[ Upstream commit cfef46d692efd852a0da6803f920cc756eea2855 ]

When a Tx timestamp is requested, a pointer to the skb is stored in the
ravb_tstamp_skb struct. This was done without an skb_get. There exists
the possibility that the skb could be freed by ravb_tx_free (when
ravb_tx_free is called from ravb_start_xmit) before the timestamp was
processed, leading to a use-after-free bug.

Use skb_get when filling a ravb_tstamp_skb struct, and add appropriate
frees/consumes when a ravb_tstamp_skb struct is freed.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Signed-off-by: NTho Vu <tho.vu.wh@rvc.renesas.com>
Signed-off-by: NKazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 44ef3a03252844a8753479b0cea7f29e4a804bdc ]

In i2400m_barker_db_init(), 'options_orig' is allocated through kstrdup()
to hold the original command line options. Then, the options are parsed.
However, if an error occurs during the parsing process, 'options_orig' is
not deallocated, leading to a memory leak bug. To fix this issue, free
'options_orig' before returning the error.
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3434341004a380f4e47c3a03d4320d43982162a0 ]

The driver name gets exposed in sysfs under /sys/bus/pci/drivers
so it should look like other devices. Change it to be common
format (instead of "Cavium PTP").

This is a trivial fix that was observed by accident because
Debian kernels were building this driver into kernel (bug).
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 80f0fe0934cd3daa13a5e4d48a103f469115b160 ]

There's no need to wait until a completion is received to unmap
TX descriptor buffers that have been passed to the hypervisor.
Instead unmap it when the hypervisor call has completed. This patch
avoids the possibility that a buffer will not be unmapped because
a TX completion is lost or mishandled.
Reported-by: NAbdul Haleem <abdhalee@linux.vnet.ibm.com>
Tested-by: NDevesh K. Singh <devesh_singh@in.ibm.com>
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f1472cb09f11ddb41d4be84f0650835cb65a9073 ]

In kalmia_init_and_get_ethernet_addr(), 'usb_buf' is allocated through
kmalloc(). In the following execution, if the 'status' returned by
kalmia_send_init_packet() is not 0, 'usb_buf' is not deallocated, leading
to memory leaks. To fix this issue, add the 'out' label to free 'usb_buf'.
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1eca92eef18719027d394bf1a2d276f43e7cf886 ]

In cx82310_bind(), 'dev->partial_data' is allocated through kmalloc().
Then, the execution waits for the firmware to become ready. If the firmware
is not ready in time, the execution is terminated. However, the allocated
'dev->partial_data' is not deallocated on this path, leading to a memory
leak bug. To fix this issue, free 'dev->partial_data' before returning the
error.
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit edc58dd0123b552453a74369bd0c8d890b497b4b ]

When dedupe wants to use the page cache to compare parts of two files
for dedupe, we must be very careful to handle locking correctly.  The
current code doesn't do this.  It must lock and unlock the page only
once if the two pages are the same, since the overlapping range check
doesn't catch this when blocksize < pagesize.  If the pages are distinct
but from the same file, we must observe page locking order and lock them
in order of increasing offset to avoid clashing with writeback locking.

Fixes: 876bec6f ("vfs: refactor clone/dedupe_file_range common functions")
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBill O'Donnell <billodo@redhat.com>
Reviewed-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b9cbf8a64865b50fd0f4a3915fa00ac7365cdf8f ]

In lan78xx_probe(), a new urb is allocated through usb_alloc_urb() and
saved to 'dev->urb_intr'. However, in the following execution, if an error
occurs, 'dev->urb_intr' is not deallocated, leading to memory leaks. To fix
this issue, invoke usb_free_urb() to free the allocated urb before
returning from the function.
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 20fb7c7a39b5c719e2e619673b5f5729ee7d2306 ]

In myri10ge_probe(), myri10ge_alloc_slices() is invoked to allocate slices
related structures. Later on, myri10ge_request_irq() is used to get an irq.
However, if this process fails, the allocated slices related structures are
not deallocated, leading to memory leaks. To fix this issue, revise the
target label of the goto statement to 'abort_with_slices'.
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6f967f8b1be7001b31c46429f2ee7d275af2190f ]

