All of the rcutorture scripts has the usual GPL header, which contains
a long-obsolete postal address for FSF.  To avoid the need to track the
FSF office's movements, this commit substitutes the URL where GPL may
be found.
Reported-by: NGreg KH <gregkh@linuxfoundation.org>
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The output of the rcutorture scripts often requires interpretation, so
this commit simplifies this interpretation by tagging messages as
BUGs (colored red) or WARNINGs (colored yellow).
Reported-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Repeatedly running a given test, for example, by repeating the name
as in "--configs "TREE08 TREE08 TREE08" records the results only of
the last run of this test.  This is because the earlier results are
overwritten by the later results.

This commit therefore checks for earlier results, using numbered
file extensions to distinguish multiple runs.  The earlier example
would therefore create directories TREE01, TREE01.2, and TREE01.3.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The commit causes kvm.sh to invoke kvm-recheck.sh at the end of each
run, and causes kvm-recheck.sh to print only the name of the test, not
the full path to the corresponding Kconfig file.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The TREE08 Kconfig fragment does not enable tracing, which is appropriate
for its test case.  However, this can be inconvenient in cases where
TREE08 locates RCU bugs.  This commit therefore adds a TREE08-T that
differs from TREE08 only in enabling CONFIG_RCU_TRACE.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

This commit adds the --kmake-arg to kvm.sh, which allows passing in
things like "V=1" to see the build commands, as well as enabling the
CROSS_COMPILE= make macro used for cross-building.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

This commit adds the --no-initrd argument to kvm.sh, which permits
initrd to be contained in a root partition specified by the --bootargs
argument.  Without --no-initrd, the kernel build expects an initrd
directory in the same rcutorture directory that contains bin and configs.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

This commits adds the --qemu-args argument to kvm.sh that is required
to pass boot devices down through to qemu.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

This commit allows easy specification of trace_event lists, among other
things.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

This commit adds --buildonly, which does the builds specified by the
--configs argument, but does not boot or test the resulting kernels.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Don't grab the configuration fragment from the configs directory because
it might well have been changed since the test was run.  Instead, use
the ConfigFragment file that was placed in the results directory.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

As it stands, the default kernel boot parameters generated from
the Kconfig fragment will override any supplied with the .boot
file that can optionally accompany a Kconfig fragment.  Rearrange
ordering to permit the specific .boot arguments to override those
generated by analyzing the Kconfig fragment.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

This commit expands the checks for what architecture is running to generate
additional qemu-system- commands, then uses the resulting qemu-system-
command name to choose different qemu arguments as needed for different
architectures.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The --rcu-kvm argument was intended to allow the scripts to live in
an alternate location.  Unfortunately, this prevents the kvm.sh script
from using common functions until after it finished parsing arguments,
because it doesn't know where to find them until then.  However, "cp -a"
and "ln -s" work pretty well, so lack of an --rcu-kvm argument can be
easily worked around.

This commit therefore removes this argument.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The qemu -name argument doesn't seem to be useful in this environment,
so this commit removes it.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The task of working out which flavor of qemu to use gets more complex
as more types of CPUs are supported.  Adding Power makes three in addition
to 32-bit and 64-bit x86, so it is time to pull this out into a function.
This commit therefore creates an identify_qemu function and also adds
a --qemu-cmd command-line argument for the inevitable case where the
identify_qemu cannot figure it out.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The commit uses configcheck.sh from within configinit.sh, replacing the
imperfect inline expansion that was there before.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

This commit drops no-longer-needed diagnostics from the output.  Some of
them are retained in logfiles, in case they are ever needed.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The TINY_RCU test cases were first put in place many years ago, and have
been incrementally modified rather than being reworked.  This commit
therefore completes a long-overdue reworking of the TINY_RCU test cases.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The TREE_RCU test cases were first put in place many years ago, and have
been incrementally modified rather than being reworked.  This commit
therefore completes a long-overdue reworking of the TREE_RCU test cases.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Use .boot facility to ease inclusion of SRCU into automated testing.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

The v3.12 version of the kernel added the CONFIG_NO_HZ_FULL_SYSIDLE
Kconfig parameter, so this commit adds a version transition at that
point.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Some Kconfig fragments require rcutorture module parameters to
do optimal testing, for example, a configuration for SRCU would
need rcutorture.torture_type=srcu.  This commit therefore adds a
per-Kconfig-fragment boot-parameter capability.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Different Kconfig parameters apply to different kernel versions, as
do different rcutorture module parameters.  This commit allows the
rcutorture test scripts to adjust for different kernel versions.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

Allow datestamp to be specified to allow tests to be broken up and run
in parallel.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>

This commit adds the test framework that I used to test RCU under KVM.
This consists of a group of scripts and Kconfig fragments.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>