Define Inline TLS state, connection management info.
Supporting macros definition.
Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com>
Reviewed-by: NMichael Werner <werner@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Define macro for programming the TLS Key context
Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Read the Inline TLS capability from firmware.
Determine the area reserved for storing the keys
Dump the Inline TLS tx and rx records count.
Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com>
Reviewed-by: NMichael Werner <werner@chelsio.com>
Reviewed-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Key area size in hw-config file. CPL struct for TLS request
and response. Work request for Inline TLS.
Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com>
Reviewed-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ethtool option enables TLS record offload on HW, user
configures the feature for netdev capable of Inline TLS.
This allows user to define custom sk_prot for Inline TLS sock
Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Facility to register Inline TLS drivers to net/tls. Setup
TLS_HW_RECORD prot to listen on offload device.

Cases handled
- Inline TLS device exists, setup prot for TLS_HW_RECORD
- Atleast one Inline TLS exists, sets TLS_HW_RECORD.
- If non-inline device establish connection, move to TLS_SW_TX
Signed-off-by: NAtul Gupta <atul.gupta@chelsio.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-03-31

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add raw BPF tracepoint API in order to have a BPF program type that
   can access kernel internal arguments of the tracepoints in their
   raw form similar to kprobes based BPF programs. This infrastructure
   also adds a new BPF_RAW_TRACEPOINT_OPEN command to BPF syscall which
   returns an anon-inode backed fd for the tracepoint object that allows
   for automatic detach of the BPF program resp. unregistering of the
   tracepoint probe on fd release, from Alexei.

2) Add new BPF cgroup hooks at bind() and connect() entry in order to
   allow BPF programs to reject, inspect or modify user space passed
   struct sockaddr, and as well a hook at post bind time once the port
   has been allocated. They are used in FB's container management engine
   for implementing policy, replacing fragile LD_PRELOAD wrapper
   intercepting bind() and connect() calls that only works in limited
   scenarios like glibc based apps but not for other runtimes in
   containerized applications, from Andrey.

3) BPF_F_INGRESS flag support has been added to sockmap programs for
   their redirect helper call bringing it in line with cls_bpf based
   programs. Support is added for both variants of sockmap programs,
   meaning for tx ULP hooks as well as recv skb hooks, from John.

4) Various improvements on BPF side for the nfp driver, besides others
   this work adds BPF map update and delete helper call support from
   the datapath, JITing of 32 and 64 bit XADD instructions as well as
   offload support of bpf_get_prandom_u32() call. Initial implementation
   of nfp packet cache has been tackled that optimizes memory access
   (see merge commit for further details), from Jakub and Jiong.

5) Removal of struct bpf_verifier_env argument from the print_bpf_insn()
   API has been done in order to prepare to use print_bpf_insn() soon
   out of perf tool directly. This makes the print_bpf_insn() API more
   generic and pushes the env into private data. bpftool is adjusted
   as well with the print_bpf_insn() argument removal, from Jiri.

6) Couple of cleanups and prep work for the upcoming BTF (BPF Type
   Format). The latter will reuse the current BPF verifier log as
   well, thus bpf_verifier_log() is further generalized, from Martin.

7) For bpf_getsockopt() and bpf_setsockopt() helpers, IPv4 IP_TOS read
   and write support has been added in similar fashion to existing
   IPv6 IPV6_TCLASS socket option we already have, from Nikita.

8) Fixes in recent sockmap scatterlist API usage, which did not use
   sg_init_table() for initialization thus triggering a BUG_ON() in
   scatterlist API when CONFIG_DEBUG_SG was enabled. This adds and
   uses a small helper sg_init_marker() to properly handle the affected
   cases, from Prashant.

9) Let the BPF core follow IDR code convention and therefore use the
   idr_preload() and idr_preload_end() helpers, which would also help
   idr_alloc_cyclic() under GFP_ATOMIC to better succeed under memory
   pressure, from Shaohua.