If oct->fn_list.enable_io_queues() fails, no cleanup is executed, leading
to memory/resource leaks. To fix this issue, invoke
octeon_delete_instr_queue() before returning from the function.
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c554336efa9bbc28d6ec14efbee3c7d63c61a34f ]

In blocked_fl_write(), 't' is not deallocated if bitmap_parse_user() fails,
leading to a memory leak bug. To fix this issue, free t before returning
the error.
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a86a75865ff4d8c05f355d1750a5250aec89ab15 ]

In tcmu_handle_completion() function, the variable called read_len is
always initialized with a value taken from se_cmd structure. If this
function is called to complete an expired (timed out) out command, the
session command pointed by se_cmd is likely to be already deallocated by
the target core at that moment. As the result, this access triggers a
use-after-free warning from KASAN.

This patch fixes the code not to touch se_cmd when completing timed out
TCMU commands. It also resets the pointer to se_cmd at the time when the
TCMU_CMD_BIT_EXPIRED flag is set because it is going to become invalid
after calling target_complete_cmd() later in the same function,
tcmu_check_expired_cmd().
Signed-off-by: NDmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 26fa656e9a0cbccddf7db132ea020d2169dbe46e ]

If HBA initialization fails unexpectedly (exiting via probe_failed:), we
may fail to free vha->gnl.l. So that we don't attempt to double free, set
this pointer to NULL after a free and check for NULL at probe_failed: so we
know whether or not to call dma_free_coherent.
Signed-off-by: NBill Kuzeja <william.kuzeja@stratus.com>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 070955558e820b9a89c570b91b1f21762f62b288 ]

This driver requires imported PRIME buffers to appear contiguously in
its IO address space. Make sure this is the case by setting the maximum
DMA segment size to a more suitable value than the default 64KB.
Signed-off-by: NAlexandre Courbot <acourbot@chromium.org>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Signed-off-by: NCK Hu <ck.hu@mediatek.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4c6f3196e6ea111c456c6086dc3f57d4706b0b2d ]

PRIME buffers should be imported using the DMA device. To this end, use
a custom import function that mimics drm_gem_prime_import_dev(), but
passes the correct device.

Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: NAlexandre Courbot <acourbot@chromium.org>
Signed-off-by: NCK Hu <ck.hu@mediatek.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit dfe42be15fde16232340b8b2a57c359f51cc10d9 ]

TCP rst and fin packets do not qualify to place a flow into the
flowtable. Most likely there will be no more packets after connection
closure. Without this patch, this flow entry expires and connection
tracking picks up the entry in ESTABLISHED state using the fixup
timeout, which makes this look inconsistent to the user for a connection
that is actually already closed.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 68e03b85474a51ec1921b4d13204782594ef7223 ]

when do randbuilding, I got this error:

In file included from drivers/hwmon/pmbus/ucd9000.c:19:0:
./include/linux/gpio/driver.h:576:1: error: redefinition of gpiochip_add_pin_range
 gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
 ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/hwmon/pmbus/ucd9000.c:18:0:
./include/linux/gpio.h:245:1: note: previous definition of gpiochip_add_pin_range was here
 gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
 ^~~~~~~~~~~~~~~~~~~~~~
Reported-by: NHulk Robot <hulkci@huawei.com>
Fixes: 964cb341 ("gpio: move pincontrol calls to <linux/gpio/driver.h>")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190731123814.46624-1-yuehaibing@huawei.comSigned-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 66cf4710b23ab2adda11155684a2c8826f4fe732 ]

The ibm,mac-address-filters property defines the maximum number of
addresses the hypervisor's multicast filter list can support. It is
encoded as a big-endian integer in the OF device tree, but the virtual
ethernet driver does not convert it for use by little-endian systems.
As a result, the driver is not behaving as it should on affected systems
when a large number of multicast addresses are assigned to the device.
Reported-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8059ba0bd0e4694e51c2ee6438a77b325f06c0d5 ]

On WCN3990 downloading the NVM sometimes fails with a "TLV response
size mismatch" error:

[  174.949955] Bluetooth: btqca.c:qca_download_firmware() hci0: QCA Downloading qca/crnv21.bin
[  174.958718] Bluetooth: btqca.c:qca_tlv_send_segment() hci0: QCA TLV response size mismatch

