- 28 5月, 2013 10 次提交
-
-
由 Li Zefan 提交于
In old kernels, it's allowed to set softlockup_thresh to -1 or 0 to disable softlockup detection. However watchdog_thresh only uses 0 to disable detection, and setting it to -1 just froze my box and nothing I can do but reboot. Signed-off-by: NLi Zefan <lizefan@huawei.com> Acked-by: NDon Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/51959668.9040106@huawei.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Josh reported that his QEMU is a bad hardware emulator and trips a WARN in the AMD PMU init code. He requested the WARN be turned into a pr_err() or similar. While there, rework the code a little. Reported-by: NJosh Boyer <jwboyer@redhat.com> Acked-by: NRobert Richter <rric@kernel.org> Acked-by: NJacob Shin <jacob.shin@amd.com> Cc: Stephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130521110537.GG26912@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Stephane Eranian 提交于
This patch moves commit 7cc23cd6 to the generic code: perf/x86/intel/lbr: Demand proper privileges for PERF_SAMPLE_BRANCH_KERNEL The check is now implemented in generic code instead of x86 specific code. That way we do not have to repeat the test in each arch supporting branch sampling. Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/20130521105337.GA2879@quadSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dan Carpenter 提交于
We're trying to use 64 bit masks but the shifts wrap so we can't use the high 32 bits. I've fixed this by changing several types to unsigned long long. This is a static checker fix. The one change which is clearly needed is "mask = 0xff << (idx * 8);" where the author obviously intended to use all 64 bits. The other changes are mostly to silence my static checker. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20130518183452.GA14587@elgon.mountainSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Stephane Eranian 提交于
This patch adds /sys/device/xxx/perf_event_mux_interval_ms to ajust the multiplexing interval per PMU. The unit is milliseconds. Value has to be >= 1. In the 4th version, we renamed the sysfs file to be more consistent with the other /proc/sys/kernel entries for perf_events. In the 5th version, we handle the reprogramming of the hrtimer using hrtimer_forward_now(). That way, we sync up to new timer value quickly (suggested by Jiri Olsa). Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/1364991694-5876-3-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Stephane Eranian 提交于
The current scheme of using the timer tick was fine for per-thread events. However, it was causing bias issues in system-wide mode (including for uncore PMUs). Event groups would not get their fair share of runtime on the PMU. With tickless kernels, if a core is idle there is no timer tick, and thus no event rotation (multiplexing). However, there are events (especially uncore events) which do count even though cores are asleep. This patch changes the timer source for multiplexing. It introduces a per-PMU per-cpu hrtimer. The advantage is that even when a core goes idle, it will come back to service the hrtimer, thus multiplexing on system-wide events works much better. The per-PMU implementation (suggested by PeterZ) enables adjusting the multiplexing interval per PMU. The preferred interval is stashed into the struct pmu. If not set, it will be forced to the default interval value. In order to minimize the impact of the hrtimer, it is turned on and off on demand. When the PMU on a CPU is overcommited, the hrtimer is activated. It is stopped when the PMU is not overcommitted. In order for this to work properly, we had to change the order of initialization in start_kernel() such that hrtimer_init() is run before perf_event_init(). The default interval in milliseconds is set to a timer tick just like with the old code. We will provide a sysctl to tune this in another patch. Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/1364991694-5876-2-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
The hw breakpoint pmu 'add' function is missing the period_left update needed for SW events. The perf HW breakpoint events use the SW events framework to process the overflow, so it needs to be properly initialized in the PMU 'add' method. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Reviewed-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Stephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1367421944-19082-5-git-send-email-jolsa@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
