to #28736503

commit 0018784fc84f636d473a0d2a65a34f9d01893c0a upstream

This is a prepatory patch to allow io_uring to invoke statx directly.
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 1d9e1288039a47dc1189c3c1fed5cf3c215e94b7 upstream

Separate statx data from open in io_kiocb. No functional changes.
Signed-off-by: NBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 0bf0eefdab52d9f9f3a1eeda32a4fc7afe4e9219 upstream

io_close() was punting async manually to skip grabbing files. Use
REQ_F_NO_FILE_TABLE instead, and pass it through the generic path
with -EAGAIN.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 0451894522108d6c72934aff6ef89023743a9ed4 upstream

io_commit_cqring() assembly doesn't look good with extra code handling
drained requests. IOSQE_IO_DRAIN is slow and discouraged to be used in
a hot path, so try to minimise its impact by putting it into a helper
and doing a fast check.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 56080b02ed6e71fbc0add2d05a32ed7361dd736a upstream

SQEs are user writable, don't read sqe->off twice in io_timeout_prep()
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 733f5c95e6fdabd05b8dfc15e04512809c9652c2 upstream

Move spin_lock_irq() earlier to have only 1 call site of it in
io_timeout(). It makes the flow easier.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 4518a3cc273cf82efdd36522fb1f13baad173c70 upstream

In io_uring_cancel_files(), after refcount_sub_and_test() leaves 0
req->refs, it calls io_put_req(), which would also put a ref. Call
io_free_req() instead.

Cc: stable@vger.kernel.org
Fixes: 2ca10259b418 ("io_uring: prune request from overflow list on flush")
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 6b668c9b7fc6fc0c313cdaee8b75d17f4d954ab5 upstream

When IORING_SETUP_SQPOLL is enabled, io_ring_ctx_wait_and_kill() will wait
for sq thread to idle by busy loop:

    while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
        cond_resched();

Above loop isn't very CPU friendly, it may introduce a short cpu burst on
the current cpu.

If ctx->refs is dying, we forbid sq_thread from submitting any further
SQEs. Instead they just get discarded when we exit.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 0cdaf760f42eb8e8a714c1cc017423e5da6d4936 upstream

A submission is "async" IIF it's done by SQPOLL thread. Instead of
passing @async flag into io_submit_sqes(), deduce it from ctx->flags.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit f2a8d5c7a218b9c24befb756c4eb30aa550ce822 upstream

Add IORING_OP_TEE implementing tee(2) support. Almost identical to
splice bits, but without offsets.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 9dafdfc2f0a3ae551711098de3d7b621a469f11a upstream

export do_tee() for use in io_uring
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit c11368a57be460de889696f6ff8815fbcacf4db2 upstream

req->flags stores all sqe->flags. After checking that sqe->flags are
valid set if IOSQE* flags, no need to double check it, just forward them
all.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 9f13c35b33fddb186beab9ef21c555a01e45f4d7 upstream

io_file_put() deals with flushing state's file refs, adding "state" to
its name makes it a bit clearer. Also, avoid double check of
state->file in __io_file_get() in some cases.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 3bfa5bcb26f0b52d7ae8416aa0618fff21aceaaf upstream

We only need apoll in the one section, do the juggling with the work
restoration there. This removes a special case further down as well.

No functional changes in this patch.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

to #28736503

commit 7d01bd745a8f52ff2883f661235139ab6e7d23e6 upstream

The "struct io_submit_state *state" parameter is not used, remove it.
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NXiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

[ Upstream commit 862f35c94730c9270833f3ad05bd758a29f204ed ]

If we just set the mirror count to 1 without first clearing out
the mirrors, we can leak queued up requests.
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

[ Upstream commit 8605cf0e852af3b2c771c18417499dc4ceed03d5 ]

When dreq is allocated by nfs_direct_req_alloc(), dreq->kref is
initialized to 2. Therefore we need to call nfs_direct_req_release()
twice to release the allocated dreq. Usually it is called in
nfs_file_direct_{read, write}() and nfs_direct_complete().

However, current code only calls nfs_direct_req_relese() once if
nfs_get_lock_context() fails in nfs_file_direct_{read, write}().
So, that case would result in memory leak.