10) Last but not least, a spelling fix in an error message for the
    BPF cookie UID helper under BPF sample code, from Colin.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
inet: frags: bring rhashtables to IP defrag

IP defrag processing is one of the remaining problematic layer in linux.

It uses static hash tables of 1024 buckets, and up to 128 items per bucket.

A work queue is supposed to garbage collect items when host is under memory
pressure, and doing a hash rebuild, changing seed used in hash computations.

This work queue blocks softirqs for up to 25 ms when doing a hash rebuild,
occurring every 5 seconds if host is under fire.

Then there is the problem of sharing this hash table for all netns.

It is time to switch to rhashtables, and allocate one of them per netns
to speedup netns dismantle, since this is a critical metric these days.

Lookup is now using RCU, and 64bit hosts can now provision whatever amount
of memory needed to handle the expected workloads.

v2: Addressed Herbert and Kirill feedbacks
  (Use rhashtable_free_and_destroy(), and split the big patch into small units)

v3: Removed the extra add_frag_mem_limit(...) from inet_frag_create()
    Removed the refcount_inc_not_zero() call from inet_frags_free_cb(),
    as we can exploit del_timer() return value.

v4: kbuild robot feedback about one missing static (squashed)
    Additional patches :
      inet: frags: do not clone skb in ip_expire()
      ipv6: frags: rewrite ip6_expire_frag_queue()
      rhashtable: reorganize struct rhashtable layout
      inet: frags: reorganize struct netns_frags
      inet: frags: get rid of ipfrag_skb_cb/FRAG_CB
      ipv6: frags: get rid of ip6frag_skb_cb/FRAG6_CB
      inet: frags: get rid of nf_ct_frag6_skb_cb/NFCT_FRAG6_CB
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

nf_ct_frag6_queue() uses skb->cb[] to store the fragment offset,
meaning that we could use two cache lines per skb when finding
the insertion point, if for some reason inet6_skb_parm size
is increased in the future.

By using skb->ip_defrag_offset instead of skb->cb[] we pack all the fields
in a single cache line, matching what we did for IPv4.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip6_frag_queue uses skb->cb[] to store the fragment offset, meaning that
we could use two cache lines per skb when finding the insertion point,
if for some reason inet6_skb_parm size is increased in the future.

By using skb->ip_defrag_offset instead of skb->cb[], we pack all
the fields in a single cache line, matching what we did for IPv4.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_defrag uses skb->cb[] to store the fragment offset, and unfortunately
this integer is currently in a different cache line than skb->next,
meaning that we use two cache lines per skb when finding the insertion point.

By aliasing skb->ip_defrag_offset and skb->dev, we pack all the fields
in a single cache line and save precious memory bandwidth.

Note that after the fast path added by Changli Gao in commit
d6bebca9 ("fragment: add fast path for in-order fragments")
this change wont help the fast path, since we still need
to access prev->len (2nd cache line), but will show great
benefits when slow path is entered, since we perform
a linear scan of a potentially long list.

Also, note that this potential long list is an attack vector,
we might consider also using an rb-tree there eventually.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Put the read-mostly fields in a separate cache line
at the beginning of struct netns_frags, to reduce
false sharing noticed in inet_frag_kill()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While under frags DDOS I noticed unfortunate false sharing between
@nelems and @params.automatic_shrinking

Move @nelems at the end of struct rhashtable so that first cache line
is shared between all cpus, because almost never dirtied.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make it similar to IPv4 ip_expire(), and release the lock
before calling icmp functions.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An skb_clone() was added in commit ec4fbd64 ("inet: frag: release
spinlock before calling icmp_send()")

While fixing the bug at that time, it also added a very high cost
for DDOS frags, as the ICMP rate limit is applied after this
expensive operation (skb_clone() + consume_skb(), implying memory
allocations, copy, and freeing)

We can use skb_get(head) here, all we want is to make sure skb wont
be freed by another cpu.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some users are willing to provision huge amounts of memory to be able
to perform reassembly reasonnably well under pressure.

