- 08 7月, 2008 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
The 32-bit early_ioremap will work equally well for 64-bit, so just use it. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 02 6月, 2008 1 次提交
-
-
由 Linus Torvalds 提交于
On Tue, 27 May 2008, Linus Torvalds wrote: > > Expecting people to fix up all drivers is simply not going to happen. And > serializing things shouldn't be *that* expensive. People who cannot take > the expense can continue to use the magic __raw_writel() etc stuff. Of course, for non-x86, you kind of have to expect drivers to be well-behaved, so non-x86 can probably avoid this simply because there are less relevant drivers involved. Here's a UNTESTED patch for x86 that may or may not compile and work, and which serializes (on a compiler level) the IO accesses against regular memory accesses. __read[bwlq]()/__write[bwlq]() are not serialized with a :"memory" barrier, although since they still use "asm volatile" I suspect that i practice they are probably serial too. Did not look very closely at any generated code (only did a trivial test to see that the code looks *roughly* correct). Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 01 5月, 2008 1 次提交
-
-
由 Jean Delvare 提交于
The declaration of dmi helper functions is a bit messy and inconsistent at the moment: * On ia64 they are declared in <asm/io.h>. * On x86-64 they are declared in <asm/dmi.h>. * On i386 they are declared both in <asm/io.h> and <asm/dmi.h>. Fix the header files so that the dmi helper functions are consistently defined in <asm/dmi.h>. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 4月, 2008 1 次提交
-
-
Add xlate and unxlate around /dev/mem read/write. This sets up the mapping that can be used for /dev/mem read and write without aliasing worries. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 4月, 2008 1 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 3月, 2008 1 次提交
-
-
由 Linus Torvalds 提交于
It appears that 64-bit PCI resources cannot possibly ever have worked on x86-32 even when the RESOURCES_64BIT config option was set, because any driver that tried to [pci_]ioremap() the resource would have been unable to do so because the high 32 bits would have been silently dropped on the floor by the ioremap() routines that only used "unsigned long". Change them to use "resource_size_t" instead, which properly encodes the whole 64-bit resource data if RESOURCES_64BIT is enabled. Acked-by: NH. Peter Anvin <hpa@kernel.org> Acked-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 2月, 2008 1 次提交
-
-
由 Andi Kleen 提交于
Now that the only user does it on its own remove the NUMAQ support macros in io_32.h The next step would be to convert the preprocessor mess to actually readable standard inlines. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 30 1月, 2008 6 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Huang, Ying 提交于
This patch renames bt_ioremap to early_ioremap, which is used in x86_64. This makes it easier to merge i386 and x86_64 usage. [ mingo@elte.hu: fix ] Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Huang, Ying 提交于
This patch makes it possible for bt_ioremap() to be used before paging_init(), via providing an early implementation of set_fixmap() that can be used before paging_init(). This way boot_ioremap() can be replaced by bt_ioremap(). Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Prepare ioremap() to default to uncached. This will be the safest - but first we have to fix CPA. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
various changes to the in_p/out_p delay details: - add the io_delay=none method - make each method selectable from the kernel config - simplify the delay code a bit by getting rid of an indirect function call - add the /proc/sys/kernel/io_delay_type sysctl - change 'io_delay=standard|alternate' to io_delay=0x80 and io_delay=0xed - make the io delay config not depend on CONFIG_DEBUG_KERNEL Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Tested-by: N"David P. Reed" <dpreed@reed.com>
-
由 Rene Herman 提交于
x86: provide a DMI based port 0x80 I/O delay override. Certain (HP) laptops experience trouble from our port 0x80 I/O delay writes. This patch provides for a DMI based switch to the "alternate diagnostic port" 0xed (as used by some BIOSes as well) for these. David P. Reed confirmed that port 0xed works for him and provides a proper delay. The symptoms of _not_ working are a hanging machine, with "hwclock" use being a direct trigger. Earlier versions of this attempted to simply use udelay(2), with the 2 being a value tested to be a nicely conservative upper-bound with help from many on the linux-kernel mailinglist but that approach has two problems. First, pre-loops_per_jiffy calibration (which is post PIT init while some implementations of the PIT are actually one of the historically problematic devices that need the delay) udelay() isn't particularly well-defined. We could initialise loops_per_jiffy conservatively (and based on CPU family so as to not unduly delay old machines) which would sort of work, but... Second, delaying isn't the only effect that a write to port 0x80 has. It's also a PCI posting barrier which some devices may be explicitly or implicitly relying on. Alan Cox did a survey and found evidence that additionally some drivers may be racy on SMP without the bus locking outb. Switching to an inb() makes the timing too unpredictable and as such, this DMI based switch should be the safest approach for now. Any more invasive changes should get more rigid testing first. It's moreover only very few machines with the problem and a DMI based hack seems to fit that situation. This also introduces a command-line parameter "io_delay" to override the DMI based choice again: io_delay=<standard|alternate> where "standard" means using the standard port 0x80 and "alternate" port 0xed. This retains the udelay method as a config (CONFIG_UDELAY_IO_DELAY) and command-line ("io_delay=udelay") choice for testing purposes as well. This does not change the io_delay() in the boot code which is using the same port 0x80 I/O delay but those do not appear to be a problem as David P. Reed reported the problem was already gone after using the udelay version. He moreover reported that booting with "acpi=off" also fixed things and seeing as how ACPI isn't touched until after this DMI based I/O port switch I believe it's safe to leave the ones in the boot code be. The DMI strings from David's HP Pavilion dv9000z are in there already and we need to get/verify the DMI info from other machines with the problem, notably the HP Pavilion dv6000z. This patch is partly based on earlier patches from Pavel Machek and David P. Reed. Signed-off-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 18 10月, 2007 1 次提交