Fix this by adding the missing call.
Signed-off-by: NMisono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

commit add42de31721fa29ed77a7ce388674d69f9d31a4 upstream.

When we detach a subrequest from the list, we must also release the
reference it holds to the parent.

Fixes: 5b2b5187 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

[ Upstream commit 55dee1bc0d72877b99805e42e0205087e98b9edd ]

An NFS client that mounts multiple exports from the same NFS
server with higher NFSv4 versions disabled (i.e. 4.2) and without
forcing a specific NFS version results in fscache index cookie
collisions and the following messages:
[  570.004348] FS-Cache: Duplicate cookie detected

Each nfs_client structure should have its own fscache index cookie,
so add the minorversion to nfs_server_key.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200145Signed-off-by: NScott Mayhew <smayhew@redhat.com>
Signed-off-by: NDave Wysochanski <dwysocha@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

[ Upstream commit 123c23c6a7b7ecd2a3d6060bea1d94019f71fd66 ]

In _nfs42_proc_copy(), 'res->commit_res.verf' is allocated through
kzalloc() if 'args->sync' is true. In the following code, if
'res->synchronous' is false, handle_async_copy() will be invoked. If an
error occurs during the invocation, the following code will not be executed
and the error will be returned . However, the allocated
'res->commit_res.verf' is not deallocated, leading to a memory leak. This
is also true if the invocation of process_copy_commit() returns an error.

To fix the above leaks, redirect the execution to the 'out' label if an
error is encountered.
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

commit 221203ce6406273cf00e5c6397257d986c003ee6 upstream.

Instead of making assumptions about the commit verifier contents, change
the commit code to ensure we always check that the verifier was set
by the XDR code.

Fixes: f54bcf2e ("pnfs: Prepare for flexfiles by pulling out common code")
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

commit 0df68ced55443243951d02cc497be31fadf28173 upstream.

If we suffer a fatal error upon writing a file, which causes us to
need to revalidate the entire mapping, then we should also revalidate
the file size.

Fixes: d2ceb7e57086 ("NFS: Don't use page_file_mapping after removing the page")
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

commit 114de38225d9b300f027e2aec9afbb6e0def154b upstream.

When a NFS directory page cache page is removed from the page cache,
its contents are freed through a call to nfs_readdir_clear_array().
To prevent the removal of the page cache entry until after we've
finished reading it, we must take the page lock.

Fixes: 11de3b11 ("NFS: Fix a memory leak in nfs_readdir")
Cc: stable@vger.kernel.org # v2.6.37+
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

commit 4b310319c6a8ce708f1033d57145e2aa027a883c upstream.

nfs_readdir_xdr_to_array() must not exit without having initialised
the array, so that the page cache deletion routines can safely
call nfs_readdir_clear_array().
Furthermore, we should ensure that if we exit nfs_readdir_filler()
with an error, we free up any page contents to prevent a leak
if we try to fill the page again.

Fixes: 11de3b11 ("NFS: Fix a memory leak in nfs_readdir")
Cc: stable@vger.kernel.org # v2.6.37+
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

[ Upstream commit 108bb4afd351d65826648a47f11fa3104e250d9b ]

If the attempt to instantiate the mirror's layout DS pointer failed,
then that pointer may hold a value of type ERR_PTR(), so we need
to check that before we dereference it.

Fixes: 65990d1a ("pNFS/flexfiles: Fix a deadlock on LAYOUTGET")
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

[ Upstream commit 1a3466aed3a17eed41cd9411f89eb637f58349b0 ]

These really should have been there from the beginning, but we never
noticed because there was enough slack in the RPC request for the extra
bytes. Chuck's recent patch to use au_cslack and au_rslack to compute
buffer size shrunk the buffer enough that this was now a problem for
SEEK operations on my test client.

