Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... rather than doing that in the guts of ->load_binary().
[updated to fix the bug spotted by Shentino - for SIGSEGV we really need
something stronger than send_sig_info(); again, better do that in one place]
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The NT flag doesn't do anything in long mode other than causing IRET
to #GP.  Oddly, CPL3 code can still set NT using popf.

Entry via hardware or software interrupt clears NT automatically, so
the only relevant entries are fast syscalls.

If user code causes kernel code to run with NT set, then there's at
least some (small) chance that it could cause trouble.  For example,
user code could cause a call to EFI code with NT set, and who knows
what would happen?  Apparently some games on Wine sometimes do
this (!), and, if an IRET return happens, they will segfault.  That
segfault cannot be handled, because signal delivery fails, too.

This patch programs the CPU to clear NT on entry via SYSCALL (both
32-bit and 64-bit, by my reading of the AMD APM), and it clears NT
in software on entry via SYSENTER.

To save a few cycles, this borrows a trick from Jan Beulich in Xen:
it checks whether NT is set before trying to clear it.  As a result,
it seems to have very little effect on SYSENTER performance on my
machine.

There's another minor bug fix in here: it looks like the CFI
annotations were wrong if CONFIG_AUDITSYSCALL=n.

Testers beware: on Xen, SYSENTER with NT set turns into a GPF.

I haven't touched anything on 32-bit kernels.

The syscall mask change comes from a variant of this patch by Anish
Bhatt.

Note to stable maintainers: there is no known security issue here.
A misguided program can set NT and cause the kernel to try and fail
to deliver SIGSEGV, crashing the program.  This patch fixes Far Cry
on Wine: https://bugs.winehq.org/show_bug.cgi?id=33275

Cc: <stable@vger.kernel.org>
Reported-by: NAnish Bhatt <anish@chelsio.com>
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/395749a5d39a29bd3e4b35899cf3a3c1340e5595.1412189265.git.luto@amacapital.netSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Since the arch is found locally in __audit_syscall_entry(), there is no need to
pass it in as a parameter.  Delete it from the parameter list.

x86* was the only arch to call __audit_syscall_entry() directly and did so from
assembly code.
Signed-off-by: NRichard Guy Briggs <rgb@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-audit@redhat.com
Signed-off-by: NEric Paris <eparis@redhat.com>

---

As this patch relies on changes in the audit tree, I think it
appropriate to send it through my tree rather than the x86 tree.

Currently, vdso.so files are prepared and analyzed by a combination
of objcopy, nm, some linker script tricks, and some simple ELF
parsers in the kernel.  Replace all of that with plain C code that
runs at build time.

All five vdso images now generate .c files that are compiled and
linked in to the kernel image.

This should cause only one userspace-visible change: the loaded vDSO
images are stripped more heavily than they used to be.  Everything
outside the loadable segment is dropped.  In particular, this causes
the section table and section name strings to be missing.  This
should be fine: real dynamic loaders don't load or inspect these
tables anyway.  The result is roughly equivalent to eu-strip's
--strip-sections option.

The purpose of this change is to enable the vvar and hpet mappings
to be moved to the page following the vDSO load segment.  Currently,
it is possible for the section table to extend into the page after
the load segment, so, if we map it, it risks overlapping the vvar or
hpet page.  This happens whenever the load segment is just under a
multiple of PAGE_SIZE.

The only real subtlety here is that the old code had a C file with
inline assembler that did 'call VDSO32_vsyscall' and a linker script
that defined 'VDSO32_vsyscall = __kernel_vsyscall'.  This most
likely worked by accident: the linker script entry defines a symbol
associated with an address as opposed to an alias for the real
dynamic symbol __kernel_vsyscall.  That caused ld to relocate the
reference at link time instead of leaving an interposable dynamic
relocation.  Since the VDSO32_vsyscall hack is no longer needed, I
now use 'call __kernel_vsyscall', and I added -Bsymbolic to make it
work.  vdso2c will generate an error and abort the build if the
resulting image contains any dynamic relocations, so we won't
silently generate bad vdso images.

(Dynamic relocations are a problem because nothing will even attempt
to relocate the vdso.)
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/2c4fcf45524162a34d87fdda1eb046b2a5cecee7.1399317206.git.luto@amacapital.netSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

just getting rid of bitrot
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

For performance reasons, when SMAP is in use, SMAP is left open for an
entire put_user_try { ... } put_user_catch(); block, however, calling
__put_user() in the middle of that block will close SMAP as the
STAC..CLAC constructs intentionally do not nest.