Merging EFLAGS bit clearing into a single statement, to ensure EFLAGS bits are being cleared in a single instruction. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Tested-by: NOleg Nesterov <oleg@redhat.com> Reviewed-by: NFrederic Weisbecker <fweisbec@gmail.com> Originally-Reported-by: NVince Weaver <vincent.weaver@maine.edu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1367421944-19082-4-git-send-email-jolsa@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
Clearing RF EFLAGS bit for signal handler. The reason is that this flag is set by debug exception code to prevent the recursive exception entry. Leaving it set for signal handler might prevent debug exception of the signal handler itself. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Tested-by: NOleg Nesterov <oleg@redhat.com> Reviewed-by: NFrederic Weisbecker <fweisbec@gmail.com> Originally-Reported-by: NVince Weaver <vincent.weaver@maine.edu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1367421944-19082-3-git-send-email-jolsa@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Jiri Olsa 提交于
While porting Vince's perf overflow tests I found perf event breakpoint overflow does not work properly. I found the x86 RF EFLAG bit not being set when returning from debug exception after triggering signal handler. Which is exactly what you get when you set perf breakpoint overflow SIGIO handler. This patch and the next two patches fix the underlying bugs. This patch adds the RF EFLAGS bit to be restored on return from signal from the original register context before the signal was entered. This will prevent the RF flag to disappear when returning from exception due to the signal handler being executed. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Tested-by: NOleg Nesterov <oleg@redhat.com> Reviewed-by: NFrederic Weisbecker <fweisbec@gmail.com> Originally-Reported-by: NVince Weaver <vincent.weaver@maine.edu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Stephane Eranian <eranian@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1367421944-19082-2-git-send-email-jolsa@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 27 5月, 2013 6 次提交
-
-
由 Linus Torvalds 提交于
-
由 Manfred Spraul 提交于
do_smart_update_queue() is called when an operation (semop, semctl(SETVAL), semctl(SETALL), ...) modified the array. It must check which of the sleeping tasks can proceed. do_smart_update_queue() missed a few wakeups: - if a sleeping complex op was completed, then all per-semaphore queues must be scanned - not only those that were modified by *sops - if a sleeping simple op proceeded, then the global queue must be scanned again And: - the test for "|sops == NULL) before scanning the global queue is not required: If the global queue is empty, then it doesn't need to be scanned - regardless of the reason for calling do_smart_update_queue() The patch is not optimized, i.e. even completing a wait-for-zero operation causes a rescan. This is done to keep the patch as simple as possible. Signed-off-by: NManfred Spraul <manfred@colorfullife.com> Acked-by: NDavidlohr Bueso <davidlohr.bueso@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: - Stable fix to prevent an rpc_task wakeup race - Fix a NFSv4.1 session drain deadlock - Fix a NFSv4/v4.1 mount regression when not running rpc.gssd - Ensure auth_gss pipe detection works in namespaces - Fix SETCLIENTID fallback if rpcsec_gss is not available * tag 'nfs-for-3.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix SETCLIENTID fallback if GSS is not available SUNRPC: Prevent an rpc_task wakeup race NFSv4.1 Fix a pNFS session draining deadlock SUNRPC: Convert auth_gss pipe detection to work in namespaces SUNRPC: Faster detection if gssd is actually running SUNRPC: Fix a bug in gss_create_upcall
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
Pull amd64 edac fix from Borislav Petkov: "A sysfs file permissions correction" * tag 'edac_fixes_for_3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix bogus sysfs file permissions
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: "This time we made the kernel- and interruption stack allocation reentrant which fixed some strange kernel crashes (specifically protection ID traps). Furthemore this patchset fixes the interrupt stack in UP and SMP configurations by using native locking instructions. And finally usage of floating point calculations on parisc were disabled in the MPILIB." * 'parisc-for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix irq stack on UP and SMP parisc/superio: Use module_pci_driver to register driver parisc: make interrupt and interruption stack allocation reentrant parisc: show number of FPE and unaligned access handler calls in /proc/interrupts parisc: add additional parisc git tree to MAINTAINERS file parisc: use PAGE_SHIFT instead of hardcoded value 12 in pacache.S parisc: add rp5470 entry to machine database MPILIB: disable usage of floating point registers on parisc
