- 17 5月, 2014 3 次提交
-
-
由 Phoebe Buckheister 提交于
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phoebe Buckheister 提交于
Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phoebe Buckheister 提交于
This patch adds containers and mutators for the major ieee802154_llsec structures to mac802154. Most of the (rather simple) ieee802154_llsec structs are wrapped only to provide an rcu_head for orderly disposal, but some structs - llsec keys notably - require more complex bookkeeping. Since each llsec key may be referenced by a number of llsec key table entries (with differing key ids, but the same actual key), we want to save memory and not allocate crypto transforms for each entry in the table. Thus, the mac802154 llsec key is reference-counted instead. Further, each key will have four associated crypto transforms - three CCM transforms for the authsizes 4/8/16 and one CTR transform for unauthenticated encryption. If we had a CCM* transform that allowed authsize 0, and authsize as part of requests instead of transforms, this would not be necessary. Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2014 2 次提交
-
-
由 Phoebe Buckheister 提交于
Commit 9b2777d6 (ieee802154: add TX power control to wpan_phy) and following erroneously added CSMA and CCA parameters for 802.15.4 devices as PHY parameters, while they are actually MAC parameters and can differ for any two WPAN instances. Since it is now sensible to have multiple WPAN devices with differing CSMA/CCA parameters, make these parameters MAC parameters instead. Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phoebe Buckheister 提交于
All 802.15.4 PHY devices with drivers in tree can support only one WPAN at any given time, yet the stack allows arbitrarily many WPAN devices to be created and up at the same time. This cannot work with what the hardware provides, and in the current implementation, provides an easy DoS vector to any process on the system that may call socket() and sendmsg(). Thus, allow only one WPAN per PHY to be up at once, just like mac80211 does for managed devices. Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2014 1 次提交
-
-
由 Phoebe Buckheister 提交于
Enable sparse warnings about endianness, replace the remaining fields regarding network operations without explicit endianness annotations with such that are annotated, and propagate this through the entire stack. Uses of ieee802154_addr_sa are not changed yet, this patch is only concerned with all other fields (such as address filters, operation parameters and the likes). Signed-off-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 4月, 2013 1 次提交
-
-
由 Chen Gang 提交于
Change MAC802154_CHAN_NONE from ~(u8)0 to 0xff, or the comparison in mac802154_wpan_xmit() for ``chan == MAC802154_CHAN_NONE'' will not succeed. This bug can be boiled down to ``u8 foo = 0xff; if (foo == ~(u8)0) [...] else [...]'' where the condition will always take the else branch. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 4月, 2013 1 次提交
-
-
由 Alan Ott 提交于
When ops->xmit() fails, drop the packet. Devices which support hardware ack and retry (which include all devices currently supported by mainline), will automatically retry sending the packet (in the hardware) up to 3 times, per the 802.15.4 spec. There is no need, and it is incorrect to try to do it in mac802154. Signed-off-by: NAlan Ott <alan@signal11.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2013 1 次提交
-
-
由 Tony Cheneau 提交于
Bring-over mac802154_dev_get_dsn() function that was present in the Linux ZigBee kernel. This function is called by the 6LoWPAN code in order to properly set the DSN (Data Sequence Number) value in the IEEE 802.15.4 frame. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 7月, 2012 1 次提交
-
-
Add method to get the device short 802.15.4 address. This call needed by ieee802154 layer to satisfy 'iz list' request from the user space. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2012 4 次提交
-
-
A new method to set page and channel values for a transceiver was added to the MIB. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
A method to assign the IEEE802.15.4 short address was added to the MIB implementation. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Two methods intended to get and set the Private Area Network identifier were added to the MIB implementation. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Every real 802.15.4 transceiver, which works with software MAC layer, can be classified as a wpan device in this stack. So the wpan device implementation provides missing link in datapath between the device drivers and the Linux network queue. According to the IEEE 802.15.4 standard each packet can be one of the following types: - beacon - MAC layer command - ACK - data This patch adds support for the data packet-type only, but this is enough to perform data transmission and receiving over radio. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2012 7 次提交
-
-
Support for monitor device intended to capture all the network activity. This interface could be used by networks sniffers and is already supported by WireShark. That's a good test point to check that basic MAC support works. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
This patch adds functionality for registration and removing slaves in the stack. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Basic support for IEEE 802.15.4 management information base. Current implementation contains a command to set HW address only. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Declare set of MAC-commands for reduced functionality interface. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Slaves represent typical network interfaces available from userspace. Each ieee802154 device/transceiver may have several slaves and able to be associated with several networks at the same time. So this patch adds structure for slaves declaration. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Main TX data path implementation between upper and physical layers. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
An interface to allocate and register ieee802154 compatible device. The allocated device has the following representation in memory: +-----------------------+ | struct wpan_phy | +-----------------------+ | struct mac802154_priv | +-----------------------+ | driver's private data | +-----------------------+ Used by device drivers to register new instance in the stack. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-