* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  sg: disable interrupts inside sg_copy_buffer

Change the MN10300 fault handler to make it check in_atomic() rather than
in_interrupt() as commit 6edaf68a did for other
architectures:

	Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
	Date:   Wed Dec 6 20:32:18 2006 -0800

	[PATCH] mm: arch do_page_fault() vs in_atomic()

	In light of the recent pagefault and filemap_copy_from_user work I've
	gone through all the arch pagefault handlers to make sure the
	inc_preempt_count() 'feature' works as expected.

	Several sections of code (including the new filemap_copy_from_user)
	rely on the fact that faults do not take locks under increased preempt
	count.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The callers of sg_copy_buffer must disable interrupts before calling
it (since it uses kmap_atomic). Some callers use it on
interrupt-disabled code but some need to take the trouble to disable
interrupts just for this. No wonder they forget about it and we hit a
bug like:

http://bugzilla.kernel.org/show_bug.cgi?id=11529

James said that it might be better to disable interrupts inside the
function rather than risk the callers getting it wrong.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: disable sysfs parts of the disk command filter

* 'kvm-updates/2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: VMX: Always return old for clear_flush_young() when using EPT
  KVM: SVM: fix guest global tlb flushes with NPT
  KVM: SVM: fix random segfaults with NPT enabled

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] fix check of PQ and PDT bits for WLUNs
  [SCSI] make scsi_check_sense HARDWARE_ERROR return ADD_TO_MLQUEUE on retry
  [SCSI] scsi_dh: make check_sense return ADD_TO_MLQUEUE
  [SCSI] zfcp: Remove duplicated unlikely() macros.
  [SCSI] zfcp: channel cannot be detached due to refcount imbalance
  [SCSI] zfcp: Fix reference counter for remote ports
  [SCSI] zfcp: Simplify ccw notify handler
  [SCSI] zfcp: Correctly query end flag in gpn_ft response
  [SCSI] zfcp: Fix request queue locking
  [SCSI] sd: select CRC_T10DIF only when necessary

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] prevent ia64 from invoking irq handlers on offline CPUs
  [IA64] arch/ia64/sn/pci/tioca_provider.c: introduce missing kfree
  [IA64] fix up bte.h
  [IA64] fix compile failure with non modular builds

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: add llseek method
  udf: Fix error paths in udf_new_inode()
  udf: Fix lock inversion between iprune_mutex and alloc_mutex (v2)

We still have life time issues with the sysfs command filter kobject,
so disable it for 2.6.27 release. We can revisit this and make it work
properly for 2.6.28, for 2.6.27 release it's too risky.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

As well as discard fake accessed bit and dirty bit of EPT.
Signed-off-by: NSheng Yang <sheng.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Accesses to CR4 are intercepted even with Nested Paging enabled. But the code
does not check if the guest wants to do a global TLB flush. So this flush gets
lost. This patch adds the check and the flush to svm_set_cr4.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch introduces a guest TLB flush on every NPF exit in KVM. This fixes
random segfaults and #UD exceptions in the guest seen under some workloads
(e.g. long running compile workloads or tbench). A kernbench run with and
without that fix showed that it has a slowdown lower than 0.5%

Cc: stable@kernel.org
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  add deprecated ide-scsi to feature-removal-schedule.txt
  ide: Fix pointer arithmetic in hpt3xx driver code (3rd try)

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit 0d3244d6 ("V4L/DVB (8342):
sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3") introduced
VIDEO_SH_MOBILE_CEU, which selects VIDEOBUF_DMA_CONTIG. This circumvents the
dependency on HAS_DMA of VIDEOBUF_DMA_CONTIG.

Add a dependency on HAS_DMA to VIDEO_SH_MOBILE_CEU to fix this.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes a SWIOTLB oops

With SWIOTLB being enabled and straight-forward page allocation
failure [1], the swiotlb_alloc_coherent fall-back path hits an
issue [2], resulting in my webcam failing to work.

