- 28 5月, 2018 2 次提交
-
-
由 Thiago Jung Bauermann 提交于
This test verifies that the AMR, IAMR and UAMOR are being written to a process' core file. Signed-off-by: NThiago Jung Bauermann <bauerman@linux.ibm.com> [mpe: Simplify make rule] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Thiago Jung Bauermann 提交于
This test exercises read and write access to the AMR, IAMR and UAMOR. Signed-off-by: NThiago Jung Bauermann <bauerman@linux.ibm.com> [mpe: Simplify make rule] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 24 5月, 2018 2 次提交
-
-
由 Michael Neuling 提交于
This test the ptrace hw breakpoints via PTRACE_SET_DEBUGREG and PPC_PTRACE_SETHWDEBUG. This test was use to find the bugs fixed by these recent commits: 4f7c06e2 powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG cd6ef7ee powerpc/ptrace: Fix enforcement of DAWR constraints Signed-off-by: NMichael Neuling <mikey@neuling.org> [mpe: Add SPDX tag, clang format it] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Neuling 提交于
Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 21 5月, 2018 1 次提交
-
-
由 Michael Neuling 提交于
Paste on POWER9 only works on accelerators and no longer on real memory. Hence this test is broken so remove it. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 14 5月, 2018 1 次提交
-
-
由 Nicholas Piggin 提交于
The exec_target binary could segfault calling _exit(2) because r13 is not set up properly (and libc looks at that when performing a syscall). Call SYS_exit using syscall(2) which doesn't seem to have this problem. Signed-off-by: NNicholas Piggin <npiggin@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 27 4月, 2018 1 次提交
-
-
由 Andy Lutomirski 提交于
32-bit user code that uses int $80 doesn't care about r8-r11. There is, however, some 64-bit user code that intentionally uses int $0x80 to invoke 32-bit system calls. From what I've seen, basically all such code assumes that r8-r15 are all preserved, but the kernel clobbers r8-r11. Since I doubt that there's any code that depends on int $0x80 zeroing r8-r11, change the kernel to preserve them. I suspect that very little user code is broken by the old clobber, since r8-r11 are only rarely allocated by gcc, and they're clobbered by function calls, so they only way we'd see a problem is if the same function that invokes int $0x80 also spills something important to one of these registers. The current behavior seems to date back to the historical commit "[PATCH] x86-64 merge for 2.6.4". Before that, all regs were preserved. I can't find any explanation of why this change was made. Update the test_syscall_vdso_32 testcase as well to verify the new behavior, and it strengthens the test to make sure that the kernel doesn't accidentally permute r8..r15. Suggested-by: NDenys Vlasenko <dvlasenk@redhat.com> Signed-off-by: NAndy Lutomirski <luto@kernel.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Link: https://lkml.kernel.org/r/d4c4d9985fbe64f8c9e19291886453914b48caee.1523975710.git.luto@kernel.org
-
- 25 4月, 2018 7 次提交
-
-
由 Jeffrin Jose T 提交于
This is a patch to the tools/testing/selftests/firmware/fw_run_tests.sh file which fixes a bug which calls to a wrong function name,which in turn blocks the execution of certain tests. Signed-off-by: NJeffrin Jose T <jeffrin@rajagiritech.edu.in> Acked-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Masami Hiramatsu 提交于
Add a testcase for multiple actions with different parameters on an event trigger, which has been fixed by commit 192c283e93bd ("tracing: Add action comparisons when testing matching hist triggers"). Link: http://lkml.kernel.org/r/152292055227.15769.6327959816123227152.stgit@devboxReviewed-by: NTom Zanussi <tom.zanussi@linux.intel.com> Tested-by: NTom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
由 Masami Hiramatsu 提交于
Previous testcase redirects echo-out into /dev/null using "&>" as below echo "trigger-command" >> trigger &> /dev/null But this means redirecting both stdout and stderr into /dev/null because it is same as below echo "trigger-command" >> trigger > /dev/null 2>&1 So ">> trigger" redirects stdout to trigger file, but next "> /dev/null" redirects stdout to /dev/null again and the last "2>/&1" redirects stderr to stdout (/dev/null) This fixes it by "2> /dev/null". And also, since it must fail, add "!" to echo command. Link: http://lkml.kernel.org/r/152292052250.15769.12565292689264162435.stgit@devbox Fixes: f06eec4d ("selftests: ftrace: Add inter-event hist triggers testcases") Reviewed-by: NTom Zanussi <tom.zanussi@linux.intel.com> Tested-by: NTom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org> Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
