalloc() fails we should return NULL.  All the places that call
alloc_apertures() check for this already.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NJames Simmons <jsimmons@infradead.org>
Acked-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If kzalloc() fails exit with -ENOMEM.
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Make inclusion of <asm/agp.h> conditional on TTM_HAS_AGP.  The use
of the functions declared in it is already conditional.
Reported-by: NGeert Stappers <stappers@stappers.nl>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Tested-by: NGeert Stappers <stappers@stappers.nl>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The asics in question have the following requirements with regard to
their gart setups:

1. The GART aperture size has to be in the form of 2^X bytes, where X is from 25 to 31
2. The GART aperture MC base has to be aligned to a boundary equal to the size of the
aperture.
3. The GART page table has to be aligned to the boundary equal to the size of the table.
4. The GART page table size is: table_entry_size * (aperture_size / page_size)
5. The GART page table has to be allocated in non-paged, non-cached, contiguous system
memory.

This patch takes care 2.  The rest should already be handled properly.

This fixes a regression noticed by: Torsten Kaiser <just.for.lkml@googlemail.com>
Tested-by: NTorsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Check ulBootUpMemoryClock on AMD IGPs.

Fix regression noticed by Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

fixes fdo bug 26915
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'arm/defconfig/reduced-v2.6.35-rc1' of git://git.pengutronix.de/git/ukl/linux-2.6:
  ARM: reduce defconfigs

This is a big change, but results in no loss of information, despite us
losing almost 200k lines:

 177 files changed, 652 insertions(+), 194157 deletions(-)

and Grant Likely thinks powerpc can also use the same reduction
technique.

The python script that did the reduction looks like this:

    #! /usr/bin/env python
    # vim: set fileencoding=utf-8 :
    # Copyright (C) 2010 by Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

    import re
    import subprocess
    import os
    import sys

    # This prevents including a timestamp in the .config which makes comparing a
    # bit easier.
    os.environ['KCONFIG_NOTIMESTAMP'] = 'Yes, please'

    # XXX: get these using getopt
    kernel_tree = '' # os.path.join(os.environ['HOME'], 'gsrc', 'linux-2.6')
    arch = 'arm'
    target = sys.argv[1]
    defconfig_src = os.path.join(kernel_tree, 'arch/%s/configs/%s' % (arch, target))

    subprocess.check_call(['make', '-s', 'ARCH=%s' % arch, target])
    origconfig = list(open('.config'))
    config = list(origconfig)
    config_size = os.stat('.config').st_size

    i = 0

    while i < len(config):
        print 'test for %r' % config[i]
        defconfig = open(defconfig_src, 'w')
        defconfig.writelines(config[:i])
        defconfig.writelines(config[i + 1:])
        defconfig.close()
        subprocess.check_call(['make', '-s', 'ARCH=%s' % arch, target])
        if os.stat('.config').st_size == config_size and list(open('.config')) == origconfig:
            del config[i]
        else:
            i += 1

    defconfig = open(defconfig_src, 'w')
    defconfig.writelines(config)
    defconfig.close()

which is pretty self-explanatory.
Acked-by: NNicolas Pitre <nico@fluxnic.net>
Acked-by: NRussell King <linux@arm.linux.org.uk>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Restore cleared pin controls on resume

* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host drivers
  V4L/DVB: v4l: mem2mem_testdev: fix g_fmt NULL pointer dereference
  V4L/DVB: uvcvideo: Power line frequency control doesn't support GET_MIN/MAX/RES
  V4L/DVB: ivtv: Add delay to ensure the decoder always restarts with a blank screen
  V4L/DVB: Documentation: Add the Philips FQ1236 MK5 to video4linux/CARDLIST.tuner
  V4L/DVB: tveeprom: Add an entry for tuner code 168: a TCL M30WTP-4N-E tuner
  V4L/DVB: tuner: Add a definition for the Philips FQ1236 MK5 NTSC tuner
  V4L/DVB: OMAP_VOUT: fix: Module params were not working through bootargs
  V4L/DVB: OMAP_VOUT: fix: Replaced dma-sg with dma-contig
  V4L/DVB: OMAP_VOUT:Build FIX: Rebased against latest DSS2 changes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Send Report ID when numbered reports are sent over the control endpoint.
  HID: Enable HID_QUIRK_MULTI_INPUT for Retro Adaptor
  HID: add support for CH Eclipse yoke
  HID: eliminate a double lock in debug code
  HID: ntrig: add support for new firwmare versions
  HID: check for HID_QUIRK_IGNORE during probing
  HID: roccat: fix modules interdependencies

File patterns are one per line.
Fixed include file location.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Report ID wasn't sent as part of the payload for reports which were sent
over the control endpoint. This is required by section 8.1 of the HID spec.
Signed-off-by: NAlan Ott <alan@signal11.us>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The UVC gadget driver borrowed code from the UVC host driver without
changing the symbol names. This results in a namespace clash with
multiple definitions of several symbols when compiling both drivers in
the kernel.