It seems the controller needs a short time after downloading the
firmware before it is ready for the NVM. A delay as short as 1 ms
seems sufficient, make it 10 ms just in case. No event is received
during the delay, hence we don't just silently drop an extra event.
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 125b7e0949d4e72b15c2b1a1590f8cece985a918 ]

clang warns:

drivers/net/ethernet/toshiba/tc35815.c:1507:30: warning: use of logical
'&&' with constant operand [-Wconstant-logical-operand]
                        if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN)
                                                  ^  ~~~~~~~~~~~~
drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: use '&' for a
bitwise operation
                        if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN)
                                                  ^~
                                                  &
drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: remove constant to
silence this warning
                        if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN)
                                                 ~^~~~~~~~~~~~~~~
1 warning generated.

Explicitly check that NET_IP_ALIGN is not zero, which matches how this
is checked in other parts of the tree. Because NET_IP_ALIGN is a build
time constant, this check will be constant folded away during
optimization.

Fixes: 82a9928d ("tc35815: Enable StripCRC feature")
Link: https://github.com/ClangBuiltLinux/linux/issues/608Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6d0d779dca73cd5acb649c54f81401f93098b298 ]

This fixes a warning of "suspicious rcu_dereference_check() usage"
when nload runs.

Fixes: 776e726b ("netvsc: fix RCU warning in get_stats")
Signed-off-by: NDexuan Cui <decui@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b3e78adcbf991a4e8b2ebb23c9889e968ec76c5f ]

Change an error message to work for any object being
pinned not just programs.

Fixes: 71bb428f ("tools: bpf: add bpftool")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6a0a8d10a3661a036b55af695542a714c429ab7c ]

If a rule that has already a bound anonymous set fails to be added, the
preparation phase releases the rule and the bound set. However, the
transaction object from the abort path still has a reference to the set
object that is stale, leading to a use-after-free when checking for the
set->bound field. Add a new field to the transaction that specifies if
the set is bound, so the abort path can skip releasing it since the rule
command owns it and it takes care of releasing it. After this update,
the set->bound field is removed.

[   24.649883] Unable to handle kernel paging request at virtual address 0000000000040434
[   24.657858] Mem abort info:
[   24.660686]   ESR = 0x96000004
[   24.663769]   Exception class = DABT (current EL), IL = 32 bits
[   24.669725]   SET = 0, FnV = 0
[   24.672804]   EA = 0, S1PTW = 0
[   24.675975] Data abort info:
[   24.678880]   ISV = 0, ISS = 0x00000004
[   24.682743]   CM = 0, WnR = 0
[   24.685723] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000428952000
[   24.692207] [0000000000040434] pgd=0000000000000000
[   24.697119] Internal error: Oops: 96000004 [#1] SMP
[...]
[   24.889414] Call trace:
[   24.891870]  __nf_tables_abort+0x3f0/0x7a0
[   24.895984]  nf_tables_abort+0x20/0x40
[   24.899750]  nfnetlink_rcv_batch+0x17c/0x588
[   24.904037]  nfnetlink_rcv+0x13c/0x190
[   24.907803]  netlink_unicast+0x18c/0x208
[   24.911742]  netlink_sendmsg+0x1b0/0x350
[   24.915682]  sock_sendmsg+0x4c/0x68
[   24.919185]  ___sys_sendmsg+0x288/0x2c8
[   24.923037]  __sys_sendmsg+0x7c/0xd0
[   24.926628]  __arm64_sys_sendmsg+0x2c/0x38
[   24.930744]  el0_svc_common.constprop.0+0x94/0x158
[   24.935556]  el0_svc_handler+0x34/0x90
[   24.939322]  el0_svc+0x8/0xc
[   24.942216] Code: 37280300 f9404023 91014262 aa1703e0 (f9401863)
[   24.948336] ---[ end trace cebbb9dcbed3b56f ]---

Fixes: f6ac85858976 ("netfilter: nf_tables: unbind set in rule from commit path")
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8c25d0887a8bd0e1ca2074ac0c6dff173787a83b ]

As spin_unlock_irq will enable interrupts.
Function tsi108_stat_carry is called from interrupt handler tsi108_irq.
Interrupts are enabled in interrupt handler.
Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq
in IRQ context to avoid this.
Signed-off-by: NFuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 73b114ee7db1750c0b535199fae383b109bd61d0 ]

On long running tests with a mcp2517fd can controller it showed that
on rare occations the data read shows corruptions for longer spi transfers.