Fixes: f4ac1674 ("nfs: Add ALLOCATE support")
Fixes: 2e72448b ("NFS: Add COPY nfs operation")
Fixes: cb95deea ("NFS OFFLOAD_CANCEL xdr")
Fixes: 624bd5b7 ("nfs: Add DEALLOCATE support")
Fixes: 1c6dcbe5 ("NFS: Implement SEEK")
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

[ Upstream commit 5085607d209102b37b169bc94d0aa39566a9842a ]

If a bulk layout recall or a metadata server reboot coincides with a
umount, then holding a reference to an inode is unsafe unless we
also hold a reference to the super block.

Fixes: fd9a8d71 ("NFSv4.1: Fix bulk recall and destroy of layouts")
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

[ Upstream commit 6f9449be53f3ce383caed797708b332ede8d952c ]

Fix a soft lockup when NFS client delegation recovery is attempted
but the inode is in the process of being freed. When the
igrab(inode) call fails, and we have to restart the recovery process,
we need to ensure that we won't attempt to recover the same delegation
again.

Fixes: 45870d69 ("NFSv4.1: Test delegation stateids when server...")
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

commit 5326de9e94bedcf7366e7e7625d4deb8c1f1ca8a upstream.

If nfs4_delegreturn_prepare needs to wait for a layoutreturn to complete
then make sure we drop the sequence slot if we hold it.

Fixes: 1c5bd76d ("pNFS: Enable layoutreturn operation for return-on-close")
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557789

commit ad97a995d8edff820d4238bd0dfc69f440031ae6 upstream.

Encode the mtime correctly.

Fixes: 95582b00 ("vfs: change inode times to use struct timespec64")
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557760

[ Upstream commit c142932c29e533ee892f87b44d8abc5719edceec ]

In the reflink extent remap function, it turns out that uirec (the block
mapping corresponding only to the part of the passed-in mapping that got
unmapped) was not fully initialized.  Specifically, br_state was not
being copied from the passed-in struct to the uirec.  This could lead to
unpredictable results such as the reflinked mapping being marked
unwritten in the destination file.
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557760

commit 10a98cb16d80be3595fdb165fad898bb28b8b6d2 upstream.

Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set
during do_exit().  That can confuse things.  In particular, if BSD
process accounting is enabled, then do_exit() writes data to an
accounting file.  If that file has FS_SYNC_FL set, then this write
occurs synchronously and can misbehave if PF_MEMALLOC is set.

For example, if the accounting file is located on an XFS filesystem,
then a WARN_ON_ONCE() in iomap_do_writepage() is triggered and the data
doesn't get written when it should.  Or if the accounting file is
located on an ext4 filesystem without a journal, then a WARN_ON_ONCE()
in ext4_write_inode() is triggered and the inode doesn't get written.

Fix this in xfsaild() by using the helper functions to save and restore
PF_MEMALLOC.

This can be reproduced as follows in the kvm-xfstests test appliance
modified to add the 'acct' Debian package, and with kvm-xfstests's
recommended kconfig modified to add CONFIG_BSD_PROCESS_ACCT=y:

        mkfs.xfs -f /dev/vdb
        mount /vdb
        touch /vdb/file
        chattr +S /vdb/file
        accton /vdb/file
        mkfs.xfs -f /dev/vdc
        mount /vdc
        umount /vdc

It causes:
	WARNING: CPU: 1 PID: 336 at fs/iomap/buffered-io.c:1534
	CPU: 1 PID: 336 Comm: xfsaild/vdc Not tainted 5.6.0-rc5 #3
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
	RIP: 0010:iomap_do_writepage+0x16b/0x1f0 fs/iomap/buffered-io.c:1534
	[...]
	Call Trace:
	 write_cache_pages+0x189/0x4d0 mm/page-writeback.c:2238
	 iomap_writepages+0x1c/0x33 fs/iomap/buffered-io.c:1642
	 xfs_vm_writepages+0x65/0x90 fs/xfs/xfs_aops.c:578
	 do_writepages+0x41/0xe0 mm/page-writeback.c:2344
	 __filemap_fdatawrite_range+0xd2/0x120 mm/filemap.c:421
	 file_write_and_wait_range+0x71/0xc0 mm/filemap.c:760
	 xfs_file_fsync+0x7a/0x2b0 fs/xfs/xfs_file.c:114
	 generic_write_sync include/linux/fs.h:2867 [inline]
	 xfs_file_buffered_aio_write+0x379/0x3b0 fs/xfs/xfs_file.c:691
	 call_write_iter include/linux/fs.h:1901 [inline]
	 new_sync_write+0x130/0x1d0 fs/read_write.c:483
	 __kernel_write+0x54/0xe0 fs/read_write.c:515
	 do_acct_process+0x122/0x170 kernel/acct.c:522
	 slow_acct_process kernel/acct.c:581 [inline]
	 acct_process+0x1d4/0x27c kernel/acct.c:607
	 do_exit+0x83d/0xbc0 kernel/exit.c:791
	 kthread+0xf1/0x140 kernel/kthread.c:257
	 ret_from_fork+0x27/0x50 arch/x86/entry/entry_64.S:352

