This patch reduces contention of printks.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch exposes what features are supported by current f2fs build to sysfs
entry via:

/sys/fs/f2fs/features/
/sys/fs/f2fs/dev/features
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds to support inode checksum in f2fs.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix verification flow]
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This must return size, not error number.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Let node writeback also do f2fs_balance_fs to ensure there are always enough free
segments.
Signed-off-by: NYunlong Song <yunlong.song@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch introduces f2fs_statfs_project, it enables to show usage
status of directory tree which is limited with project quota.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR ioctl interface
support for f2fs. The interface is kept consistent with the one
of ext4/xfs.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We have a node chain to serialize node block writes, so if any IOs for
node block writes are reordered, we'll get broken node chain. IOWs,
roll-forward recovery will see all or none node blocks given fsync
mark.

E.g.,
Node chain consists of:
 N1 -> N2 -> N3 -> NFSYNC -> N1' -> N2' -> N'FSYNC

Reordered to:
1) N1 -> N2 -> N3 -> N2' -> NFSYNC -> N'FSYNC -> power-cut
2) N1 -> N2 -> N3 -> N1' -> NFSYNC -> power-cut
3) N1 -> N2 -> NFSYNC -> N1' -> N'FSYNC -> N3 -> power-cut
4) N1 -> NFSYNC -> N1' -> N2' -> N'FSYNC -> N3 -> power-cut

Roll-forward recovery can proceed to:
1) N1 -> N2 -> N3 -> NFSYNC -> X
2) N1 -> N2 -> N3 -> NFSYNC -> N1' -> X
3) N1 -> N2 -> N3 -> FSYNC -> N1' -> X
4) N1 -> X
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch changes the function names of sysfs init to follow ext4.

f2fs_init_sysfs <-> f2fs_register_sysfs
f2fs_exit_sysfs <-> f2fs_unregister_sysfs
Suggested-by: NChao Yu <yuchao0@huawei.com>
Reivewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds to support plain project quota.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In ->lookup(), we will have a try to recover dot or dotdot for
corrupted directory, once disk quota is on, if it allocates new
block during dotdot recovery, we need to record disk quota info
for the allocation, so this patch fixes this issue by adding
missing dquot_initialize() in __recover_dot_dentries.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline
to indicate that on-disk structure of current inode is extended.

In order to extend, we changed the inode structure a bit:

Original one:

struct f2fs_inode {
	...
	struct f2fs_extent i_ext;
	__le32 i_addr[DEF_ADDRS_PER_INODE];
	__le32 i_nid[DEF_NIDS_PER_INODE];
}

Extended one:

struct f2fs_inode {
        ...
        struct f2fs_extent i_ext;
	union {
		struct {
			__le16 i_extra_isize;
			__le16 i_padding;
			__le32 i_extra_end[0];
		};
		__le32 i_addr[DEF_ADDRS_PER_INODE];
	};
        __le32 i_nid[DEF_NIDS_PER_INODE];
}

Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of
i_addr field for storing i_extra_isize and i_padding. with i_extra_isize,
we can calculate actual size of reserved space in i_addr, available
attribute fields included in total extra attribute fields for current
inode can be described as below:

  +--------------------+
  | .i_mode            |
  | ...                |
  | .i_ext             |
  +--------------------+
  | .i_extra_isize     |-----+
  | .i_padding         |     |
  | .i_prjid           |     |
  | .i_atime_extra     |     |
  | .i_ctime_extra     |     |
  | .i_mtime_extra     |<----+
  | .i_inode_cs        |<----- store blkaddr/inline from here
  | .i_xattr_cs        |
  | ...                |
  +--------------------+
  |                    |
  |    block address   |
  |                    |
  +--------------------+
  | .i_nid             |
  +--------------------+
  |   node_footer      |
  | (nid, ino, offset) |
  +--------------------+

Hence, with this patch, we would enhance scalability of f2fs inode for
storing more newly added attribute.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch tries to make below macros calculating max inline size,
inline dentry field size considerring reserving size-changeable
space:
- MAX_INLINE_DATA
- NR_INLINE_DENTRY
- INLINE_DENTRY_BITMAP_SIZE
- INLINE_RESERVED_SIZE

Then, when inline_{data,dentry} options is enabled, it allows us to
reserve inline space with different size flexibly for adding newly
introduced inode attribute.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds an ioctl to provide feature information to user.
For exapmle, SQLite can use this ioctl to detect whether f2fs support atomic
write or not.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

When ->freeze_fs is called from lvm for doing snapshot, it needs to
make sure there will be no more changes in filesystem's data, however,
previously, background threads like GC thread wasn't aware of freezing,
so in environment with active background threads, data of snapshot
becomes unstable.

