This adds ACPI support for APM X-Gene RNG unit.
Signed-off-by: NFeng Kan <fkan@apm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix rng_unmap_ctx's DMA_UNMAP size problem for caam_rng, else system would
report the below calltrace during cleanup caam_rng.
Since rng_create_sh_desc() creates a fixed descriptor of exactly 4
command-lengths now, also update DESC_RNG_LEN to (4 * CAAM_CMD_SZ).

caam_jr ffe301000.jr: DMA-API: device driver frees DMA memory with different size [device address=0x000000007f080010] [map size=16 bytes] [unmap size=40 bytes]
------------[ cut here ]------------
WARNING: at lib/dma-debug.c:887
Modules linked in:
task: c0000000f7cdaa80 ti: c0000000e5340000 task.ti: c0000000e5340000
NIP: c0000000004f5bc8 LR: c0000000004f5bc4 CTR: c0000000005f69b0
REGS: c0000000e53433c0 TRAP: 0700   Not tainted
MSR: 0000000080029000 <CE,EE,ME>  CR: 24088482  XER: 00000000
SOFTE: 0

GPR00: c0000000004f5bc4 c0000000e5343640 c0000000012af360 000000000000009f
GPR04: 0000000000000000 00000000000000a0 c000000000d02070 c000000015980660
GPR08: c000000000cff360 0000000000000000 0000000000000000 c0000000012da018
GPR12: 00000000000001e3 c000000001fff780 00000000100f0000 0000000000000001
GPR16: 0000000000000002 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000001
GPR24: 0000000000000001 0000000000000001 0000000000000000 0000000000000001
GPR28: c000000001556b90 c000000001565b80 c0000000e5343750 c0000000f9427480
NIP [c0000000004f5bc8] .check_unmap+0x538/0x9c0
LR [c0000000004f5bc4] .check_unmap+0x534/0x9c0
Call Trace:
[c0000000e5343640] [c0000000004f5bc4] .check_unmap+0x534/0x9c0 (unreliable)
[c0000000e53436e0] [c0000000004f60d4] .debug_dma_unmap_page+0x84/0xb0
[c0000000e5343810] [c00000000082f9d4] .caam_cleanup+0x1d4/0x240
[c0000000e53438a0] [c00000000056cc88] .hwrng_unregister+0xd8/0x1c0
Instruction dump:
7c641b78 41de0410 e8a90050 2fa50000 419e0484 e8de0028 e8ff0030 3c62ff90
e91e0030 38638388 48546ed9 60000000 <0fe00000> 3c62ff8f 38637fc8 48546ec5
---[ end trace e43fd1734d6600df ]---
Signed-off-by: NYanjiang Jin <yanjiang.jin@windriver.com>
Acked-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

sec4_sg_bytes not being properly initialized causes ahash_done
to try to free unallocated DMA memory:

caam_jr ffe301000.jr: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0xdeadbeefdeadbeef] [size=3735928559 bytes]
------------[ cut here ]------------
WARNING: at lib/dma-debug.c:1093
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.0.0-rc1+ #6
task: e9598c00 ti: effca000 task.ti: e95a2000
NIP: c04ef24c LR: c04ef24c CTR: c0549730
REGS: effcbd40 TRAP: 0700   Not tainted  (4.0.0-rc1+)
MSR: 00029002 <CE,EE,ME>  CR: 22008084  XER: 20000000