At the time of oops, RDI is clearly a pointer to a structure which
has arrived as NULL, leading to the typo in swiotlb_map_single's
callsite arguments.

Correctly passing the device structure [3] addresses the issue and
gets my webcam working again (the allocation failure still occuring).

 --- [1]

skype: page allocation failure. order:3, mode:0x1
Pid: 5895, comm: skype Not tainted 2.6.27-rc6-235c-debug #1

Call Trace:
 [<ffffffff802b7cf0>] __alloc_pages_internal+0x4a0/0x5d0
 [<ffffffff802d5ddd>] alloc_pages_current+0xad/0x110
 [<ffffffff802b4ccd>] __get_free_pages+0x1d/0x60
 [<ffffffff8046cd39>] swiotlb_alloc_coherent+0x49/0x180
 [<ffffffff80212731>] dma_alloc_coherent+0x281/0x310
 [<ffffffff805621c0>] hcd_buffer_alloc+0x50/0x90
 [<ffffffff805547fd>] usb_buffer_alloc+0x2d/0x40
 [<ffffffffa0056763>] uvc_alloc_urb_buffers+0x53/0xf0 [uvcvideo]
 [<ffffffffa0056958>] uvc_init_video+0x158/0x3e0 [uvcvideo]
 [<ffffffffa0056c17>] uvc_video_enable+0x37/0x80 [uvcvideo]
 [<ffffffffa0055853>] uvc_v4l2_do_ioctl+0x723/0x1260 [uvcvideo]
 [<ffffffff8026dd61>] ? trace_hardirqs_off_caller+0x21/0xc0
 [<ffffffff8026dd61>] ? trace_hardirqs_off_caller+0x21/0xc0
 [<ffffffffa0032c9f>] video_usercopy+0x19f/0x390 [videodev]
 [<ffffffffa0055130>] ? uvc_v4l2_do_ioctl+0x0/0x1260 [uvcvideo]
 [<ffffffff8026d0ce>] ? put_lock_stats+0xe/0x30
 [<ffffffffa0054dad>] uvc_v4l2_ioctl+0x4d/0x80 [uvcvideo]
 [<ffffffffa0045083>] native_ioctl+0x83/0x90 [compat_ioctl32]
 [<ffffffffa004534e>] v4l_compat_ioctl32+0x2be/0x1da4 [compat_ioctl32]
 [<ffffffff806aad21>] ? do_page_fault+0x3d1/0xae0
 [<ffffffff80270ccd>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff80270c59>] ? trace_hardirqs_on_caller+0x149/0x1b0
 [<ffffffff80270ccd>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff80329afa>] compat_sys_ioctl+0x8a/0x3c0
 [<ffffffff806a700d>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff8022f816>] sysenter_dispatch+0x7/0x2c
 [<ffffffff806a6fce>] ? trace_hardirqs_on_thunk+0x3a/0x3f

Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
CPU    1: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:  186, btch:  31 usd:   3
CPU    1: hi:  186, btch:  31 usd:   0
Node 0 Normal per-cpu:
CPU    0: hi:  186, btch:  31 usd:  23
CPU    1: hi:  186, btch:  31 usd: 179
Active:78545 inactive:48683 dirty:31 writeback:0 unstable:2
 free:830202 slab:17516 mapped:17473 pagetables:3496 bounce:0
Node 0 DMA free:36kB min:28kB low:32kB high:40kB active:0kB
inactive:0kB present:15156kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 3207 3956 3956
Node 0 DMA32 free:3197192kB min:6512kB low:8140kB high:9768kB
active:0kB inactive:0kB present:3284896kB pages_scanned:0
all_unreclaimable? no
lowmem_reserve[]: 0 0 748 748
Node 0 Normal free:123580kB min:1516kB low:1892kB high:2272kB
active:314180kB inactive:194732kB present:766464kB pages_scanned:0
all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 1*4kB 0*8kB 0*16kB 1*32kB 0*64kB 0*128kB 0*256kB 0*512kB
0*1024kB 0*2048kB 0*4096kB = 36kB
Node 0 DMA32: 4*4kB 3*8kB 2*16kB 3*32kB 4*64kB 5*128kB 3*256kB 5*512kB
4*1024kB 5*2048kB 776*4096kB = 3197224kB
Node 0 Normal: 14*4kB 14*8kB 8*16kB 6*32kB 1*64kB 3*128kB 3*256kB
2*512kB 4*1024kB 1*2048kB 28*4096kB = 123560kB
64847 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap  = 502752kB
Total swap = 502752kB
1048576 pages RAM
52120 pages reserved
71967 pages shared
143004 pages non-shared