This patch fixes this issue by adding sb_{start,end}_intwrite in
below background threads:
- GC thread
- flush thread
- discard thread

Note that, don't use sb_start_intwrite() in gc_thread_func() due to:

generic/241 reports below bug:

 ======================================================
 WARNING: possible circular locking dependency detected
 4.13.0-rc1+ #32 Tainted: G           O
 ------------------------------------------------------
 f2fs_gc-250:0/22186 is trying to acquire lock:
  (&sbi->gc_mutex){+.+...}, at: [<f8fa7f0b>] f2fs_sync_fs+0x7b/0x1b0 [f2fs]

 but task is already holding lock:
  (sb_internal#2){++++.-}, at: [<f8fb5609>] gc_thread_func+0x159/0x4a0 [f2fs]

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #2 (sb_internal#2){++++.-}:
        __lock_acquire+0x405/0x7b0
        lock_acquire+0xae/0x220
        __sb_start_write+0x11d/0x1f0
        f2fs_evict_inode+0x2d6/0x4e0 [f2fs]
        evict+0xa8/0x170
        iput+0x1fb/0x2c0
        f2fs_sync_inode_meta+0x3f/0xf0 [f2fs]
        write_checkpoint+0x1b1/0x750 [f2fs]
        f2fs_sync_fs+0x85/0x1b0 [f2fs]
        f2fs_do_sync_file.isra.24+0x137/0xa30 [f2fs]
        f2fs_sync_file+0x34/0x40 [f2fs]
        vfs_fsync_range+0x4a/0xa0
        do_fsync+0x3c/0x60
        SyS_fdatasync+0x15/0x20
        do_fast_syscall_32+0xa1/0x1b0
        entry_SYSENTER_32+0x4c/0x7b

 -> #1 (&sbi->cp_mutex){+.+...}:
        __lock_acquire+0x405/0x7b0
        lock_acquire+0xae/0x220
        __mutex_lock+0x4f/0x830
        mutex_lock_nested+0x25/0x30
        write_checkpoint+0x2f/0x750 [f2fs]
        f2fs_sync_fs+0x85/0x1b0 [f2fs]
        sync_filesystem+0x67/0x80
        generic_shutdown_super+0x27/0x100
        kill_block_super+0x22/0x50
        kill_f2fs_super+0x3a/0x40 [f2fs]
        deactivate_locked_super+0x3d/0x70
        deactivate_super+0x40/0x60
        cleanup_mnt+0x39/0x70
        __cleanup_mnt+0x10/0x20
        task_work_run+0x69/0x80
        exit_to_usermode_loop+0x57/0x92
        do_fast_syscall_32+0x18c/0x1b0
        entry_SYSENTER_32+0x4c/0x7b

 -> #0 (&sbi->gc_mutex){+.+...}:
        validate_chain.isra.36+0xc50/0xdb0
        __lock_acquire+0x405/0x7b0
        lock_acquire+0xae/0x220
        __mutex_lock+0x4f/0x830
        mutex_lock_nested+0x25/0x30
        f2fs_sync_fs+0x7b/0x1b0 [f2fs]
        f2fs_balance_fs_bg+0xb9/0x200 [f2fs]
        gc_thread_func+0x302/0x4a0 [f2fs]
        kthread+0xe9/0x120
        ret_from_fork+0x19/0x24

 other info that might help us debug this:

 Chain exists of:
   &sbi->gc_mutex --> &sbi->cp_mutex --> sb_internal#2

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(sb_internal#2);
                                lock(&sbi->cp_mutex);
                                lock(sb_internal#2);
   lock(&sbi->gc_mutex);

  *** DEADLOCK ***

 1 lock held by f2fs_gc-250:0/22186:
  #0:  (sb_internal#2){++++.-}, at: [<f8fb5609>] gc_thread_func+0x159/0x4a0 [f2fs]