This bug was originally reported by syzbot at
https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com.

Reported-by: syzbot+1f9dc49e8de2582d90c2@syzkaller.appspotmail.com
Signed-off-by: NEric Biggers <ebiggers@google.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557760

commit 4b674b9ac852937af1f8c62f730c325fb6eadcdb upstream.

The filesystem freeze sequence in XFS waits on any background
eofblocks or cowblocks scans to complete before the filesystem is
quiesced. At this point, the freezer has already stopped the
transaction subsystem, however, which means a truncate or cowblock
cancellation in progress is likely blocked in transaction
allocation. This results in a deadlock between freeze and the
associated scanner.

Fix this problem by holding superblock write protection across calls
into the block reapers. Since protection for background scans is
acquired from the workqueue task context, trylock to avoid a similar
deadlock between freeze and blocking on the write lock.

Fixes: d6b636eb ("xfs: halt auto-reclamation activities while rebuilding rmap")
Reported-by: NPaul Furtado <paulfurtado91@gmail.com>
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAllison Collins <allison.henderson@oracle.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557760

commit bc56ad8c74b8588685c2875de0df8ab6974828ef upstream.

When performing rename operation with RENAME_WHITEOUT flag, we will
hold AGF lock to allocate or free extents in manipulating the dirents
firstly, and then doing the xfs_iunlink_remove() call last to hold
AGI lock to modify the tmpfile info, so we the lock order AGI->AGF.

The big problem here is that we have an ordering constraint on AGF
and AGI locking - inode allocation locks the AGI, then can allocate
a new extent for new inodes, locking the AGF after the AGI. Hence
the ordering that is imposed by other parts of the code is AGI before
AGF. So we get an ABBA deadlock between the AGI and AGF here.

Process A:
Call trace:
 ? __schedule+0x2bd/0x620
 schedule+0x33/0x90
 schedule_timeout+0x17d/0x290
 __down_common+0xef/0x125
 ? xfs_buf_find+0x215/0x6c0 [xfs]
 down+0x3b/0x50
 xfs_buf_lock+0x34/0xf0 [xfs]
 xfs_buf_find+0x215/0x6c0 [xfs]
 xfs_buf_get_map+0x37/0x230 [xfs]
 xfs_buf_read_map+0x29/0x190 [xfs]
 xfs_trans_read_buf_map+0x13d/0x520 [xfs]
 xfs_read_agf+0xa6/0x180 [xfs]
 ? schedule_timeout+0x17d/0x290
 xfs_alloc_read_agf+0x52/0x1f0 [xfs]
 xfs_alloc_fix_freelist+0x432/0x590 [xfs]
 ? down+0x3b/0x50
 ? xfs_buf_lock+0x34/0xf0 [xfs]
 ? xfs_buf_find+0x215/0x6c0 [xfs]
 xfs_alloc_vextent+0x301/0x6c0 [xfs]
 xfs_ialloc_ag_alloc+0x182/0x700 [xfs]
 ? _xfs_trans_bjoin+0x72/0xf0 [xfs]
 xfs_dialloc+0x116/0x290 [xfs]
 xfs_ialloc+0x6d/0x5e0 [xfs]
 ? xfs_log_reserve+0x165/0x280 [xfs]
 xfs_dir_ialloc+0x8c/0x240 [xfs]
 xfs_create+0x35a/0x610 [xfs]
 xfs_generic_create+0x1f1/0x2f0 [xfs]
 ...