GPR00: c04ef24c effcbdf0 e9598c00 00000096 c08f7424 c00ab2b0 00000000 00000001
GPR08: c0fe7510 effca000 00000000 000001c3 22008082 00000000 c1048e77 c1050000
GPR16: c0c36700 493c0040 0000002c e690e4a0 c1054fb4 c18bac40 00029002 c18b0788
GPR24: 00000014 e690e480 effcbe48 00000000 c0fde128 e6ffac10 deadbeef deadbeef
NIP [c04ef24c] check_unmap+0x93c/0xb40
LR [c04ef24c] check_unmap+0x93c/0xb40
Call Trace:
[effcbdf0] [c04ef24c] check_unmap+0x93c/0xb40 (unreliable)
[effcbe40] [c04ef4f4] debug_dma_unmap_page+0xa4/0xc0
[effcbec0] [c070cda8] ahash_done+0x128/0x1a0
[effcbef0] [c0700070] caam_jr_dequeue+0x1d0/0x290
[effcbf40] [c0045f40] tasklet_action+0x110/0x1f0
[effcbf80] [c0044bc8] __do_softirq+0x188/0x700
[effcbfe0] [c00455d8] irq_exit+0x108/0x120
[effcbff0] [c000f520] call_do_irq+0x24/0x3c
[e95a3e20] [c00059b8] do_IRQ+0xc8/0x170
[e95a3e50] [c0011bc8] ret_from_except+0x0/0x18
Signed-off-by: NYanjiang Jin <yanjiang.jin@windriver.com>
Acked-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This adds a driver for random number generator present on Broadcom
IPROC devices.
Reviewed-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NScott Branden <sbranden@broadcom.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7e933d3b ("crypto: ux500: use dmaengine_prep_slave_sg
API") changed the code to use the new API, but forgot to update an error
message.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This is properly defined in the md5 header file.
Signed-off-by: NMartin Hicks <mort@bork.org>
Acked-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

There were multiple loops in a row, for each separate step of the
initialization of the channels.  Simplify to a single loop.
Signed-off-by: NMartin Hicks <mort@bork.org>
Acked-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix typo, "intialization" -> "initialization"
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Simplify the driver's probe function and error handling by using the
device managed allocators, while at it, drop the redundant "out of
memory" messages since these are already printed by the allocator.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h contains the register
definitions for this random number generator block, incorporate these
register definitions directly into the bcm63xx-rng driver so we do not
rely on this header to be provided.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

bcm_{readl,writel} macros expand to __raw_{readl,writel}, use these
directly such that we do not rely on the platform to provide these for
us. As a result, we no longer use bcm63xx_io.h, so remove that inclusion
too.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

All possible code-paths will assign ret to suitable values so this
default value is not needed.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

A failure of sahara_hw_descriptor_create() with -EINVAL due to scatter list
out of bounds/invalid would not be reported back. This patch just passes on
the -EINVAL so it is visible in sahara_queue_manage().
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

return type of wait_for_completion_timeout is unsigned long not int, this
patch adds appropriate variables of type unsigned long.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

return type of wait_for_completion_timeout is unsigned long not int, this
patch changes the type of ret from int to unsigned long.
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch enables VMX module in PPC64.
Signed-off-by: NLeonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

OpenSSL implements optimized ASM algorithms which support
VMX instructions on Power 8 CPU.

These scripts generate an endian-agnostic ASM implementation
in order to support both big and little-endian.
	- aesp8-ppc.pl: implements suport for AES instructions
	implemented by POWER8 processor.
	- ghashp8-ppc.pl: implements support for  GHASH for Power8.
	- ppc-xlate.pl:  ppc assembler distiller.

These code has been adopted from OpenSSL project in collaboration
with the original author (Andy Polyakov <appro@openssl.org>).
Signed-off-by: NLeonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds GHASH routines to VMX module in order to
make use of VMX cryptographic acceleration instructions
on Power 8 CPU.
Signed-off-by: NLeonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds AES CTR routines to VMX module in order to
make use of VMX cryptographic acceleration instructions
on Power 8 CPU.
Signed-off-by: NLeonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds AES CBC routines to VMX module in order to
make use of VMX cryptographic acceleration instructions
on Power 8 CPU.
Signed-off-by: NLeonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds AES routines to VMX module in order to
make use of VMX cryptographic acceleration instructions
on Power 8 CPU.
Signed-off-by: NLeonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds routines supporting VMX instructions on the
Power 8.
Signed-off-by: NLeonidas S. Barbosa <leosilva@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for ACPI to the CCP platform driver.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Where applicable, convert calls to their devm_ counterparts, e.g. kzalloc
to devm_kzalloc.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Replace the setting of the DMA masks with the dma_set_mask_and_coherent
function call.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add HAS_IOMEM as a Kconfig dependency. Always include ccp-platform.c
in the CCP build and conditionally include ccp-pci.c.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Changes to address warnings and errors reported by the checkpatch
script.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Upstream checkpatch now requires this.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