 stack backtrace:
 CPU: 2 PID: 22186 Comm: f2fs_gc-250:0 Tainted: G           O    4.13.0-rc1+ #32
 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
 Call Trace:
  dump_stack+0x5f/0x92
  print_circular_bug+0x1b3/0x1bd
  validate_chain.isra.36+0xc50/0xdb0
  ? __this_cpu_preempt_check+0xf/0x20
  __lock_acquire+0x405/0x7b0
  lock_acquire+0xae/0x220
  ? f2fs_sync_fs+0x7b/0x1b0 [f2fs]
  __mutex_lock+0x4f/0x830
  ? f2fs_sync_fs+0x7b/0x1b0 [f2fs]
  mutex_lock_nested+0x25/0x30
  ? f2fs_sync_fs+0x7b/0x1b0 [f2fs]
  f2fs_sync_fs+0x7b/0x1b0 [f2fs]
  f2fs_balance_fs_bg+0xb9/0x200 [f2fs]
  gc_thread_func+0x302/0x4a0 [f2fs]
  ? preempt_schedule_common+0x2f/0x4d
  ? f2fs_gc+0x540/0x540 [f2fs]
  kthread+0xe9/0x120
  ? f2fs_gc+0x540/0x540 [f2fs]
  ? kthread_create_on_node+0x30/0x30
  ret_from_fork+0x19/0x24

The deadlock occurs in below condition:
GC Thread			Thread B
- sb_start_intwrite
				- f2fs_sync_file
				 - f2fs_sync_fs
				  - mutex_lock(&sbi->gc_mutex)
				   - write_checkpoint
				    - block_operations
				     - f2fs_sync_inode_meta
				      - iput
				       - sb_start_intwrite
 - mutex_lock(&sbi->gc_mutex)

Fix this by altering sb_start_intwrite to sb_start_write_trylock.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch resolves the below scenario.

== Process 1 ==     == Process 2 ==
open(w)             open(rw)
begin
write(new_#1)
process_crash
  f_op->flush
  locks_remove_posix
  f_op>release
                    read (new_#1)

In order to avoid corrupted database caused by new_#1, we must do roll-back
at process_crash time. In order to check that, this patch keeps task which
triggers transaction begin, and does roll-back in f_op->flush before removing
file locks.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

It'd be better to retry writing atomic pages when we get -ENOMEM.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

When changing a file's acl mask, __f2fs_set_acl() will first set the
group bits of i_mode to the value of the mask, and only then set the
actual extended attribute representing the new acl.

If the second part fails (due to lack of space, for example) and the
file had no acl attribute to begin with, the system will from now on
assume that the mask permission bits are actual group permission bits,
potentially granting access to the wrong users.

Prevent this by only changing the inode mode after the acl has been set.
Signed-off-by: NErnesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

recovery file A:			recovery file B:
	-get_dnode_of_data
		-alloc_nid
					-recover_xattr_data
						-set_node_addr(sbi, &ni, NEW_ADDR, false);
							--->bug_on for nid has been used by file A

In recovery process, new allocated node blocks may "reuse" xattr block
nids, this patch alloc new nids for xattr blocks in recovery process to
avoid this problem.
Signed-off-by: NYunlei He <heyunlei@huawei.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Use f2fs_dentry_ptr structure to indicate inline dentry structure as
much as possible, so we can wrap inline dentry with size-fixed fields
to the one with size-changeable fields. With this change, we can
handle size-changeable inline dentry more easily.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch remove unused input parameter in function
new_node_page.
Signed-off-by: NYunlei He <heyunlei@huawei.com>
Signed-off-by: NYong Sheng <shengyong1@huawei.com>
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Pull SCSI fixes from James Bottomley:
 "Three small fixes.

  The transfer size fixes are actually correcting some performance drops
  on the hpsa and smartpqi cards. The cards actually have an internal
  cache for request speed up but bypass it for transfers > 1MB. Since
  4.3 the efficiency of our merges has rendered the cache mostly unused,
  so limit transfers to under 1MB to recover the cache boost"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sg: fix static checker warning in sg_is_valid_dxfer
  scsi: smartpqi: limit transfer length to 1MB
  scsi: hpsa: limit transfer length to 1MB

Pull uuid fixes from Christoph Hellwig:

 - add a missing "!" in the uuid tests

 - remove the last remaining user of the uuid_be type, and then the type
   and its helpers

* tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid:
  uuid: remove uuid_be
  thunderbolt: use uuid_t instead of uuid_be
  uuid: fix incorrect uuid_equal conversion in test_uuid_test

Pull dma mapping fixes from Christoph Hellwig:
 "split the global dma coherent pool from the per-device pool.

  This fixes a regression in the earlier 4.13 pull requests where the
  global pool would override a per-device CMA pool (Vladimir Murzin)"

* tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping:
  ARM: NOMMU: Wire-up default DMA interface
  dma-coherent: introduce interface for default DMA pool

Pull JFS fixes from David Kleikamp.