Example of a 22 byte transfer:

expected (as captured on logic analyzer):
FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 85 86 87 88 89 8a 8b

read by the driver:
FF FF 78 00 00 00 08 06 00 00 91 20 77 56 84 88 89 8a 00 00 8b 9b

To fix this use BCM2835_AUX_SPI_STAT_RX_LVL to determine when we may
read data from the fifo reliably without any corruption.

Surprisingly the only values ever empirically read in
BCM2835_AUX_SPI_STAT_RX_LVL are 0x00, 0x10, 0x20 and 0x30.
So whenever the mask is not 0 we can read from the fifo in a safe manner.

The patch has now been tested intensively and we are no longer
able to reproduce the "RX" issue any longer.

Fixes: 1ea29b39 ("spi: bcm2835aux: add bcm2835 auxiliary spi device...")
Reported-by: NHubert Denkmair <h.denkmair@intence.de>
Signed-off-by: NMartin Sperl <kernel@martin.sperl.org>
Acked-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c7de8500fd8ecbb544846dd5f11dca578c3777e1 ]

This read of the fifo is a potential candidate for a race condition
as the spi transfer is not necessarily finished and so can lead to
an early read of the fifo that still misses data.

So it has been removed.

Fixes: 1ea29b39 ("spi: bcm2835aux: add bcm2835 auxiliary spi device...")
Suggested-by: NHubert Denkmair <h.denkmair@intence.de>
Signed-off-by: NMartin Sperl <kernel@martin.sperl.org>
Acked-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7188a6f0eee3f1fae5d826cfc6d569657ff950ec ]

Sharing more code between polling and interrupt-driven mode.
Signed-off-by: NMartin Sperl <kernel@martin.sperl.org>
Acked-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 29d9a0b50736768f042752070e5cdf4e4d4c00df upstream.

Commit

  a90118c445cc ("x86/boot: Save fields explicitly, zero out everything else")

now zeroes the secure boot setting information (enabled/disabled/...)
passed by the boot loader or by the kernel's EFI handover mechanism.

The problem manifests itself with signed kernels using the EFI handoff
protocol with grub and the kernel loses the information whether secure
boot is enabled in the firmware, i.e., the log message "Secure boot
enabled" becomes "Secure boot could not be determined".

efi_main() arch/x86/boot/compressed/eboot.c sets this field early but it
is subsequently zeroed by the above referenced commit.

Include boot_params.secure_boot in the preserve field list.

 [ bp: restructure commit message and massage. ]

Fixes: a90118c445cc ("x86/boot: Save fields explicitly, zero out everything else")
Signed-off-by: NJohn S. Gruber <JohnSGruber@gmail.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: stable <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/CAPotdmSPExAuQcy9iAHqX3js_fc4mMLQOTr5RBGvizyCOPcTQQ@mail.gmail.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7d0a06586b2686ba80c4a2da5f91cb10ffbea736 ]

The rds6_inc_info_copy() function has a couple struct members which
are leaking stack information.  The ->tos field should hold actual
information and the ->flags field needs to be zeroed out.

Fixes: 3eb450367d08 ("rds: add type of service(tos) infrastructure")
Fixes: b7ff8b10 ("rds: Extend RDS API for IPv6 support")
Reported-by: N黄ID蝴蝶 <butterflyhuangxx@gmail.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NKa-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fdfc5c8594c24c5df883583ebd286321a80e0a67 ]

Vladimir Rutsky reported stuck TCP sessions after memory pressure
events. Edge Trigger epoll() user would never receive an EPOLLOUT
notification allowing them to retry a sendmsg().

Jason tested the case of sk_stream_alloc_skb() returning NULL,
but there are other paths that could lead both sendmsg() and sendpage()
to return -1 (EAGAIN), with an empty skb queued on the write queue.

This patch makes sure we remove this empty skb so that
Jason code can detect that the queue is empty, and
call sk->sk_write_space(sk) accordingly.

Fixes: ce5ec440 ("tcp: ensure epoll edge trigger wakeup when write queue is empty")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Reported-by: NVladimir Rutsky <rutsky@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 888a5c53c0d8be6e98bc85b677f179f77a647873 ]

TCP associates tx timestamp requests with a byte in the bytestream.
If merging skbs in tcp_mtu_probe, migrate the tstamp request.