-
由 Kan Liang 提交于
PMU name is printed repeatedly for interval print, for example: perf stat --no-merge -e 'unc_m_clockticks' -a -I 1000 # time counts unit events 1.001053069 243,702,144 unc_m_clockticks [uncore_imc_4] 1.001053069 244,268,304 unc_m_clockticks [uncore_imc_2] 1.001053069 244,427,386 unc_m_clockticks [uncore_imc_0] 1.001053069 244,583,760 unc_m_clockticks [uncore_imc_5] 1.001053069 244,738,971 unc_m_clockticks [uncore_imc_3] 1.001053069 244,880,309 unc_m_clockticks [uncore_imc_1] 2.002024821 240,818,200 unc_m_clockticks [uncore_imc_4] [uncore_imc_4] 2.002024821 240,767,812 unc_m_clockticks [uncore_imc_2] [uncore_imc_2] 2.002024821 240,764,215 unc_m_clockticks [uncore_imc_0] [uncore_imc_0] 2.002024821 240,759,504 unc_m_clockticks [uncore_imc_5] [uncore_imc_5] 2.002024821 240,755,992 unc_m_clockticks [uncore_imc_3] [uncore_imc_3] 2.002024821 240,750,403 unc_m_clockticks [uncore_imc_1] [uncore_imc_1] For each print, the PMU name is unconditionally appended to the counter->name. Need to check the counter->name first. If the PMU name is already appended, do nothing. Committer notes: Add and use perf_evsel->uniquified_name bool instead of doing the more expensive strstr(event->name, pmu->name). Signed-off-by: NKan Liang <kan.liang@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Agustin Vega-Frias <agustinv@codeaurora.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: 8c5421c0 ("perf pmu: Display pmu name when printing unmerged events in stat") Link: http://lkml.kernel.org/r/1524594014-79243-5-git-send-email-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kan Liang 提交于
Perf doesn't support mixed events from different PMUs (except software event) in a group. The perf stat should output <not counted>/<not supported> for all events, but it doesn't. For example, perf stat -e '{cycles,uncore_imc_5/umask=0xF,event=0x4/,instructions}' <not counted> cycles <not supported> uncore_imc_5/umask=0xF,event=0x4/ 1,024,300 instructions If perf fails to open an event, it doesn't error out directly. It will disable some features and retry, until the event is opened or all features are disabled. The disabled features will not be re-enabled. The group read is one of these features. For the example as above, the IMC event and the leader event "cycles" are from different PMUs. Opening the IMC event must fail. The group read feature must be disabled for IMC event and the followed event "instructions". The "instructions" event has the same PMU as the leader "cycles". It can be opened successfully. Since the group read feature has been disabled, the "instructions" event will be read as a single event, which definitely has a value. The group read fallback is still useful for the case which kernel doesn't support group read. It is good enough to be handled only by the leader. For the fallback request from members, it must be caused by an error. The fallback only breaks the semantics of group. Limit the group read fallback only for the leader. Committer testing: On a broadwell t450s notebook: Before: # perf stat -e '{cycles,unc_cbo_cache_lookup.read_i,instructions}' sleep 1 Performance counter stats for 'sleep 1': <not counted> cycles <not supported> unc_cbo_cache_lookup.read_i 818,206 instructions 1.003170887 seconds time elapsed Some events weren't counted. Try disabling the NMI watchdog: echo 0 > /proc/sys/kernel/nmi_watchdog perf stat ... echo 1 > /proc/sys/kernel/nmi_watchdog After: # perf stat -e '{cycles,unc_cbo_cache_lookup.read_i,instructions}' sleep 1 Performance counter stats for 'sleep 1': <not counted> cycles <not supported> unc_cbo_cache_lookup.read_i <not counted> instructions 1.001380511 seconds time elapsed Some events weren't counted. Try disabling the NMI watchdog: echo 0 > /proc/sys/kernel/nmi_watchdog perf stat ... echo 1 > /proc/sys/kernel/nmi_watchdog # Reported-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NKan Liang <kan.liang@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Agustin Vega-Frias <agustinv@codeaurora.org> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: 82bf311e ("perf stat: Use group read for event groups") Link: http://lkml.kernel.org/r/1524594014-79243-3-git-send-email-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kan Liang 提交于