 --- [2]

BUG: unable to handle kernel NULL pointer dereference at 00000000000002c8
IP: [<ffffffff8046c84c>] map_single+0x1c/0x280
PGD 10e54e067 PUD 10e595067 PMD 0
Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC
CPU 0
Modules linked in: kvm_intel kvm microcode uvcvideo compat_ioctl32
videodev v4l1_compat shpchp pci_hotplug
Pid: 5895, comm: skype Not tainted 2.6.27-rc6-235c-debug #1
RIP: 0010:[<ffffffff8046c84c>]  [<ffffffff8046c84c>] map_single+0x1c/0x280
RSP: 0018:ffff88010e78d988  EFLAGS: 00210296
RAX: 0000780000000000 RBX: 0000000000000000 RCX: 0000000000000002
RDX: 0000000000005000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88010e78d9e8 R08: 0000000000000000 R09: 0000000000000001
R10: ffff88010e78d698 R11: 0000000000000001 R12: 0000000000000002
R13: 0000000000000000 R14: 0000000000005000 R15: ffff88012f1c9968
FS:  0000000000000000(0000) GS:ffffffff80a6cdc0(0063) knlGS:00000000f6355b90
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 00000000000002c8 CR3: 000000010e57d000 CR4: 00000000000026e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process skype (pid: 5895, threadinfo ffff88010e78c000, task ffff88012b9cc460)
Stack:  0000000200000000 0000000000005000 0000000000000000 0000000000000000
 00000000000017b8 0000000000000000 ffff88010e78d9c8 0000000000000000
 0000000000000002 0000000000000000 0000000000005000 ffff88012f1c9968
Call Trace:
 [<ffffffff8046cbb0>] swiotlb_map_single_attrs+0x60/0xf0
 [<ffffffff8046cc4c>] swiotlb_map_single+0xc/0x10
 [<ffffffff8046cdee>] swiotlb_alloc_coherent+0xfe/0x180
 [<ffffffff80212731>] dma_alloc_coherent+0x281/0x310
 [<ffffffff805621c0>] hcd_buffer_alloc+0x50/0x90
 [<ffffffff805547fd>] usb_buffer_alloc+0x2d/0x40
 [<ffffffffa0056763>] uvc_alloc_urb_buffers+0x53/0xf0 [uvcvideo]
 [<ffffffffa0056958>] uvc_init_video+0x158/0x3e0 [uvcvideo]
 [<ffffffffa0056c17>] uvc_video_enable+0x37/0x80 [uvcvideo]
 [<ffffffffa0055853>] uvc_v4l2_do_ioctl+0x723/0x1260 [uvcvideo]
 [<ffffffff8026dd61>] ? trace_hardirqs_off_caller+0x21/0xc0
 [<ffffffff8026dd61>] ? trace_hardirqs_off_caller+0x21/0xc0
 [<ffffffffa0032c9f>] video_usercopy+0x19f/0x390 [videodev]
 [<ffffffffa0055130>] ? uvc_v4l2_do_ioctl+0x0/0x1260 [uvcvideo]
 [<ffffffff8026d0ce>] ? put_lock_stats+0xe/0x30
 [<ffffffffa0054dad>] uvc_v4l2_ioctl+0x4d/0x80 [uvcvideo]
 [<ffffffffa0045083>] native_ioctl+0x83/0x90 [compat_ioctl32]
 [<ffffffffa004534e>] v4l_compat_ioctl32+0x2be/0x1da4 [compat_ioctl32]
 [<ffffffff806aad21>] ? do_page_fault+0x3d1/0xae0
 [<ffffffff80270ccd>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff80270c59>] ? trace_hardirqs_on_caller+0x149/0x1b0
 [<ffffffff80270ccd>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff80329afa>] compat_sys_ioctl+0x8a/0x3c0
 [<ffffffff806a700d>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff8022f816>] sysenter_dispatch+0x7/0x2c
 [<ffffffff806a6fce>] ? trace_hardirqs_on_thunk+0x3a/0x3f