Furthermore, using __put_user() rather than put_user_ex() here is bad
for performance.

Thus, introduce new [compat_]save_altstack_ex() helpers that replace
__[compat_]save_altstack() for x86, being currently the only
architecture which supports put_user_try { ... } put_user_catch().
Reported-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.8+
Link: http://lkml.kernel.org/n/tip-es5p6y64if71k8p5u08agv9n@git.kernel.org

Commit 3fe26fa3 ("x86: get rid of pt_regs argument in sigreturn variants",
from 2012-11-12) changed the body of PTREGSCALL to drop arg, and
updated the callsites; unfortunately, it forgot to update the
macro argument list, leaving an unused argument.  Fix this.
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: http://lkml.kernel.org/r/1373479468-7175-1-git-send-email-artagnon@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Since all architectures have been converted to use vm_unmapped_area(),
there is no remaining use for the free_area_cache.
Signed-off-by: NMichel Lespinasse <walken@google.com>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dump_seek() does SEEK_CUR, not SEEK_SET; native binfmt_aout
handles it correctly (seeks by PAGE_SIZE - sizeof(struct user),
getting the current position to PAGE_SIZE), compat one seeks
by PAGE_SIZE and ends up at PAGE_SIZE + already written...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

While porting Vince's perf overflow tests I found perf event
breakpoint overflow does not work properly.

I found the x86 RF EFLAG bit not being set when returning
from debug exception after triggering signal handler. Which
is exactly what you get when you set perf breakpoint overflow
SIGIO handler.

This patch and the next two patches fix the underlying bugs.

This patch adds the RF EFLAGS bit to be restored on return from
signal from the original register context before the signal was
entered.

This will prevent the RF flag to disappear when returning
from exception due to the signal handler being executed.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Tested-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NFrederic Weisbecker <fweisbec@gmail.com>
Originally-Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1367421944-19082-2-git-send-email-jolsa@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cleanup.  Every linux_binfmt->core_dump() sets PF_DUMPCORE, move this into
zap_threads() called by do_coredump().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NMandeep Singh Baines <msb@chromium.org>
Cc: Neil Horman <nhorman@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

switch binfmts that use ->read() to that (and to kernel_read()
in several cases in binfmt_flat - sure, it's nommu, but still,
doing ->read() into kmalloc'ed buffer...)
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

their argument types are identical to those of sys_kill and sys_mprotect
resp., so we are not doing any kind of argument validation, etc. in those -
they turn into unconditional branches to corresponding syscalls.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

For some reason they didn't get replaced so far by their
paravirt equivalents, resulting in code to be run with
interrupts disabled that doesn't expect so (causing, in the
observed case, a BUG_ON() to trigger) when syscall auditing is
enabled.

David (Cc-ed) came up with an identical fix, so likely this can
be taken to count as an ack from him.
Reported-by: NPeter Moody <pmoody@google.com>
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/5108E01902000078000BA9C5@nat28.tlf.novell.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Tested-by: NPeter Moody <pmoody@google.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

For some reason they didn't get replaced so far by their
paravirt equivalents, resulting in code to be run with
interrupts disabled that doesn't expect so (causing, in the
observed case, a BUG_ON() to trigger) when syscall auditing is
enabled.

David (Cc-ed) came up with an identical fix, so likely this can
be taken to count as an ack from him.
Reported-by: NPeter Moody <pmoody@google.com>
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/5108E01902000078000BA9C5@nat28.tlf.novell.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Tested-by: NPeter Moody <pmoody@google.com>

note that they are relying on access_ok() already checked by caller.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Again, conditional on CONFIG_GENERIC_SIGALTSTACK
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

32bit wrapper is lost on that; 64bit one is *not*, since
we need to arrange for full pt_regs on stack when we call
sys_execve() and we need to load callee-saved ones from
there afterwards.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signal handling contains a bunch of accesses to individual user space
items, which causes an excessive number of STAC and CLAC
instructions.  Instead, let get/put_user_try ... get/put_user_catch()
contain the STAC and CLAC instructions.

This means that get/put_user_try no longer nests, and furthermore that
it is no longer legal to use user space access functions other than
__get/put_user_ex() inside those blocks.  However, these macros are
x86-specific anyway and are only used in the signal-handling paths; a
simple reordering of moving the larger subroutine calls out of the
try...catch blocks resolves that problem.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1348256595-29119-12-git-send-email-hpa@linux.intel.com