Perf doesn't support mixed events from different PMUs (except software event) in a group. For this case, only "<not counted>" or "<not supported>" are printed out. There is no hint which guides users to fix the issue. Checking the PMU type of events to determine if they are from the same PMU. There may be false alarm for the checking. E.g. the core PMU has different PMU type. But it should not happen often. The false alarm can also be tolerated, because: - It only happens on error path. - It just provides a possible solution for the issue. Signed-off-by: NKan Liang <kan.liang@linux.intel.com> Cc: Agustin Vega-Frias <agustinv@codeaurora.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1524594014-79243-2-git-send-email-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kan Liang 提交于
When counting uncore event with alias, core event is mistakenly involved, for example: perf stat --no-merge -e "unc_m_cas_count.all" -C0 sleep 1 Performance counter stats for 'CPU(s) 0': 0 unc_m_cas_count.all [uncore_imc_4] 0 unc_m_cas_count.all [uncore_imc_2] 0 unc_m_cas_count.all [uncore_imc_0] 153,640 unc_m_cas_count.all [cpu] 0 unc_m_cas_count.all [uncore_imc_5] 25,026 unc_m_cas_count.all [uncore_imc_3] 0 unc_m_cas_count.all [uncore_imc_1] 1.001447890 seconds time elapsed The reason is that current implementation doesn't check PMU name of a event when adding its alias into the alias list for core PMU. The uncore event aliases are mistakenly added. This bug was introduced in: commit 14b22ae0 ("perf pmu: Add helper function is_pmu_core to detect PMU CORE devices") Checking the PMU name for all PMUs on X86 and other architectures except ARM. There is no behavior change for ARM. Signed-off-by: NKan Liang <kan.liang@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Agustin Vega-Frias <agustinv@codeaurora.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Fixes: 14b22ae0 ("perf pmu: Add helper function is_pmu_core to detect PMU CORE devices") Link: http://lkml.kernel.org/r/1524594014-79243-1-git-send-email-kan.liang@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 23 4月, 2018 10 次提交
-
-
由 Thomas Richter 提交于
Command 'perf record' calls: cmd_report() record__auxtrace_init() auxtrace_record__init() On s390 function auxtrace_record__init() returns random return value due to missing initialization. This sometime causes 'perf record' to exit immediately without error message and creating a perf.data file. Fix this by setting error the return code to zero before returning from platform specific functions which may not set the error code in call cases. Signed-off-by: NThomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180423142940.21143-1-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Sangwon Hong 提交于
Several options were incorrectly described, some lacked describing required arguments while others were simply not documented, fix it. Signed-off-by: NSangwon Hong <qpakzk@gmail.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/1524382146-19609-1-git-send-email-qpakzk@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
.. and other related fields that do not need to be enabled for events that have sampling leader. It fixes the perf top usage Ingo reported broken: # perf top -e '{cycles,msr/aperf/}:S' The 'msr/aperf/' event is configured for write_back sampling, which is not allowed by the MSR PMU, so it fails to create the event. Adjusting related attr test. Reported-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180423090823.32309-6-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Currently all the event parsing fails end up in the event_pmu rule, and display misleading help like: $ perf stat -e inst kill event syntax error: 'inst' \___ Cannot find PMU `inst'. Missing kernel support? ... The reason is that the event_pmu is too strong and match also single string. Changing it to force the '/' separators to be part of the rule, and getting the proper error now: $ perf stat -e inst kill event syntax error: 'inst' \___ parser error Run 'perf list' for a list of valid events ... Signed-off-by: NJiri Olsa <jolsa@kernel.org> Reported-by: NIngo Molnar <mingo@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180423090823.32309-5-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
