... And convert signal.c and ptrace.c to use it instead of open
coded equivalents.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

Signed-off-by: NThibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

No code change - reduce data footprint.
Signed-off-by: NThibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

pdc_stable v0.30:

This patch introduces 3 more files to the /sys/firmware/stable tree:
- diagnostic, which contains a cryptic hex string
- osdep1, a 16 bytes os-dependent storage area always available
- osdep2, another os-dependent storage area which existence/size depends
on hversion.

This patch also adds code to setup the "Linux" signature in stable
storage. That is to say that starting with this patch, the kernel will
now sign its OSID (0x0006, thx LaMont) in Stable Storage upon boot,
whether pdc_stable is enabled or not.
Signed-off-by: NThibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

pdc_chassis v0.05:

Some machines seems not to implement Chassis warn support. Work around these.
Also cleanup a bit of the code.
Signed-off-by: NThibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

This patch removes a limitation of the original code, so that CHASSIS
codes can be sent to all machines. On machines with a LCD panel, this
code displays "INI" during bootup, "RUN" when the system is booted and
running, "FLT" when a panic occurs, etc.

This part of the code can be enabled/disabled through CONFIG_PDC_CHASSIS

This patch also adds minimalistic support for Chassis warnings, through
a proc entry '/proc/chassis', which will reflect the warnings status (PSU
or fans failure when they happen, NVRAM battery level and temperature
thresholds overflows).

This part of the code can be enabled/disabled through CONFIG_PDC_CHASSIS_WARN
Signed-off-by: NThibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

Signed-off-by: NCarlos O'Donell <carlos@parisc-linux.org>
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

This code has been crufting up the file without any use for quite
a long time, so let's kill it.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

Some debugging code in sba_iommu.c should be testing ioc_needs_fdc,
not directly testing boot_cpu_data.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

Clean up gcc 4.1 warnings noted by Joel Soete.
Kyle McMartin gets kudos for pointing out the issues.
Matthew Wilcox noticed sba_iommu was using open coded versions
of (read|write)X.
Signed-off-by: NGrant Grundler <grundler@parisc-linux.org>
Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org>
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

Joel Soete noticed correctly that the fixup's clobbers must be listed
as the ASM clobbers. FIXUP_BRANCH in unaligned.c has a new macro which
lists all the clobbers in the fixup, we use this throughout the file
to simplify the process of listing clobbers in the future.

A missing "r1" clobber is added to our uaccess.h for the 64-bit
__put_kernel_asm. Interestingly this is a pretty serious bug since gcc
generates pretty good use of r1 as a temporary and the uses of
__put_kernel_asm are varied and dangerous if r1 is scratched during
an invalid write.
Signed-off-by: NJoel Soete <soete.joel@tiscali.be>
Signed-off-by: NCarlos O'Donell <carlos@parisc-linux.org>
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

ldcw,co should always be used on pa2.0, otherwise the strict cache
width alignment requirement is not relaxed.
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>

Trond had apparently merged the same patch twice, causing a duplicate
include of the "internal.h" file, with resulting obvious confusion.