Make all generic UVC functions and variables static in the UVC gadget
driver, as the symbols are not referenced outside of the gadget driver.
Rename the uvc_trace_param global variable to uvc_gadget_trace_param.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: Fix autoloading of fschmd on recent Fujitsu machines
  hwmon: (coretemp) Properly label the sensors
  hwmon: (coretemp) Skip duplicate CPU entries
  hwmon: (it87) Fix in7 on IT8720F
  hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c/mips: Fix error return codes from Sibyte i2c bus driver
  i2c: Fix probability check

Patch for linux-2.6.35-rc4 mainline kernel to enable Paul Qureshi's
Retro Adapter [http://keio.dk/retroadapter.html], an open source USB
device which allows controllers and joysticks from classic computers
and consoles to work on modern PCs, to appear as two separate devices
under Linux.
Signed-off-by: NPeter Edwards <samwise@bagshot-row.org>
Acked-by: NPaul Qureshi <retro@world3.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This USB flight yoke needs the NOGET quirk, like most of CH's other
products. This patch adds that.
Signed-off-by: NJonathan Rockway <jon@jrock.us>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Sibyte i2c bus driver returns non-descriptive error values.
Update to return error values as defined in Documentation/i2c/fault-codes.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The new unified probing function differs from the original code, and
the preliminary test whether probing is possible must be updated
accordingly.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Fujitsu slightly changed the DMI strings in their recent machines,
(for example the D2778) and this breaks the automatic loading of the
needed fschmd driver. Being more tolerant on string comparison fixes
the issue.

This closes bug #15634:
https://bugzilla.kernel.org/show_bug.cgi?id=15634Signed-off-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NSergey Spiridonov <sena@hurd.homeunix.org>
Cc: Hans de Goede <hdegoede@redhat.com>

Don't assume that CPU entry number and core ID always match. It
worked in the simple cases (single CPU, no HT) but fails on
multi-CPU systems.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NHuaxu Wan <huaxu.wan@intel.com>
Cc: stable@kernel.org

On hyper-threaded CPUs, each core appears twice in the CPU list. Skip
the second entry to avoid duplicate sensors.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NHuaxu Wan <huaxu.wan@intel.com>
Cc: stable@kernel.org

The IT8720F has no VIN7 pin, so VCCH should always be routed
internally to VIN7 with an internal divider. Curiously, there still
is a configuration bit to control this, which means it can be set
incorrectly. And even more curiously, many boards out there are
improperly configured, even though the IT8720F datasheet claims that
the internal routing of VCCH to VIN7 is the default setting. So we
force the internal routing in this case.

It turns out that all boards with the wrong setting are from Gigabyte,
so I suspect a BIOS bug. But it's easy enough to workaround in the
driver, so let's do it.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Jean-Marc Spaggiari <jean-marc@spaggiari.org>
Cc: stable@kernel.org

Reported temperature for ASB1 CPUs is too high.
Add ASB1 CPU revisions (these are also non-desktop variants) to the
list of CPUs for which the temperature fixup is not required.

Example: (from LENOVO ThinkPad Edge 13, 01972NG, system was idle)

  Current kernel reports

  $ sensors
  k8temp-pci-00c3
  Adapter: PCI adapter
  Core0 Temp:  +74.0 C
  Core0 Temp:  +70.0 C
  Core1 Temp:  +69.0 C
  Core1 Temp:  +70.0 C

  With this patch I have

  $ sensors
  k8temp-pci-00c3
  Adapter: PCI adapter
  Core0 Temp:  +54.0 C
  Core0 Temp:  +51.0 C
  Core1 Temp:  +48.0 C
  Core1 Temp:  +49.0 C

Cc: stable@kernel.org [.32.x .33.x, .34.x]
Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Many codecs now clear the pin controls at suspend via snd_hda_shutup_pins()
for reducing the click noise at power-off.  But this leaves some pins
uninitialized, and they'll be never recovered after resume.

This patch adds the proper recovery of cleared pin controls on resume.
Also it adds a check of bus->shutdown so that pins won't be cleared at
module unloading.

Reference: Kernel bug 16339
	http://bugzilla.kernel.org/show_bug.cgi?id=16339

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Extract the microcode for the QLogic QLE7220 series IB HCA and use the
kernel microcode request facility to load the microcode.  This
supports Debian Linux's requirements to separate microcode which
doesn't have open source code available from the device driver.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Calling g_fmt before s_fmt resulted in a NULL pointer dereference as no
default formats were being selected on probe.
Reported-by: NNémeth Márton <nm127@freemail.hu>
Signed-off-by: NPawel Osciak <p.osciak@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Issuing a GET_MIN request on the power line frequency control times out
on at least the Apple iSight. As the UVC specification doesn't list
GET_MIN/MAX/RES as supported on that control, remove them from the
uvc_ctrls array.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add a short delay when stopping the decoder, allowing it to settle and
preventing some unexpected interaction with other firmware commands.
Signed-off-by: NIan Armstrong <ian@iarmst.demon.co.uk>
Tested-by: NMartin Dauskardt <martin.dauskardt@gmx.de>
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Hauppauge EEPROM tuner code 168 has recently shown up on HVR-1600 TV
capture cards supported by the cx18 driver.  This change allows analog
tuner type autodetection to succeed for these cards.

Information for decoding tuner code 168 was provided by Hauppauge.
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>