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
Pull xfs fixes from Ben Myers: "Here are fixes for corruption on 512 byte filesystems, a rounding error, a use-after-free, some flags to fix lockdep reports, and several fixes related to CRCs. We have a somewhat larger post -rc1 queue than usual due to fixes related to the CRC feature we merged for 3.10: - Fix for corruption with FSX on 512 byte blocksize filesystems - Fix rounding error in xfs_free_file_space - Fix use-after-free with extent free intents - Add several missing KM_NOFS flags to fix lockdep reports - Several fixes for CRC related code" * tag 'for-linus-v3.10-rc3' of git://oss.sgi.com/xfs/xfs: xfs: remote attribute lookups require the value length xfs: xfs_attr_shortform_allfit() does not handle attr3 format. xfs: xfs_da3_node_read_verify() doesn't handle XFS_ATTR3_LEAF_MAGIC xfs: fix missing KM_NOFS tags to keep lockdep happy xfs: Don't reference the EFI after it is freed xfs: fix rounding in xfs_free_file_space xfs: fix sub-page blocksize data integrity writes
-
- 26 5月, 2013 6 次提交
-
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
Pull bettery fixes from Anton Vorontsov: "Last minute one-liners: wrong kfree usage fix, module alias fixup and kconfig adjustments" * tag 'for-v3.10-fixes' of git://git.infradead.org/battery-2.6: pm2301_charger: Fix module alias prefix wm831x_backup: Fix wrong kfree call for devdata->backup.name bq27x00: Fix I2C dependency in KConfig lp8788-charger: Fix kconfig dependency
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael Wysocki: - Additional CPU ID for the intel_pstate driver from Dirk Brandewie. - More cpufreq fixes related to ARM big.LITTLE support and locking from Viresh Kumar. - VIA C7 cpufreq build fix from Rafał Bilski. - ACPI power management fix making it possible to use device power states regardless of the CONFIG_PM setting from Rafael J Wysocki. - New ACPI video blacklist item from Bastian Triller. * tag 'pm+acpi-3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / video: Add "Asus UL30A" to ACPI video detect blacklist cpufreq: arm_big_little_dt: Instantiate as platform_driver cpufreq: arm_big_little_dt: Register driver only if DT has valid data cpufreq / e_powersaver: Fix linker error when ACPI processor is a module cpufreq / intel_pstate: Add additional supported CPU ID cpufreq: Drop rwsem lock around CPUFREQ_GOV_POLICY_EXIT ACPI / PM: Allow device power states to be used for CONFIG_PM unset
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dma fixes from Vinod Koul: "We have two patches from Andy & Rafael fixing the Lynxpoint dma" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: ACPI / LPSS: register clock device for Lynxpoint DMA properly dma: acpi-dma: parse CSRT to extract additional resources
-
由 Kyle McMartin 提交于
kcore_vmalloc is in fs/proc/kcore.c and kcore_mem is unused across the tree. Noticed while grepping the tree for some other kcore stuff. (score looks pretty unmaintained to me.) Signed-off-by: NKyle McMartin <kyle@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC fixes from Vineet Gupta: - Fallouts/wreckage of Cache Flush optimizations / aliasing dcache support - Fix for an interesting bug where piped input to grep was getting mysteriously clobbered * tag 'arc-v3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: lazy dcache flush broke gdb in non-aliasing configs ARC: Use enough bits for determining page's cache color ARC: Brown paper bag bug in macro for checking cache color ARC: copy_(to|from)_user() to honor usermode-access permissions ARC: [mm] Prevent stray dcache lines after__sync_icache_dcach() ARC: [TB10x] Remove redundant abilis,simple-pinctrl mechanism
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Just three this time, all really quite small" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7729/1: vfp: ensure VFP_arch is non-zero when VFP is not supported ARM: 7727/1: remove the .vm_mm value from gate_vma ARM: 7723/1: crypto: sha1-armv4-large.S: fix SP handling
-
- 25 5月, 2013 18 次提交
-
-
由 Vineet Gupta 提交于