The 'perf stat' fallback for EACCES error sets the exclude_kernel perf_event_attr and tries perf_event_open() again with it. In addition, it also changes the name of the event to reflect that change by adding the 'u' modifier. But it does not take into account the '/' separator, so the event name can end up mangled, like: (note the '/:' characters) $ perf stat -e cpu/cpu-cycles/ kill ... 386,832 cpu/cpu-cycles/:u Adding the code to check on the '/' separator and set the following correct event name: $ perf stat -e cpu/cpu-cycles/ kill ... 388,548 cpu/cpu-cycles/u Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180423090823.32309-4-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Thomas Richter 提交于
perf test case 58 (record+probe_libc_inet_pton.sh) executed on s390x using kernel 4.16.0rc3 displays this result: # perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 probe_libc:inet_pton: (3ffa0240448) __GI___inet_pton (/usr/lib64/libc-2.26.so) gaih_inet (inlined) __GI_getaddrinfo (inlined) main (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) _start (/usr/bin/ping) After I installed kernel 4.16.0 the same tests uses commands: # perf record -e probe_libc:inet_pton/call-graph=dwarf/ -o /tmp/perf.data.abc ping -6 -c 1 ::1 # perf script -i /tmp/perf.data.abc and displays: ping 39048 [006] 84230.381198: probe_libc:inet_pton: (3ffa0240448) 140448 __GI___inet_pton (/usr/lib64/libc-2.26.so) fbde1 gaih_inet (inlined) fe2b9 __GI_getaddrinfo (inlined) 398d main (/usr/bin/ping) Nothing else changed including glibc elfutils and other libraries picked up by the build. The entries for __libc_start_main and _start are missing. I bisected missing __libc_start_main and _start to commit Fixes: 3d20c624 ("perf unwind: Unwind with libdw doesn't take symfs into account") When I undo this commit I get this call stack on s390: [root@s35lp76 perf]# ./perf script -i /tmp/perf.data.abc ping 39048 [006] 84230.381198: probe_libc:inet_pton: (3ffa0240448) 140448 __GI___inet_pton (/usr/lib64/libc-2.26.so) fbde1 gaih_inet (inlined) fe2b9 __GI_getaddrinfo (inlined) 398d main (/usr/bin/ping) 22fbd __libc_start_main (/usr/lib64/libc-2.26.so) 457b _start (/usr/bin/ping) Looks like dwarf functions dwfl_xxx create different call back stack trace when using file /usr/lib/debug/usr/bin/ping-20161105-7.fc27.s390x.debug instead of file /usr/bin/ping. Fix this test case on s390 and do not expect any call back stack entry after the main() function. Also be more robust and accept a leading __GI_ prefix in front of getaddrinfo. On x86 this test case shows the same call stack using both kernel versions 4.16.0rc3 and 4.16.0 and also stops at main: [root@f27 perf]# ./perf script -i /tmp/perf.data.tmr ping 4446 [000] 172.027088: probe_libc:inet_pton: (7fdfa08c93c0) 1393c0 __GI___inet_pton (/usr/lib64/libc-2.26.so) fe60d getaddrinfo (/usr/lib64/libc-2.26.so) 2f40 main (/usr/bin/ping) [root@f27 perf]# Signed-off-by: NThomas Richter <tmricht@linux.ibm.com> Reviewed-by: NHendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Martin Vuille <jpmv27@aim.com> Link: http://lkml.kernel.org/r/20180423082428.7930-1-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Thomas Richter 提交于
Make the type field in pmu-events/arch/s390/mapfile.cvs more generic to match the created cpuid string for s390. The pattern also checks for the counter first version number and counter second version number ([13]\.[1-5]) and the authorization field which follows. These numbers do not exist in the cpuid identification string when perf commands are executed on a z/VM environment (which does not support CPU counter measurement facility). CPUID string for LPAR: cpuid : IBM,3906,704,M03,3.5,002f CPUID string for z/VM: cpuid : IBM,2964,702,N96 This allows the removal of s390 specific cpuid compare code and uses the common compare function with its regular expression matching algorithm. Signed-off-by: NThomas Richter <tmricht@linux.ibm.com> Reviewed-by: NHendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180423081745.3672-1-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