Similar to MSG_EOR, do not allow moving a timestamp from any segment
in the probe but the last. This to avoid merging multiple timestamps.

Tested with the packetdrill script at
https://github.com/wdebruij/packetdrill/commits/mtu_probe-1

Link: http://patchwork.ozlabs.org/patch/1143278/#2232897
Fixes: 4ed2d765 ("net-timestamp: TCP timestamping")
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3b25528e1e355c803e73aa326ce657b5606cda73 ]

The devicetree binding lists the phy phy as optional. As such, the
driver should not bail out if it can't find a regulator. Instead it
should just skip the remaining regulator related code and continue
on normally.

Skip the remainder of phy_power_on() if a regulator supply isn't
available. This also gets rid of the bogus return code.

Fixes: 2e12f536 ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator")
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 981471bd3abf4d572097645d765391533aac327d ]

The net pointer in struct xt_tgdtor_param is not explicitly
initialized therefore is still NULL when dereferencing it.
So we have to find a way to pass the correct net pointer to
ipt_destroy_target().

The best way I find is just saving the net pointer inside the per
netns struct tcf_idrinfo, which could make this patch smaller.

Fixes: 0c66dc1e ("netfilter: conntrack: register hooks in netns when needed by ruleset")
Reported-and-tested-by: itugrok@yahoo.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit dbf47a2a094edf58983265e323ca4bdcdb58b5ee ]

Action sample doesn't properly handle psample_group pointer in overwrite
case. Following issues need to be fixed:

- In tcf_sample_init() function RCU_INIT_POINTER() is used to set
  s->psample_group, even though we neither setting the pointer to NULL, nor
  preventing concurrent readers from accessing the pointer in some way.
  Use rcu_swap_protected() instead to safely reset the pointer.

- Old value of s->psample_group is not released or deallocated in any way,
  which results resource leak. Use psample_group_put() on non-NULL value
  obtained with rcu_swap_protected().

- The function psample_group_put() that released reference to struct
  psample_group pointed by rcu-pointer s->psample_group doesn't respect rcu
  grace period when deallocating it. Extend struct psample_group with rcu
  head and use kfree_rcu when freeing it.

Fixes: 5c5670fa ("net/sched: Introduce sample tc action")
Signed-off-by: NVlad Buslov <vladbu@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2c1644cf6d46a8267d79ed95cb9b563839346562 ]

After commit baeababb
("tun: return NET_XMIT_DROP for dropped packets"),
when tun_net_xmit drop packets, it will free skb and return NET_XMIT_DROP,
netpoll_send_skb_on_dev will run into following use after free cases:
1. retry netpoll_start_xmit with freed skb;
2. queue freed skb in npinfo->txq.
queue_process will also run into use after free case.

hit netpoll_send_skb_on_dev first case with following kernel log:

[  117.864773] kernel BUG at mm/slub.c:306!
[  117.864773] invalid opcode: 0000 [#1] SMP PTI
[  117.864774] CPU: 3 PID: 2627 Comm: loop_printmsg Kdump: loaded Tainted: P           OE     5.3.0-050300rc5-generic #201908182231
[  117.864775] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
[  117.864775] RIP: 0010:kmem_cache_free+0x28d/0x2b0
[  117.864781] Call Trace:
[  117.864781]  ? tun_net_xmit+0x21c/0x460
[  117.864781]  kfree_skbmem+0x4e/0x60
[  117.864782]  kfree_skb+0x3a/0xa0
[  117.864782]  tun_net_xmit+0x21c/0x460
[  117.864782]  netpoll_start_xmit+0x11d/0x1b0
[  117.864788]  netpoll_send_skb_on_dev+0x1b8/0x200
[  117.864789]  __br_forward+0x1b9/0x1e0 [bridge]
[  117.864789]  ? skb_clone+0x53/0xd0
[  117.864790]  ? __skb_clone+0x2e/0x120
[  117.864790]  deliver_clone+0x37/0x50 [bridge]
[  117.864790]  maybe_deliver+0x89/0xc0 [bridge]
[  117.864791]  br_flood+0x6c/0x130 [bridge]
[  117.864791]  br_dev_xmit+0x315/0x3c0 [bridge]
[  117.864792]  netpoll_start_xmit+0x11d/0x1b0
[  117.864792]  netpoll_send_skb_on_dev+0x1b8/0x200
[  117.864792]  netpoll_send_udp+0x2c6/0x3e8
[  117.864793]  write_msg+0xd9/0xf0 [netconsole]
[  117.864793]  console_unlock+0x386/0x4e0
[  117.864793]  vprintk_emit+0x17e/0x280
[  117.864794]  vprintk_default+0x29/0x50
[  117.864794]  vprintk_func+0x4c/0xbc
[  117.864794]  printk+0x58/0x6f
[  117.864795]  loop_fun+0x24/0x41 [printmsg_loop]
[  117.864795]  kthread+0x104/0x140
[  117.864795]  ? 0xffffffffc05b1000
[  117.864796]  ? kthread_park+0x80/0x80
[  117.864796]  ret_from_fork+0x35/0x40
Signed-off-by: NFeng Sun <loyou85@gmail.com>
Signed-off-by: NXiaojun Zhao <xiaojunzhao141@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a84d016479896b5526a2cc54784e6ffc41c9d6f6 ]