Current memory tracking is using one atomic_t and integers.

Switch to atomic_long_t so that 64bit arches can use more than 2GB,
without any cost for 32bit arches.

Note that this patch avoids an overflow error, if high_thresh was set
to ~2GB, since this test in inet_frag_alloc() was never true :

if (... || frag_mem_limit(nf) > nf->high_thresh)

Tested:

$ echo 16000000000 >/proc/sys/net/ipv4/ipfrag_high_thresh

<frag DDOS>

$ grep FRAG /proc/net/sockstat
FRAG: inuse 14705885 memory 16000002880

$ nstat -n ; sleep 1 ; nstat | grep Reas
IpReasmReqds                    3317150            0.0
IpReasmFails                    3317112            0.0
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function is obsolete, after rhashtable addition to inet defrag.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This refactors ip_expire() since one indentation level is removed.

Note: in the future, we should try hard to avoid the skb_clone()
since this is a serious performance cost.
Under DDOS, the ICMP message wont be sent because of rate limits.

Fact that ip6_expire_frag_queue() does not use skb_clone() is
disturbing too. Presumably IPv6 should have the same
issue than the one we fixed in commit ec4fbd64
("inet: frag: release spinlock before calling icmp_send()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove sum_frag_mem_limit(), ip_frag_mem() & ip6_frag_mem()

Also since we use rhashtable we can bring back the number of fragments
in "grep FRAG /proc/net/sockstat /proc/net/sockstat6" that was
removed in commit 434d3054 ("inet: frag: don't account number
of fragment queues")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some applications still rely on IP fragmentation, and to be fair linux
reassembly unit is not working under any serious load.

It uses static hash tables of 1024 buckets, and up to 128 items per bucket (!!!)

A work queue is supposed to garbage collect items when host is under memory
pressure, and doing a hash rebuild, changing seed used in hash computations.

This work queue blocks softirqs for up to 25 ms when doing a hash rebuild,
occurring every 5 seconds if host is under fire.

Then there is the problem of sharing this hash table for all netns.

It is time to switch to rhashtables, and allocate one of them per netns
to speedup netns dismantle, since this is a critical metric these days.

Lookup is now using RCU. A followup patch will even remove
the refcount hold/release left from prior implementation and save
a couple of atomic operations.

Before this patch, 16 cpus (16 RX queue NIC) could not handle more
than 1 Mpps frags DDOS.

After the patch, I reach 9 Mpps without any tuning, and can use up to 2GB
of storage for the fragments (exact number depends on frags being evicted
after timeout)

$ grep FRAG /proc/net/sockstat
FRAG: inuse 1966916 memory 2140004608

A followup patch will change the limits for 64bit arches.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Florian Westphal <fw@strlen.de>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rehashing and destroying large hash table takes a lot of time,
and happens in process context. It is safe to add cond_resched()
in rhashtable_rehash_table() and rhashtable_free_and_destroy()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to call inet_frags_init() before register_pernet_subsys(),
as a prereq for following patch ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We want to call lowpan_net_frag_init() earlier.
Similar to commit "inet: frags: refactor ipv6_frag_init()"

This is a prereq to "inet: frags: use rhashtables for reassembly units"
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We want to call inet_frags_init() earlier.

This is a prereq to "inet: frags: use rhashtables for reassembly units"
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to simplify the API, add a pointer to struct inet_frags.
This will allow us to make things less complex.

These functions no longer have a struct inet_frags parameter :

inet_frag_destroy(struct inet_frag_queue *q  /*, struct inet_frags *f */)
inet_frag_put(struct inet_frag_queue *q /*, struct inet_frags *f */)
inet_frag_kill(struct inet_frag_queue *q /*, struct inet_frags *f */)
inet_frags_exit_net(struct netns_frags *nf /*, struct inet_frags *f */)
ip6_expire_frag_queue(struct net *net, struct frag_queue *fq)
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We will soon initialize one rhashtable per struct netns_frags
in inet_frags_init_net().