Code: 45 31 c0 48 89 e5 e8 a4 ff ff ff c9 c3 66 90 55 48 89 e5 41 57
41 56 41 55 41 54 53 48 83 ec 38 48 89 75 b0 48 89 55 a8 89 4d a4 <48>
8b 87 c8 02 00 00 48 85 c0 0f 84 1c 02 00 00 48 8b 58 08 48
RIP  [<ffffffff8046c84c>] map_single+0x1c/0x280
 RSP <ffff88010e78d988>
CR2: 00000000000002c8
---[ end trace 5d15baeeb7025a0e ]---

 --- [3]

ffffffff8046c830 <map_single>:
map_single():
/store/kernel/linux/lib/swiotlb.c:291
ffffffff8046c830:       55                      push   %rbp
ffffffff8046c831:       48 89 e5                mov    %rsp,%rbp
ffffffff8046c834:       41 57                   push   %r15
ffffffff8046c836:       41 56                   push   %r14
ffffffff8046c838:       41 55                   push   %r13
ffffffff8046c83a:       41 54                   push   %r12
ffffffff8046c83c:       53                      push   %rbx
ffffffff8046c83d:       48 83 ec 38             sub    $0x38,%rsp
ffffffff8046c841:       48 89 75 b0             mov    %rsi,-0x50(%rbp)
ffffffff8046c845:       48 89 55 a8             mov    %rdx,-0x58(%rbp)
ffffffff8046c849:       89 4d a4                mov    %ecx,-0x5c(%rbp)
dma_get_seg_boundary():
/store/kernel/linux/include/linux/dma-mapping.h:80
ffffffff8046c84c:       48 8b 87 c8 02 00 00    mov    0x2c8(%rdi),%rax <----

 --- [4]
Signed-off-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

git commit 74811f35 causes crash at
module load (or boot) time on my machine with a hpt374 controller.
The reason for this is that for initializing second controller which sets
(hwif->dev == host->dev[1]) to true (1), adds 1 to a void ptr, which
advances it by one byte instead of advancing it by sizeof(hpt_info) bytes.
Because of this, all initialization functions get corrupted data in info
variable which causes a crash at boot time.

This patch fixes that and makes my machine boot again.

The card itself is a HPT374 raid conroller: Here is the lspci -v output:
03:06.0 RAID bus controller: HighPoint Technologies, Inc. HPT374 (rev
07)
        Subsystem: HighPoint Technologies, Inc. Unknown device 0001
        Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 28
        I/O ports at 8000 [size=8]
        I/O ports at 7800 [size=4]
        I/O ports at 7400 [size=8]
        I/O ports at 7000 [size=4]
        I/O ports at 6800 [size=256]
        Expansion ROM at fe8e0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2