gdbserver inserting a breakpoint ends up calling copy_user_page() for a code page. The generic version of which (non-aliasing config) didn't set the PG_arch_1 bit hence update_mmu_cache() didn't sync dcache/icache for corresponding dynamic loader code page - causing garbade to be executed. So now aliasing versions of copy_user_highpage()/clear_page() are made default. There is no significant overhead since all of special alias handling code is compiled out for non-aliasing build Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "A bunch of fixes and one simple fbdev driver which missed the merge window because people will still talking about it (to no great effect)." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (30 commits) aio: fix kioctx not being freed after cancellation at exit time mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas drivers/rtc/rtc-max8998.c: check for pdata presence before dereferencing ocfs2: goto out_unlock if ocfs2_get_clusters_nocache() failed in ocfs2_fiemap() random: fix accounting race condition with lockless irq entropy_count update drivers/char/random.c: fix priming of last_data mm/memory_hotplug.c: fix printk format warnings nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary drivers/block/brd.c: fix brd_lookup_page() race fbdev: FB_GOLDFISH should depend on HAS_DMA drivers/rtc/rtc-pl031.c: pass correct pointer to free_irq() auditfilter.c: fix kernel-doc warnings aio: fix io_getevents documentation revert "selftest: add simple test for soft-dirty bit" drivers/leds/leds-ot200.c: fix error caused by shifted mask mm/THP: use pmd_populate() to update the pmd with pgtable_t pointer linux/kernel.h: fix kernel-doc warning mm compaction: fix of improper cache flush in migration code rapidio/tsi721: fix bug in MSI interrupt handling hfs: avoid crash in hfs_bnode_create ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "We didn't have any fixes sent up for -rc2, so this is a slightly larger batch. A bit all over the place platform-wise; OMAP, at91, marvell, renesas, sunxi, ux500, etc. I tried to summarize highlights but there isn't a whole lot to point out. Lots of little things fixed all over. A couple of defconfig updates due to new/changing options." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: at91/sama5: fix incorrect PMC pcr div definition ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition ARM: at91: at91sam9n12: move external irq declatation to DT ARM: shmobile: marzen: Use error values in usb_power_* ARM: tegra: defconfig fixes ARM: nomadik: fix IRQ assignment for SMC ethernet ARM: vt8500: Add missing NULL terminator in dt_compat clk: tegra: add ac97 controller clock clk: tegra: remove USB from clk init table ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node ARM: plat-orion: Fix num_resources and id for ge10 and ge11 ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis SERIAL: OMAP: Remove the slave idle handling from the driver ARM: OMAP2+: serial: Remove the un-used slave idle hooks ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc() arm: mvebu: fix the 'ranges' property to handle PCIe ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock ...
-
由 Benjamin LaHaise 提交于
The recent changes overhauling fs/aio.c introduced a bug that results in the kioctx not being freed when outstanding kiocbs are cancelled at exit_aio() time. Specifically, a kiocb that is cancelled has its completion events discarded by batch_complete_aio(), which then fails to wake up the process stuck in free_ioctx(). Fix this by modifying the wait_event() condition in free_ioctx() appropriately. This patch was tested with the cancel operation in the thread based code posted yesterday. [akpm@linux-foundation.org: fix build] Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org> Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Zach Brown <zab@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cliff Wickman 提交于
A panic can be caused by simply cat'ing /proc/<pid>/smaps while an application has a VM_PFNMAP range. It happened in-house when a benchmarker was trying to decipher the memory layout of his program. /proc/<pid>/smaps and similar walks through a user page table should not be looking at VM_PFNMAP areas. Certain tests in walk_page_range() (specifically split_huge_page_pmd()) assume that all the mapped PFN's are backed with page structures. And this is not usually true for VM_PFNMAP areas. This can result in panics on kernel page faults when attempting to address those page structures. There are a half dozen callers of walk_page_range() that walk through a task's entire page table (as N. Horiguchi pointed out). So rather than change all of them, this patch changes just walk_page_range() to ignore VM_PFNMAP areas. The logic of hugetlb_vma() is moved back into walk_page_range(), as we want to test any vma in the range. VM_PFNMAP areas are used by: - graphics memory manager gpu/drm/drm_gem.c - global reference unit sgi-gru/grufile.c - sgi special memory char/mspec.c - and probably several out-of-tree modules [akpm@linux-foundation.org: remove now-unused hugetlb_vma() stub] Signed-off-by: NCliff Wickman <cpw@sgi.com> Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Sterba <dsterba@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tomasz Figa 提交于