map_groups__fixup_end() was called to set the end addresses of kernel and module maps. But now since machine__create_modules() sets the end address of modules properly, the only remaining piece is the kernel map. We can set it with adjacent module's address directly instead of calling map_groups__fixup_end(). If there's no module after the kernel map, the end address will be ~0ULL. Since it also changes the start address of the kernel map, it needs to re-insert the map to the kmaps in order to keep a correct ordering. Kim reported that it caused problems on ARM64. Reported-by: NKim Phillips <kim.phillips@arm.com> Tested-by: NKim Phillips <kim.phillips@arm.com> Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20180419235915.GA19067@sejongSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ben Hutchings 提交于
Commit 65c79230 tried to clear the custom firmware path on exit by writing a single space to the firmware_class.path parameter. This doesn't work because nothing strips this space from the value stored and fw_get_filesystem_firmware() only ignores zero-length paths. Instead, write a null byte. Fixes: 0a8adf58 ("test: add firmware_class loader test") Fixes: 65c79230 ("test_firmware: fix setting old custom fw path back on exit") Signed-off-by: NBen Hutchings <ben.hutchings@codethink.co.uk> Acked-by: NLuis R. Rodriguez <mcgrof@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ben Hutchings 提交于
List all the scripts invoked by fw_run_tests.sh, so that "make TARGETS=firmware install" keeps working. Fixes: 29a1c00c ("test_firmware: add simple firmware firmware test ...") Fixes: b3cf21fa ("test_firmware: test three firmware kernel configs ...") Signed-off-by: NBen Hutchings <ben.hutchings@codethink.co.uk> Acked-by: NLuis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 19 4月, 2018 10 次提交
-
-
由 Mathieu Poirier 提交于
Move CoreSight headers to the SPDX identifier. Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1524089118-27595-1-git-send-email-mathieu.poirier@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Yonghong Song 提交于
The bpf selftests test_sock and test_sock_addr.sh failed in my test machine. The failure looks like: $ ./test_sock Test case: bind4 load with invalid access: src_ip6 .. [PASS] Test case: bind4 load with invalid access: mark .. [PASS] Test case: bind6 load with invalid access: src_ip4 .. [PASS] Test case: sock_create load with invalid access: src_port .. [PASS] Test case: sock_create load w/o expected_attach_type (compat mode) .. [FAIL] Test case: sock_create load w/ expected_attach_type .. [FAIL] Test case: attach type mismatch bind4 vs bind6 .. [FAIL] ... Summary: 4 PASSED, 12 FAILED $ ./test_sock_addr.sh Wait for testing IPv4/IPv6 to become available ..... ERROR: Timeout waiting for test IP to become available. In test_sock, bpf program loads failed due to hitting memlock limits. In test_sock_addr.sh, my test machine is a ipv6 only test box and using "ping" without specifying address family for an ipv6 address does not work. This patch fixed the issue by including header bpf_rlimit.h in test_sock.c and test_sock_addr.c, and specifying address family for ping command. Cc: Andrey Ignatov <rdna@fb.com> Signed-off-by: NYonghong Song <yhs@fb.com> Acked-by: NAndrey Ignatov <rdna@fb.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-
由 Arnaldo Carvalho de Melo 提交于
Since e145242e ("syscalls/core, syscalls/x86: Clean up syscall stub naming convention") changed the main syscall function for 'epoll_pwait' to something other than the expected 'SyS_epoll_pwait the' 'perf test BPF' entries started failing, fix it by using something called from the main syscall function instead, 'epoll_wait', which should keep this test working in older kernels too. Before: # perf test BPF 40: BPF filter : 40.1: Basic BPF filtering : FAILED! 40.2: BPF pinning : Skip 40.3: BPF prologue generation : Skip 40.4: BPF relocation checker : Skip If we use -v for that test we see the problem: Probe point 'SyS_epoll_pwait' not found. After: # perf test BPF 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/r/tip-y24nmn70cs2am8jh4i344dng@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