03:06.1 RAID bus controller: HighPoint Technologies, Inc. HPT374 (rev
07)
        Subsystem: HighPoint Technologies, Inc. Unknown device 0001
        Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 28
        I/O ports at 9800 [size=8]
        I/O ports at 9400 [size=4]
        I/O ports at 9000 [size=8]
        I/O ports at 8800 [size=4]
        I/O ports at 8400 [size=256]
        Capabilities: [60] Power Management version 2
Signed-off-by: NMasoud Sharbiani <masouds@google.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
[bart: use dev_get_drvdata() per Sergei's suggestion]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Make ia64 refrain from clearing a given to-be-offlined CPU's bit in the
cpu_online_mask until it has processed pending irqs.  This change
prevents other CPUs from being blindsided by an apparently offline CPU
nevertheless changing globally visible state.  Also remove the existing
redundant cpu_clear(cpu, cpu_online_map).
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Error handling code following a kmalloc should free the allocated data.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NTony Luck <tony.luck@intel.com>

bte.h expects a #define of L1_CACHE_MASK which is currently only
in bte.c.  This small patch gets bte.h to include cleanly and makes
BTE_UNALIGNED_COPY not report errors.
Signed-off-by: NRobin Holt <holt@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Broke the non modular builds by moving an essential function into
modules.c.  Fix this by moving it out again and into asm/sections.h as
an inline.  To do this, the definitions of struct fdesc and struct
got_val have been lifted out of modules.c and put in asm/elf.h where
they belong.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

ocfs2 will become read-only if we try to read the bytes which pass
the end of i_size. This can be easily reproduced by following steps:
1. mkfs a ocfs2 volume with bs=4k cs=4k and nosparse.
2. create a small file(say less than 100 bytes) and we will create the file
   which is allocated 1 cluster.
3. read 8196 bytes from the kernel using O_DIRECT which exceeds the limit.
4. The ocfs2 volume becomes read-only and dmesg shows:
OCFS2: ERROR (device sda13): ocfs2_direct_IO_get_blocks:
Inode 66010 has a hole at block 1
File system is now read-only due to the potential of on-disk corruption.
Please run fsck.ocfs2 once the file system is unmounted.

So suppress the ERROR message.
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NMark Fasheh <mfasheh@suse.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ipv6: Fix OOPS in ip6_dst_lookup_tail().
  ipsec: Restore larval states and socket policies in dump
  [Bluetooth] Reject L2CAP connections on an insecure ACL link
  [Bluetooth] Enforce correct authentication requirements
  [Bluetooth] Fix reference counting during ACL config stage

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Disable timer interrupts in fixup_irqs().

This fixes kernel bugzilla 11469: "TUN with 1024 neighbours:
ip6_dst_lookup_tail NULL crash"

dst->neighbour is not necessarily hooked up at this point
in the processing path, so blindly dereferencing it is
the wrong thing to do.  This NULL check exists in other
similar paths and this case was just an oversight.

Also fix the completely wrong and confusing indentation
here while we're at it.

Based upon a patch by Evgeniy Polyakov.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clockevents: remove WARN_ON which was used to gather information

The issue of the endless reprogramming loop due to a too small
min_delta_ns was fixed with the previous updates of the clock events
code, but we had no information about the spread of this problem. I
added a WARN_ON to get automated information via kerneloops.org and to
get some direct reports, which allowed me to analyse the affected
machines.

The WARN_ON has served its purpose and would be annoying for a release
kernel. Remove it and just keep the information about the increase of
the min_delta_ns value.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix memmap=exactmap boot argument
  x86: disable static NOPLs on 32 bits
  xen: fix 2.6.27-rc5 xen balloon driver warnings

When using kdump modifying the e820 map is yielding strange results.

For example starting with

 BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000100 - 0000000000093400 (usable)
 BIOS-e820: 0000000000093400 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
 BIOS-e820: 000000003fee0000 - 000000003fef3000 (ACPI data)
 BIOS-e820: 000000003fef3000 - 000000003ff80000 (ACPI NVS)
 BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)

and booting with args

memmap=exactmap memmap=640K@0K memmap=5228K@16384K memmap=125188K@22252K memmap=76K#1047424K memmap=564K#1047500K

resulted in:

