This driver provides support for PMC control on Apollo Lake platforms.
The PMC is an ARC processor which defines some IPC commands for
communication with other entities in the CPU.
Signed-off-by: Nqipeng.zha <qipeng.zha@intel.com>
[fengguang.wu@intel.com: Fix Sparse and Cocinelle warnings]
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

This is an ACPI driver for Dell laptops which receive HW slider radio
switch or hotkey toggle wifi button events. It exports rfkill device
dell-rbtn (which provide correct hard rfkill state) or hotkey input device.

Alex Hung is author of original hotkey input device code.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: Alex Hung <alex.hung@canonical.com>
[fengguang.wu@intel.com: rbtn_ops can be static]
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
[dvhart@linux.intel.com: Correct multi-line comment formatting]
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Makefile and Kconfig build support patch for the newly introduced
kernel module toshiba_haps.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

This acpi driver provide supports for freefall sensors SMO8800/SMO8810 which
can be found on Dell Latitude laptops. Driver register /dev/freefall misc
device which has same interface as driver hp_accel freefall driver. So any
existing applications for HP freefall sensor /dev/freefall will work for with
this new driver for Dell Latitude laptops too.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Cc: Sonal Santan <sonal.santan@gmail.com>
Tested-By: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-By: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NMario Limonciello <mario_limonciello@dell.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

This reverts commit 997ab407. This driver is
replaced by the more general SOC IOSF driver in commit 46184415.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Signed-off-by: NAlex Hung <alex.hung@canonical.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Current Intel SOC cores use a MailBox Interface (MBI) to provide access to unit
devices connected to the system fabric. This driver implements access to this
interface on BayTrail platforms. This is a requirement for drivers that need
access to unit registers on the platform (e.g. accessing the PUNIT for power
management features such as RAPL). Serialized access is handled by all exported
routines with spinlocks.

The API includes 3 functions for access to unit registers:

int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)

port:	indicating the unit being accessed
opcode:	the read or write port specific opcode
offset:	the register offset within the port
mdr:	the register data to be read, written, or modified
mask:	bit locations in mdr to change

Returns nonzero on error

Note: GPU code handles access to the GFX unit. Therefore access to that unit
with this driver is disallowed to avoid conflicts.
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

It makes sense to split out the Chromebook/Chromebox hardware platform
drivers to a separate subdirectory, since some of it will be shared
between ARM and x86.

This moves over the existing chromeos_laptop driver without making
any other changes, and adds appropriate Kconfig entries for the new
directory. It also adds a MAINTAINERS entry for the new subdir.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Intel Smart Connect is an Intel-specific ACPI interface for configuring
devices to wake up at regular intervals so they can pull down mail or other
internet updates, and then go to sleep again. If a user enables this in
Windows and then reboots into Linux, the device may wake up if it's put to
sleep. Since there's no Linux userland support for any of this, the machine
will then remain awake until something else puts it back to sleep.

I haven't figured out all that much about how this works (there's a bunch
of different ACPI calls available on the device), but this seems to be
enough to turn it off. We can add more features to this driver if anyone
ever cares about figuring out what the rest of the calls do or writing some
Linux userspace to implement the rest of it.
Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Intel Rapid Start Technology is a firmware-based suspend-to-disk
implementation. Once placed in S3, the device will wake once either a
timeout elapses or the battery reaches a critical level. It will then resume
to the firmware and copy the contents of RAM to a specialised partition, and
then power off the machine. If the user turns the machine back on the
firmware will copy the contents of the partition back to RAM and then resume
from S3 as normal.

This driver provides an interface for configuring the wakeup events and
timeout. It still requires firmware support and an appropriate suspend
partition.
Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

pvpanic device is a qemu simulated device through which guest panic
event is sent to host.
Signed-off-by: NHu Tao <hutao@cn.fujitsu.com>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

This adds the chromeos_laptop driver. It supports
the Cypress APA SMBUS touchpad as well as the isl29018 i2c ambient
light sensor on the Samsung Series 5 550 Chromebook.
Signed-off-by: NBenson Leung <bleung@chromium.org>
Reviewed-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>

Apple laptops with hybrid graphics have a device named gmux that
controls the muxing of the LVDS panel between the GPUs as well as screen
brightness. This driver adds support for the gmux device. Only backlight
control is supported initially.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Tested-by: NGrant Likely <grant.likely@secretlab.ca>