For, !HAVE_CLK the clk API returns a NULL cookie. Rework the
initialization code to handle that. If clk_get_rate() delivers 0, we use
the fallback mechanisms. The patch is pretty easy when ignoring white
space issues (git diff -b).
Suggested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Tested-by: NMax Filippov <jcmvbkbc@gmail.com>

The exynos_tmu_data() function should on entrance test not only for valid
data pointer, but also for data->tmu_read one.
It is important, since afterwards it is dereferenced to get temperature code.
Signed-off-by: NLukasz Majewski <l.majewski@samsung.com>
Tested-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

Code that does this:

	if (!(d_unhashed(tmp) && tmp->d_inode)) {
		...
		simple_unlink(parent->d_inode, tmp);
	}

is broken because:

	!(d_unhashed(tmp) && tmp->d_inode)

is equivalent to:

	!d_unhashed(tmp) || !tmp->d_inode

so it is possible to get into simple_unlink() with tmp->d_inode == NULL.

simple_unlink(), however, assumes tmp->d_inode cannot be NULL.

I think that what was meant is this:

	!d_unhashed(tmp) && tmp->d_inode

and that the logical-not operator or the final close-bracket was misplaced.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Bryan O'Sullivan <bos@pathscale.com>
cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We don't really need to recalculate the effective rate of a clock when a
per-user clock is removed, if the constraints of the later aren't
limiting the requested rate.

This was causing problems with clocks that never had a rate set before,
as rate_req would be zero. Though this could be considered a bug in the
implementation of those clocks, this should be checked somewhere else.

Fixes: 1c8e6004 ("clk: Add rate constraints to clocks")
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

From a locking point of view it is safe to check waiting_msg without
a lock, but there is a memory ordering issue that causes it to
possibly not be set right when viewed from another processor.  We are
already claiming a lock right after that, move the check to inside
the lock to enforce the memory ordering.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

The seq_printf like functions will soon be changed to return void.

Convert these uses to check seq_has_overflowed instead.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

Instead of manual calls of device_create_file() and
device_remove_file(), implement the condition in is_visible callback
for the attribute group and put these entries to the group, too.
This simplifies the code and avoids the possible races.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

This adds a loop through the elements in the linked list, recv_msgs using
list_for_entry_safe in order to free messages in this list.  In addition
we are using the safe version of this marco in order to prevent use after
bugs related to deleting the element we are on currently by holding a
pointer to the next element after the current one we are on and freeing
with the function, ipmi_free_recv_msg internally in this loop.
Signed-off-by: NNicholas Krause <xerofoify@gmail.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

A new harmless warning has come up on ARM builds with gcc-4.9:

drivers/char/ipmi/ipmi_msghandler.c: In function 'smi_send.isra.11':
include/linux/spinlock.h:372:95: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized]
  raw_spin_unlock_irqrestore(&lock->rlock, flags);
                                                                                               ^
drivers/char/ipmi/ipmi_msghandler.c:1490:16: note: 'flags' was declared here
  unsigned long flags;
                ^

This could be worked around by initializing the 'flags' variable, but it
seems better to rework the code to avoid this.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 7ea0ed2b ("ipmi: Make the message handler easier to use for SMI interfaces")
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

As part of the internal y2038 cleanup, this patch removes
timespec usage in the ipmi driver, replacing it timespec64

Cc: openipmi-developer@lists.sourceforge.net
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NCorey Minyard <minyard@mvista.com>

The driver uses #ifdef DEBUG_TIMING in order to conditionally print out
timestamped debug messages. Unfortunately it adds the ifdefs all over the
usage sites.

This patch cleans it up by adding a debug_timestamp() function which
is compiled out if DEBUG_TIMING isn't present. This cleans up all
the ugly ifdefs in the function logic.

Cc: openipmi-developer@lists.sourceforge.net
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NCorey Minyard <minyard@mvista.com>