Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This flag seems used commonly, so deserves to be located there.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Originally hda_bus takes its own ops (hda_bus_ops) to allow different
controller drivers giving individual implementations of PCM
attachment, etc.  But this never happened and we finally merged both
codec and controller helper codes.  Thus there is no merit to keep the
indirect accesses to functions via hda_bus_ops.

This patch replaces these calls with the direct local function calls
for simplification.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

After correcting the fields to point the right members, tracepoints
can be reenabled again for the legacy controller code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move the small portion of the common sequence in hda_intel.c and
hda_tegra.c into hda_controller.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... and replace with the existing hda-core helper codes.
This reduces lots of lines, finally.

Since struct hda_bus is now embedded into struct azx,
snd_hda_bus_new() is moved and expanded from hda_codec.c to
hda_controller.c, accordingly.  Also private_free bus ops and
private_data field are removed because we no longer need to point azx
object from bus (we can use container_of())

The spin locks are consolidated into the single one, bus->reg_lock.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... including dsp loader helpers.  Lots of codes removed.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Embed hdac_stream object into azx_dev, and use a few basic helper
functions.  The most of helper codes for hdac_stream aren't still used
yet.

Also this commit disables the tracepoints temporarily due to build
problems.  It'll be enabled again later.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

One less redirection again.  This also requires the change of the call
order in the toplevel divers.  Namely, the bus has to be created at
first before other initializations since the memory allocation ops are
called through bus object now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

One less redirection.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There is no much merit to keep the HD-audio codec and controller
helper codes in separate modules any longer.  Let's merge them into a
single helper module.

This patch just changes Makefile entries to merge two individual
modules to one.  The only code change is the removal of superfluous
MODULE_*() macros in one side.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... and drop bus->rirb_error flag.  This makes the code simpler.

We treat -EAGAIN from get_response ops as a special meaning: it allows
the caller to retry after bus reset.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A few basic codes for communicating over HD-audio bus are moved to
struct hdac_bus now.  It has only command and get_response ops in
addition to the unsolicited event handling.

Note that the codec-side tracing support is disabled temporarily
during this transition due to the code shuffling.  It will be
re-enabled later once when all pieces are settled down.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The driver shutdown ops is simpler than registering reboot notifier
manually.  There should be no functional change by this -- the codec
driver calls its own callback while the bus driver just calls
azx_stop() like before.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit [63e51fd7: ALSA: hda - Don't take unresponsive D3
transition too serious] introduced a conditional fallback behavior to
the HD-audio controller depending on the flag set.  However, it
introduced a silly bug, too, that the flag was evaluated in a reverse
way.  This resulted in a regression of HD-audio controller driver
where it can't go to the fallback mode at communication errors.

Unfortunately (or fortunately?) this didn't come up until recently
because the affected code path is an error handling that happens only
on an unstable hardware chip.  Most of recent chips work stably, thus
they didn't hit this problem.  Now, we've got a regression report with
a VIA chip, and this seems indeed requiring the fallback to the
polling mode, and finally the bug was revealed.

The fix is a oneliner to remove the wrong logical NOT in the check.
(Lesson learned - be careful about double negation.)

The bug should be backported to stable, but the patch won't be
applicable to 3.13 or earlier because of the code splits.  The stable
fix patches for earlier kernels will be posted later manually.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94021
Fixes: 63e51fd7 ('ALSA: hda - Don't take unresponsive D3 transition too serious')
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now we have all pieces ready, and put them into places:
- add the hda_pcm refcount to azx_pcm_open() and azx_pcm_close(),
- call the most of cleanup code in hda_codec_reset() from the codec
  driver remove,
- call the same code also from the hda_codec object free.

Then the codec driver can be unbound more safely now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The PCM ops might be set NULL, or cleared to NULL when the driver is
unbound.  Give a proper NULL check at each place to be more robust.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The memory allocators should have already given the kernel warning
messages, thus we don't have to annoy again.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Allow the codec object to have an individual card pointer.  Not only
this simplifies the redirections in many places, also this will allow
us to make each codec assigned to a different card object.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We leave the pcm field of struct hda_pcm at removal of each device, so
far.  This hasn't been a problem since unbinding the codec driver
isn't supposed to happen and another route via snd_hda_codec_reset()
clears all the once.  However, for a proper unbind implementation, we
need to care about it.

This patch does the thing above properly:

- Include struct hda_pcm pointer instead of struct hda_pcm_stream
  pointers in struct azx_dev.  This allows us to point the hda_pcm
  object at dev_free callback.

- Introduce to_hda_pcm_stream() macro for better readability.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now the final bit of runtime PM cleanup: instead of manual
notification of the power up/down of the codec via hda_bus pm_notify
ops, use the standard runtime PM feature.

The child codec device will kick off the runtime PM of the parent
(PCI) device upon suspend/resume automatically.  For managing whether
the link can be really turned off, we use the bit flags
bus->codec_powered instead of the earlier bus->power_keep_link_on.
flag.  Each codec driver is responsible to set/clear the bit flag, and
the controller device can be turned off only when all these bits are
cleared.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We used to pass the power_save option value to hda_bus via a given
pointer.  This was needed to refer to the value from the HD-audio core
side.  However, after the transition to the runtime PM, this is no
longer needed.