In the 'perf test "mmap interface"' we try creating events for several tracepoints, but when perf_evsel__new() fails we're not showing which one is failing, fix that to help diagnosing problems, such as the syscall tracepoints ones being found and fixes in this merge window. Now the failing tests shows: # perf test -v "mmap interface" 4: Read samples using the mmap interface : --- start --- test child forked, pid 14311 <SNIP> perf_evsel__new(sys_enter_getppid) test child finished with -1 ---- end ---- Read samples using the mmap interface: FAILED! # Now to check why the syscalls:sys_enter_getppid is failing... # ls -la /sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid ls: cannot access '/sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid': No such file or directory # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-44xk0ycdzrfzx1o9rklf5itl@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ravi Bangoria 提交于
Few error messages does not have '\n' at the end and thus next prompt gets printed in the same line. Ex, linux~$ perf buildid-cache -verbose --add ./a.out Error: did you mean `--verbose` (with two dashes ?)linux~$ Fix it. Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Sihyeon Jang <uneedsihyeon@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180417041346.5617-2-ravi.bangoria@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Andi Kleen 提交于
'perf record' suggests to enable the APIC on errors. APIC is practically always used today and the problem is usually somewhere else. Just remove the outdated suggestion. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20180406203812.3087-5-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Andi Kleen 提交于
When perf record encounters an error setting up an event it suggests to enable CONFIG_PERF_EVENTS. This is misleading because: - Usually it is enabled (it is really hard to disable on x86) - The problem is usually somewhere else, e.g. the CPU is not supported or an invalid configuration has been used. Remove the misleading suggestion. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20180406203812.3087-4-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Andi Kleen 提交于
Clarify in the browser help that ESC in tui mode may go back to the previous screen instead of just exiting (was not clear to me) Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20180406203812.3087-3-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Andi Kleen 提交于
For perf mem report / perf mem record, pass all unknown options through to the underlying report/record commands. This makes things like perf mem record -a sleep 1 work. Matches how c2c and other tools work. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20180406203812.3087-2-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Introduced in a4ff8e86 ("mm: introduce MAP_FIXED_NOREPLACE"), and now that we have that define in the just syncronized tools/arch/*/include/uapi/asm/mman.h files, add support for it. This should really transition to autogeneration of string tables as done for various other things: $ ls /tmp/build/perf/trace/beauty/generated/*.c arch_errno_name_array.c kcmp_type_array.c madvise_behavior_array.c pkey_alloc_access_rights_array.c prctl_option_array.c $ head /tmp/build/perf/trace/beauty/generated/madvise_behavior_array.c static const char *madvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [8] = "FREE", [9] = "REMOVE", [10] = "DONTFORK", [11] = "DOFORK", $ Till then, add support for this the old way. Also it has to be ifdef'ed, because arches like mips still don't define it. The proper solution will be to have per-arch tables for these values to support cross-analysis. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-td9t5vhjltqnlzaurkkgq8cn@git.kernel.orgSignef-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 18 4月, 2018 1 次提交
-
-
由 Michael Ellerman 提交于