-
-
由 Andrew Morton 提交于
- Fix this: include/asm/io.h: In function `memcpy_fromio': include/asm/io.h:208: warning: passing argument 2 of `__memcpy' discards qualifiers from pointer target type - Clean up code a bit Reported-by: NUwe Bugla <uwe.bugla@gmx.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 17 10月, 2007 1 次提交
-
-
由 Ralf Baechle 提交于
dma_cache_(wback|inv|wback_inv) were the earliest attempt on a generalized cache managment API for I/O purposes. Originally it was basically the raw MIPS low level cache API exported to the entire world. The API has suffered from a lack of documentation, was not very widely used unlike it's more modern brothers and can easily be replaced by dma_cache_sync. So remove it rsp. turn the surviving bits back into an arch private API, as discussed on linux-arch. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NPaul Mackerras <paulus@samba.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NKyle McMartin <kyle@parisc-linux.org> Acked-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 10月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
Move the headers to include/asm-x86 and fixup the header install make rules Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 23 8月, 2007 1 次提交
-
-
由 Rolf Eike Beer 提交于
This useful interface is hardly mentioned anywhere in the in-tree documentation. Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de> Cc: Tejun Heo <htejun@gmail.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 17 7月, 2007 1 次提交
-
-
由 Yinghai Lu 提交于
Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and include/asm-x86_64/serial.h. the serial8250_ports need to be probed late in serial initializing stage. the console_init=>serial8250_console_init=> register_console=>serial8250_console_setup will return -ENDEV, and console ttyS0 can not be enabled at that time. need to wait till uart_add_one_port in drivers/serial/serial_core.c to call register_console to get console ttyS0. that is too late. Make early_uart to use early_param, so uart console can be used earlier. Make it to be bootconsole with CON_BOOT flag, so can use console handover feature. and it will switch to corresponding normal serial console automatically. new command line will be: console=uart8250,io,0x3f8,9600n8 console=uart8250,mmio,0xff5e0000,115200n8 or earlycon=uart8250,io,0x3f8,9600n8 earlycon=uart8250,mmio,0xff5e0000,115200n8 it will print in very early stage: Early serial console at I/O port 0x3f8 (options '9600n8') console [uart0] enabled later for console it will print: console handover: boot [uart0] -> real [ttyS0] Signed-off-by: <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 5月, 2007 1 次提交
-
-
由 Rusty Russell 提交于
paravirt.c used to implement native versions of all low-level functions. Far cleaner is to have the native versions exposed in the headers and as inline native_XXX, and if !CONFIG_PARAVIRT, then simply #define XXX native_XXX. There are several nice side effects: 1) write_dt_entry() now takes the correct "struct Xgt_desc_struct *" not "void *". 2) load_TLS is reintroduced to the for loop, not manually unrolled with a #error in case the bounds ever change. 3) Macros become inlines, with type checking. 4) Access to the native versions is trivial for KVM, lguest, Xen and others who might want it. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
- 10 2月, 2007 1 次提交
-
-
由 Al Viro 提交于
On all targets that sucker boils down to memcpy_fromio(sbk->data, from, len). The function name is highly misguiding (it _never_ does any checksums), the last argument is just a noise and simply expanding the call to memcpy_fromio() gives shorter and more readable source. For a lot of reasons it has almost no remaining users, so it's better to just outright kill it. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 12月, 2006 1 次提交
-
-
由 Rusty Russell 提交于
Create a paravirt.h header for all the critical operations which need to be replaced with hypervisor calls, and include that instead of defining native operations, when CONFIG_PARAVIRT. This patch does the dumbest possible replacement of paravirtualized instructions: calls through a "paravirt_ops" structure. Currently these are function implementations of native hardware: hypervisors will override the ops structure with their own variants. All the pv-ops functions are declared "fastcall" so that a specific register-based ABI is used, to make inlining assember easier. And: +From: Andy Whitcroft <apw@shadowen.org> The paravirt ops introduce a 'weak' attribute onto memory_setup(). Code ordering leads to the following warnings on x86: arch/i386/kernel/setup.c:651: warning: weak declaration of `memory_setup' after first use results in unspecified behavior Move memory_setup() to avoid this. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
-
- 12 10月, 2006 1 次提交
-
-
由 Matthew Wilcox 提交于
There's nothing arch-specific about check_signature(), so move it to <linux/io.h>. Use a cross between the Alpha and i386 implementations as the generic one. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 4月, 2006 1 次提交
-
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
- 24 3月, 2006 1 次提交
-
-
由 Al Viro 提交于
unused isa_...() helpers removed. Adrian Bunk: The asm-sh part was rediffed due to unrelated changes. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 1月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
Some people need it now on 64bit so reuse the i386 code for x86-64. This will be also useful for future bug workarounds. It is a bit simplified there because there is no need to do it very early on x86-64. This means it doesn't need early ioremap et.al. We run it as a core initcall right now. I hope it's not needed for early setup. I added a general CONFIG_DMI symbol in case IA64 or someone else wants to reuse the code later too. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-