Similar to the fix done for IPv4 in commit e5b1c6c6277d
("igmp: fix memory leak in igmpv3_del_delrec()"), we need to
make sure mca_tomb and mca_sources are not blindly overwritten.

Using swap() then a call to ip6_mc_clear_src() will take care
of the missing free.

BUG: memory leak
unreferenced object 0xffff888117d9db00 (size 64):
  comm "syz-executor247", pid 6918, jiffies 4294943989 (age 25.350s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 fe 88 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000005b463030>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<000000005b463030>] slab_post_alloc_hook mm/slab.h:522 [inline]
    [<000000005b463030>] slab_alloc mm/slab.c:3319 [inline]
    [<000000005b463030>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
    [<00000000939cbf94>] kmalloc include/linux/slab.h:552 [inline]
    [<00000000939cbf94>] kzalloc include/linux/slab.h:748 [inline]
    [<00000000939cbf94>] ip6_mc_add1_src net/ipv6/mcast.c:2236 [inline]
    [<00000000939cbf94>] ip6_mc_add_src+0x31f/0x420 net/ipv6/mcast.c:2356
    [<00000000d8972221>] ip6_mc_source+0x4a8/0x600 net/ipv6/mcast.c:449
    [<000000002b203d0d>] do_ipv6_setsockopt.isra.0+0x1b92/0x1dd0 net/ipv6/ipv6_sockglue.c:748
    [<000000001f1e2d54>] ipv6_setsockopt+0x89/0xd0 net/ipv6/ipv6_sockglue.c:944
    [<00000000c8f7bdf9>] udpv6_setsockopt+0x4e/0x90 net/ipv6/udp.c:1558
    [<000000005a9a0c5e>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3139
    [<00000000910b37b2>] __sys_setsockopt+0x10f/0x220 net/socket.c:2084
    [<00000000e9108023>] __do_sys_setsockopt net/socket.c:2100 [inline]
    [<00000000e9108023>] __se_sys_setsockopt net/socket.c:2097 [inline]
    [<00000000e9108023>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2097
    [<00000000f4818160>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296
    [<000000008d367e8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 1666d49e ("mld: do not remove mld souce list info when set link down")
Fixes: 9c8bb163 ("igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 3d180fe5 which is
commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c upstream.

This patch depends on an other series:
https://patchwork.kernel.org/project/linux-input/list/?series=122327&state=%2A&archive=both

It was a mistake to backport it in the v5.2 branch, as there
is a high chance we encounter a touchpad that needs the series
above.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=204733
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204771Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 714a8438 which is
commit 40aa5383e393d72f6aa3943a4e7b1aae25a1e43b upstream.

Mark Brown writes:
	I nacked this patch when Sasha posted it - it only improves
	diagnostics and might make systems that worked by accident break
	since it turns things into a hard failure, it won't make
	anything that didn't work previously work.
Reported-by: NMark Brown <broonie@kernel.org>
Cc: Ricard Wanderlof <ricardw@axis.com>
Cc: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/lkml/20190904181027.GG4348@sirena.co.ukSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>