In commit ce290a19 ("selftests: add devpts selftests"), the filesystems directory was added to the top-level selftests Makefile. That had the effect of causing the existing dnotify_test in the filesystems directory to now be run as part of the default selftests test-run. Unfortunately dnotify_test is actually an infinite loop. Fix it by moving dnotify_test to TEST_GEN_PROGS_EXTENDED, which says that it's a generated file (ie. built) but should not be run as part of the default test suite run (it's an "extended" test). While we're here cleanup a few other things, devpts_pts should be in TEST_GEN_PROGS to indicate that it's built, and with the above two changes we no longer need a custom all or clean rule. Fixes: ce290a19 ("selftests: add devpts selftests") Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Acked-by: NChristian brauner <christian.brauner@ubuntu.com> Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>
-
- 17 4月, 2018 5 次提交
-
-
由 Thomas Richter 提交于
'perf list' with flags -d and -v print a description (-d) or a very verbose explanation (-v) of CPU specific counter events. These descriptions are provided with the json files in directory pmu-events/arch/s390/*.json. Display of these descriptions on s390 requires the corresponding json files. On s390 this does not work because function is_pmu_core() does not detect the s390 directory name where the CPU specific events are listed. On x86 it is: /sys/bus/event_source/devices/cpu whereas on s390 it is: /sys/bus/event_source/devices/cpum_cf /sys/bus/event_source/devices/cpum_sf Fix this by adding s390 directory name testing to function is_pmu_core(). This is the same approach as taken for the ARM platform. Output before: [root@s35lp76 perf]# ./perf list -d pmu List of pre-defined events (to be used in -e): cpum_cf/AES_BLOCKED_CYCLES/ [Kernel PMU event] cpum_cf/AES_BLOCKED_FUNCTIONS/ [Kernel PMU event] cpum_cf/AES_CYCLES/ [Kernel PMU event] cpum_cf/AES_FUNCTIONS/ [Kernel PMU event] .... cpum_cf/TX_NC_TEND/ [Kernel PMU event] cpum_cf/VX_BCD_EXECUTION_SLOTS/ [Kernel PMU event] cpum_sf/SF_CYCLES_BASIC/ [Kernel PMU event] Output after: [root@s35lp76 perf]# ./perf list -d pmu List of pre-defined events (to be used in -e): cpum_cf/AES_BLOCKED_CYCLES/ [Kernel PMU event] cpum_cf/AES_BLOCKED_FUNCTIONS/ [Kernel PMU event] cpum_cf/AES_CYCLES/ [Kernel PMU event] cpum_cf/AES_FUNCTIONS/ [Kernel PMU event] .... cpum_cf/TX_NC_TEND/ [Kernel PMU event] cpum_cf/VX_BCD_EXECUTION_SLOTS/ [Kernel PMU event] cpum_sf/SF_CYCLES_BASIC/ [Kernel PMU event] 3906: bcd_dfp_execution_slots [BCD DFP Execution Slots] decimal_instructions [Decimal Instructions] dtlb2_gpage_writes [DTLB2 GPAGE Writes] dtlb2_hpage_writes [DTLB2 HPAGE Writes] dtlb2_misses [DTLB2 Misses] dtlb2_writes [DTLB2 Writes] itlb2_misses [ITLB2 Misses] itlb2_writes [ITLB2 Writes] l1c_tlb2_misses [L1C TLB2 Misses] ..... cfvn 3: cpu_cycles [CPU Cycles] instructions [Instructions] l1d_dir_writes [L1D Directory Writes] l1d_penalty_cycles [L1D Penalty Cycles] l1i_dir_writes [L1I Directory Writes] l1i_penalty_cycles [L1I Penalty Cycles] problem_state_cpu_cycles [Problem State CPU Cycles] problem_state_instructions [Problem State Instructions] .... csvn generic: aes_blocked_cycles [AES Blocked Cycles] aes_blocked_functions [AES Blocked Functions] aes_cycles [AES Cycles] aes_functions [AES Functions] dea_blocked_cycles [DEA Blocked Cycles] dea_blocked_functions [DEA Blocked Functions] .... Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: NMark Rutland <mark.rutland@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180416132314.33249-1-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Alexey Budankov 提交于
Append 'p' sign to 'S' tag designating the type of context switch out event so 'Sp' means preemption context switch. Documentation is extended to cover new presentation changes. $ perf script --show-switch-events -F +misc -I -i perf.data: hdparm 4073 [004] U 762.198265: 380194 cycles:ppp: 7faf727f5a23 strchr (/usr/lib64/ld-2.26.so) hdparm 4073 [004] K 762.198366: 441572 cycles:ppp: ffffffffb9218435 alloc_set_pte (/lib/modules/4.16.0-rc6+/build/vmlinux) hdparm 4073 [004] S 762.198391: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 swapper 0 [004] 762.198392: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 4073/4073 swapper 0 [004] Sp 762.198477: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 4073/4073 