This patch drops the power_save value indirection in hda_bus above,
and let the controller driver reprograms the autosuspend value
explicitly by a new helper, snd_hda_set_power_save().  Without this
call, the HD-audio core doesn't set up the autosuspend and flip the
runtime PM.  (User may still be able to set up via sysfs, though.)

Along with this change, the pointer argument of azx_bus_create() is
dropped as well.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It is a bad idea to export static functions. GCC for some platforms
shows errors like:

  error: __ksymtab_azx_get_response causes a section type conflict
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Like the previous transition of suspend/resume, now move the
power-save code to the standard runtime PM.  As usual for runtime PM,
it's a bit tricky, but this simplified codes a lot in the end.

For keeping the usage compatibility, power_save module option still
controls the whole power-saving behavior on all codecs.  The value is
translated to pm_runtime_*_autosuspend() and pm_runtime_allow() /
pm_runtime_forbid() calls.

snd_hda_power_up() and snd_hda_power_down() are translated to
pm_runtime_get_sync() and pm_runtime_put_autosuspend(), respectively.
Since we can do call pm_runtime_get_sync() more reliably, the sync
version is used always and snd_hda_power_up_d3wait() is dropped.
Another slight difference is that snd_hda_power_up()/down() don't call
runtime_pm code during the suspend/resume transition phase.  Calling
them there isn't safe unlike our own code, resulted in unexpected
behavior (endless wakeups).

The hda_power_count tracepoint was removed, as it doesn't match well
with the new code.

Last but not least, we need to set ignore_children flag in the parent
dev.power field so that the runtime PM of the controller chip won't
get confused.  The notification is still done in the bus pm_notify
callback.  We'll get rid of this hack in the later patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch moves the suspend/resume mechanisms down to each codec
driver level, as we have a proper codec driver bound on the bus now.
Then we get the asynchronous PM gratis without fiddling much in the
driver level.

As a soft-landing transition, implement the common suspend/resume pm
ops for hda_codec_driver and keep the each codec driver intact.  Only
the callers of suspend/resume in the controller side (azx_suspend()
and azx_resume()) are removed.

Another involved place is azx_bus_reset() calling the temporary
suspend and resume as a hackish method of bus reset.  The HD-audio
core provide a helper function snd_hda_bus_reset() instead.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is a preliminary patch for the hda_bus implementation, removing
the parent device setup to codec device.  Since the bus and the class
devices can't be crossed over, leave the sound devices to the default
parent device as is.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No real functional change, only take wall clock and system time
in same routine and add accuracy report.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

azx_create_codec() function does actually two things: create a bus and
probe codecs.  For the future work, split this to two logical
functions, azx_bus_create() and azx_probe_codecs().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's just an indirection, so let the caller directly calling
snd_hda_build_controls().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There is no big reason to keep them separately.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

For making the debugging of runtime PM easier, introduce
azx_has_pm_runtime() and use it in all places checking the runtime pm
driver capability.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of copying from the given template, let the caller fills the
fields after creation.  This simplifies the code after all.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make sure wallclock counter and trigger timestamp are read very
close to each other for better alignment.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Like previous patches, at this time we embed the struct device into
PCM object.  However, this needs a bit more caution: struct snd_pcm
doesn't own one device but two, for both playback and capture!  Thus
not struct snd_pcm but struct snd_pcm_str object contains the device.

Along with this change, pcm->dev field is dropped for avoiding
confusion.  It was meant to point to a non-standard parent.  But,
since now we can touch each struct device directly, we can manipulate
the parent field easily there, too.
Reviewed-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch fix spelling typo in hda_controller.c.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Implemented separate stream_tag assignment for input and output streams.
According to hda specification stream tag must be unique throughout the
input streams group, however an output stream might use a stream tag
which is already in use by an input stream. This change is necessary
to support HW which provides a total of more than 15 stream DMA engines
which with legacy implementation causes an overflow on SDxCTL.STRM
field (and the whole SDxCTL register) and as a result usage of
Reserved value 0 in the SDxCTL.STRM field which confuses HDA controller.
Signed-off-by: NRafal Redzimski <rafal.f.redzimski@intel.com>
Signed-off-by: NJayachandran B <jayachandran.b@intel.com>
Signed-off-by: NLibin Yang <libin.yang@intel.com>
Reviewed-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

After commit b2b49ccb (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under sound/.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NNicolin Chen <nicoleotsuka@gmail.com>
Acked-by: NBrian Austin <brian.austin@cirrus.com>
Acked-by: NMark Brown <broonie@kernel.org>

We got a regression report for 3.15.x kernels, and this turned out to
be triggered by the fix for stream assignment order.  On reporter's
machine with Intel controller (8086:1e20) + VIA VT1802 codec, the
first playback slot can't work with speaker outputs.

But the original commit was actually a fix for AMD controllers where
no proper GCAP value is returned, we shouldn't revert the whole
commit.  Instead, in this patch, a new flag is introduced to determine
the stream assignment order, and follow the old behavior for Intel
controllers.

Fixes: dcb32ecd ('ALSA: hda - Do not assign streams in reverse order')
Reported-and-tested-by: NSteven Newbury <steve@snewbury.org.uk>
Cc: <stable@vger.kernel.org> [v3.15+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ICH6_ prefix doesn't mean that it's specific to ICH6 chipset but
rather its generic for all HD-audio (or "Azalia") devices.
Use AZX_ prefix instead to align with other constants.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>