Process B:
Call trace:
 ? __schedule+0x2bd/0x620
 ? xfs_bmapi_allocate+0x245/0x380 [xfs]
 schedule+0x33/0x90
 schedule_timeout+0x17d/0x290
 ? xfs_buf_find+0x1fd/0x6c0 [xfs]
 __down_common+0xef/0x125
 ? xfs_buf_get_map+0x37/0x230 [xfs]
 ? xfs_buf_find+0x215/0x6c0 [xfs]
 down+0x3b/0x50
 xfs_buf_lock+0x34/0xf0 [xfs]
 xfs_buf_find+0x215/0x6c0 [xfs]
 xfs_buf_get_map+0x37/0x230 [xfs]
 xfs_buf_read_map+0x29/0x190 [xfs]
 xfs_trans_read_buf_map+0x13d/0x520 [xfs]
 xfs_read_agi+0xa8/0x160 [xfs]
 xfs_iunlink_remove+0x6f/0x2a0 [xfs]
 ? current_time+0x46/0x80
 ? xfs_trans_ichgtime+0x39/0xb0 [xfs]
 xfs_rename+0x57a/0xae0 [xfs]
 xfs_vn_rename+0xe4/0x150 [xfs]
 ...

In this patch we move the xfs_iunlink_remove() call to
before acquiring the AGF lock to preserve correct AGI/AGF locking
order.

[Minor massage required due to upstream change making xfs_bumplink() a
void function where as in the 4.19.y tree the return value is checked,
even though it is always zero. Only change was to the last code block
removed by the patch. Functionally equivalent to upstream.]
Signed-off-by: Nkaixuxia <kaixuxia@tencent.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NSuraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557760

[ Upstream commit 5d1116d4c6af3e580f1ed0382ca5a94bd65a34cf ]

Christoph Hellwig complained about the following soft lockup warning
when running scrub after generic/175 when preemption is disabled and
slub debugging is enabled:

watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [xfs_scrub:161]
Modules linked in:
irq event stamp: 41692326
hardirqs last  enabled at (41692325): [<ffffffff8232c3b7>] _raw_0
hardirqs last disabled at (41692326): [<ffffffff81001c5a>] trace0
softirqs last  enabled at (41684994): [<ffffffff8260031f>] __do_e
softirqs last disabled at (41684987): [<ffffffff81127d8c>] irq_e0
CPU: 3 PID: 16189 Comm: xfs_scrub Not tainted 5.4.0-rc3+ #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.124
RIP: 0010:_raw_spin_unlock_irqrestore+0x39/0x40
Code: 89 f3 be 01 00 00 00 e8 d5 3a e5 fe 48 89 ef e8 ed 87 e5 f2
RSP: 0018:ffffc9000233f970 EFLAGS: 00000286 ORIG_RAX: ffffffffff3
RAX: ffff88813b398040 RBX: 0000000000000286 RCX: 0000000000000006
RDX: 0000000000000006 RSI: ffff88813b3988c0 RDI: ffff88813b398040
RBP: ffff888137958640 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffea00042b0c00
R13: 0000000000000001 R14: ffff88810ac32308 R15: ffff8881376fc040
FS:  00007f6113dea700(0000) GS:ffff88813bb80000(0000) knlGS:00000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6113de8ff8 CR3: 000000012f290000 CR4: 00000000000006e0
Call Trace:
 free_debug_processing+0x1dd/0x240
 __slab_free+0x231/0x410
 kmem_cache_free+0x30e/0x360
 xchk_ag_btcur_free+0x76/0xb0
 xchk_ag_free+0x10/0x80
 xchk_bmap_iextent_xref.isra.14+0xd9/0x120
 xchk_bmap_iextent+0x187/0x210
 xchk_bmap+0x2e0/0x3b0
 xfs_scrub_metadata+0x2e7/0x500
 xfs_ioc_scrub_metadata+0x4a/0xa0
 xfs_file_ioctl+0x58a/0xcd0
 do_vfs_ioctl+0xa0/0x6f0
 ksys_ioctl+0x5b/0x90
 __x64_sys_ioctl+0x11/0x20
 do_syscall_64+0x4b/0x1a0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

If preemption is disabled, all metadata buffers needed to perform the
scrub are already in memory, and there are a lot of records to check,
it's possible that the scrub thread will run for an extended period of
time without sleeping for IO or any other reason.  Then the watchdog
timer or the RCU stall timeout can trigger, producing the backtrace
above.