Several Satellite models have a buggy implementation of the INFO method
that causes ACPI exceptions when executed:

 ACPI Error: Result stack is empty! State=ffff88012d70f800 (20110413/dswstate-98)
 ACPI Exception: AE_AML_NO_RETURN_VALUE, Missing or null operand (20110413/dsutils-646)
 ACPI Exception: AE_AML_NO_RETURN_VALUE, While creating Arg 0 (20110413/dsutils-763)
 ACPI Error: Method parse/execution failed [\_SB_.VALZ.GETE] (Node ffff880131175eb0), AE_AML_NO_RETURN_VALUE (20110413/psparse-536)
 ACPI Error: Method parse/execution failed [\_SB_.VALZ.INFO] (Node ffff880131175ed8), AE_AML_NO_RETURN_VALUE (20110413/psparse-536)
 toshiba_acpi: ACPI INFO method execution failed
 toshiba_acpi: Failed to query hotkey event

All known machines with this implementation also have a WMI interface
with event GUID 59142400-C6A3-40FA-BADB-8A2652834100 which is not seen
on any other models. Refuse to load toshiba_acpi on machines with this
guid.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

All production devices operate in the Oaktrail configuration with legacy PC
elements present and an ACPI BIOS. Continue stripping out the Moorestown
elements from the tree leaving Medfield.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

asus_acpi only support old models, it has been deprecated since
2009 in favor of asus-laptop, it's not built by any (sane) distro,
so it is time to say good bye.

Thanks to Julien Lerouge and Karol Kozimor for the work they have
done on it, I would never have wrote asus-laptop and other asus
related drivers without asus_acpi.
Signed-off-by: NCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This patch adds support for some of the devices within a wide variety
of Fujitsu Tablet Computers, both convertibles and slates. Primarily
it allows for the automatic detection of the tablet/notebook mode for
convertible tablet pc's, and orientation for docked slates. It also
adds support for the application panel buttons usually found next to
the tablet screen, and docking station detection for slates.
Signed-off-by: NRobert Gerlach <khnz@gmx.de>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

An rfkill driver based on the fsaa1655g and fsam7440 drivers for
Fujitsu-Siemens Amilo A1655 and M7440 models found at:

http://sourceforge.net/projects/fsaa1655g/
http://sourceforge.net/projects/fsam7440/

This adds DMI matching, replaces the procfs files with rfkill devices,
and uses the proper functions to write to the i8042 safely.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

All production devices operate in the Oaktrail configuration
with legacy PC elements present and an ACPI BIOS.  Continue
stripping out the Moorestown elements from the tree leaving
Medfield.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-z0dxy88f949rvxo5vvd08ybs@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

This adds backlight control on the Samsung Q10 laptop, which does not support
the SABI interface. Also tested successfully on the Dell Latitude X200.
Signed-off-by: NFrederick van der Wyck <fvanderwyck@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NAmeya Palande <2ameya@gmail.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This driver implements an Extra ACPI EC driver for products based on Intel
Oaktrail platform.

This driver does below things:
1. registers itself in the Linux backlight control in
   /sys/class/backlight/intel_oaktrail/

2. registers in the rfkill subsystem here: /sys/class/rfkill/rfkillX/
   for these components: wifi, bluetooth, wwan (3g), gps
Signed-off-by: NYin Kangkai <kangkai.yin@linux.intel.com>

[Extracted from a bigger patch by Yin Kangkai, this version leaves out some
 sysfs bits that probably want to be driver managed, and ACPI i2c enumeration]
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

MXM is a laptop graphics card form-factor + interface specification,
this adds an initial stub driver to talk to the MXM WMI interface.

The only method used is the MUX switching method needed to do switchable
graphics on the nvidia chipsets.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Acked-by: NMatthew Garrett <mjg@redhat.com>

This adds the samsung-laptop driver to the kernel.  It now supports
all known Samsung laptops that use the SABI interface.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Introduce a new driver for Asus Notebooks shipped with
a WMI device instead of the old ACPI device. The WMI
device is almost the same as the one present in Eee PC,
but the event guid and the keymap are different.

The keymap comes from asus-laptop module.