hdparm 4073 [004] 762.198478: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 swapper 0 [007] K 762.198514: 2303073 cycles:ppp: ffffffffb98b0c66 intel_idle (/lib/modules/4.16.0-rc6+/build/vmlinux) swapper 0 [007] Sp 762.198561: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 1134/1134 kworker/u16:18 1134 [007] 762.198562: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 kworker/u16:18 1134 [007] S 762.198567: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 Signed-off-by: NAlexey Budankov <alexey.budankov@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5fc65ce7-8ca5-53ae-8858-8ddd27290575@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Alexey Budankov 提交于
Print additional 'preempt' tag for PERF_RECORD_SWITCH[_CPU_WIDE] OUT records when event header misc field contains PERF_RECORD_MISC_SWITCH_OUT_PREEMPT bit set designating preemption context switch out event: tools/perf/perf report -D -i perf.data | grep _SWITCH 0 768361415226 0x27f076 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 8/8 4 768362216813 0x28f45e [0x28]: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0 4 768362217824 0x28f486 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 4073/4073 0 768362414027 0x27f0ce [0x28]: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 8/8 0 768362414367 0x27f0f6 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0 Signed-off-by: NAlexey Budankov <alexey.budankov@linux.intel.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/6f5aebb9-b96c-f304-f08f-8f046d38de4f@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Alexey Budankov 提交于
Store preempting context switch out event into Perf trace as a part of PERF_RECORD_SWITCH[_CPU_WIDE] record. Percentage of preempting and non-preempting context switches help understanding the nature of workloads (CPU or IO bound) that are running on a machine; The event is treated as preemption one when task->state value of the thread being switched out is TASK_RUNNING. Event type encoding is implemented using PERF_RECORD_MISC_SWITCH_OUT_PREEMPT bit; Signed-off-by: NAlexey Budankov <alexey.budankov@linux.intel.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/9ff84e83-a0ca-dd82-a6d0-cb951689be74@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ingo Molnar 提交于
Sync the following tooling headers with the latest kernel version: tools/arch/arm/include/uapi/asm/kvm.h - New ABI: KVM_REG_ARM_* tools/arch/x86/include/asm/required-features.h - Removal of NEED_LA57 dependency tools/arch/x86/include/uapi/asm/kvm.h - New KVM ABI: KVM_SYNC_X86_* tools/include/uapi/asm-generic/mman-common.h - New ABI: MAP_FIXED_NOREPLACE flag tools/include/uapi/linux/bpf.h - New ABI: BPF_F_SEQ_NUMBER functions tools/include/uapi/linux/if_link.h - New ABI: IFLA tun and rmnet support tools/include/uapi/linux/kvm.h - New ABI: hyperv eventfd and CONN_ID_MASK support plus header cleanups tools/include/uapi/sound/asound.h - New ABI: SNDRV_PCM_FORMAT_FIRST PCM format specifier tools/perf/arch/x86/entry/syscalls/syscall_64.tbl - The x86 system call table description changed due to the ptregs changes and the renames, in: d5a00528: syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*() 5ac9efa3: syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention ebeb8c82: syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32 Also fix the x86 syscall table warning: -Warning: Kernel ABI header at 'tools/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' +Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' None of these changes impact existing tooling code, so we only have to copy the kernel version. Signed-off-by: NIngo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brian Robbins <brianrob@microsoft.com> Cc: Clark Williams <williams@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Dmitriy Vyukov <dvyukov@google.com> <dvyukov@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Sandipan Das <sandipan@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Takuya Yamamoto <tkydevel@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: William Cohen <wcohen@redhat.com> Cc: Yonghong Song <yhs@fb.com> Link: http://lkml.kernel.org/r/20180416064024.ofjtrz5yuu3ykhvl@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-