This patch changes the return value to eventually propagate an
error.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

csum field in struct frag_queue is not used, remove it.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Update for net-next.

Misc. updates including updated firmware interface, some additional
port statistics, a new IRQ assignment scheme for the RDMA driver, support
for VF trust, and other changes and improvements for SRIOV.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the driver needs to re-initailize the IRQ vectors, we make the
new ulp_irq_stop() call to tell the RDMA driver to disable and free
the IRQ vectors.  After IRQ vectors have been re-initailized, we
make the ulp_irq_restart() call to tell the RDMA driver that
IRQs can be restarted.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add additional logic to reserve completion rings for the bnxt_re driver
when it requests MSIX vectors.  The function bnxt_cp_rings_in_use()
will return the total number of completion rings used by both drivers
that need to be reserved.  If the network interface in up, we will
close and open the NIC to reserve the new set of completion rings and
re-initialize the vectors.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Refactor bnxt_need_reserve_rings() slightly so that __bnxt_reserve_rings()
can call it and remove some duplicated code.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add remapping logic so that bnxt_en can use any arbitrary MSIX vectors.
This will allow the driver to reserve one range of MSIX vectors to be
used by both bnxt_en and bnxt_re.  bnxt_en can now skip over the MSIX
vectors used by bnxt_re.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the current code, the range of MSIX vectors allocated for the RDMA
driver is disjoint from the network driver.  This creates a problem
for the new firmware ring reservation scheme.  The new scheme requires
the reserved completion rings/MSIX vectors to be in a contiguous
range.

Change the logic to allocate RDMA MSIX vectors to be contiguous with
the vectors used by bnxt_en on new firmware using the new scheme.
The new function bnxt_get_num_msix() calculates the exact number of
vectors needed by both drivers.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the driver code makes some assumptions about the group index
and the map index of rings.  This makes the code more difficult to
understand and less flexible.

Improve it by adding the grp_idx and map_idx fields explicitly to the
bnxt_ring_struct as a union.  The grp_idx is initialized for each tx ring
and rx agg ring during init. time.  We do the same for the map_idx for
each cmpl ring.

The grp_idx ties the tx ring to the ring group.  The map_idx is the
doorbell index of the ring.  With this new infrastructure, we can change
the ring index mapping scheme easily in the future.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When firmware sends a DMA response to the driver, the last byte of the
message will be set to 1 to indicate that the whole response is valid.
The driver waits for the message to be valid before reading the message.

The firmware spec allows these response messages to increase in
length by adding new fields to the end of these messages.  The
older spec's valid location may become a new field in a newer
spec.  To guarantee compatibility, the driver should zero the valid
byte before interpreting the entire message so that any new fields not
implemented by the older spec will be read as zero.

For messages that are forwarded to VFs, we need to set the length
and re-instate the valid bit so the VF will see the valid response.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When VFs are created, the current code subtracts the maximum VF
resources from the PF's pool.  This under-estimates the resources
remaining in the PF pool.  Instead, we should subtract the minimum
VF resources.  The VF minimum resources are guaranteed to the VFs
and only these should be subtracted from the PF's pool.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When checking for the maximum pre-set TX channels for ethtool -l, we
need to check the current max_tx_scheduler_inputs parameter from firmware.
This parameter specifies the max input for the internal QoS nodes currently
available to this function.  The function's TX rings will be capped by this
parameter.  By adding this logic, we provide a more accurate pre-set max
TX channels to the user.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Gather periodic extended port statistics, if the device is PF and
link is up.
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Include additional hardware port statistics in ethtool -S, which
are useful for debugging.
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trusted VFs are allowed to modify MAC address, even when PF
has assigned one.
Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>