* tag 'jfs-4.13' of git://github.com/kleikamp/linux-shaggy:
  jfs: preserve i_mode if __jfs_set_acl() fails
  jfs: Don't clear SGID when inheriting ACLs
  jfs: atomically read inode size

Pull HID fixes from Jiri Kosina:

 - regression fix (missing IRQs) for devices that require 'always poll'
   quirk, from Dmitry Torokhov

 - new device ID addition to Ortek driver, from Benjamin Tissoires

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: ortek: add one more buggy device
  HID: usbhid: fix "always poll" quirk

Pull s390 fixes from Martin Schwidefsky:
 "Three bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/mm: set change and reference bit on lazy key enablement
  s390: chp: handle CRW_ERC_INIT for channel-path status change
  s390/perf: fix problem state detection

Everything uses uuid_t now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

Switch thunderbolt to the new uuid type.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>

The iHome keypad also requires the same tweak we are doing for other
Ortek devices.
Reported-by: NMairin Duffy <duffy@redhat.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This adds a perl script to actually parse the MAINTAINERS file, clean up
some whitespace in it, warn about errors in it, and then properly sort
the end result.

My perl-fu is atrocious, so the script has basically been created by
randomly putting various characters in a pile, mixing them around, and
then looking it the end result does anything interesting when used as a
perl script.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Prepping for scripting the MAINTAINERS file cleanup (and possible split)
showed a couple of cases where the headers for a couple of entries were
bogus.

There's a few different kinds of bogosities:

 - the X-GENE SOC EDAC case was confused and split over two lines

 - there were four entries for "GREYBUS PROTOCOLS DRIVERS" that were all
   different things.

 - the NOKIA N900 CAMERA SUPPORT" was duplicated

all of which were more obvious when you started doing associative arrays
in perl to track these things by the header (so that we can alphabetize
this thing properly, and so that we might split it up by the data too).

Cc: Joe Perches <joe@perches.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull xen fixes from Juergen Gross:
 "Some fixes and cleanups for running under Xen"

* tag 'for-linus-4.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: don't online new memory initially
  xen/x86: fix cpu hotplug
  xen/grant-table: log the lack of grants
  xen/x86: Don't BUG on CPU0 offlining

When setting up the Xenstore watch for the memory target size the new
watch will fire at once. Don't try to reach the configured target size
by onlining new memory in this case, as the current memory size will
be smaller in almost all cases due to e.g. BIOS reserved pages.

Onlining new memory will lead to more problems e.g. undesired conflicts
with NVMe devices meant to be operated as block devices.

Instead remember the difference between target size and current size
when the watch fires for the first time and apply it to any further
size changes, too.

In order to avoid races between balloon.c and xen-balloon.c init calls
do the xen-balloon.c initialization from balloon.c.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

Commit dc6416f1 ("xen/x86: Call
cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()")
introduced an error leading to a stack overflow of the idle task when
a cpu was brought offline/online many times: by calling
cpu_startup_entry() instead of returning at the end of xen_play_dead()
do_idle() would be entered again and again.

Don't use cpu_startup_entry(), but cpuhp_online_idle() instead allowing
to return from xen_play_dead().

Cc: <stable@vger.kernel.org> # 4.12
Signed-off-by: NJuergen Gross <jgross@suse.com>
Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

log a message when we enter this situation:
1) we already allocated the max number of available grants from hypervisor
and
2) we still need more (but the request fails because of 1)).

Sometimes the lack of grants causes IO hangs in xen_blkfront devices.
Adding this log would help debuging.
Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

CONFIG_BOOTPARAM_HOTPLUG_CPU0 allows to offline CPU0 but Xen HVM guests
BUG() in xen_teardown_timer(). Remove the BUG_ON(), this is probably a
leftover from ancient times when CPU0 hotplug was impossible, it works
just fine for HVM.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>

Merge tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Avoid buffer overruns in applesmc driver"

* tag 'hwmon-for-linus-v4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (applesmc) Avoid buffer overruns

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 4.13-rc2. Nothing
  huge at all, a revert of a patch that turned out to break things, a
  fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi
  definition correct, and a few minor serial driver fixes for reported
  issues.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Fix TIOCGPTPEER ioctl definition
  tty: hide unused pty_get_peer function
  tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART
  serial: imx: Prevent TX buffer PIO write when a DMA has been started
  Revert "serial: imx-serial - move DMA buffer configuration to DT"
  serial: sh-sci: Uninitialized variables in sysfs files
  serial: st-asc: Potential error pointer dereference