Tssk.  I'm the only one allowed to send out trees that don't even
compile! Who does this Trond guy think he is?
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Copy the softirq bits in preempt_count from the current context into the
hardirq context when using 4K stacks to make the softirq_count macro work
correctly and thereby fix softirq cpu time accounting.
Signed-off-by: NBjörn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* git://git.linux-nfs.org/pub/linux/nfs-2.6: (51 commits)
  nfs: remove nfs_put_link()
  nfs-build-fix-99
  git-nfs-build-fixes
  Merge branch 'odirect'
  NFS: alloc nfs_read/write_data as direct I/O is scheduled
  NFS: Eliminate nfs_get_user_pages()
  NFS: refactor nfs_direct_free_user_pages
  NFS: remove user_addr, user_count, and pos from nfs_direct_req
  NFS: "open code" the NFS direct write rescheduler
  NFS: Separate functions for counting outstanding NFS direct I/Os
  NLM: Fix reclaim races
  NLM: sem to mutex conversion
  locks.c: add the fl_owner to nlm_compare_locks
  NFS: Display the chosen RPCSEC_GSS security flavour in /proc/mounts
  NFS: Split fs/nfs/inode.c
  NFS: Fix typo in nfs_do_clone_mount()
  NFS: Fix compile errors introduced by referrals patches
  NFSv4: Ensure that referral mounts bind to a reserved port
  NFSv4: A root pathname is sent as a zero component4
  NFSv4: Follow a referral
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (244 commits)
  V4L/DVB (4210b): git-dvb: tea575x-tuner build fix
  V4L/DVB (4210a): git-dvb versus matroxfb
  V4L/DVB (4209): Added some BTTV PCI IDs for newer boards
  Fixes some sync issues between V4L/DVB development and GIT
  V4L/DVB (4206): Cx88-blackbird: always set encoder height based on tvnorm->id
  V4L/DVB (4205): Merge tda9887 module into tuner.
  V4L/DVB (4203): Explicitly set the enum values.
  V4L/DVB (4202): allow selecting CX2341x port mode
  V4L/DVB (4200): Disable bitrate_mode when encoding mpeg-1.
  V4L/DVB (4199): Add cx2341x-specific control array to cx2341x.c
  V4L/DVB (4198): Avoid newer usages of obsoleted experimental MPEGCOMP API
  V4L/DVB (4197): Port new MPEG API to saa7134-empress with saa6752hs
  V4L/DVB (4196): Port cx88-blackbird to the new MPEG API.
  V4L/DVB (4193): Update cx2341x fw encoding API doc.
  V4L/DVB (4192): Use control helpers for saa7115, cx25840, msp3400.
  V4L/DVB (4191): Add CX2341X MPEG encoder module.
  V4L/DVB (4190): Add helper functions for control processing to v4l2-common.
  V4L/DVB (4189): Add videodev support for VIDIOC_S/G/TRY_EXT_CTRLS.
  V4L/DVB (4188): Add new MPEG control/ioctl definitions to videodev2.h
  V4L/DVB (4186): Add support for the DNTV Live! mini DVB-T card.
  ...

Not that x86-64 and other architecture support should be difficult to
add (trivial fixups to the data format and add the proper linker script
entry).
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I ran into a bug where the kernel died in the idr code:

cpu 0x1d: Vector: 300 (Data Access) at [c000000b7096f710]
    pc: c0000000001f8984: .idr_get_new_above_int+0x140/0x330
    lr: c0000000001f89b4: .idr_get_new_above_int+0x170/0x330
    sp: c000000b7096f990
   msr: 800000000000b032
   dar: 0
 dsisr: 40010000
  current = 0xc000000b70d43830
  paca    = 0xc000000000556900
    pid   = 2022, comm = hwup
1d:mon> t
[c000000b7096f990] c0000000000d2ad8 .expand_files+0x2e8/0x364 (unreliable)
[c000000b7096faa0] c0000000001f8bf8 .idr_get_new_above+0x18/0x68
[c000000b7096fb20] c00000000002a054 .init_new_context+0x5c/0xf0
[c000000b7096fbc0] c000000000049dc8 .copy_process+0x91c/0x1404
[c000000b7096fcd0] c00000000004a988 .do_fork+0xd8/0x224
[c000000b7096fdc0] c00000000000ebdc .sys_clone+0x5c/0x74
[c000000b7096fe30] c000000000008950 .ppc_clone+0x8/0xc

Update Documentation/devices.txt with a new version from the LANANA site
http://www.lanana.org/docs/device-list/devices-2.6+.txtSigned-off-by: NJan Engelhardt <jengelh@gmx.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

likely profiling shows that the following is a miss.

After boot:
[+- ] Type | # True | # False | Function:Filename@Line
+unlikely |     1074|        0  prune_dcache()@:fs/dcache.c@409

After a bonnie++ run:
+unlikely |    66716|    19584  prune_dcache()@:fs/dcache.c@409

So remove it.
Signed-off-by: NHua Zhong <hzhong@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Stringify does what it was told to do.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch will fix a boot memory reservation bug that trashes memory on
the ES7000 when loading the kdump crash kernel.