 user-defined physical RAM map:
 user: 0000000000000000 - 0000000000093400 (usable)
 user: 0000000000093400 - 00000000000a0000 (reserved)
 user: 0000000000100000 - 000000003fee0000 (usable)
 user: 000000003fee0000 - 000000003fef3000 (ACPI data)
 user: 000000003fef3000 - 000000003ff80000 (ACPI NVS)
 user: 000000003ff80000 - 0000000040000000 (reserved)
 user: 00000000e0000000 - 00000000f0000000 (reserved)
 user: 00000000fec00000 - 00000000fec10000 (reserved)
 user: 00000000fee00000 - 00000000fee01000 (reserved)
 user: 00000000ff000000 - 0000000100000000 (reserved)

But should have resulted in:

 user-defined physical RAM map:
 user: 0000000000000000 - 00000000000a0000 (usable)
 user: 0000000001000000 - 000000000151b000 (usable)
 user: 00000000015bb000 - 0000000008ffc000 (usable)
 user: 000000003fee0000 - 000000003ff80000 (ACPI data)

This is happening because of an improper usage of strcmp() in the
e820 parsing code.  The strcmp() always returns !0 and never resets the
value for e820.nr_map and returns an incorrect user-defined map.

This patch fixes the problem.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] cio: allow offline processing for disconnected devices
  [S390] cio: handle ssch() return codes correctly.
  [S390] cio: Correct cleanup on error.
  [S390] CVE-2008-1514: prevent ptrace padding area read/write in 31-bit mode

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] IP22: Fix detection of second HPC3 on Challenge S

* 'linux-next' of git://git.infradead.org/~dedekind/ubifs-2.6:
  UBIFS: make minimum fanout 3
  UBIFS: fix division by zero
  UBIFS: amend f_fsid
  UBIFS: fill f_fsid
  UBIFS: improve statfs reporting even more
  UBIFS: introduce LEB overhead
  UBIFS: add forgotten gc_idx_lebs component
  UBIFS: fix assertion
  UBIFS: improve statfs reporting
  UBIFS: remove incorrect index space check
  UBIFS: push empty flash hack down
  UBIFS: do not update min_idx_lebs in stafs
  UBIFS: allow for racing between GC and TNC
  UBIFS: always read hashed-key nodes under TNC mutex
  UBIFS: fix zero-length truncations

It was introduced by "vsprintf: add support for '%pS' and '%pF' pointer
formats" in commit 0fe1ef24.  However,
the current way its coded doesn't work on parisc64.  For two reasons: 1)
parisc isn't in the #ifdef and 2) parisc has a different format for
function descriptors

Make dereference_function_descriptor() more accommodating by allowing
architecture overrides.  I put the three overrides (for parisc64, ppc64
and ia64) in arch/kernel/module.c because that's where the kernel
internal linker which knows how to deal with function descriptors sits.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NTony Luck <tony.luck@intel.com>
Acked-by: NKyle McMartin <kyle@mcmartin.ca>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Jie Yang at Atheros is getting more directly involved with upstream work
on the atl* drivers.  This patch changes the ATL1 entry to ATLX (atl2
support posted to netdev today) and adds him as a maintainer.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the 2.6.27 circle ->fasync lost the BKL, and the last remaining
->open variant that takes the BKL is also gone.  ->get_sb and ->kill_sb
didn't have BKL forever, so updated the entries while we're at that.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The commit commit 4c563f76 ("[XFRM]:
Speed up xfrm_policy and xfrm_state walking") inadvertently removed
larval states and socket policies from netlink dumps.  This patch
restores them.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When disconnected ccw devices are removed, the device has to be set
offline, otherwise there will be side effects including a reference
count imbalance. This patch modifies ccw_device_offline to work for
devices in disconnecte/not operational state. ccw_device_offline is
called by cio for devices which are online during device removal.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

ssch() has two classes of return codes:
- condition codes (0-3) which need to be translated to Linux
  error codes
- Linux error codes (-EIO on exceptions) which should be passed
  to the caller (instead of erronously being handled like
  condition code 3)
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>