Currently the driver can crash with a NULL pointer dereference if no pdata is provided, despite of successful registration of the MFD part. This patch fixes the problem by adding a NULL check before dereferencing the pdata pointer. Signed-off-by: NTomasz Figa <t.figa@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joseph Qi 提交于
Last time we found there is lock/unlock bug in ocfs2_file_aio_write, and then we did a thorough search for all lock resources in ocfs2_inode_info, including rw, inode and open lockres and found this bug. My kernel version is 3.0.13, and it is also in the lastest version 3.9. In ocfs2_fiemap, once ocfs2_get_clusters_nocache failed, it should goto out_unlock instead of out, because we need release buffer head, up read alloc sem and unlock inode. Signed-off-by: NJoseph Qi <joseph.qi@huawei.com> Reviewed-by: NJie Liu <jeff.liu@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Acked-by: NSunil Mushran <sunil.mushran@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Kosina 提交于
Commit 902c098a ("random: use lockless techniques in the interrupt path") turned IRQ path from being spinlock protected into lockless cmpxchg-retry update. That commit removed r->lock serialization between crediting entropy bits from IRQ context and accounting when extracting entropy on userspace read path, but didn't turn the r->entropy_count reads/updates in account() to use cmpxchg as well. It has been observed, that under certain circumstances this leads to read() on /dev/urandom to return 0 (EOF), as r->entropy_count gets corrupted and becomes negative, which in turn results in propagating 0 all the way from account() to the actual read() call. Convert the accounting code to be the proper lockless counterpart of what has been partially done by 902c098a. Signed-off-by: NJiri Kosina <jkosina@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Greg KH <greg@kroah.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jarod Wilson 提交于
Commit ec8f02da ("random: prime last_data value per fips requirements") added priming of last_data per fips requirements. Unfortuantely, it did so in a way that can lead to multiple threads all incrementing nbytes, but only one actually doing anything with the extra data, which leads to some fun random corruption and panics. The fix is to simply do everything needed to prime last_data in a single shot, so there's no window for multiple cpus to increment nbytes -- in fact, we won't even increment or decrement nbytes anymore, we'll just extract the needed EXTRACT_SIZE one time per pool and then carry on with the normal routine. All these changes have been tested across multiple hosts and architectures where panics were previously encoutered. The code changes are are strictly limited to areas only touched when when booted in fips mode. This change should also go into 3.8-stable, to make the myriads of fips users on 3.8.x happy. Signed-off-by: NJarod Wilson <jarod@redhat.com> Tested-by: NJan Stancek <jstancek@redhat.com> Tested-by: NJan Stodola <jstodola@redhat.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matt Mackall <mpm@selenic.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix printk format warnings in mm/memory_hotplug.c by using "%pa": mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'resource_size_t' [-Wformat] mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'resource_size_t' [-Wformat] Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ryusuke Konishi 提交于
nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary DESCRIPTION: There are use-cases when NILFS2 file system (formatted with block size lesser than 4 KB) can be remounted in RO mode because of encountering of "broken bmap" issue. The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>: "The machine I've been trialling nilfs on is running Debian Testing, Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've also reproduced it (identically) with Debian Unstable amd64 and Debian Experimental (using the 3.8-trunk kernel). The problematic partitions were formatted with "mkfs.nilfs2 -b 1024 -B 8192"." SYMPTOMS: (1) System log contains error messages likewise: [63102.496756] nilfs_direct_assign: invalid pointer: 0 [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28) [63102.496798] [63102.524403] Remounting filesystem read-only (2) The NILFS2 file system is remounted in RO mode. REPRODUSING PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>): ----------------[BEGIN SCRIPT]-------------------- VG=unencrypted lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- REPRODUCIBILITY: 100% INVESTIGATION: As it was discovered, the issue takes place during segment construction after executing such sequence of user-space operations: open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7 fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 ftruncate(7, 60) The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)" takes place because of trying to get block number for third block of the file with logical offset #3072 bytes. As it is possible to see from above output, the file has 60 bytes of the whole size. So, it is enough one block (1 KB in size) allocation for the whole file. Trying to operate with several blocks instead of one takes place because of discovering several dirty buffers for this file in nilfs_segctor_scan_file() method. The root cause of this issue is in nilfs_set_page_dirty function which is called just before writing to an mmapped page. When nilfs_page_mkwrite function handles a page at EOF boundary, it fills hole blocks only inside EOF through __block_page_mkwrite(). The __block_page_mkwrite() function calls set_page_dirty() after filling hole blocks, thus nilfs_set_page_dirty function (= a_ops->set_page_dirty) is called. However, the current implementation of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page at EOF boundary. As a result, buffers outside EOF are inconsistently marked dirty and queued for write even though they are not mapped with nilfs_get_block function. FIX: This modifies nilfs_set_page_dirty() not to mark hole blocks dirty. Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals for this issue. Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reported-by: NAnthony Doggett <Anthony2486@interfaces.org.uk> Reported-by: NVyacheslav Dubeyko <slava@dubeyko.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Tested-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Brian Behlendorf 提交于
The index on the page must be set before it is inserted in the radix tree. Otherwise there is a small race which can occur during lookup where the page can be found with the incorrect index. This will trigger the BUG_ON() in brd_lookup_page(). Signed-off-by: NBrian Behlendorf <behlendorf1@llnl.gov> Reported-by: NChris Wedgwood <cw@f00f.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
If NO_DMA=y: drivers/built-in.o: In function `goldfish_fb_remove': drivers/video/goldfishfb.c:301: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `goldfish_fb_probe': drivers/video/goldfishfb.c:247: undefined reference to `dma_alloc_coherent' drivers/video/goldfishfb.c:280: undefined reference to `dma_free_coherent' Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lars-Peter Clausen 提交于
free_irq() expects the same pointer that was passed to request_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: <smpl> @r1@ type T; T devid; @@ request_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) </smpl> Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix kernel-doc warnings in kernel/auditfilter.c: Warning(kernel/auditfilter.c:1029): Excess function parameter 'loginuid' description in 'audit_receive_filter' Warning(kernel/auditfilter.c:1029): Excess function parameter 'sessionid' description in 'audit_receive_filter' Warning(kernel/auditfilter.c:1029): Excess function parameter 'sid' description in 'audit_receive_filter' Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Moyer 提交于
In reviewing man pages, I noticed that io_getevents is documented to update the timeout that gets passed into the library call. This doesn't happen in kernel space or in the library (even though it's documented to do so in both places). Unless there is objection, I'd like to fix the comments/docs to match the code (I will also update the man page upon consensus). Signed-off-by: NJeff Moyer <jmoyer@redhat.com> Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org> Acked-by: NCyril Hrubis <chrubis@suse.cz> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Revert commit 58c7be84 ("selftest: add simple test for soft-dirty bit"). This is the self test for Pavel's pagemap2 patches which didn't actually get merged. Reported-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christian Gmeiner 提交于
During the development of this driver an in-house register documentation was used. The last week some integration tests were done and this problem was found. It turned out that the released register documentation is wrong. The fix is very simple: shift all masks by one. Signed-off-by: NChristian Gmeiner <christian.gmeiner@gmail.com> Cc: Bryan Wu <cooloney@gmail.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-