The code in arch/x86_64/kernel/setup.c to reserve boot memory for the crash
kernel uses the non-numa aware "reserve_bootmem" function instead of the
NUMA aware "reserve_bootmem_generic".  I checked to make sure that no other
function was using "reserve_bootmem" and found none, except the ones that
had NUMA ifdef'ed out.

I have tested this patch only on an ES7000 with NUMA on and off (numa=off)
in a single (non-NUMA) and multi-cell (NUMA) configurations.
Signed-off-by: NAmul Shah <amul.shah@unisys.com>
Looks-good-to: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Cleanup & fix 31 bit compilation:

  CC      arch/s390/kernel/setup.o
arch/s390/kernel/setup.c:83: error: initializer element is not computable at
                                    load time
arch/s390/kernel/setup.c:83: error: (near initialization for
                                    'code_resource.start')
Not sure which patch in the -mm tree breaks this, but since this can be
considered a cleanup it can be merged anyway.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

au1550 ac97 driver works fine on au1200 too.

Comments at the top of file state this code is GPL, so lets
mark it as GPL too.
Signed-off-by: NDomen Puncer <domen.puncer@ultra.si>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add parport interfaces to kernel-doc template.  Small doc.  cleanups in 2
parport source files.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Error paths didn't spin_unlock.
Signed-off-by: NDomen Puncer <domen.puncer@ultra.si>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Things which force me think a little: why so?
Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In current 2.6.17 implementation, signal_struct refered from task_struct is
used for per-process data structure.  The pacct facility also uses it as a
per-process data structure to store stime, utime, minflt, majflt.  But those
members are saved in __exit_signal().  It's too late.

For example, if some threads exits at same time, pacct facility has a
possibility to drop accountings for a part of those threads.  (see, the
following 'The results of original 2.6.17 kernel') I think accounting
information should be completely collected into the per-process data structure
before writing out an accounting record.

This patch fixes this matter.  Accumulation of stime, utime, minflt and majflt
are done before generating accounting record.

[mingo@elte.hu: fix acct_collect() siglock bug found by lockdep]
Signed-off-by: NKaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When pacct facility generate an 'ac_flag' field in accounting record, it
refers a task_struct of the thread which died last in the process.  But any
other task_structs are ignored.

Therefore, pacct facility drops ASU flag even if root-privilege operations are
used by any other threads except the last one.  In addition, AFORK flag is
always set when the thread of group-leader didn't die last, although this
process has called execve() after fork().

We have a same matter in ac_exitcode.  The recorded ac_exitcode is an exit
code of the last thread in the process.  There is a possibility this exitcode
is not the group leader's one.

The pacct facility need an i/o operation when an accounting record is
generated.  There is a possibility to wake OOM killer up.  If OOM killer is
activated, it kills some processes to make them release process memory
regions.

But acct_process() is called in the killed processes context before calling
exit_mm(), so those processes cannot release own memory.  In the results, any
processes stop in this point and it finally cause a system stall.

Apply some small corrections to the memory barrier document, as contributed by:

	Christoph Lameter <clameter@sgi.com>
	Kirill Smelkov <kirr@mns.spb.ru>
	Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for SyncLink GT2 adapter to driver.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix diagnostics error reporting that was being overwritten by incorrect use
of return codes from individual diagnostic functions.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add ability to return HDLC CRC to user application.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add custom HDLC idle pattern feature.

It allows the user to specify an arbitrary 8 or 16 bit repeating pattern on
the transmit data pin between HDLC frames.

In most cases the idle pattern is continuous ones or flags as supported by off
the shelf synchronous controllers and defined in the ISO3309 standard.  Some
applications (radio/satellite modems, connections to legacy military hardware)
require non-standard patterns.
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/net/irda/irda-usb.c: In function 'stir421x_patch_device':
drivers/net/irda/irda-usb.c:1108: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'size_t'

Cc: Greg KH <greg@kroah.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move kthread API kernel-doc from kthread.h to kthread.c & fix it.
Add kthread API to kernel-api DocBook.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add DMI interface functions to a new Firmware Interfaces chapter in the
kernel-api DocBook.  Clean up kernel-doc in drivers/firmware/dmi_scan.c.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>