On Asus notebooks, when you call the WMI device, you always
need a 64bit buffer, even if you only want to get the state
of a device (tested on a G73).
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

New Asus notebooks are using a WMI device similar to
the one used in Eee PCs. Since we don't want to load
eeepc-wmi module on Asus notebooks, and we want to
keep the eeepc-wmi module for backward compatibility,
this patch introduce a new module, named asus-wmi, that
will be used by eeepc-wmi and the new Asus Notebook WMI
Driver.

eeepc-wmi's input device strings (device name and phys)
are kept, but rfkill and led names are changed (s/eeepc/asus/).
This should not break anything since rfkill are used by type or
index, not by name, and the eeepc::touchpad led wasn't working
correctly before 2.6.39 anyway.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

New Asus notebooks are using a WMI device similar to
the one used in Eee PCs. Since we don't want to load
a module named eeepc-laptop on Asus Notebooks, start by
copying all the code to asus-wmi.c.
Signed-off-by: NCorentin Chary <corentincj@iksaif.net>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This is the basic thermal sensor driver for Intel MID platform using the
Medfield chipset. It plugs in via the thermal drivers and provides sensor
readings for the device sensors.
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Enable volume up and down hotkeys on WMI events
GUID 284A0E6B-380E-472A-921F-E52786257FB4 and
GUID 02314822-307C-4F66-bf0E-48AEAEB26CC8.

Also works around a firmware bug where the _WED method
should return an integer containing the key code and in fact
the method returns the key code in element zero of a buffer.

BugLink: http://bugs.launchpad.net/bugs/701530
BugLink: http://bugs.launchpad.net/bugs/676997Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The power button is connected to MSIC on Medfield, we will get two
interrupts from IOAPIC when pressing or releasing the power button.
Signed-off-by: NHong Liu <hong.liu@intel.com>
[Minor fixes as noted by Dmitry]
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The OLPC XO-1.5 has an ebook switch, triggered when the laptop
screen is rotated then folding down, converting the device into ebook
form.

This switch is exposed through ACPI. Add a driver that exposes it
to userspace as an input device.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Acked-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The hp_accel driver isn't a hardware monitoring driver, so it doesn't
belong to drivers/hwmon. Move it to drivers/platform/x86, assuming HP
doesn't ship non-x86 laptops.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Acked-by: NEric Piel <eric.piel@tremplin-utc.net>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Tested-by: NEric Piel <eric.piel@tremplin-utc.net>
Tested-by: NTakashi Iwai <tiwai@suse.de>

This driver implements ioctl and interfaces with intel scu ipc driver. It
is used to access pmic/msic registers from user space and firmware update
utility.
Signed-off-by: NSreedhara DS <sreedhara.ds@intel.com>
[Extensive clean up and debug]
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

After a period of RFC for this driver, I think it is ready
for inclusion in the platform-driver-x86 tree, hopefully to
be staged in the next merge window into Linus's tree.

--Vernon

------------------------------------------------------------

IBM Real-Time "SMI Free" mode driver

This driver supports the Real-Time Linux (RTL) BIOS feature.
The RTL feature allows non-fatal System Management Interrupts
(SMIs) to be disabled on supported IBM platforms and is
intended to be coupled with a user-space daemon to monitor
the hardware in a way that can be prioritized and scheduled
to better suit the requirements for the system.

The Device is presented as a special "_RTL_" table to the OS
in the Extended BIOS Data Area.  There is a simple protocol
for entering and exiting the mode at runtime.  This driver
creates a simple sysfs interface to allow a simple entry and
exit from RTL mode in the UFI/BIOS.

Since the driver is specific to IBM SystemX hardware (x86-
based servers) it only builds on x86 builds.  To reduce the
risk of loading on the wrong hardware, the module uses DMI
information and checks a list of servers that are known to
work.
Signed-off-by: NVernon Mauery <vernux@us.ibm.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Add a software rfkill switch for the WLAN interface in the OLPC XO-1
laptop. It uses the OLPC embedded controller to cut/restore power to
the Marvell WLAN chip on the motherboard.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The hdaps driver isn't a hardware monitoring driver, so it shouldn't
live under driver/hwmon. drivers/platform/x86 seems much more
appropriate, as the driver is only useful on x86 laptops.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Frank Seidel <frank@f-seidel.de>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The makefile didn't get updated when the driver changed name, which broke
the build.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Since the platform drivers doing more for laptops than just using specific
ACPI device. It will be good to change the name from *_acpi to *-laptop.

Reference: http://lkml.org/lkml/2010/8/14/154Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Acked-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>