To fix this problem, call cond_resched() from the scrub thread so that
we back out to the scheduler whenever necessary.
Reported-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557760

commit 69ffe5960df16938bccfe1b65382af0b3de51265 upstream.

Commit 5b094d6d ("xfs: fix multi-AG deadlock in xfs_bunmapi") added
a check in __xfs_bunmapi() to stop early if we would touch multiple AGs
in the wrong order. However, this check isn't applicable for realtime
files. In most cases, it just makes us do unnecessary commits. However,
without the fix from the previous commit ("xfs: fix realtime file data
space leak"), if the last and second-to-last extents also happen to have
different "AG numbers", then the break actually causes __xfs_bunmapi()
to return without making any progress, which sends
xfs_itruncate_extents_flags() into an infinite loop.

Fixes: 5b094d6d ("xfs: fix multi-AG deadlock in xfs_bunmapi")
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557760

[ Upstream commit 798a9cada4694ca8d970259f216cec47e675bfd5 ]

syzbot (via KASAN) reports a use-after-free in the error path of
xlog_alloc_log(). Specifically, the iclog freeing loop doesn't
handle the case of a fully initialized ->l_iclog linked list.
Instead, it assumes that the list is partially constructed and NULL
terminated.

This bug manifested because there was no possible error scenario
after iclog list setup when the original code was added.  Subsequent
code and associated error conditions were added some time later,
while the original error handling code was never updated. Fix up the
error loop to terminate either on a NULL iclog or reaching the end
of the list.

Reported-by: syzbot+c732f8644185de340492@syzkaller.appspotmail.com
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557782

commit 300b124fcf6ad2cd99a7b721e0f096785e0a3134 upstream.

Commit 6dde1e42f497 ("ovl: make i_ino consistent with st_ino in more
cases"), relaxed the condition nfs_export=on in order to set the value of
i_ino to xino map of real ino.

Specifically, it also relaxed the pre-condition that index=on for
consistent i_ino. This opened the corner case of lower hardlink in
ovl_get_inode(), which calls ovl_fill_inode() with ino=0 and then
ovl_init_inode() is called to set i_ino to lower real ino without the xino
mapping.

Pass the correct values of ino;fsid in this case to ovl_fill_inode(), so it
can initialize i_ino correctly.

Fixes: 6dde1e42f497 ("ovl: make i_ino consistent with st_ino in more ...")
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557782

[ Upstream commit a4ac9d45c0cd14a2adc872186431c79804b77dbf ]

ovl_lseek() is using ssize_t to return the value from vfs_llseek().  On a
32-bit kernel ssize_t is a 32-bit signed int, which overflows above 2 GB.

Assign the return value of vfs_llseek() to loff_t to fix this.
Reported-by: NBoris Gjenero <boris.gjenero@gmail.com>
Fixes: 9e46b840c705 ("ovl: support stacked SEEK_HOLE/SEEK_DATA")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>

task #28557737

[ Upstream commit 6c5d911249290f41f7b50b43344a7520605b1acb ]

journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,

 LTP: starting fsync04
 /dev/zero: Can't open blockdev
 EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
 ==================================================================
 BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]

 write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
  __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
  __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
  jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
  (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
  kjournald2+0x13b/0x450 [jbd2]
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
  jbd2_write_access_granted+0x1b2/0x250 [jbd2]
  jbd2_write_access_granted at fs/jbd2/transaction.c:1155
  jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
  __ext4_journal_get_write_access+0x50/0x90 [ext4]
  ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
  ext4_mb_new_blocks+0x54f/0xca0 [ext4]
  ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
  ext4_map_blocks+0x3b4/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block+0x3b/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 5 locks held by fsync04/25724:
  #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
  #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
  #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
  #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
 irq event stamp: 1407125
 hardirqs last  enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NQian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pwSigned-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NJeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>